Is this 1-Piece Carbon Bar and Stem a GAME-CHANGER? | Taking on Name Brands!

  Рет қаралды 100,413

GC Performance

GC Performance

Күн бұрын

Пікірлер: 346
@GCPerformance18
@GCPerformance18 Жыл бұрын
I am leaning towards the bar which I am going to put on my bike first, which one would you choose, if you had to choose 1 between the three?
@eto2352
@eto2352 Жыл бұрын
EXS by far the best looking. >F1S (without fat spacer)>Roval
@nationsnumber1chump
@nationsnumber1chump Жыл бұрын
fart sports
@nationsnumber1chump
@nationsnumber1chump Жыл бұрын
should have gone with 3T aerofux like me
@BikesKomsCRO
@BikesKomsCRO Жыл бұрын
The company you want to lick the buttcheeks off and possibly make more money from in the future pal, that’s how your moral compass works…
@DeveryAndrews
@DeveryAndrews Жыл бұрын
EXS FTW!
@peterhoelzel2448
@peterhoelzel2448 Жыл бұрын
EXS, no doubt the best looking one. Short reach though. Would've loved to see it with the outfront mount. Thanks for showing
@8rk
@8rk Жыл бұрын
EXS has a traditional bend bar version of the AEROVER which is longer reach. Absolutely the best looking 1 piece bar out there.
@MichaelE89
@MichaelE89 Жыл бұрын
The EXS looks really good, but I am very happy with the roval bar. Just the GPS mount angled down was a pain (for me). Therefor I designed a carbon 3°up angled one.
@syedtahaaljunied1900
@syedtahaaljunied1900 Жыл бұрын
Selling?
@MichaelE89
@MichaelE89 Жыл бұрын
@@syedtahaaljunied1900 I'm not sure, for now it is not planned to sell them
@ryandennison7519
@ryandennison7519 8 ай бұрын
I would be open to buying if you change your mind! @@MichaelE89
@tgfysiyf
@tgfysiyf Жыл бұрын
I’m running an AliExpress 1 piece aero bar on my bike and love it! 2k miles, 0 issues. And only $85!!!!!! I ordered a 36x110 and it’s beautiful
@eto2352
@eto2352 Жыл бұрын
I would never gamble my face and teeth on that.
@thelukemark1
@thelukemark1 Жыл бұрын
You should compare these to the Elves one piece bar/stem combo and other cheaper options! Great review/comparison
@dietcokeheadd
@dietcokeheadd Жыл бұрын
Been riding with a FarSports FS1 all season and it's been great. Chose it because it works with my Giant TCR, and the fact it came with a Garmin mount. Nice see that others like EXS following suit with free proprietary out front mounts. Bit ridic dropping big loot on a fancy bar like ENVE SES Aerobar and then paying extra for a computer mount.
@matthewblue7839
@matthewblue7839 10 ай бұрын
$450 usd: ridiculous.
@stuartdryer1352
@stuartdryer1352 Жыл бұрын
My integrated bar came included with my Yoeleo R12 and I could choose width and stem length. (Frame, bar, seatpost, fork for $1500). But on my other bike these other bars are really interesting. But $400 still painful.
@chasepalpatine170
@chasepalpatine170 Жыл бұрын
Was waiting on Roval, but I may go with the EXS. Looks superb.
@JH_Cycles
@JH_Cycles Жыл бұрын
I have the EXS on my Colnago V4RS - there’s a review on my channel - helped keep it under 7kg - very stiff, very well made and a good price IMO
@jiahuacai8278
@jiahuacai8278 Жыл бұрын
just to note that EXS don’t recommend use mechanical groupset but farsports can…
@10ktube
@10ktube Жыл бұрын
I'm starting to think that people are "dealing with" bad fits now on a bike because it's such a pain in the butt to do anything adjustment wise. Reach issue? People slide the saddle forward. Too low? Tilt the saddle down and hope for the best. It's ridiculous.
@wss327
@wss327 6 ай бұрын
Started with a Roval Alpinist and as my riding style changed, I went with an Enve Aero bar, love the flared drops and then lengthened the stem after a proper bike fit. Two piece keeps my options open.
