Is This Old Stihl MS170 Chainsaw Worth Fixing?

  Рет қаралды 132,969

The Lawnmower Lady

The Lawnmower Lady

Күн бұрын

Пікірлер: 270
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
DISCLAIMER: In my haste of reassembling this saw for the umpteenth time, I assembled the metering diaphragm side of the carb with the gasket flipped. This will cause flooding. However even if assembled in the correct order, this would not address the gaping hole that was sucking in air on the worn intake manifold boot at 26:24 The correct order is carb, gasket, diaphragm, cover. My sincere apologies for any confusion this might cause. If this video helped you, please consider clicking the $THANKS button above 🙌 Watch this video next to see how I fabricated my pressure/vacuum tester: kzbin.info/www/bejne/fpO2k6idiq2HrqM
@jimbrewer2893
@jimbrewer2893 9 ай бұрын
Compost happens. You corrected it.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
@@jimbrewer2893 😹
@mrparlanejxtra
@mrparlanejxtra 8 ай бұрын
While a new saw might be the go, a new intake boot would fix it and it would do another turn. Having put all the parts into it, it seems a waste to throw it in the parts box. Why not fix it and buy a second new saw?
@Wanous-hv7zo
@Wanous-hv7zo 8 ай бұрын
Put a fully adjustable 025 carb on it
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
@@Wanous-hv7zo that works too, but that wouldn't fix the worn intake manifold
@hickorystx
@hickorystx 9 ай бұрын
Stella, this was absolutely the best video I have seen in a very long time. The detailed narration with rationales was over the the top for me. BRAVO!!!! How you kept it all together with all the tiniest of parts and assembled with confidence was simply breathtaking. I am so impressed with your cool demeanor, confidence and expertise. You are one of those special people that makes this country great!! Thank you so very much for sharing your projects. Whomever provided you with this challenge should be thankful for your skill and expertise, including your physical dexterity!!! What a PRO you are. God Bless...! 😀
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thank you so much Mr G!
@garys8754
@garys8754 7 ай бұрын
As a MS170 owner for the past 6 years who has performed basic maintenance on my saw, I found this video very informative and well done. I’m at the point of having to perform some of the maintenance shown here so what I learned will be put to good use. A tip O’ the hat to you.
@TheLawnmowerLady
@TheLawnmowerLady 6 ай бұрын
Glad it was helpful!
@Chucky-b7v
@Chucky-b7v 9 ай бұрын
As soon as I saw that exhaust I knew that the spark arrester was fully blocked, lol. The rest of the saw was a real mess. As usual you’ve done a great job and very thorough.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I appreciate you watching!
@G.I.JeffsWorkbench
@G.I.JeffsWorkbench 9 ай бұрын
Wonderful job talking us thru what you did & why you did it. If I was in your area, I’d drop off my small engines for your patient repair. Since i’m not, I appreciate your taking the time to show us how it’s done. Thank you!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I appreciate you watching. Cheers!
@BrucesShop
@BrucesShop 9 ай бұрын
That bottle of pinot grigio helped.. Thanks for taking us to school Stella.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
😀 Any time Mr Bruce! Cheers!
@guzziwheeler
@guzziwheeler 2 ай бұрын
Well, this is the first video of you that I watch, and I am really scared that you have gas that looks like white wine in a wine bottle in your shop. People have died because of such negligence. This is anything but professional. I give this video a thumbs down for that. In my shop, I do not tolerate any container with a liquid in it without a label which tells what is in it.
@ghostdevill
@ghostdevill 8 ай бұрын
I love the MS170 ! I own 2 off them and some bigger versions. But these tiny saws never let me down! Just clean them good after use and they run for years.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
Take good care of anything, and it lasts a long time. I appreciate you watching.
@dougs6460
@dougs6460 7 күн бұрын
I have a 45 year old 038, and decided that I needed a lighter saw, so I bought an MS170. I liked it so much I bought a second one about 3 years ago. All 3 saws run fine, too bad Stihl has discontinued them. Get replacement parts while you can!
@hickorystx
@hickorystx 9 ай бұрын
Thanks!🙏
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Whoa! Mr G!!! It's my pleasure. Super thanks to you for supporting my channel. Cheers!
@dad2ni
@dad2ni 9 ай бұрын
Excellent videos. Thanks!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
And a huge Super Thanks from me for supporting my channel! I truly appreciate you watching my videos. Cheers!
@stevenvanheel3932
@stevenvanheel3932 Ай бұрын
I’ve been working on everything from a hedge trimmer up to a 18 wheeler for years and I learned quite a few little tricks while watching this video. Very interesting!
