Is this the cheapest milltek on the market? we fit it.

[@davidandrews5510]

Slightly concerned on how efficiently Steve chopped into that exhaust pipe, although he doesn’t strike me as the type to go around nicking people’s catalytic converters ... ?

[@Mark_s_media]

“Can I move that axel stand as well?” Steve: “I can’t, it’s holding the car up” Special moments 😆🙌🏻

[@Sparkplugsteve]

Hahaha

[@billybish833]

Hey Steve. Just Ordered my milltek with a crossover pipe. Used your discount code. Helpful vid. Thanks very much

[@g.d2450]

seen you cutting that exhaust had my arse twitching as i knew it was going to kick back, had a boy work with me using a 9" angle grinder with no guard kick back and hit himself in the throat, from that day it's always been safety first

[@st200ol]

Great video, there are very few videos on KZbin showing this process. Crazy that the standard exhaust is in one piece from the cat. I just swapped a cat on a 1L MK7 Fiesta absolute nightmare on axle stands on the front drive. Its done now and passed the MOT though so all good.

[@RossRevs]

Top job Steve! Now just to change his numberplate screw caps to the rear yellow set instead of the font white ones, oh my OCD😂

[@garns8878]

Hi What size is the smaller gasket you used ? Thanks

[@CalMillward]

I own a 1.0 Ecoboost fiesta. Moving onto the ST scene in October once my insurance runs out. Can't wait to add mods like these

[@jawdinker554]

Lovely job !!!! Thank you for your fantastic content Steve and big bro Will....😉👍👍👍

[@davidnisbet8508]

Idk about an st but you can definitely wiggle a 1L eco boost exhast out without cutting it not easy though

[@chillisauce6079]

Be a bit worried about the closeness of the top of the tail pipes to the bumper. My Mongoose tailpipe gets proper hot and I wouldn't want it as close as this for fear of melting the fucker. Great vid again Steve and loving the dog shit at 12:53 🤣💩💩💩

[@brianiswrong]

Never realised how easy (for working on your back under a car) it was to change the spring retainers😲 As the owner of a 13 plate ecoboost fiesta,I am going to look at the state of mine and ,if needed swap them out. Did you say the Ka ones fit,and if so what year of Ka? Please Steve.

[@trickym5748]

So easy to change the springs 👌and that exhaust sounds nice great video 👍

[@Atty1958]

Steve still happy with the Worx impact wrench had it awhile now still performing well

[@problakeeeyyy]

Quick wuedtion for you can you tske them bolts out of the flexi

[@Gts2pro]

I have just got delivered 3x power flex bushes for the hangers , Mountune cat back Been on for 3 yrs but notice the rubber on original is flexing to much now knock knock ? Who is there ? Banging 😂

[@simonn2045]

Mine started doing that, swapped the 2 at the backbox because that was where the sound was and did nowt. Got the one at the cat changed and it's made a world of difference.

[@GWLAD]

Maps in Ynyshir built the custom system fitted on my ST170 £320 fitted cat back pops and bangs retaining the CAT

[@urbanjentry222]

Good to see vids again Steve

[@jamiemilton2858]

Have you got a link for the smaller gasket mate?

[@scootermanhappyman4043]

good job fitting that steve on the floor

[@rockpigeon1657]

Where’d you get the exhuast gasket from ?

[@grieeef6326]

Where did u get the small gasket from

[@alex98uk]

Do you know what diameter the standard cat is? I have a Mountune sports cat which is a 2.5" exit and wonder if I'd need the converter gasket like you used. I assume the Milltek is a 3" system, hence the issue?

[@robwebster7406]

Fair play you got lucky with puma speed, I paid for a cross over pipe for a 2016 1.0 eco boost pipe for a focus, 1 vac pipe was on a wrong angle, the over vac pipe had weld in the hole and prim and sec hoses just fit. I had too rework an expensive part. Avoid Puma speed parts 😞

[@shaungowler8909]

Love a good miltek burble in the morning has always Steve doing a great job on channel 😎👍🏻👏🏻👏🏻👏🏻

[@Michael-m4y]

Hi , that happened to a mate of mine, the exhaust grabbed the grinder disk and spat the grinder out and cut straight down his jaw and through his wind pipe very lucky to be alive

[@Sparkplugsteve]

Thats very worrying. I use a face shield but it could still cut through that. I don't think il use it again on an exhaust.

[@garethedwards2883]

Thanks Steve for another great interesting video, a high lift ramp would be great for the job :)

[@Παντελής1997]

how to search diffuser black White?

[@mex8961]

Loving the content Steve👌 Watching all the way from maesteg 😂

[@jamesmunns8366]

Hello were could I get the adapter for the exhusted please

[@ryeguy88]

Is there a link to those spring KA spring isolators?

