Is this a perfect marriage or we headed for a divorce?

[@sneezy_wrx]

That is probably the best setup and safest way to secure the bike without putting stress on the bike. I’ve seen people thought they had their bike secure in a truck and it fell over

[@prov431]

tie down from the individual fork tubes (above a collar) is exceedingly better than anything to do with the handlebar - ask a motorcycle suspension pro if need be (computrack, etc) Good set up there!

[@kajagan]

Great set up! I am considering the same set up on my Kendon. I have the dual bike trailer with the center optional mount installed. Got to see if they make the stands for my k1300.

[@-Primer-]

Never used a Canyon Dancer and never will. They are terrible for the throttle and clipons. Your setup is probably the safest / least motorcycle stress you can get.. Add a 2" strap on the front wheel chock and call it done.

[@jedcsh1]

I really want to add this Pitbull mount to my Kendon. I have the exact same kendon. My only concern is....If I want to carry a different motorcycle with the same system, I'm guessing it won't work if the front - to - rear axle length is shorter/longer. Is this correct? I'd hate to think that once the holes are drilled and the plate is bolted in place, it's only compatible with one specifically dimensioned bike.

[@drewhaze13]

Sir, I have the same set - up and am a huge fan. Ride Safe.

[@fastmatt30]

Those rear bolts that are not through the diamond plate(?) floor, how secure are they?

[@rockitdorkadventures6094]

The rear bolts run next to the tube support with 1/4 in flat stock that under the tube support. I used nylon locknuts to secure it

[@nose2wind872]

I'm not too fond of all those ramp sections. I would just use the center one. Your side stand is crushing that thin metal plate. Would have to do something to spread out that load.

[@rockitdorkadventures6094]

The three ramps give stability and weight distribution while riding up on the trailer, it works perfect also gives you confidence in the event you stop on the ramps. As for the side stand there is tubing under the diamond plate that distributes the weight evenly.

[@shannonstevens7091]

Very nice trailer!

[@greekstang50]

Where did you get those straps from and what brand are they they are retractable ratchets right

[@dancingmaryjane]

is it safe to go 70 mph with this trailer on the highway

[@rockitdorkadventures6094]

I do not go any faster than 70 with a trailer

[@MrBiggregg5]

What type of lug nuts do you have on those rims? I am upgrading my wheels on my trailer to the same wheels? Where did you get those restraints from also?

[@rockitdorkadventures6094]

They came with the trailer, I upgraded wheel package. The wheel restraint is from Pitbull

[@ajojoseph6052]

How is the Kendon holding up? Any reliability issues?

[@rockitdorkadventures6094]

No issues and the trailer works perfectly after 5k miles on the it. Just keep the bearing greased every 2k miles.

[@Jknasse2]

How far have you gone with this setup?

[@rockitdorkadventures6094]

I have traveled 100 miles with this setup and no issues

[@spankyvanhorn2141]

Love the video, great idea.

[@rockitdorkadventures6094]

Glad you liked it!

[@tracyratzlaff7421]

What if your motorcycle has saddle bags

[@rockitdorkadventures6094]

Saddle bags do not interfere with the set-up

[@pattyjay9999]

I have a ZX14 but that orange one is🤢🤮

[@rockitdorkadventures6094]

Thanks for the comment, but when I go around you, you don't see the color, just the tire!!