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@hubby-tubadventures01
@hubby-tubadventures01 9 ай бұрын
"Tom" re the mityvac, I had one delivered about 8 hours ago after seeing the rave reviews. I have a dud. Box is internally battered and it holds no pressure or vacuum. The dial is all scuffed and I think they sent me a second hand unit. No user instructions BUT the warranty was present. Yet to do my return request as I got too busy watching your vids. Keep 'em coming.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Dang! That's terrible. If from AMZN, yes there are often QC problems with returns. I hope you get a good one soon. I already bought one, no regrets. Thanks for watching. Cheers!
@hubby-tubadventures01
@hubby-tubadventures01 9 ай бұрын
@@TheLawnmowerLady Yep AMZN, have been good overnight but i have ordered a new one and instructed them to contact the company and perform QC and better packaging. AMZN gifted me £10 but I just wanted what I ordered. HeyHo, I have to wait another fortnight.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
@@hubby-tubadventures01 Score! A £10 discount.
@VintageEngineRepairs
@VintageEngineRepairs 6 ай бұрын
Sorry to hear that mate, that sucks :(
@BearE9090
@BearE9090 9 ай бұрын
Great tip on how to preasure test the crank case. Thanks.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Glad it was helpful!
@BaberJacks
@BaberJacks 4 ай бұрын
My ms 170 just stopped working mid use . Turns out the crack case has hole/ cracked.
@filip100s
@filip100s 9 ай бұрын
At 18:35 wrong order of diaphragm and gasket...😢
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Did you read my pinned comment?
@PDAUSRC
@PDAUSRC 5 ай бұрын
Finally bought a compressor to have compressed air for cleaning and drying etc. Great tool to have. Thx for your videos, hope you are going ok, looking fwd to next video!
@TheLawnmowerLady
@TheLawnmowerLady 5 ай бұрын
I've been on a little break. Thanks for asking. I appreciate you watching. Cheers!
@PDAUSRC
@PDAUSRC 5 ай бұрын
@@TheLawnmowerLady More to life than pleasing all your KZbin fans! I've started a small repair shop in retirement for a hobby really. Prob about 40 or 50 machines so far. You and the usual others in the small engine clan have been a terrific help and I enjoy all your adventures! Pete.
@robertblacksmith4355
@robertblacksmith4355 9 ай бұрын
Friend gave me his Stihl weadeater & shindaiwa blower in that condition both needed tune ups both work much better now great video Tom!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I appreciate you watching. Cheers!
@rickthelian2215
@rickthelian2215 9 ай бұрын
I thought that at the beginning Stella, being $199.00 a Stihjn shop would of charged an arm and a leg plus parts- Best path is to replace and keep old one as a parts machine😊
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I think a happy customer at the end of the day is a good thing. Thanks for watching.
@HobbyMotorDK
@HobbyMotorDK 9 ай бұрын
Good video Stella - it clearly shows the amount of work and frustration associated with repairing low cost chainsaws - thanks for sharing this.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thank you very much Claus! They are frustrating.
@scottmattoon9054
@scottmattoon9054 24 күн бұрын
Great job! I really appreciate you sharing your work. I learned a lot! I have all stihl saws but have never fortunately had any problems.. Bottom line... I love to learn about them..
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@CaliRootstoTennesseeBoots
@CaliRootstoTennesseeBoots 15 күн бұрын
I like your Torch trick on that spark arrestor. Like magic. We'll done Lawnmower Lady!
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@donmoore7785
@donmoore7785 8 ай бұрын
Oh snap! I was waiting to see a great running saw, after your excellent repair work. Personally, I did something really foolish that led to the demise of my MS250, same age as the MS170. I bought a new one, and have the original for parts... Great video.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
You and me both! If it were my saw, I might have fixed it, but I don't blame the owner for pulling the plug before repairs got expensive. He now has a great parts saw. That piston was in great shape. I appreciate you watching. Cheers!
@alext8828
@alext8828 7 ай бұрын
18:52, Why does it look like there's a carb passageway not covered on that pump cover? I'm not familiar w/ these carbs so excuse my question please.
@TheLawnmowerLady
@TheLawnmowerLady 7 ай бұрын
If I recall, that's an alignment stub. It doesn't pass through.
@alext8828
@alext8828 7 ай бұрын
@@TheLawnmowerLady Ah so. Makes sense.
@timvoiss1568
@timvoiss1568 9 ай бұрын
You might want to put a rag or something blocking the exhaust port when cleaning to prevent anything from getting inside.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
You are absolutely right. Cheers!
@nashguy207
@nashguy207 9 ай бұрын
Great video Stella. I hate working with the linkages on a chainsaw. I love my Vessel screw drivers. I have a mighty vac 8500 kit and it is very handy. Have a great day!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Cheers Bob! I love mine too!
@luxbeci2
@luxbeci2 9 ай бұрын
What is it pressure méter maschine What you use pressure text in carburator and engine?
