Is the FLSUN Super Racer WORTH it in 2023?!?!

Рет қаралды 17,857

Күн бұрын

Discover if the FLSUN Super Racer Delta 3D Printer remains an impressive value in 2023! In this 12-minute video, we thoroughly review its features, performance, and compare it to other printers on the market. With a staggering print speed of 200 mm/s, we showcase its capabilities and discuss its print quality. Join us as we evaluate its affordability and help you decide if it's the right choice for your 3D printing needs. Don't miss out on this comprehensive review - watch now!
Tested Files:
Sinking Benchy: cults3d.com/en/3d-model/tool/...
Low Poly Wolf: www.printables.com/model/3863...
Vase: www.printables.com/model/3538...
Question Block: www.printables.com/model/4713...
Dino: www.printables.com/model/4254...
Instagram: / theprinthouseyt
Discord: / discord
Twitter: / thyprinthouse
#flsun #3dprinting #3dprinter
0:00 Introduction and Printer Build
2:36 Thank You
3:06 Specs and Details
5:56 User Interface
7:02 Printing Results

Пікірлер: 67

@Xenoprophet 7 ай бұрын

I learned recently that having a good roller for the filament reel helped my prints out a lot for a different printer, I just bought my delta on sale and can't wait to make use of it!

@tHaH4x0r 3 ай бұрын

I owned this printer for quite some time before my current printer (X1C). Still miss it sometimes, watching the delta movement is mesmerizing, and it was incredibly quiet. The only noticeable noise was retraction noises from the stepper. You can literally have it next to you on your desk and you wouldn't be bothered by it. Can't say the same about the X1C. Once a filament is set up, it is literally set and forget. Can't say I have had similar problems to you regarding quality. Very reliable, I personally did not have a single issue with this printer over its life. One has to keep in mind when this printer was released. During that time there were many small innovations that weren't that common yet, yet this printer had almost all of them. Autoleveling, silent stepper drivers, almost automatic procedure for printing etc. At the time when it was released, 'modern' core XY machines weren't that common, so it did offer a substantial upgrade over traditional Cartesian designs. I could print designs roughly 2x faster than before. Similarly, when it came out flexible build plates were not super common. The reason why I upgraded to the X1C wasn't the speed, but the ability to print technical materials and ABS (chamber, higher temp nozzle), and also a larger build volume. Part cooling fans are an easy upgrade, which I indeed definitely recommend.

@Scratchy8644 2 ай бұрын

You can put the extruder stepper motor in silent mode with a gcode line, (on the flsun sr). I still own mine and upgrading it soon with the klipper pad to extend its life. Not a single issue with it so far. The new flsun T1 is going to be my next one probably.

@flsun3dprinter Жыл бұрын

Thank you, my friend, for using our printers and for endorsing them. I will say, however, that the print will be better if you clean the PEI. A wipe with alcohol will do the trick. I hope this will give you a better experience.

@ThePrintHouse Жыл бұрын

Thank you so much for giving me the opportunity to test the printer! I honestly do like the SR. It has klipper now and I will work on roughly calibrating it to be a little more precise. As for cleaning the glass, I will definitely clean it. The dirty glass actually happened on the final main print that I made for the video (the question block). I have never has good luck printing on glass. It not only your printer. I have printed on many brands of printers with glass and I do not like the experience. Usually items with large surface area are very hard to remove, at least with my printing workflow.

@xnetworkDEVILx 10 ай бұрын

Well give him a v400 to review it ❤

@rootstriker8209 7 ай бұрын

Hey man I love your deltas they are the best. I bought a Q5 when they first cam out and that thing was an absolute beast of a machine. Did everything I threw at it flawlessly. I literally just bought a super racer on Amazon 15 minutes ago

@persiustudio 5 ай бұрын

Hi FLSun can i find somewhere any slicer profile for the SuperRacer printer? Prusa/Cura/Orca...doesn't matter which just to have some base profile to tweak and calibrate from. Please

@rootstriker8209 5 ай бұрын

@persiustudio I found an orca slicer profile on the net, I'll find for you when I get home.

@RAZERTAHP Жыл бұрын

Got mine open box from micro center for 200$ basically like new condition. Out of the dozen printers I’ve bought that was by far the best purchase

@law_sensei 11 ай бұрын

I want to buy one, but I'm not sure if it fits in my suitcase. Is it possible to bring it in a plane suitcase? of the 22 kilograms?

@MeliacPropulsionLaboratory 7 ай бұрын

@@law_sensei definitely not

@Samantha1642 9 ай бұрын

Thank I receive mine in a few days!!! Just liked and subscribed thanks so much for all the info keep bringing more? Also very new is there any really good sites for the STL files?

@ThePrintHouse 9 ай бұрын

Thanks for the sub!!! Joint the discord as well, the link is in the description!! My go to stl site has been printables for a year now, but apparently thingiverse got a major update (it used to be run down) so it's probably a good option again. Cults3d is great for paid models, but not really for browsing. Only if someone links you a model to purchase.

@MattHoward1 11 ай бұрын

Do you have a link to the part cooling duct you printed?

@samgutz80015 3 ай бұрын

Thank you! Good information

@JonLaRue Жыл бұрын

Even with all of the problems my machine has had, i love it. I have needed to swap the extruder out, the bed (it cracked), and plan to swap the hotend out to a real volcano.

@milostomic5692 Жыл бұрын

What are your cura setting for flsun?