@TheBassallyear100
@TheBassallyear100 Жыл бұрын
EXS for sure. it's a killer looking bar.
@Bikes-guitars
@Bikes-guitars 4 ай бұрын
Thanks for this, I have just ordered one of the EXS Bars for my gen 6 Trek Madone, this bar solves a big problem I have with the Madone, which is the crazy long reach on Trek bars, fir some reason Trek think the bar reach should be 93mm 🤷‍♂️ I guess that’s fine if you fit a shorter stem, but when I’m already on a 9cm stem which is the shortest Trek make for the Madone then it becomes a problem, I was actually going to sell the bike because I can’t get the fit the same as my Aethos 🙄, I think the EXS bar looks great too, really looking forward to receiving it now 👍
@benhardwick1970
@benhardwick1970 Жыл бұрын
I’ve got the farsports bar. 38cm 90mm. Really happy with it and honestly I can’t see any difference between this one and the vision 5D metron bar (was too big for me). I have it on my TCR
@mowgliepfeiffer8993
@mowgliepfeiffer8993 8 ай бұрын
@GC Performance, I ordered the EXS after watching your video and the Roval as well and received both this week. I will be installing the EXS on my S-Works SL8 Legion Racing team frame. The Roval is nice as well but I will return it for a full refund. To munch money to keep laying around. EXS is just plain sexy and the finish is awesome. The included steer tube shim is indeed a very tied fit as you mentioned in your video. Any recommendations how to make the install any less painful? I was wondering to spray it with an alcohol water solution for a little bit added slip. Thanks for your videos I always enjoy them. Cheers
@GCPerformance18
@GCPerformance18 8 ай бұрын
Yes carbon grip paste. Makes it easier
@Clashing0N
@Clashing0N Ай бұрын
I like the look of the EXS handlebar the most but can’t seem to find any available other than on Aliexpress. Do you know if the ones on Aliexpress (€600) are legit or is that a knock-off version? Thanks!
@GCPerformance18
@GCPerformance18 29 күн бұрын
Yea send me an email. I have one in stock 36/110 ready to ship for $500 gcperformanceyt@gmail.com
@bigwave_dave8468
@bigwave_dave8468 Жыл бұрын
I prefer the smoother, less boxy look of Roval. Value for money for either seems pretty equivalent to your Roval sample if you factor in the lifetime policy and warranty (not a big deal for a $6K-$8K bike). As for weight..that doesn't matter if the thing is not strong - I would want to see what the CF repair guy says about the internal construction.
@carltonholmes8061
@carltonholmes8061 Жыл бұрын
Yes, that’s one of the reasons why the bike industry is all f*** up. It’s getting really stupid with all these ridiculous prices. What planet are they on? 🤔
@hankschrader2353
@hankschrader2353 Жыл бұрын
Im a fan of farsports so far, but did you know specialized and the other employ people in western countries with western pay and advertise in these countries and worldwide ? Just because both items are manufactured in Asia and made from carbon doesn’t mean they should cost the same ….
@gourami7
@gourami7 Жыл бұрын
Planet profit
@LOGICAL-JAY
@LOGICAL-JAY Жыл бұрын
​@@gourami7yep...lol..😅
@NoahStephens
@NoahStephens Жыл бұрын
Just because you can’t afford something doesn’t mean it’s too expensive. There are $50 alloy bars. Get one of those if this chafes your chaps
@Penalist
@Penalist Жыл бұрын
Planet capitalism, and it works for them.
@razorree
@razorree Ай бұрын
is it very stiff ? or more on comfortable side ? how are they? (comparing to Roval?)
@davelee71
@davelee71 11 ай бұрын
EXS all day long suits the frame best by far!!!
@GCPerformance18
@GCPerformance18 11 ай бұрын
I agree it’s such a. Hot bar
@foresure7181
@foresure7181 Жыл бұрын
noob here.... assuming an EXS can work on a sprint allez comp for intg cables too?
@jvogel431
@jvogel431 Жыл бұрын
I would love to upgrade to the 1 piece cockpit for my Sl7, but it was such a nightmare installing the Roval Rapide bar and stem with all of the internal cables that I just can't muster the strength to go through it all over again.
