Most EFFICIENT rotary set up for Diode Lasers! Featuring The New Atomstack Ace Pro V2 (A20 Pro V2)

Are you ready to upgrade your Rotary setup you have been struggling with? For the cost of some plywood or MDF you can completely change the way you use your rotary. I got so frustrated trying center the laser over my rotary projects, stacking things up under my laser to fit large jugs on my rotary, and feeling like my laser was on house arrest, only allowed out for rotary jobs. So when I upgraded to the new Atomstack Ace Pro V2 I decided it was time for a complete overhaul of my rotary setup. The baseplate that holds the Rotary firmly in place makes the need to square up the rotary to the laser is a thing of the past. My new rotary leg blocks lock my laser into place and allow me to rise my laser to any height that I need. The files I provide for the riser legs are specifically for the Atomstack Ace Pro V2 laser but can take my idea and alter it to work with any laser and trust me this makes using a rotary so much easier. They might also work with other lasers that have L shaped legs but I have not tested them so I can't say for sure.
80$ off Ace Pro V2 20W use code "WyldeWillow" at check out
www.shareasale.com/u.cfm?d=11...
R1 Rotary Roller set
shrsl.com/4if48
R1 Rotary (Just the Chuck Rotary)
shrsl.com/4if4e
F3 Cutting Panel
shrsl.com/4if4h
Get yourself a Rotary Tumbler Jig "The Laser Twin Jigs"
www.etsy.com/shop/TheLaserTwi...
If you want to support my channel and help me get my first sells on Etsy you can buy the files to
build this setup on my new Etsy store. 50% off just for my viewers use code ""KZbin50"".
Good untill 06/30/24
(let me know how purchase goes for you. Brand new to trying to sell files and want to make sure
everything goes smoothly)
www.etsy.com/shop/WyldeWillow...
Get the files to build this setup free (please let me know how everything goes with these files
first time trying to share files)
drive.google.com/drive/folder...
Web site I used to make riser legs and focus card holder (can be confusing at first but definitely worth messing around with as you can make a ton of useful stuff on this site)
www.festi.info/boxes.py/
Link to the page I made the riser legs. With all the settings already inputted (5MM material)
shorturl.at/zFMQ3

[@SpicerDesignsLLC]

Great video and editing. That intro had me sold. I actually called the number. Ended up being a hotline for helping cats with missing limbs.

[@WyldeWillow]

💀🤣 you crack me up! Lmao

[@MarksAmazingCreations]

Just started following based on Spicer Design recommendation. Nice channel. Looking forward to watching more videos.

[@WyldeWillow]

Oh so awesome! Thanks for giving me a follow! And ya spicer designs is so cool! I appreciate him giving me a shout out!

[@RBallarddesigns]

Great job. Loved the commercial. Your riser legs look like little buildings. You should lean into that and engrave more windows.

[@WyldeWillow]

Thank you!

[@WyldeWillow]

I could also put little tools or other small things I use for the rotary if I did windows. Great idea. Maybe even little laser cut people hanging out inside the windows haha

[@chadtuggle9814]

If I weren't already subscribed, I would definitely subscribe just because of that amazing infomercial!!!! You rock 😉

[@WyldeWillow]

That’s so nice 🥹 thanks for your support!!

[@peterpizzurro9410]

You get a sub for this!!

[@WyldeWillow]

Woah!!! Love hearing that lol

[@dblack7892]

another great video. keep them coming.

[@WyldeWillow]

Aw thanks so much!!

[@esentl]

creative intro I luvved it

[@WyldeWillow]

Thanks I tried 😂

[@KaylaAnnB]

Love this video!!!

[@WyldeWillow]

Thank you!

[@ALXSHARPEN]

You're funny! I'm almost at 10K you will be there soon You're doing great content!

[@WyldeWillow]

Thanks! 😊 how long did it take you to get 10k?

[@ALXSHARPEN]

@@WyldeWillow Not there yet, almost I started posting videos regularly May 2022 and should hit 9K very soon. I did go from 4K to 8+ very fast. That happened in like 3 months. Regular posting helps and trying to have good content of course. One thing I do that probably hurts is I am really covering two subject knife sharpening & Laser engraving many would say that it should be two separate channels I have more Knife sharpening people but many of my laser companies I hear from like the fact I am in a niche that is unique from just crafters so it has worked well for me and it's been a nice addition to my sharpening business being able to do things like engraving knives and tools. Took me a bit to get my sound and video quality good in my shop environment. One thing I like about your content is you have had great quality from Day 1 when I look back at some of my early videos I cringe at the sound. I am planning to go back and reshoot some that the content is good but my production quality wasn't what it is today.

[@Fancylooks]

I think that stacking system to elevate the machine is genious! The fact that the roll rotary and the chuck are different tools is excellent, I have the XTool rotary that has both in one and it is a lot of time what it takes to put one or the other it makes you feel like not experimenting with it.

[@WyldeWillow]

Totally agree I never used the rollers because it was annoying to switch back and fourth. I will probably use the rollers more now that it's an easy switch

[@laser-guy]

I have that tumbler jig too!

[@WyldeWillow]

Its the best! Definitely a game changer!

[@angrygaragemechanic]

Awesome video and very informative 👍

[@WyldeWillow]

Glad you liked it! Thanks!!

[@ajvaldez]

Love the intro ahahaha ultra max pro 😂

[@WyldeWillow]

Hahaha thanks I didn't know if it was to ridiculous or not. Glad you liked it

[@woodworkergene5416]

haha, awesome intro. I love it.

[@WyldeWillow]

Thanks 😂 I have always wanted to do an infomercial !! lol

[@Roadking73]

Great job,your videos are fabulous. Just finished my enclosure my work area is 30x30 ao thw enclosure is giant!

[@WyldeWillow]

Thanks!! What laser do you have? 30x30 is huge, I need a laser that big for my large signs.

[@Roadking73]

@@WyldeWillow its all home built ,I changed the leadscrews to ball screws on my c NC router and just built a laser with the extra parts.