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Mitivac MV8500
@ianlaconianhthesmallengine124
@ianlaconianhthesmallengine124 9 ай бұрын
No I'm not Tom. I'm the lawn mower lady. Nice work.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I appreciate you watching. Cheers!
@VintageEngineRepairs
@VintageEngineRepairs 6 ай бұрын
Hahaha
@johnclarke6647
@johnclarke6647 9 ай бұрын
I have seldom found a new lifter lever to be improperly adjusted. I always use every new part in a rebuild kit, including the spring. Did I see you put the gasket on the pump side, first. The diaphragm goes against the carb body on the pump side and then the gasket. On the metering side the gasket does go on first and then the diaphragm. I use a Might Vac for pressure testing.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Yes, did you read my pinned comment? Mitivac is a great tool for small engine diagnosis.
@edwardsabo8368
@edwardsabo8368 9 ай бұрын
When you showed the piston going up and down it looked like there weren’t any piston rings on that piston.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
It was hard to see, but the rings looked good. Still had 135 PSI
@edwardsabo8368
@edwardsabo8368 9 ай бұрын
@@TheLawnmowerLadyexactly
@Dicofol1
@Dicofol1 8 ай бұрын
Great detailed video, thanks for sharing. What is your opinion of clone chainsaw kit and of the cheap Amazon chainsaws?
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
I appreciate you watching. I think you nailed it on the head… Cheap, and near about disposable. There’s far better quality in an established brand as well as the follow-up customer buying it from a local shop.
@STTC
@STTC 8 ай бұрын
Wowsers, this video flew! well done on this one
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
I honestly wish I knew why, LOL. Thanks for watching. Cheers!
@thomasmagiera3283
@thomasmagiera3283 8 ай бұрын
wow! That was sure a lot of time consuming effort. Great Instructional video. I really enjoyed that. Thank you.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
I appreciate you watching!
@garseetr
@garseetr 5 ай бұрын
It’s been several months since your last video. Just checking in to see if you are ok. Love your videos.
@TheLawnmowerLady
@TheLawnmowerLady 5 ай бұрын
All good, thank you. I desperately needed a break, to take care of home repairs, sick cats, etc. Some times life gets in the way of living. Cheers!
@luvegg7890
@luvegg7890 9 ай бұрын
Great useful video.. I think you may have put the metering diaphragm gasket on the wrong side of the diaphragm causing the needle valve to open early.. Sorry if I'm wrong..
@KensSmallEngineRepair
@KensSmallEngineRepair 9 ай бұрын
You ARE right! Gasket first on Metering Diaphragm side! Will cause flooding!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Yikes! I'm busted.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thanks for pointing that out. I did pin a comment to address this. This chainsaw was a multi-day challenge, (wrong parts arrived, multiple days I could not work on it blah, blah, blah) and if you notice that glove I'm wearing only on my right hand, I slammed my knuckle trying to start it the week before. I'm not saying this is any reasonable excuse for this oversight. There are often hours of video takes to get a good camera angle, or decent lighting. And we all make mistakes sometimes. This would not fix the gaping air sucking hole due to the worn intake manifold boot (26:24)
@Rein_Ciarfella
@Rein_Ciarfella 9 ай бұрын
@@TheLawnmowerLady It’s True Confessions at Stella’s! 😂👍❤️
@Rein_Ciarfella
@Rein_Ciarfella 9 ай бұрын
I have a clamp on vice I put on my outside bench any time I have a muffler like that. I burn off the spark arrestor and the muffler completely. The muffler always produces a lot of smoke and flames up a bit when the carbon starts to burn. I keep going, into both sides, until it stops smoking. Does a thorough job in a fairly short time.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Good ideas.
@Turningwrenches85
@Turningwrenches85 8 ай бұрын
Sometimes on the parts cannon you gotta know when to cease fire and retreat , this one was more better off cost effective wise a parts machine for him well done stella 🔧
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
Haha! You know it. Cheers!
@Turningwrenches85
@Turningwrenches85 8 ай бұрын
@@TheLawnmowerLady cheers 🍻
@philipbreau1246
@philipbreau1246 Ай бұрын
I discovered your channel by KZbinr James Condon. Subscribed
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@joerhea5785
@joerhea5785 9 ай бұрын
Another great video!!
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Glad you enjoyed it!
@HomeGaragechannel
@HomeGaragechannel 9 ай бұрын
I like your pressure tester, I need to get one.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
It's a great diagnostic tool, let alone a good brake bleeder for my scooter. I've already purchased the MV8500. I've gotten my money's worth on that old kit.
@joseph9915
@joseph9915 7 ай бұрын
In the UK for the Carb Manifold the OEM 1 is $20 and the cheap ones from China about $3 to $7.