@ioanmcmlxxxviii
@ioanmcmlxxxviii 14 күн бұрын
That's why we have bike shops, let them deal with it and pay their work exactly how others pay your work.😅
@brett_frondorf
@brett_frondorf 9 ай бұрын
I bought the Tarmac Bora frame and building my own bike. It looks like the last thing I will be waiting on to complete the build is for the correct size Roval handlebar to come in stock 😅
@GCPerformance18
@GCPerformance18 9 ай бұрын
yea those are gonna be tough, what size bar do you need I have some in stock, send me an email gcperformanceyt@gmail.com and I am super jealy of that bora frame it is so nice, congrats on the frame
@jackriley1989
@jackriley1989 Жыл бұрын
Any discount code for the EXS? I've been looking at one very closely
@reddawn87
@reddawn87 Жыл бұрын
OOOhhh yassss the EXS-iest bars ever man. Fell in love with the Aerover the moment I laid eyes on them. Do you foresee any issues with the rather narrow top bend into the drops though? Not sure if they would be more ergonomic or increase palm pressure. This is my only concern with them.
@donwinston
@donwinston Жыл бұрын
I need a 130mm stem. Pain in the butt finding one at a reasonable price. Looking at not all in one Deda Superbox DCR stem and Easton handle bar. Electronic shifting makes it much easier to find something that is sure to work.
@coco1252
@coco1252 6 ай бұрын
The steerer sleeve is for bikes like specialized that have a smaller sterer. On a canyon it goes without it. 1 1/8 vs 1 1/4 steere size
@GCPerformance18
@GCPerformance18 6 ай бұрын
they make it for it
@sapiens7821
@sapiens7821 Жыл бұрын
Love the EXS bar looks solid and slick. The top grips remind of the RR Co Efficient Bars.
@GCPerformance18
@GCPerformance18 Жыл бұрын
Agreed!
@DAWMiller
@DAWMiller Жыл бұрын
I'd be curious to see you check out the Yoeleo H9 handlebar. A lower price point than both these bars but I have not yet found any poor quality issues with it.
@GCPerformance18
@GCPerformance18 Жыл бұрын
I rode it on my yoeleo gravel bike I liked it alot, it did everything right just a little too generic looking to be honest, but I liked the flared dropouts
@bourquek
@bourquek 10 ай бұрын
It would be really nice if Far Sports also made a top cap for Allez Sprint for use with their F1 bar like they do for the SL7.
@MS-bw7yt
@MS-bw7yt Жыл бұрын
Gain 5 watts with better integration. Lose 20 watts in bike fit and comfort. Or pay 800 bucks for a new cockpit... new reality with pre built bikes
@timdixo
@timdixo Жыл бұрын
So very true. Facts that are glossed over by the industry shills whilst mug punters are lapping this insane fad up.
@bernardo9202
@bernardo9202 Жыл бұрын
EXS website says it is compatible with the new Venge. Is that a dig at SL8 or is a new venge coming out this year?
@cyclistshub
@cyclistshub Жыл бұрын
When I was holding F1 in my hand at Eurobike, I was very impressed. Beautiful handlebar, super light yet stiff. 👍
@dhalbrook
@dhalbrook Жыл бұрын
I chose to go with the Roval bar for the SL8 I'm building up. Yes, it's more money, but IMO the extra $150-$200 is worth it for two reasons. First, the aerodynamics of the SL8 were designed with that bar in mind. Second, the warranty and crash replacement policy on something as crucial and exposed as a handlebar is a big deal. The EXS looks like the best alternative, though. More competition is a good thing. FWIW, it's a shame you didn't weigh the EXS with both the steerer shim and the out front mount, or the Farsports with the steerer shim. That would be way more accurate when comparing the three.
@Jarek.
@Jarek. Жыл бұрын
EXS Aerover is awesome. Pity it's Out of stock as for now 🥹 #Question - do you see an option to put a few carbon spacers under EXS' top cup in case the fork tube is too long? Just give some time for finding optional position before cutting it?
@aaronpaterson7582
@aaronpaterson7582 Жыл бұрын
I love videos like this. The bars all look great I wish they had it when the VIAS was out.
