Is the Kubota L3902 Worth It? | Honest Review

[@markcole6475]

I bought the same tractor a little over a year ago…..I like the size and perfect for what I do. I use to have a L2501 and it worked as it should have but ended up not being enough for my needs…. The only thing I don’t like about this size tractor is the lift capacity…maybe 1000# before the hydraulics stall or quit lifting.. I made a huge improvement by adding shims to the hydraulic regulator valve…..I can now lift about 1400# Actually checking hydraulic pressure before and after was a major difference…stock pressure was below spec and now it’s at the upper end of spec..

[@Stumpman61]

I like your weight setup 👍🏻great video

[@nondemify]

The thing on the exhaust tip is to cool the exhaust and protect from burns when in regen mode. You'll notice the tractors that don't have Diesel Particulate Filter (

[@GarmingGFB]

nice and it reduces staining.

[@666bruv]

The fel is not skid steer quick attach, or third function valve assembly

[@greglewis8752]

As far as 'hopping' when you get on, I discovered that if I step up with my right foot on the step, then my left foot is on the platform and easier to turn/sit down.

[@GarmingGFB]

solid idea. i wear size 14 boots. it's a little rough no matter how. thankfully i'm not old enough to have it be a real issue.

[@666bruv]

Is it worth the $10k more than the equivalant kioti?

[@lailer1975]

Sweet rig. That and the BX should cover most anyone’s needs.

[@GarmingGFB]

Thanks, my thoughts too, especially with a nice selection for the quick attach. Now if only I had a big ole excavator lol!

[@davidbennett620]

No its not worth it. Tractor is light and will easily tip over. Too narrow even on flat ground. Accessories are so over-priced. I should have bought a used tractor with loader.

[@GarmingGFB]

everything is "overpriced" blame the government. almost every tractor is tippy with no counter weights. most tractors are too narrow and people add spacers. used tractors still cost a ton unless they're old and broken with tons of hours.

[@arthurmanderson4892]

This tractor is ABSOLUTELY worth it, and a great piece of equipment to work with.