Love my KP3S! I flashed klipper onto it almost immediately, but got some quality prints stock. Ended up adding dual Z linear rails, a PEI sheet, 3d printed power supply base, and an H2 toolhead. It's now my dedicated "just works" printer that I can rely on to print ABS/ASA printer parts
@OregonDuck Жыл бұрын
Yeah you say all this but can you print a tpu Eiffel Tower?
@WTF_BBQ Жыл бұрын
What does klipper do?
@connorcleveland9166 Жыл бұрын
@@WTF_BBQ klipper is an alternative firmware to marlin firmware that let's you do some cool things like edit firmware values in a config file instead of reflashing and run gcode calculations on the more powerful processor you may be using for a web interface (octoprint/fluidd/etc) instead of them running on the low power builtin processor. Nero3d has a great video explaining klipper you should be able to find for a more detailed explanation.
@WTF_BBQ Жыл бұрын
@@connorcleveland9166 Sounds like this would be useful for people who run a print farm.
@armoth6958 Жыл бұрын
Hey I'm trying the H2 as well but for the life of me I cannot figure out how to connect the hotend to it..
@UncleJessy Жыл бұрын
$180? not bad at all. I really need to look into Klipper already
@heyitstor420 Жыл бұрын
Its great if you like to tinker and tune in everything
@jeffreyepiscopo Жыл бұрын
I use Klipper on my Voron and it's great. I keep thinking about using it on some of my Ender 3s. I bet it would be awesome.
@Cornish_Co Жыл бұрын
I have 2 KP3S printers and absolutely love them. They are solid machines and print flawlessly time after time. I use a smooth PEI sheet attached with small binder clips. Both printers are used to print custom brackets out of Polymaker ASA at 255°C. The only failure I've had is the hot end fan.
@trollonme Жыл бұрын
Kingroon is getting the recognition it deserves. Been preaching about it for months now. It's so good and consistent.
@how2tinker292 Жыл бұрын
Great video. Yes, I have a KP3S with the red extruder. I purchased it used for just $75 about a year ago. it appeared to be in near mint condition, except someone had dug a groove in the bed with the nozzle. I was planning on a PEI sheet anyway so that just made the deal sweeter. I use this printer almost every day, stock at the moment, and print more on it, with more consistent results than my Ender 3 S1. All I can say is that it just works. I did have a bearing fail on the x-axis belt end roller but it was a very easy and cheap fix. I highly recommend this printer to others.
@daliasprints9798 Жыл бұрын
Excited to see more on this printer. I don't have one, only a heavily modded Ender 3, but I'd absolutely recommend this over E3 for both use as-is out of the box and modding. It's such a better base, especially if you're aiming for speed.
@dontcallmebrave Жыл бұрын
I have the original version of the kp3s and other than some X belt bearings and upgraded fans (stock were noisy AF), it's been the most dependable printer I've owned. Prints always just work.
@Cobesh Жыл бұрын
One of the best printers. You buy, fold, level the table and prints TPU like a dream. And it's ridiculously cheap and quiet.
@peterclegg2609 Жыл бұрын
It's the most accurate printer I have, had it for about 18 months and its never let me down.
@Andredeamorim Жыл бұрын
I ended up with the ender 2 pro. It's a fantastic little printer as well and very reliable.
@muzykk6119 Жыл бұрын
It would be awesome if you made a video explaining how to get Klipperscreen working on that kind of hardware. I think it’s the cheapest way to get klipper and screen in one package.
@Hyozon Жыл бұрын
I've been using my kingroon for a long time now. No mods and I'm still printing minis I love.
@Robothut Жыл бұрын
Love the large tablet control display.
@RustyCoupe215 Жыл бұрын
Well, after several videos and research, looks like you helped sell me on this KP3. 😅
@woutererades933 Жыл бұрын
put klipper on mine, v6 volcano clone with .6 nozzle, bmg and pei sheet. 4k accel, 25+mm3/s flow. next upgrade is linear rails on z! it's a little beast. and that for 160 euro. (210-220 with upgrades)
@PrintingPerspective Жыл бұрын
Great video! For fast prototyping, it is an excellent printer even stock. This is why I fell in love with "small-factor" printers. But QC on these is a disaster, at least from my experience. However, if you are good at tinkering with stuff this printer will be a dream for you. :)
@omegadeepblue1407 Жыл бұрын
What is "QC"?
@PrintingPerspective Жыл бұрын
@@omegadeepblue1407 Quality Control
@omegadeepblue1407 Жыл бұрын
@@PrintingPerspective thanks.