@GCPerformance18
@GCPerformance18 Жыл бұрын
Thanks so much!!! I love doing videos like this too lol
@rafaelsoldatti
@rafaelsoldatti 11 ай бұрын
One question: Does the upper bearing cover that comes with the EXS model fit perfectly on the SL8 frame? Thanks for the review!
@GCPerformance18
@GCPerformance18 11 ай бұрын
No you need to Order the spacer and tell them what bike you have. But they can be made to order off it
@coolguy123163
@coolguy123163 7 ай бұрын
Do you think the AXS would make 3d printer spacers for tarmac SL6? (it would ve just for the looks since as you may know sl6 doesnt have fully internal cable ruting, it would just look weird with round original spacers And the shape of the stem)
@GCPerformance18
@GCPerformance18 7 ай бұрын
I think they make a fork for it to make it internal, hit them up
@reynicanor9908
@reynicanor9908 Жыл бұрын
Good review GC Performance thanks for sharing…I already have the Farsports on my 2019 Giant TCR advance pro and I like it but I’m liking the EXS handlebars better. I just bought the 2024 Giant Defy frame set which have the D shape steer tube do you think the EXS handlebars will work?
@danaponik5276
@danaponik5276 Жыл бұрын
Yeah, me too..asking for a friend.
@happydays8171
@happydays8171 11 ай бұрын
I don't know. What if the Roval does save 4 watts over the competition? If it goes down, probably not break. That's why I put it on my SL-8.
@GCPerformance18
@GCPerformance18 11 ай бұрын
they have simnilar aero claims on there website from wind tunnel tests
@happydays8171
@happydays8171 11 ай бұрын
@@GCPerformance18 While I was looking for my Roval bar, there were a lot of places with the Atheos one piece bar for around $450.
@aRlyWeakCyclist
@aRlyWeakCyclist Жыл бұрын
I went from a 100mm stem canyon cp to an 80mm farsports f1 in search of shortening my bike's reach and it ended up being a wash because the area where the shifter clamps is safe to put is lower and forward on the F1 and on the canyon i was able to shove then further up and back. That should be a consideration for anyone trying to do the same.
@kubackjeee
@kubackjeee Жыл бұрын
If u use 80mm stem your bike is to big for you
@aRlyWeakCyclist
@aRlyWeakCyclist Жыл бұрын
@@kubackjeee incorrect, im not too flexible and have a shorter torso but i still like the look of an aero bike that's why to maximize my fit i had to get an 80mm stem. If i went down a size in bike the stack would be over 25mm shorter and that would hurt my lower back even more.
@kubackjeee
@kubackjeee Жыл бұрын
@@aRlyWeakCyclist then it's a wrong bike for you.
@aRlyWeakCyclist
@aRlyWeakCyclist Жыл бұрын
@@kubackjeee naw, you're just generalizing.
@poudreuse8391
@poudreuse8391 Жыл бұрын
How about the Avian Canary intergrated handlebar/stem as seen on CC Joe’s website. Only $269 for 240 grams!
@kimwarner6050
@kimwarner6050 Жыл бұрын
Yea, I'm very tempted
@Gianniz27
@Gianniz27 Жыл бұрын
Too flexy.
@foreverjz9284
@foreverjz9284 Жыл бұрын
This reminds me of the S-works sl8 with ultegra di2 and crw wheels build that you covered before. These handlebars on top of that is an absolute killer!
@Tarmaccyclocross
@Tarmaccyclocross 4 ай бұрын
Cr@p bars on a heavy cr@p bike
@PauloSerra
@PauloSerra Жыл бұрын
Nice comparison and heads up on the head tube length. Seems like the tube is a bit too low on your setup with the spacer, was that just for demonstration purposes, or do you thinks that's enough tube length ? I am still using the 5mm spacer on top of the stem, and headtube all the way up, has that changed with these integrated bars ? It does look better, but is it safe enough ? thanks !