@ls2005019227
@ls2005019227 4 ай бұрын
Excellent information/video! Have you compared the view count of this video (chainsaw repair), to other videos focused on mowers.....? 🤔
@TheLawnmowerLady
@TheLawnmowerLady 4 ай бұрын
For some reason, I can't figure out why, some videos take off like wildfire, others simmer before taking on a new life, some just never get a go. If I knew why exactly, I would be very wealthy. Now I just have a fun and satisfying hobby to share.
@jonlambshead5115
@jonlambshead5115 9 ай бұрын
Great Job , Well Done
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I appreciate you watching. Cheers!
@andersforrad
@andersforrad 9 ай бұрын
Nice video and thanks for sharing. I totall agree, sometimes is just not worth it and you gotta know when to hit the brake. Nice video and goor thoughts as always. Cheers! 👍
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thank you so much Anders! I appreciate you watching.
@cathymuehring893
@cathymuehring893 8 ай бұрын
Glad to find your channel. I love my Sthil 170 but exhaust has been wet since new. I threw away the spark arester. Is it OK to spray that brake cleaner in the cly and wash away the lube ?
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
If you do that, you'll need to add a few squirts of 2-stroke oil in the cylinder, pull the starter to get those rings we'll lubed. Expect it to be a little smoky when you first start it. That brake cleaner will flush out all the good stuff. Thanks for watching.
@luxbeci2
@luxbeci2 9 ай бұрын
Why you not use Pascal and Bar pressure méter test? I use Bar my Stihl 880 and Stihl 171 and Stihl FS560 and Stihl HS45
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
PSI is most common for pressure and and inHG (inches of mercury) is used for vacuum.
@jrlops6147
@jrlops6147 Ай бұрын
There is an air leak in carb or between carb ang airfilter
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
The leak is due to a warped intake manifold boot.
@luxbeci2
@luxbeci2 9 ай бұрын
What problem this Stihl 170? You not know setting carburator Jack? I have Stihl 171 and Stihl 880
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
There are no adjustments on Stihl MS170 carburetor. What problem with you?
@luxbeci2
@luxbeci2 9 ай бұрын
@@TheLawnmowerLady Why you say What problem with me??
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Your comment sounded rude and condescending: assuming I don't know how to set the adjustment screws on a 2-stroke. Why call me Jack? Is that shorthand for I don't know jacks**t ? There are no adjustments on a Stihl MS170 carburetor. What do you not understand about that? Even if there were H and L screws, no adjustments would over come the massive air leak presented by the old and compressed intake boot. Did you watch the video till the end? Further repairs would be more expensive that buying a new one.
@MartinD9999
@MartinD9999 Ай бұрын
That was pretty good. Thanks! 👍🏽
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@rodneymiddleton9624
@rodneymiddleton9624 10 күн бұрын
I was screaming “It’s on backwards!!!!!!” Lol! You can’t win them all! Thanks. 27:51
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I know... I had taken that thing off at least four times. I was really over it, honestly.
@rodneymiddleton9624
@rodneymiddleton9624 4 күн бұрын
@@TheLawnmowerLady I totally understand. I have a Generac with a floaty governor that's driving me crazy. I just had to put it aside and work on something else. I'll go back to it later. Thanks!
@pracakosaipilarka4301
@pracakosaipilarka4301 9 ай бұрын
Respect 👍
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thank you for watching!
@johnclarke6647
@johnclarke6647 9 ай бұрын
Use Purple Power to clean saws with an old tooth brush and compressed air. This saw has been used a lot with bad fuel and left to sit a long time with ethanol fuel in it from what I can tell. The only way that throttle rod came off is for it to be removed by someone. I use Walbro or Zama parts on my saws. Sten makes some good parts but I do not use them unless they are all I can get, which is not usually the case. My MS 170 is sitting out in my shop loaded with Stihl MotoMix. I would bet money it will not run and it has been a year since I ran it.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Actually that throttle linkage can pop off when the choke lever is forced around that barb sticking out that engages the linkage into the 1/2 choke position. When that happens, the small bend in the linkage pushes around to the wrong side of that plastic barb. The linkage then pops off the throttle on the carb body when you move the choke handle past the 1/2 choke position into the off position. The same thing can happen if the choke lever is forced into 1/2 or full choke position without engaging slightly on the throttle.
@johnclarke6647
@johnclarke6647 9 ай бұрын
@@TheLawnmowerLady you mean if someone forces the control lever out of its Norman stepped position the throttle rod can disengage. I have never had that to happen but I know how to crank a Stihl saw. I have about 20 of them.
@joehead1294
@joehead1294 8 ай бұрын
There's a pile out back of every small engine shop composed of residential equipment like this. Owner could have taken better care but he knew what he had. Used hard, put up wet.