@Waltkat Жыл бұрын
I've been using an original KP3 (not "S") for about a year and it has been performing perfectly. It has hundreds of hours on it so far and the only thing that needed replacing was the nozzle (replaced once). The only mods I've done are replacing the stock Z nut with an antibacklash nut and replacing the bed with a PEI spring steel bed. Still using the stock bed magnetic sheet as it holds the spring steel bed perfectly fine. Just bought a new KP3S for US$140 and again added an antibacklash Z nut and PEI bed using the stock magnet. So far so good. I like the relocated user screen that no longer gets blocked by the bed. The direct drive print head is nice, but I haven't noticed any difference in print quality vs the bowden system in my KP3.
@walkdontrunplz Жыл бұрын
Picked up a Pro and it's easily the best performing and low maintenance printer I've owned
@skaltura5 ай бұрын
that shirt design is amazing! :)
@SB911 Жыл бұрын
I have two with the older red extruder, im buying two more. Such a great little printer even stock!
@Heiserton Жыл бұрын
I would much rather have this over my Prusa Mini. The Mini is constantly having leveling issues and it’s very frustrating. It’s related to a shelf now.
@MrBaskins2010 Жыл бұрын
this printer really looks great even prior to your mods. gotta sit down and look into klipper some day
@ChasingtheKraken Жыл бұрын
Great video. Loved mine. I have owned 3 I think but each ended up clogging hard and never figured out why.
@substratum3d Жыл бұрын
Can't wait to flash klipper to my ender2pro. Not the same printer but pretty similar and totally worth the $99 I paid for it.
@jon9947 Жыл бұрын
Have you seen the new pro version of this printer? Getting rid of the linear rails on the bed seems like a step in the wrong direction, but otherwise it looks to have a few neat changes.
@aglsx9097 Жыл бұрын
Try doing the Ender 2 pro, it is roughly the same price and has a “silent board”. I found if you do t have the belts super tight the motors are stressed and the board is actually silent the fans are just loud
@bretmartell1912 Жыл бұрын
I’d love to see more about Klipper on the windows tablet 👍
@jasoncastle1741 Жыл бұрын
Can you do a video on how to run klipper on a tablet like that?
@Mr.melteds Жыл бұрын
oh hey i uhhhhh sorta got mentioned in the begining cool!!
@notchipotle Жыл бұрын
bought it for $150, great buy ngl, I sold all of my bigger printer and switch to ender 2 pro and kp3s and I wish I never buy those huge printers when I almost never print bigger than 150x150x150
@leonelectrical Жыл бұрын
Could you do a video on klipper on a tablet. I didn’t even know such a thing was possible. Mind blown 🤯
@mrmechano Жыл бұрын
All the mods you want to do come into the Kingroon KP3S Pro S1
@armoth6958 Жыл бұрын
I have 5 of them, definitely need some help to upgrade to klipper.. I've no experience with klipper at all.. also busy upgrading the hotends to be able to print higher Temps. The latter also not easy as I'm battling to properly attach and connect hotends. Thanks for great videos!
@MetalRhino42 Жыл бұрын
Please post a video when you get the new hot end installed!
@TinSVM10 ай бұрын
Hello, care to share a link for the magnetic PEI sheet you used? It looks nice.
@frankhovis6 ай бұрын
What is it about 3d printer manufacturers and MicroSD cards? Do they not think that its about time they started to use something /just slightly/ easier to use to get your print files onto the printer? You know.. like..a USB flash drive? Are they still living in the 1990s?
@beauregardslim1914 Жыл бұрын
I was carrying mine up the stairs the other day in one hand. It is almost palm-sized! I think it is a great machine for modding, but I definitely wouldn't recommend this to someone as a first printer. A significant number of these come with absolutely brutal Z wobble. I suspect that Kingroon swapped components without thinking. The fittings in the Z screw motor coupler are goofy loose *and* the Z screw nut mount is off center. Double wobble! Oh, and that horrible hot-end jams. The fixes are cheap and aren't hard for someone with experience but a newbie should get something else.
@luanmuraro2929 Жыл бұрын
You are absolutely right! It's my first and i'm having a big time trying to fix z wobble. Already tried changing the gantry and other stuffs and i'm still getting the same wobble on prints
@beauregardslim1914 Жыл бұрын
@@luanmuraro2929 Changing the motor-screw coupler (search Thingiverse for "self centering coupling") and adding an oldham coupler at the Z nut fixed it for me.
@JonS Жыл бұрын
Did you do input shaping after putting Klipper on it? This seems like a very nice value printer, but with a much more capable, and same build volume V-Minion I can't see that I'd use one. With your V-Minion sitting just behind you on the right, what made you do those projects on the KP3S?
@jeffreyepiscopo Жыл бұрын
That corn looks fantastic. What filaments did you use?
@craigbailey3580 Жыл бұрын
dont think i cant see that ledge 3d printer review when
@zk_6312 Жыл бұрын
Just wondering if you have tried printing ABS on this printer. I have yet to see a youtube video where they successfully printed ABS. One video comes to mind where the heated bad could only reach 80C and not 100C as it is advertised that it can reach. I am searching for a small printer like this that can actually print ABS so I can keep it in my garage.