@GCPerformance18
@GCPerformance18 Жыл бұрын
yea this was just for demonstration it s not going on that bike, but it would need to be under that spacer
@johncoates6039
@johncoates6039 2 ай бұрын
I’ve used FSA handlebars with the 4dg of flare and I find them to tilt the tops of the hoods inwards casing my wrists to be very uncomfortable….but the. I’ve ridin a bontrager xxx 1pc and found that the hoods do not tilt inwards. That bar also has the same 4dgs of flare. When I say tilt I’m saying the flat top of the hood moves from a level surface to an off kilter position if that makes sense? Can you tell me if the exs bar is like the fsa or bontrager??
@GCPerformance18
@GCPerformance18 2 ай бұрын
its hard to say, it has minimal, tilt for me, I cant gauge it compared ot how your saying it because we al gauge things differently, but it does have slight flare
@BrandonAquino-mu5fl
@BrandonAquino-mu5fl 10 ай бұрын
Another great video @gc performance! I'm leaning towards the EXS as it looks badass on the SL8 but how aesthetically pleasing would it look on a 2021 Scott Addict RC Pro? Does anyone here have seen the bar on a Scott? The stock Syncros Creston iC SL bar just isn't doing it for me... Many thanks!
@GCPerformance18
@GCPerformance18 10 ай бұрын
thanks so much, I ahve not seen it personally, but htye have pictures on there instagram account, but they do make it for it
@Speedy.V
@Speedy.V Жыл бұрын
Why not buy an Extralight HyperStem and bars that have a center hole to route the cables inside the stem. One of the hyper stems is only 69g
@kimwarner6050
@kimwarner6050 Жыл бұрын
Just went to the site. The cost would be a wash once you add the bars. Plus it wouldn't look clean. Personally specialized makes the best stem for a clean cockpit, but it's heavy
@Gianniz27
@Gianniz27 Жыл бұрын
Looks.
@Ih8GoogleandApple
@Ih8GoogleandApple Жыл бұрын
1000$ for a bar/stem? I bought a good second hand bike for less than that!
@nationsnumber1chump
@nationsnumber1chump Жыл бұрын
Every video I just count how many cruiser baskets he has in the background. it keeps growing
@kakajangra
@kakajangra 4 ай бұрын
Bro, I am dialed in on my 2021 SW Venge with 420mm roval aerofly II with 6deg stem . I want to switch to 380/400 mm farsports EXS bar, what stem size would you recommend, given the far sports ( or exs) bar has 10deg angle. I dont know how much difference will that make. is your GC10 code still valid? Thanks a lot!
@GCPerformance18
@GCPerformance18 4 ай бұрын
The angle is not that big of a deal it’s 4 degrees. Your body will get used to it and acclimate to it
@geko7843
@geko7843 Жыл бұрын
Can you try to install the EXS on a Standard bike Like Tarmac SL6
@geko7843
@geko7843 Жыл бұрын
Or the Venge!
@teunluijbregts2533
@teunluijbregts2533 Жыл бұрын
No offence but I’m still wondering how these €400 handlebar combos could ever compete with a €85 Deda stem and €100 compact handlebar conbo.
@SamuelBlackMetalRider
@SamuelBlackMetalRider Жыл бұрын
They compete in terms of: 1. Looks 2. Weight 3. Aero gains That’s a lot
@scottelectronic
@scottelectronic 11 ай бұрын
I guess in the sense that they’re better in every way except price.
@bamicus9342
@bamicus9342 4 ай бұрын
Anyone know anything about restock issues with exs? They seem to have big problems keeping supply. Farsport doesn’t have this problem.
@GCPerformance18
@GCPerformance18 4 ай бұрын
yea I do not know why they are very slow to restock
@Garfie1d73
@Garfie1d73 Жыл бұрын
That fork shaft has been cut too short for the EXS. There is literally only 1 screw holding the construction together. You skipped that part of the assembly (purposely?). That's just dangerous as hell! 😬
@yankit26
@yankit26 7 ай бұрын
do you know if you need there fitting or you can fit it with existing spacer?
@GCPerformance18
@GCPerformance18 7 ай бұрын
no you need there spacers but they come with bar whne you order them
@vietnguyen4312
@vietnguyen4312 Жыл бұрын
I have just ordered the Avian Canary Integrated Handlebar from pandapodium. made from graphene and T800 carbon weighing in at 240 grams . They claim to be extremely stiff and robust. Hopeful they are good.
