Is there a good hard body for a Vanquish VS410 Pro?

ShrinkRC makes body mounts for hardbody RC trucks.
Body Mounts: shrinkrc.com/c...
Accessories: shrinkrc.com/c...
Affiliate links:
Vanquish VS4-10 Fordyce Straight Axle RTR (Grey): alnk.to/fHl5emo
Vanquish VS4-10 Fordyce Straight Axle RTR (Blue): alnk.to/aeXAP7Z
Vanquish Method 101 V2 1.9" Beadlock Wheels: alnk.to/dLgKru1
RC4WD Mickey Thompson Baja Claw 4.19 Tires: alnk.to/2jLuH1r
ProTek 370TBL High Torque Servo: alnk.to/4MA6qjF
Castle Mamba X Brushless Combo w/ "Slate" 1900kV: alnk.to/apSlOsj
Traxxas 5525 Long rod ends: alnk.to/aWCCLdL

[@RC-ll1rt]

Just got my Vs410 mounts ordered , so glad I don't have to Velcro / Magnet mount my Four door Tf2 body , Shrink Rc Rocks !

[@shrinkrc]

Thank you!

[@AllThingsOffroad69]

That thing is sick! What brand is that little screw driver your using?

[@shrinkrc]

It’s a Bressanon 4V they are on Amazon for about $35🙌

[@AllThingsOffroad69]

Sweet thanks!

[@eventhor1z0n]

I'm day-dreaming, this is awesome. That body would also fit on the VS-410 Phoenix right?

[@johngisbourne7197]

Yes, they sell a Phoenix mount kit for that 4door Mojave.

[@shrinkrc]

Yes our VS410 mounts work on Phoenix, and Fordyce and the Pro and the Ultra.

[@jadelinnfernandez8624]

Wasssup braddah.. I have a question.. I have a vanquish Phoenix RTR and want to mount a 4 door Mojave Hardbody.. I want to keep the dig and od so my question is can I mount just the body (no interior) with your mounts keeping the OD and Dig? Ohh and also have Rock Pirates shock towers if that will have any problems?.. mahalo (thank you) 🤙🏽

[@shrinkrc]

Hello brother. You can keep dig and overdrive with our Mojave 4 door mounts. You will need to do some trimming to the plate that holds the OD servo, to fit with the body mounts. You might also need to do some trimming on the body or the interior to clear the servos. I sugget low profile servos or micro servos. The floor of the Mojave 4 door is pretty high so it wont be that bad. All of our Vanquish body mounts work with dig. Also, all of our Vanquish body mounts work with OD, except Mojave 2 door and F350. The RP shock towers wont be a problem.

[@shrinkrc]

If you arent running an interior then it is even easier, you will still have to trim the plate that holds the OD servo, and you will still have to trim the bed for the dig servo. Maybe not with a micro servo. Hopefully I answered your questions. Write to me if not.

[@jadelinnfernandez8624]

@@shrinkrc ordered my mounts today thru eBay headed to Hawaii.. I gonna put the Mojave 2 body on a Fordyce ( no need to mess with servo’s)..next will be metal f10 housings.. glad I have an understanding wife..lol

[@shrinkrc]

@@jadelinnfernandez8624 an understanding wife makes it a lot easier! Pro tip: get her a rig that can outperform yours and you'll get her into the hobby too haha

[@Cranklotus]

Im wanting to put a Hilux or 2 door Mojave cab, or extra cab (whatever is cheapest and I can find) on a VS410 fordyce.

[@shrinkrc]

I would suggest the Mojave 2 door in that case. You'll need to shorten your rear links, there's more info in the details here: shrinkrc.com/products/shrinkrc-body-mounts-for-rc4wd-mojave-ii-two-door

[@calvinjacobpaguirigan8039]

What kind of rear links did you use to extend the rear to properly fit the 4door body ?

[@shrinkrc]

Stock links, you just need longer rod ends on one end, all four links. Use these, and you might need to trim them a little: www.avantlink.com/click.php?tool_type=cl&merchant_id=4b85b2b7-558e-4304-89fc-54958c8f47f0&website_id=e47f8f9d-e7c7-4905-bf2e-7001163325f5&url=https%3A%2F%2Fwww.amainhobbies.com%2Ftraxxas-rod-ends-w-hollow-balls-12-tra5525%2Fp19147

[@axellness]

where did you get the body for the truck on the right?

[@shrinkrc]

All these bodies in the video are made by RC4WD. The blue one on the right is a 4runner without the topper on it. You can get it here when it comes back in stock: alnk.to/g38dmIO

[@Dr.Feelgood]

how did you get the weathering effect on the paint? Did you base coat the truck in black and allow the blue to naturally wear off?

[@shrinkrc]

The blue paint is directly on the gray plastic, I didn't even primer it. After that I took the truck out and drove it. Every time I got home I touched up all the scratches with a brown sharpie. That's it! I do this with a lot of my trucks.

[@IanG1978]

I saw above that you used some 6mm standoffs for the battery tray, did you also trim it to bring it lower to the chassis rails?

[@shrinkrc]

I used the tray that is normally attached to the side plate, not the big tray. Send me an email if you need a picture for ref. [e-mail]

[@rccrawlingaddict207]

I said it before but those Toyota's are such a nice body for crawlers. Did you lower the battery tray also, in the pro? Thanks for sharing.

[@shrinkrc]

I put the tray on some short standoffs, probably 6mm.👍

[@donellison4452]

What’s the outer diameter of the tire you’re using

[@shrinkrc]

These are 4.19 MTR’s🤙

[@richardfleming9243]

What size tires can you run on this crawler? Look sick.

[@shrinkrc]

This is on 4.19s with a little trimming. You can go bigger but get ready to cut😂

[@richardfleming9243]

Dont the rear vp pro rear bumpers wider then that body?

[@shrinkrc]

@@richardfleming9243 Yes! I cut a little off the ends!