@3sotErik Жыл бұрын
The Ender 2 Pro mini is on sail for $145. How does that compare?
@3rutu5 Жыл бұрын
any chance you can do a video on the klipper process for the old surface tablets?
@ArmyOfThree1000 Жыл бұрын
I love and hate mine because it likes to clog on filament changes sometimes I’d love to change out the hot end to a full metal one from slice engineering but I haven’t gotten around to it because I’m printing with it constantly
@Yavorh55 Жыл бұрын
I'd love a copy of your Klipper config since the pinouts are hard to find online. Still can't figure out the correct UART pin in order to adjust the amps on the drivers
@ultimatedude80 Жыл бұрын
So I was looking for a cheep direct drive.... mainly to print tpu so I am thinking of getting this
@SquareOneFPV Жыл бұрын
I'm diving into klipper, been reading up on it for days now. I'd also use a tablet for running klipper but how do you run klipper on it and use it as klipper screen at the same time? Great video btw, not even interested in this printer but still watched it 😅.
@Bastyyyyyy Жыл бұрын
Kp3s is my first 3d printer, and it was such a breez with that printer to get started, no difficutlies so far except 1 clogged nozzel after 5kg of PLA :D Bought mine for 149€ + free shipping on ebay. My printing bed is not 100% straight, its slighlty warped towards the middel. so i have to level the bed based on how big the print is. But i read online that if you buy the tempered glass plate it fixes that issue. i would personally update the fans, they are extremly loud, but for 3-4 hour prints its not that bad that i cant handel it. i have it in my basement and just leave the noise there. But in the beginning i had it next to my PC and it was too loud after 1-2 hours.
@FeWolf Жыл бұрын
LERDGE iX 3D Printer, wonder how they compare
@tomekkarnowski3049 Жыл бұрын
@ModBot Could you compare this printer with Ratrig v-minion? It looks like this printer needs some modding to achieve quality of v-minion?
@jalil.landero Жыл бұрын
Please make a video on how installing and run Klipper on the Windows tablet. I have 4 KP3S and one of them runs Klipper from a Macbook Air 2nd Gen with Ubuntu, however I am looking for a more compact option and the tablet would be excellent for that; especially because there are Windows tablets from 180 dlls (the same that costs a Pi 4 with accessories currently).
@SEKOTOLAND7 ай бұрын
Could you share Klipper configs files and template of Cura?
@thehess6 Жыл бұрын
Anyone know if it can run m600 command (change filament/ color during print)?
@Wulf_Mane Жыл бұрын
You should install the linear rails mod for the z
@theglowcloud2215 Жыл бұрын
So is there a way to implement belt tensioners and get rid of the zip-tie solution altogether?
@wk5199 Жыл бұрын
There are 3d files out there for x and y belt tensioners.
@ShayDug Жыл бұрын
so does this come with software or do i need my own? really want to get one just let the anxiety get the best of me..........also not wanting to toss around a few hundred bucks around holiday season
@Bastyyyyyy Жыл бұрын
Wym by own software? Use Cura or Prusa slicer for your G-codes. they worked just fine.
@ShayDug Жыл бұрын
@@Bastyyyyyy yeah i am, now i have a printer. just ordered kingroon kp3s and came within a few days. but anyway i guess i was talking more about a CAD software, been printing free test pieces and what not, just wanted some good CAD software to start designing my own work. I have blender, FreeCAD. Guess these will have to do
@PanlasangMotour Жыл бұрын
Can i ask what should i choose Ender 3 or this 3d printer :/
@brentvecchi4893 Жыл бұрын
Where did you source the stronger 180x180 magnet? Need one for a K3 build.
@connorcleveland9166 Жыл бұрын
I buy Graviflex for all my voron builds and highly recommend, on smaller printers like my v0 it might even be a bit too strong sometimes. Fabreeko has 177mm sheets for $12.99
@jamesdmc2928 Жыл бұрын
So. Where did you find the tablets?
@kol101101 Жыл бұрын
I feel like every time someone tries to sell me on Klipper Im just like " I can do that in Marlin too". They even have experimental input shaping though I dont much care for that feature
@ModBotArmy Жыл бұрын
If you don’t care about speed (without much quality loss) then there is really not much need. Granted there are other benefits like not needing to compile each time you make a change but yeah Klipper isn’t something everyone will want.
@josephmama9657 Жыл бұрын
I saw something, I think from Kingroon…about adding a laser!? For engraving? I was like…uh…sold! Anyone use the laser?
@shadyb Жыл бұрын
Titan is not direct DRIVE extruder, it is geared direct extruder. Direct drive means torque transmitted directly from motor shaft without any gearing.