@rhodeislandfirearmsownersl9916
@rhodeislandfirearmsownersl9916 2 ай бұрын
I love this channel.
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
I appreciate you watching. Cheers!
@shane3878
@shane3878 8 ай бұрын
I have had mine for many years and abused the living heck out of it. Using for roots and stumps with carbide chain the last few years. Still runs like a top. But the chain started coming loose quickly. New bar, chain, sprocket and adjuster. Same thing. Loosens up after a couple revs. Shaft is spinning visually true with no binding. Last thing I'm gonna do is change the cover since these don't have the bar bumpers like the bigger saws. 200 bucks for a new one so not gonna put anymore money into it.
@noelstractors-firewood57
@noelstractors-firewood57 9 ай бұрын
That’s to bad after that work it didn’t operate Stella. Any way, that’s the way it goes, have a great weekend. 👍🏻👍🏻👋👋
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thanks, you too! I appreciate you watching. Cheers!
@vailaulau5938
@vailaulau5938 7 ай бұрын
Good job.i want to learn more❤
@RaysLaughsAndLyrics
@RaysLaughsAndLyrics 9 ай бұрын
(Not a task 'anyone' can see to complete success.) Tom now at an impass; Rubber gasket B trash Dick is no help as well, Failed, no time 2 dwell Harry does concur A new saw, fer sure! Stella: Another great repair video showing the reality of small engine repair. Thanks for your valuable time and resources, so generously shared with us. ⭐️⭐️⭐️⭐️⭐️👍
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thank you!!!
@RaysLaughsAndLyrics
@RaysLaughsAndLyrics 9 ай бұрын
@TheLawnmowerLady BTW.. a thumb ring is a reminder that ride sharing need not involve an APP✌️👍
@davidwallace3069
@davidwallace3069 3 ай бұрын
I bought a 170 from the flea market sight unseen missing spark plug air filter and totally filthy. Cleaned it up , cleaned carb , filter , plug. Thing runs 100% for 2 years and still 100% nothing but trufuel thru it.
@tracythompson1692
@tracythompson1692 9 ай бұрын
good advice
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Glad it was helpful!
@johnclarke6647
@johnclarke6647 9 ай бұрын
I use a .25” drill to seat the inlet screen in its hole.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
That works too. Thanks for watching.
@haneyoakie14
@haneyoakie14 9 ай бұрын
Tom! That is Vintage! 😊❤
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Sorta like me. 😹
@haneyoakie14
@haneyoakie14 9 ай бұрын
@@TheLawnmowerLady Stella- you are the best vintage.
@VintageEngineRepairs
@VintageEngineRepairs 6 ай бұрын
Hahaha
@redtailhawk289
@redtailhawk289 4 ай бұрын
Great video
@TheLawnmowerLady
@TheLawnmowerLady 4 ай бұрын
Thanks!
@spyder000069
@spyder000069 5 ай бұрын
Gave up too early on this one. I suspect the spark arrestor was only issue and the throttle arm fell off when he was monkeying with it. The symptoms match up exactly and I have personally ran into that problem a few times before. Excessive idle time and/or heavy oil mixture does it and was also indicated by the spark plug condition (although the spark plug was still fine and would have cleaned up). The later problem of it not running was caused by the carb rebuild which was probably identified after talking to the customer and the decision was made to go new. I don't suspect the intake boot because it held vaccum with no problems and if there was an issue it would have showed up there. Even if there was a tiny issue a light smear of rtv would have solved it but I don't believe it was necessary in this case and feel the vacuum test proves that theory. The saw had great compression and it was a xmas gift from a parent so while financially more labor sometimes doesn't make sense the sentimental value may.
@TheLawnmowerLady
@TheLawnmowerLady 5 ай бұрын
It only held vacuum when I inserted that rubber in between. I was trying to test the crankcase seals, and it would not seal until I added that rubber. That intake manifold should be sitting proud 1mm or so on the engine case. It was one massive sucking air leak. I agree on the sentimental value, but the guy is keeping the saw for parts. Thanks for watching.
@chuckhortler2814
@chuckhortler2814 3 ай бұрын
@@TheLawnmowerLady al lot of 3rd party carbs now include an intake manifold. Are those junk? they're just plastic... how can that possibly hold up when the saw gets hot? That almost seems like a flaw which would lead to the conclusion: do not buy another one of this model ... going to (eventually) have the same problem?
@starrm733
@starrm733 3 ай бұрын
@@chuckhortler2814 I sort of agree, but the intake is a wear/tear item. Whatever the material is does compress, and eventually loses its sealing capabilities. Aftermarket parts can be hit and miss, often not worth the cost savings.