[@mikemohan3213]

spark plug great vids coswecan is my friend and we watch you guys all the time

[@XBLTacmaster]

thanks bud. your video helped a lot, i basically did it the same exact way

[@jameshutch86]

Halfords exhaust rubbers are bang on stiff as and cheap as fuck

[@VideosbyJosh]

Hi Steve what size was the smaller exhaust gasket?

[@LemonGamingHD]

Recip saw rather than a grinder!

[@MustangWill96]

Thanks Steve, sounds great 👍

[@Thejoker-zg1gk]

Awesome video man top work 👍🏻

[@paulking6349]

I have a st180 fiesta 13 plate how much for miltek cat back ?

[@fordyford]

Nice work on the discount code for my latest order 👊. Milltek are around $1200AU here. Not looked into your discount on those yet.

[@Sparkplugsteve]

Thanks Liam.

[@snakeeyes7763]

Combined with an itg intake and you get the full Darth Vader effect!

[@MANweldingservices]

Halfords black Ford exhaust rubbers are nice and hard I have two fitted to the back box on mine

[@Sparkplugsteve]

I used them on mine but they started perishing pretty quick

[@nickcarr917]

do you like it black and hard up the back box 🤣

[@simonlowe4013]

Sounds loads better that pal, you can’t beat Miltek 👊🏻👊🏻

[@nandoevan661]

SPS, can you post the part number of the Ford KA spring isolators you used? Thank you

[@Sparkplugsteve]

I don't know them sorry as William just turned up with them.

[@nandoevan661]

@@Sparkplugsteve , pls ask William to pass on the details. Those look a great alternative to the Powerflex isolators.

[@MustangWill96]

@@nandoevan661 Hello, this is the eBay listing for the ones I bought: www.ebay.co.uk/itm/Genuine-Ford-Figo-KA-Fiesta-Mk7-Rear-Upper-Suspension-Spring-Ant-Squeak-1531725-/273381834334?_trksid=p2349624.m46890.l49286

[@nandoevan661]

@@MustangWill96 , got it. 11:38 isolators are Ford 1531725. Engineering Part Number: 8V515599AA. US CN1Z-5586-A . OR Mazda 2 isolators. Part D651-28-012 or DL33-28-012. Will check them out. Thank you for the heads up :)

[@Areo7900]

The Teamsps code doesn’t work on the pumaspeed website. Miltek exhaust still showing over £500

[@Sparkplugsteve]

Did you put TEAMSPS in their search bar?

[@Areo7900]

@@Sparkplugsteve I put Teamsps like you spelt it in the video 😂 working now. Love the videos 👍😎

[@Showing_the_car_]

Great video, thanks Steve.

[@darkwaterblue]

Having spent some time recently under a car with a grinder they bloody terrify me!

[@hearthjunkie8173]

Do you think they could do some deals on the mk8 as well Steve?

[@Sparkplugsteve]

I can sure ask

[@Sparkplugsteve]

OK so iv had a reply and they said yes they will make deals on the mk8 in the next few days. So check back and let me know what you think. Thanks.

[@hearthjunkie8173]

@@Sparkplugsteve many thanks Steve

[@rabbiebhoy]

why isn't the fiesta st fully independent rear suspension?

[@Sparkplugsteve]

Most likely saving money

[@rabbiebhoy]

@@Sparkplugsteve Even a base focus of the same age has independent suspension, an oversight by ford.

[@pug306boyracer1]

Be careful with the welds, I've had 3 miltek systems and all failed at the welding

[@Vanilliayeti]

Where did u buy the exhaust gasket and what size is it

[@Sparkplugsteve]

I think will got it off ebay. 2.5 inch

[@purplechris635]

Anyone know where I can get this fitted ? I’m in South Wales but I can’t find anyone around here.

[@Sparkplugsteve]

Bd performance aberdare

[@purplechris635]

Nice one Steve I’ve booked in for Tuesday

[@Sparkplugsteve]

Tell James I sent you 🙂

[@avocado71]

Classic grinding wheel mishap! The pipe cut closed on the blade.

[@tompascoe5016]

Another great video Steve, Would you recommend this for a residential area with very strict neighbours? I miss having noise but also don't want sugar in the fuel tank! Cheers.

[@Sparkplugsteve]

Yeh absolutely of your on a standard cat. Just don't decat

[@ConnorPritchard__1999]

"Like a glove" 😂 top video

[@boostboyfabrications4499]

Nice vid steve , hate milltek though they are cheap mig welded bagoshit. I cant believe so many people like them . Theres on my door step aswell lol. Enhanced performance all the way for me fantastic fabrication and sound amazing

[@markward8691]

Talk him in to a sports cat wanna see that video but with a sub frame in the way this time #like a glove

[@Sparkplugsteve]

I don't fancy that job haha

[@TraceylouiseHarris]

awesome

[@gishg3833]

@12:54 mmmm dog shit.😆😆

[@gavynpope6190]

Miltec too quiet

[@mickducati1947]

😜👍

[@dubzuk3710]

U think thats cheap jeez what u do for a living? Lol

[@Sparkplugsteve]

Gold miner 😁