@PedaleurPat
@PedaleurPat Жыл бұрын
Nope, they state that it is NOT that stiff because of the weight savings
@Junnys_Bicycle_Hoard
@Junnys_Bicycle_Hoard Жыл бұрын
That EXS looks sweet 👍
@bebopman5
@bebopman5 Жыл бұрын
Out of the 3, I’d got with the Roval cockpit, since it’s the only one to offer a 44cm bar. But honestly, I’d still be with my Vision 5D Metron bar, or 5D ACR one. They’re 44cm are 43cm at the tops, which fit me like a glove.
@geko7843
@geko7843 Жыл бұрын
The exs is42 on top and 44 on the drops
@alexbianchi685
@alexbianchi685 Жыл бұрын
You can review the Progress pg 243 integrated handlebar. 12k carbon and 320 gr for 390€. Progress is a spanish brand with good products
@Jarek.
@Jarek. Жыл бұрын
7:18 F1s spacer for SL7 costs 45 USD on their page 🤣
@DonJon99
@DonJon99 Жыл бұрын
I spotted an other 1 piece carbon bar on the same site of the EXS, and in my opinion it looks better and little cheaper than EXS. (it is called Avian Canary Handlebar)
@kailiang9562
@kailiang9562 4 ай бұрын
How did you manage to run front brake wire on tarmac sl7 headset?
@TheLimeCurd
@TheLimeCurd Жыл бұрын
I decided not to upgrade my SL7 S-Works handlebar to this because 1. Cycle computer's viewing angle is too flat ... and 2. It's a bit annoying to take off the entire handlebar (instead of unscrew and turn) to fit your bicycle in a hardshell case when traveling.
@TBarsss
@TBarsss Жыл бұрын
You can get a magcad mount that sets the computer at a normal angle
@TheLimeCurd
@TheLimeCurd Жыл бұрын
@@TBarsss ah cheers mate! I will look it up!
@Jarek.
@Jarek. Жыл бұрын
Fair points... Plus carbon bars are more prone for damage in case of crash. But hey, this is our hobby and we need something to spend our money at 🤣 Having said that - this EXS is looking sick.
@geko7843
@geko7843 Жыл бұрын
EXS Looks amazing!❤
@larrytanzo4761
@larrytanzo4761 Жыл бұрын
EXS looks the best! Thanks for the great review😍
@GCPerformance18
@GCPerformance18 Жыл бұрын
thanks so much
@yizhouwang9226
@yizhouwang9226 Жыл бұрын
Incredible product! Personally used, super light and stiff. And it has a wide range of spacer and cap adapter for different frames that fits the bar perfectly.
@GCPerformance18
@GCPerformance18 Жыл бұрын
very nice
@elialexander-tanner5784
@elialexander-tanner5784 Жыл бұрын
Thanks for this. These are awesome but I'm hooked on flared handlebars so I'm looking at Black Inc's integrated bars and waiting for the one from ENVE to come out.
@GCPerformance18
@GCPerformance18 Жыл бұрын
very nice, I wonder why enve bars are taking so long to come out so many people are waiting for those lol
@chasepalpatine170
@chasepalpatine170 Жыл бұрын
EXS looks awesome
@logojones96
@logojones96 Жыл бұрын
new avian canary looks amazing as far as price/weight goes as well
@rocstar76
@rocstar76 Жыл бұрын
I'm about to take my Avian Canary off and install the EXS bar. Canary is a bit too flexy for my liking, but really good for a light weight build
@logojones96
@logojones96 Жыл бұрын
yea def seems to lean more towards lightweight than aero/stiff@@rocstar76
@robertofloresandrade1597
@robertofloresandrade1597 Жыл бұрын
The EXS reminds the ICS2 from BMC, looks brutal with that one!!
@johncoates6039
@johncoates6039 2 ай бұрын
Can mechanical shifting and brake housing fit in the exs bar? For rim brakes🤔
@GCPerformance18
@GCPerformance18 2 ай бұрын
If the bike is integrated and internal yes there is enough room for all the cables. It will just be a pain in the ass
@lee1210mk2
@lee1210mk2 Жыл бұрын
Lifetime warranty and crash replacement program for the win!