@chuckhuff7123
@chuckhuff7123 9 ай бұрын
Looking like you'll need to put a longer pull start rope in that saw😮
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
That would be helpful.
@Big_Johns
@Big_Johns 9 ай бұрын
Well Tom you can't say you didn't try, nice explanation as you went along though. Amazon has the same MityVac MV8500 for $88 instead of $125 from Walmart. 👍🙂
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thx! That AMZN link is in the description. The pop-ups changes regularly. Thanks for watching.
@Big_Johns
@Big_Johns 9 ай бұрын
Guess I better start reading the descriptions huh. 🙈🤣
@JosephTaverns
@JosephTaverns 8 ай бұрын
Fire it up elkskins the Legend Taryl no body Beat 🎉🎉🎉🎉🎉🎉🎉 p.s. Taryl wood have figured that out and saved this man in Alot of different ways😢😢😢😢😢😢😢😢😢😢😢😢😢
@gonojo6527
@gonojo6527 7 ай бұрын
These are chainsaws for occasional use, it was probably never truly maintained as it should have been. That being said for everything you put into it depending on where you are and how some places price gouged you these chainsaws are selling for $200 and many places less so I would go with the new MS 170 at your local Stihl dealer not necessarily or Ace Hardware or anything else that marks them up.
@rickthelian2215
@rickthelian2215 9 ай бұрын
Stella aren’t they only $199 new ?
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Yep! I showed some ads towards the end. If it was mine, I might have fixed it.
@almclean4835
@almclean4835 9 ай бұрын
Can’t win them all. I’ve just recently worked on a ms170. It wouldn’t start, easy fix. Just had to put the plug back into it, somebody had taken it out and not put it back in !
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Haha! If they were all that simple... I did get a Honda mower one time... the owner complained it would start easily, run OK for about 3-4 minutes. Turns out she was turning the fuel tap on for about 5-10 seconds, while she checked/added fuel. She then turned the fuel tap off, and then started the mower! SMH
@Vipex_134
@Vipex_134 9 ай бұрын
If this plug is bad, you should see my plug. It is very VERY oily. It has to be tho because my piston is scored and it has about 1.2hp from an 1.9hp
@ILOVEMACHINES225
@ILOVEMACHINES225 9 ай бұрын
great video
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thanks!
@DylanSamaroo1995
@DylanSamaroo1995 Ай бұрын
You installed the diaphragm before the gasket that’s the only reason it keeps over fueling the needle can’t seat
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
No, that was like the 4-5 times I took this apart. In my haste of reassembling this saw yet again, I assembled the metering diaphragm side of the carb with the gasket flipped. This will cause flooding. However even if assembled in the correct order, this would not address the gaping hole that was sucking in air on the worn intake manifold boot at 26:24
@hillbilly4christ638
@hillbilly4christ638 8 ай бұрын
Someone brought me a saw like this. The boot between the carb and the cylinder had a crack in it, leaned out the mix and fried the piston and cylinder. I sourced the parts and they cost more than a new saw. I found it kind a play on words, Stihl, steal. I was working on old school saws without the boot that were still running and just needed some maintenance. Very interesting, anti vibration turned into vibrating that dudes money out of his pocket. Yup, steal.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
I hear ya!
@cancelchannel3394
@cancelchannel3394 8 ай бұрын
I would have built that little saw into an animal, stihl products are always worth the effort and money to rebuild 😊
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
If it was mine, I probably would tear it down and replace that intake manifold. Hard to justify that expense to a paying customer. I appreciate you watching. Cheers!
@cancelchannel3394
@cancelchannel3394 8 ай бұрын
Tin Man in Canada would have turned that little MS170 into a beast of a saw 😊
@johnclarke6647
@johnclarke6647 8 ай бұрын
A Champion plug is not the Stihl factory plug for this saw. It should be a Bosch plug. Bad gas is the most common two cycle problem. Not running them wide open in wood is another problem. They are made to operate at full throttle in wood. Failure to do so will block the spark arrester screen.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
Champions are not shabby plugs. I can't say the same about Torch or E3, they go directly into the bin.
@Kyle-bb9zp
@Kyle-bb9zp 8 ай бұрын
It's worth fixing but lot of work had to go into it to make it a lot better
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
If it was mine, I probably would fix it. But cost prohibitive for a client.
@shanehanlin9253
@shanehanlin9253 6 ай бұрын
See this is what I want to see a regular person doing this stuff she isn't using anything that the everyday person doesn't have
@TheLawnmowerLady
@TheLawnmowerLady 6 ай бұрын
I appreciate your observation. I try to make my videos accessible to the average homeowner that may not possess all the speciality tools that often make the job easier. Thanks for watching. Cheers!