@alanday5255 8 ай бұрын

So what about the supposed off-gasing issue when trying to speed print with PTEG?

@jimcsnr 11 ай бұрын

For some reason they did put in the cheapest extruder money can buy. I had mine delivered 2 days ago and immediately on the first print I could see the extruder needed to be changed. I'm waiting for a OMG V2S All Metal Gears extruder to be delivered. And, yes I did purchase a pei plate from Amazon which is arriving tomorrow. Other than that a few mods and it's good to go. To be honest I had a lot less hassle setting up the Q5 directly out of the box.

@TheCraftySmith89 5 ай бұрын

So this has been my first printer, I didn't want to hassle with the Ender systems. Really it's been great but have been having issues with build plate adhesion

@ThePrintHouse 5 ай бұрын

I would personally recommend the pei plate upgrade. Pei sheet are so much better

@TheCraftySmith89 5 ай бұрын

@@ThePrintHouse how often do you have to replace those though?

@furniksadventures9660 3 ай бұрын

@@TheCraftySmith89 never if u dont scratch it

@papucstalpgaming8918 7 ай бұрын

Hi! I buy one flsun and i now start the printing so i dont know a lot of things , can u send me the filaments type plz ? THX

@steelplasma256 9 ай бұрын

One thing about the glass bed, if you let it fully cooldown to room temperature then it pops right off with little resistance..... except large flat surfaces.

@ThePrintHouse 9 ай бұрын

I have had hit or miss luck with medium objects on glass beds when cooled and absolutely no luck with large objects

@bunkie2100 5 ай бұрын

One of the great things about the fixed bed is that you can be a bit enthusiastic removing prints from the bed. I keep a very small hammer and give prints a little love tap which quickly frees them (and, often, sends them flying, which is a bit of a downside).

@chrismay2298 4 ай бұрын

Easy to put on Klipper and Micro Center had them for $250 a couple weeks ago. Absolute steal. Paid $1000 used for my SeeMeCNC Rostock and it was tough to get it to print as fast at not as good quality.

@ThePrintHouse 4 ай бұрын

I really like this printer. I don't use it much though. I can't wait to see what the next Flsun has to offer

@travisg2303 3 ай бұрын

@@ThePrintHouseit's ridiculous. For $1.9k for 1200 mm/s.

@MikkeyFacts 8 ай бұрын

I have a couple of resin printers but i am curious to get a filament printer. I would like a silent printer as I live in an apartment and i know some of these other printers sound like jet planes.

@ThePrintHouse 8 ай бұрын

I think this printer is quiet, but the hotend cooling isnt adequate, so after that upgrade it will get louder. If volume is important to you, I think there are better options.

@MikkeyFacts 8 ай бұрын

Okay I see. Thank you for your response. What options could that be?

@The_Freddy_show Жыл бұрын

Hey I am having a issue on the hot end pull thing one of the baring is loose it not staying

@ThePrintHouse Жыл бұрын

Click the link in the description and join my discord. We might be able to help you out :)

@The_Freddy_show Жыл бұрын

@@ThePrintHouse thank you

@MrBaskins2010 Күн бұрын

love delta printers. this printer is a great pickup in 2024 for 300 bucks

@GonnerMeLeggies 5 сағат бұрын

I just ordered one on prime day for 180. Been waiting for years for a flsun delta to go under 200.

@TheBinklemNetwork 11 күн бұрын

Had such a hassle with an ender 3 v2 neo and am running about getting this printer Edit: thinking, not running

@3n3rgy90 8 ай бұрын

As a European, this tape measure looks wild with all these 1/4, 3/8, 1/2. We just use numbers 1 to 300cm

@ThePrintHouse 8 ай бұрын

I don't claim the stupid measurement system we use 👀🤣

@XavierAfton1979 8 ай бұрын

Dude you look like Nicklas cruze

@ThePrintHouse 8 ай бұрын

It is he that looks like me, though I dont like that given his past hahahhaha

@sashanovak9221 Жыл бұрын

Nice vid but I this printer is more about efficiency than quality

@ThePrintHouse Жыл бұрын

I have now installed klipper on the printer, so I will do some minor calibration and see what changes. It might be about efficiency, but I do think that it should be capable of high precision parts. It shouldnt be too hard to get it to that point.

@richnbeauty 8 ай бұрын

@ThePrintHouse 8 ай бұрын

@mynameisprivate158 9 ай бұрын

I totally disagree. I print on glass with gluestick and wouldn't want to print on anything else!

@ThePrintHouse 9 ай бұрын

My biggest issue with glass is that large objects do not release from it. Flexible PEI seems to be where the industry is headed.

@TheBinklemNetwork 11 күн бұрын

Have you tried a salt water solution instead of glue?

@travisg2303 3 ай бұрын

You forced it to fail the caliper test by not knowing how to use calipers. And watching you be unable to wait 2 minutes for the build plate to cool off so the pieces come off with pinky pressure, that was just strange. Are you 12 and have to have everything now now now noooow?

@ThePrintHouse 3 ай бұрын

No matter how much you wait, if you have a large surface area print on a glass bed, you will have a nightmare removing it :)

@travisg2303 3 ай бұрын

@@ThePrintHouse It's not exactly a glass bed though. I own this printer. When it's cool, I can gently press on the side of the print and it slides. Did you use glue? On glass, I always used a stick. Never on this printer.