@bmwflyfisher
@bmwflyfisher Жыл бұрын
Girth, length and width…Coffee shot out nose! I love the EXS look - googling now! It’s amazing that both the aftermarket seem to fit more like a glove than the Roval. Should Specialized take notes? I think so.
@GCPerformance18
@GCPerformance18 Жыл бұрын
Haha thank you, didn’t know if the joke would hit. But yea I like the stem fits the look of the speed sniffer well
@bry-dav
@bry-dav Жыл бұрын
Start the design with disc rotors and work backwards to the frame. I like your style!
@rd2783
@rd2783 Жыл бұрын
-10 is a deal breaker
@lemonshire1
@lemonshire1 Жыл бұрын
EXS has been getting kind of popular recently, went from no videos to several in a few weeks
@jimbo4203
@jimbo4203 Жыл бұрын
While they do look cool , they are a deal killer for me , I'll stick with my emonda alr5 , light and simple 😊
@mrrodriguezHLP
@mrrodriguezHLP 11 ай бұрын
The Farsports has an OD2 option!!! The biggest pain in the butt of owning a Giant is that no one makes stems or integrated bars in Giant's proprietary steerer size of 1-1/4''. The whole of the civilized world uses 1-1/8 and I'm over here begging for affordable OEM on ebay.
@Mas421
@Mas421 Жыл бұрын
Oh, a game-changer! Can t wait to see how the game changes.
@GCPerformance18
@GCPerformance18 Жыл бұрын
you get a new game and then it changes, then changes again
@nemixCOD
@nemixCOD Жыл бұрын
do these work with the likes of a trek domane al2 disc, which uses a 31.8mm clamp stem default, which has a steerer internal diameter of 28.6?
@kimwarner6050
@kimwarner6050 Жыл бұрын
Yes
@PatrickLino
@PatrickLino Жыл бұрын
Yo is that SL8 color available in a frameset-only option?
@junksmiles
@junksmiles Жыл бұрын
It’s the Pro AXS build. Raw carbon just like the SL7 frameset.
@PatrickLino
@PatrickLino Жыл бұрын
@@junksmiles The question is that available in a frameset-only option?
@junksmiles
@junksmiles Жыл бұрын
If you’re on good terms with your local shop maybe. Should be the lightest Pro frame.
@PatrickLino
@PatrickLino Жыл бұрын
@@junksmiles thanks g!
@guesser84
@guesser84 Жыл бұрын
Does the EXS bars come w those rubber stoppers for holes at bottom of the bar?
@GCPerformance18
@GCPerformance18 Жыл бұрын
It does not. But maybe ask them when buying they might have some to sell
@mowgliepfeiffer8993
@mowgliepfeiffer8993 8 ай бұрын
I just received my EXS and it came with the rubber stoppers.
@DanceTurbo
@DanceTurbo Жыл бұрын
EXS, but bar stiffness is also so critical! It would be great if Peak Torque could do some 3rd party comparisons. @gc performance maybe a collaboration?
@Dee-Ell
@Dee-Ell Жыл бұрын
Why is one-piece bar's stiffness critical? Since when?
@tombola4046
@tombola4046 Жыл бұрын
All the “Rage” not “Rave” 😂 but who doesn’t love a Rave
@lidakang
@lidakang Жыл бұрын
That's what every bike shop should do to save the industry - providing professional services such as mixing components and offering best value to customer. Big companies like Trek and Shimano design incompatible components purposely for their own profit. They need to learn the lesson.
@Chimy1423
@Chimy1423 Жыл бұрын
Great looking handlebars. Have you heard handlebars from Yoeleo?
@calokie5567
@calokie5567 4 ай бұрын
Do you know if the Winspace Zero bar has an SL8 adapter
@GCPerformance18
@GCPerformance18 4 ай бұрын
it does not but one can be from 3d printing
@MrJhockley
@MrJhockley Жыл бұрын
Not really. At £400 i can get a whole new bike. It's a game changer when it's priced for the masses.
@byronhimes396
@byronhimes396 11 ай бұрын
Where did you get the exs bars? They only have like 3 sizes in stock.