@MartinD9999
@MartinD9999 Ай бұрын
Well, the pressure/vacuum tester isn’t something most people have. I doubt 5% of the population own any vacuum/pressure gauges. Did you ever get that MityVac kit donation?
@Rein_Ciarfella
@Rein_Ciarfella 8 ай бұрын
Hey, Stella! Thought you might want to see this comment I read on James Condon’s channel today. “@comeasyouare4545 48 minutes ago Build a shaker, or tumbler for gas tanks. An old cloth dryer makes a good one. Just disconnect the heating element. Drill holes through. the drum to suspend the tank in the center at four points solid cooper wire. Number 12 should do.” Maybe time to scrounge one of those old dryers people throw away because they don’t heat anymore? 😉👍
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
If I lived on a farm, maybe. I’m sort of landlocked, and live in a tiny house, LOL
@MaximRecoil
@MaximRecoil 6 ай бұрын
The owner should just buy an electric chainsaw rather than another Stihl MS170. I think that electric chainsaws have made low-end gas chainsaws more or less obsolete. Gas may still be king for professionals, but they aren't the ones buying $200 chainsaws, and they know how to maintain them. For someone who just uses a chainsaw for occasional yard work at home I think they'd have better luck with an electric one.
@TheLawnmowerLady
@TheLawnmowerLady 6 ай бұрын
I agree.
@rogergoodwin5533
@rogergoodwin5533 Ай бұрын
Fuel lines deterate. Crack ect. Over time.
@davea5150
@davea5150 9 ай бұрын
Maybe the gas mixture was to rich, just a thought.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I think just years of neglect. The only reason it was running before I cleaned it up was it was so clogged up. It was getting air through the manifold leak enough to idle, but the screen was so clogged, it died
@jonathandavis762
@jonathandavis762 4 ай бұрын
If this person would have ran amsoil in it, it would be a lot cleaner 😂
@PJBHolden
@PJBHolden 9 ай бұрын
Trash the spark arrestor entirely
@brianking1138
@brianking1138 9 ай бұрын
This is why so much cheap equipment gets thrown away. My local shops charge $90 per hour. Throw in a few parts and you can spend more than its worth really fast.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Sad but true.
@haneyoakie14
@haneyoakie14 6 ай бұрын
You doing ok Stella? I miss your awesome content and your can-do attitude. I hope you are just too busy to post videos right now.
@TheLawnmowerLady
@TheLawnmowerLady 6 ай бұрын
Working on it Tom! Just on a little break. I appreciate you checking in. Cheers!
@haneyoakie14
@haneyoakie14 6 ай бұрын
@@TheLawnmowerLady I worry about my peeps. I’m happy to hear UR OK.
@bradpotter6401
@bradpotter6401 9 ай бұрын
As much time as you had invested in this saw, you should have finished the job and replaced that seal between the carb and cylinder. I wouldn't have charged the guy any extra time because it's something that should have been done when you had the carb off for rebuilding. That's just my 2 cents worth.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Thanks for watching.
@bradpotter6401
@bradpotter6401 9 ай бұрын
@@TheLawnmowerLady I failed to mention in my earlier comment that you are a knowledgeable mechanic and I like your technique. I use old gas as my cleaning solvent too.
@thegulagarchipelago5921
@thegulagarchipelago5921 4 ай бұрын
Mine won't even start anymore...❤❤😂😂😂
@JPLBOUND
@JPLBOUND 4 ай бұрын
Don't feel bad. I bought one of these garbage saws, and it's never run propey. Two carbs were replaced under warranty, and it still won't run. The saw has less than 3 hours on it. I'll never buy another Stihl chainsaw of any type again.
@chuckhortler2814
@chuckhortler2814 3 ай бұрын
$1.99 worth of materials foiled a repair on a $199.00 saw? Couldn't you just trace the gasket on the outside of the carb on a piece of (thicker?) gasket material and put that against the piston-side of the carb? the rubber you had on there in the compression test was thick but not ... beyond the dimensions of thicker gasket material? My saws exhibits the same problems ... runs great then cuts out. I have two 180Cs which are now about equally old and cut out at about the same age with the same hours on them.
@TheLawnmowerLady
@TheLawnmowerLady 3 ай бұрын
The rubber piece was able to be compressed and fill the gap. The gasket(s) I tried to make would not fill the large gap.
@greenkeeper448
@greenkeeper448 9 ай бұрын
Opti-2 to the rescue.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Interesting. I had to look that up. Do you use that in your 2-T gear?
@johnclarke6647
@johnclarke6647 9 ай бұрын
Use Moto Mix in it.
@stevemac8436
@stevemac8436 Ай бұрын
Lawnmower Lady, where are you?
@TheLawnmowerLady
@TheLawnmowerLady 4 күн бұрын
Eastern Seaboard.