@GCPerformance18
@GCPerformance18 10 ай бұрын
go to exs website if not then message them oin instagram or send them an email on there website you might have to custom make it
@Raven5763
@Raven5763 11 ай бұрын
I read a story a couple of years ago that Specialized diverted supplies to other countries because the US importing process is so slow. I wonder if it is still going on.
@GCPerformance18
@GCPerformance18 10 ай бұрын
who knows I dont know how much that is going on after covid
@andipiper9289
@andipiper9289 11 ай бұрын
Thanks 🙏🏼
@richardgriffin6156
@richardgriffin6156 Жыл бұрын
GC, looking to integrated on my soloist, which do u think will work?
@GCPerformance18
@GCPerformance18 Жыл бұрын
Both will work with them. There website gives all there compatible options
@gavinatkins3371
@gavinatkins3371 11 ай бұрын
Do any of these bars have safety testing certification? Surely that would be a selling point
@GCPerformance18
@GCPerformance18 11 ай бұрын
yes they are all passed through qc by companies that have been in business for a long time
@geko7843
@geko7843 Жыл бұрын
Wanna See a full build with Di2 and exs
@kubackjeee
@kubackjeee Жыл бұрын
EXS looks waay better and the oversized stem hides this ugly sniffer a little.
@calokie5567
@calokie5567 3 ай бұрын
Do u know if anyone makes a Winspeed Zero integrated bar adaptor for SL7-SL8 tarmacs?
@bamicus9342
@bamicus9342 3 ай бұрын
Been looking for 2 months, NO stock! Went w/ Farsport, beware, 120mm is really 130. Measurement is way off!
@GCPerformance18
@GCPerformance18 3 ай бұрын
And with exs 120 is really 110 compared to Roval
@noahmills2884
@noahmills2884 11 ай бұрын
GC, do you think the exs will fit on the new defy advanced sl?
@GCPerformance18
@GCPerformance18 11 ай бұрын
I am sure they can make something for it at request. Just message them and ask
@adamlasky4934
@adamlasky4934 Жыл бұрын
Is the farsport or EXS compatible with the previous gen Canyon Ultimate?
@Gianniz27
@Gianniz27 Жыл бұрын
He mentions Giant oversized steerer standard, which is the Canyon standard.
@GCPerformance18
@GCPerformance18 Жыл бұрын
I would not know this would be a question for the company you can reach out through email or instagram
@up3412
@up3412 11 ай бұрын
The trues is EXS is the bar without question
@GCPerformance18
@GCPerformance18 11 ай бұрын
yes same here
Carbon Or Aluminum Handlebars: What Is BEST?
10:22
GCN Tech
Рет қаралды 54 М.
The Best Handlebar I've Ever Seen (Bike Fitter explains...)
6:09
Road Cycling Academy
Рет қаралды 216 М.
MAGIC TIME ​⁠@Whoispelagheya
00:28
MasomkaMagic
Рет қаралды 38 МЛН
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 7 МЛН
😜 #aminkavitaminka #aminokka #аминкавитаминка
00:14
Аминка Витаминка
Рет қаралды 2,6 МЛН
КОГДА К БАТЕ ПРИШЕЛ ДРУГ😂#shorts
00:59
BATEK_OFFICIAL
Рет қаралды 6 МЛН
Specialized Roval CLX Team Edition Unboxing
17:03
The Bicycle Station
Рет қаралды 5 М.
Major Bike Brands Get this Bike Part WRONG!!
50:22
GC Performance
Рет қаралды 40 М.
6 Bike Products That Shouldn't Be Carbon Fibre
9:32
Cade Media
Рет қаралды 441 М.
Is an Aero Bar Actually Faster? Tested. #aerodynamics #cycling
11:39
$30 Carbon Fiber Handlebar?! *Unboxing Weird Bicycle Items from TEMU*
32:45
If I Can Do This Upgrade, So Can You!
12:45
Mitch Boyer
Рет қаралды 95 М.
This is The Cassette You NEED for Your Bike.
24:14
GC Performance
Рет қаралды 79 М.
MAGIC TIME ​⁠@Whoispelagheya
00:28
MasomkaMagic
Рет қаралды 38 МЛН