@Lovinflyindrones2022
@Lovinflyindrones2022 4 күн бұрын
Have u quit posting video's Stella ?? I miss your video's mate Stella The Lawnmower Lady
@TheLawnmowerLady
@TheLawnmowerLady 3 күн бұрын
Thanks for asking William, Ive just been swamped with life. Not to mention I've been living next to a construction site for the last 4 months. The only days there is no noise, it's also raining. LOL
@Lovinflyindrones2022
@Lovinflyindrones2022 3 күн бұрын
@TheLawnmowerLady ok 👍 hopefully soon everything will work out for you mate Stella The Lawnmower Lady
@campervanjimbob3764
@campervanjimbob3764 9 ай бұрын
Crank seals
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Nope, that's what I showed when I blocked off the intake. The crack seals held pressure and vacuum.
@DIYVariety
@DIYVariety 9 ай бұрын
Great job but cant win them all
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I know, right?
@alext8828
@alext8828 8 ай бұрын
That air filter is hard as a carp! And there's yer dinner.
@dennisberghorn9512
@dennisberghorn9512 3 ай бұрын
Just by looking at muffler spark arrestor has to be plugged😅😅
@TheLawnmowerLady
@TheLawnmowerLady 3 ай бұрын
That amongst other issues.
@CompetentSalesUSA
@CompetentSalesUSA 9 ай бұрын
May need gloves when spraying carb cleaner . Not good to get it on the skin.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
I often forget, it is a good idea.
@philliphall5198
@philliphall5198 9 ай бұрын
If it was that bad after a life time of mechanic work I would not be 73 and cutting firewood all day
@stevenbelsky1652
@stevenbelsky1652 8 ай бұрын
I don't understand why people spend all this money on equipment and don't do general maintenance on it.
@TheLawnmowerLady
@TheLawnmowerLady 8 ай бұрын
I know. Right?
@JamesSmith-dt3yf
@JamesSmith-dt3yf 3 ай бұрын
They have too much money
@kirkwesterveltoutdoors
@kirkwesterveltoutdoors 2 ай бұрын
What has happened to the Lawnmower Lady. Have we lost another great KZbin creator?
@TheLawnmowerLady
@TheLawnmowerLady 2 ай бұрын
Thanks for asking! I've been way too busy with home repairs and such to edit videos. Sometimes life gets in the way of living. I've got several videos "in the can" but no need to release a video on how to get your mower out of winter storage this late in the fall. LOL!
@1RCPILOT
@1RCPILOT 2 ай бұрын
All those little parts and pieces in that carburetor. If I had a carburetor issue I’d just buy a new one! More power to you Lawnmower Lady!!! 😊
@stevemac8436
@stevemac8436 Ай бұрын
​How about a video for people who don't know how to store their mower and just get the gas out of it and fog it till spring. Do you normally change the oil just before storing for winter?
@johnclarke6647
@johnclarke6647 9 ай бұрын
That is not the factory plug for a MS 170. It should have a Bosch WSR6F in it. The owner is lying about his saw.
@TheLawnmowerLady
@TheLawnmowerLady 9 ай бұрын
Granted the owner has never taken it to a shop for service in its lifetime, but calling him a liar is a bit harsh. I don't think changing a spark plug, or replacing the chain (which he as done) really moves the needle here. I drive antique 2-stroke motor scooters, and I don't consider swapping out a spark plug on the side of the road as service or maintenance.
@PatrickRaleigh
@PatrickRaleigh 6 ай бұрын
Great might keep those grandkids off those iPads
Never Do This to your Chainsaw ... How to Repair it if you do
27:47
Helping U online
Рет қаралды 1,3 МЛН
Restore This Stihl BR420 Blower to Its Former Glory
32:25
The Lawnmower Lady
Рет қаралды 9 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Stihl MS170 | Cheap Must Have Upgrades | Huge Improvements #stihl
15:11
The Rusty Garage & Homestead
Рет қаралды 29 М.
Chinese Chainsaw Challenge - Will it Run? (Unbelievable Amount of Problems)
1:50:08
98% Make This Chainsaw Sharpening Mistake (Even The Pros)
12:54
KERF Tools
Рет қаралды 2,7 МЛН
Stihl MS 180 WONT START OR RUN .LETS CLEAN THE carburetter
25:01
Kyle Hall woodworker
Рет қаралды 51 М.
STIHL 034 Chainsaw!  HARD To Start!  Can We Fix It? Let's Go!
1:14:23
Married with Small Engines
Рет қаралды 49 М.
3 Great Upgrades for the Stihl MS170 and MS180 Chainsaw
4:37
Hipa Store
Рет қаралды 93 М.
The genius girl repairs and restores the chainsaw
30:11
Thoa Single Girl
Рет қаралды 18 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН