IS THIS THE ULTIMATE BATHROOM TANKING SOLUTION??.... How To install BW1 in a BATHROOM

Ultimate Bathroom tanking and sealing is a major part of a bathroom renovation and wetroom installation so it has to be the best, CT1 have come up with BW1...The Ultimate Tanking Solution. Take a look at just how easy and fast it is to install and how to apply it to your bathroom.
#bathroom #renovation #howto
Massive Thankyou to my channel sponsor UNILITE….
To save 25% on all Unilite orders type “MJTIFF” at checkout
unilite.co.uk/
Also check out the Trade Legends KZbin channel-
/ tradelegends
And head to the Trade Legends site for some massive discounts
tradelegends.uk/
Also I’m now proud to say I’m working along side “BigBoots”…. A family run workwear company from the UK…. So if your after some boots/work wear etc tv… go check them out👍🏼👍🏼….
And use my code “MJTIFF” for 10% off all purchases
www.bigboots.c...

[@MJTiffPlumbing]

Let me know what you think to this Tanking System…. 👍🏼👍🏼

[@CommercialGasEngineerVideos]

I'm taking more tips on the vid quality details. Etc. Haven't got a clue about tanking term

[@brianhewitt8618]

only time will tell

[@SuperWayneyb]

Looks like a great product 🤘😎🤘

[@anthonym135i3]

Hi mate, been watching your videos for a while. Used to work in this industry now done a complete U turn and work elsewhere but have a few years under my belt for plumbing and heating. Bought my first property 2 years ago, I reconfigured the downstairs bathroom to incorporate a shower and redone the bathroom upstairs. I used hardie backer on floor and walls, scrim tape and sealed joints. I then used the mapei shower proofing kit and taped the joints again and plastered two coats of the aqua proofing paint in the shower and bath area. Bit overkill but didnt fancy any leaks. Very similar to the stuff you’ve put on and I rate it. Funnily enough, when I used to do plumbing/heating when we did bathrooms never done any of the tanking unless it was a wetroom. Any bathroom I do in the future will always be tanked, its just not worth the risk. Great video as always 👍🏻

[@thomascoyne157]

Just setting my up done all the walls and two bumps outs and used Thermopanels . Just wired up the digital panel with 10 mm T/E cable , that bw1 would have been handy to have I’m got some Tanking membrane in the corners , looks nice and easy, good luck with the show and have fun 👍👍👍👍👍

[@MJTiffPlumbing]

Would have been perfect mate…. Try it next time 👍🏼👍🏼

[@andyroberts9562]

Tanking kit looks great and a nice bathroom too great stuff

[@MJTiffPlumbing]

Thanks mate

[@glyndavies591]

Looks like the perfect solution to seal a shower bathroom looks great

[@MJTiffPlumbing]

So quick and works perfectly👌🏼👌🏼

[@tonytasker489]

Looks a spot on product, will look out for that the next time I'm doing out a bathroom. 👍

[@MJTiffPlumbing]

Give it a try mate, it’s spot on

[@keithcampbell7214]

Looks like a great bit of kit especially for a non specialist user. It would be good to see how competitive the price is. Great video again Mark.

[@MJTiffPlumbing]

What would you be paying for the other product??

[@aaronlawrence5346]

Looks like a good product! Video was definitely worth the 2 week wait

[@MJTiffPlumbing]

Thanks mate

[@johndevlin980]

Looks easy to use, nice job that 👍

[@garyredfern5303]

Love that tanking kit. Will definitely be using that. I can't make the installer show this year. Too busy. Have a blast 👍👍

[@MJTiffPlumbing]

That’s a shame mate, always good to catch up… Yer the BW1 is a great product

[@bryanporter3025]

Looking good Mark well done and Bish works spot on well lads 👍

[@MJTiffPlumbing]

Thanks mate👌🏼👍🏼👍🏼

[@riptiz]

If it’s as good as CT1 it will be a brilliant product.

[@MJTiffPlumbing]

Ive used it a few times and its very very good👌🏼👌🏼

[@Apexplumber]

Money printer goes brrrrrrrrrrr. Best tanking system in the world

[@MJTiffPlumbing]

Is it cold

[@s.wilson5675]

Did you make your belt out of masking tape Mark? A revisit in a year or 2 to this bathroom would be good to check the tanking kit is still doing its job. Great video. 👍

[@MJTiffPlumbing]

Hahahaah well observed🤣🤣

[@chrisholt2474]

Hi Mark, yes I do like the tanking kit, was that just applied directly onto the new plaster? I have always been a big CT1 and BT1 fan, I’ve used loads of it. It appears to go on very well with the brush and roller, then I presume you can tile directly on top of it? If I have understood it correctly, it sounds great and I look forward to using it in the future. Another great film thank you, as always have a great week and take care, regards Chris. 👍👍👍

[@MJTiffPlumbing]

Yep Chris…. No prep needed, just swap it straight on….. goes off like a rubber membrane👌🏼👌🏼

[@johnwaby4321]

It looks ok ..did you cut in again with the brush on the second coat.👍👍

[@MJTiffPlumbing]

Just rollered it mate 👍🏼👍🏼

[@g.johnson3119]

Hello Mark Whats it like filling small cracks or gaps? does it slump? I am used to a certain product which is mixed to your chosen viscosity. 👍

[@MJTiffPlumbing]

This is perfect for fillling gaps mate, the coverage is brilliant

[@mrharry8466]

I guess you could just use hardy backer all over the bathroom and just tank the shower area with BW1. Do you need elements board if your using that product ?

[@MJTiffPlumbing]

BW1 will go on anything mate….👌🏼👌🏼

[@ashleymapes3926]

Waterproof head now mark 😂

[@MJTiffPlumbing]

Had to get it off quick🤣🤣

[@jamescochrane2744]

The lack of need for a primer is good, but why no skirt like the competitor products and how will it compare on price?

[@MJTiffPlumbing]

No need to skirt or trim as it goes like a rubber membrane once set…. The time it saves is great

[@tonupturner]

Is this as good as a Wedi tile backer board system? Moisture boards & this kit are significantly cheaper!

[@MJTiffPlumbing]

Yep, it’s the perfect solution imho

[@billysalter8734]

I used a different one I thought it was a really good stuff

[@MJTiffPlumbing]

Now try this one from CT1……. Nothing like this on the market 👌🏼

[@viewer.86]

Hows it any different to the tanking systems used over the last 15 yrs?? The CT1 marketing team are on it!

[@MJTiffPlumbing]

Complete rubber membrane and the CT1 reassurance

[@viewer.86]

@MJTiffPlumbing not trying to bait but doesn't sound like much difference. Ct1 products are great but the price difference isn't justified. It's all marketing. The ingredients are the same as lower priced competitors on most of their products.

[@mattundercoat]

It's what all the fashionable plumbers are wearing this season! Is it one of those products that stinks the place out for a month or is it fairly benign?

[@MJTiffPlumbing]

No smell to it at all….. 👌🏼👌🏼

[@georgebestbelfast]

Will the bw1 move with the tray when the timber under the tray starts to expand and contract with the moisture ?

[@MJTiffPlumbing]

Yep, this turns to a rubber type membrane when it’s gone off, so even if the walls move and the tiles crack it will stay sealed👌🏼

[@georgebestbelfast]

That would be revolutionary. I would have a tendency to still use a classi seal as we have always used them. Does the product state the amount of movement it will tolerate?

[@MJTiffPlumbing]

It is revolutionary….. honestly it’s a game changer… Will easily tolerate 10/20mm of movement

[@G1BB0]

🤔Are you using that blue masking tape to hold your trousers up 😉🤭

[@MJTiffPlumbing]

A few people said that🤣🤣👌🏼

[@lewib8526]

Hey Mark, do you know when the tanking kit will be available to buy?

[@MJTiffPlumbing]

Being released later this month 👍🏼👌🏼👌🏼

[@mathewwarnock3942]

​@@MJTiffPlumbingany idea when it is coming out?

[@deanmiles8421]

I know this is demonstrating the product but do you normally go that high? I only ever go a foot above the valve as it's a waste and not needed, especially given the cost.

[@MJTiffPlumbing]

I always cover the whole area to be 100% sure it’s all sealed mate…. It’s cheaper than any issues😉👍🏼👍🏼

[@deanmiles8421]

@@MJTiffPlumbing 🤣 you can't get an issue where there is no water

[@MJTiffPlumbing]

I think everyone who does bathrooms/wetrooms tanks the complete area…. Why wouldn’t you🤷🏼‍♂️ If you haven’t priced in enough to cover it all then take a look at your pricing😉😝 Each to their own…. I tank everything in a “wet area”

[@deanmiles8421]

@MJTiffPlumbing save money, that shit is expensive. Come now Mr Tiff you like me have ripped out bathrooms, you know where the board rots. And besides tiles and grout are pretty resistant to water 😃

[@denty32]

@@deanmiles8421I always tank the whole shower area, never go back

[@CommercialGasEngineerVideos]

It's that time again. 6pm, Sunday, let's go.

[@MJTiffPlumbing]

Indeed it is……. Although I think a lot of people will be out enjoying the sunshine

[@CommercialGasEngineerVideos]

I don't fully understand. Apologies I focus more on the production quality than the work. Thumbnail. Giveways. Intro. Camera quality. Pop ups. End of vid. How quick scene changes. Sound quality. Editing.

[@MJTiffPlumbing]

I mean the video might not hit aswell for a few hours as the weather is good…. That’s the sort of thing you have to consider when putting a video out, it can be very seasonal

[@CommercialGasEngineerVideos]

@@MJTiffPlumbing Sunday is a strong day. I am taking your advice and posting at the same time.

[@MJTiffPlumbing]

It’s THE day for content to go out…..

[@accesszero4803]

Tops tiles has been selling this kinda product for years , suprisenly the same colour 🤔

[@MJTiffPlumbing]

Not quite the same….😉

[@keithspencer5368]

How much does it cost to?

[@MJTiffPlumbing]

It’s going to be around £120

[@5084204]

If it would be grey, I would say its Mapei Mapegum WPS.

[@MJTiffPlumbing]

It’s not…. It’s CT1’s own product👍🏼

[@5084204]

@@MJTiffPlumbing so it's all down to the price then. Looks good.

[@MJTiffPlumbing]

What would you pay???…… considering the time your going to save

[@5084204]

@@MJTiffPlumbing mapei is about £50 per bathroom, but the main cost is in all rubber corners fabrics.

[@56ty78ui]

Hardly fast is it? Are you adding the time to apply, go off and 2nd coat to the price?

[@MJTiffPlumbing]

What…. 3 hours in total…. Pretty fast to me mate, a lot quicker than a few hours prepping the walls, few hours taping up then 3 hours applying 2 coats…. So basically halving the time…… 👍🏼

[@SuperWayneyb]

🤘😎🤘🫖☕️🍪🎥👍👍

[@MJTiffPlumbing]

Evening fella…. Ready for the week ahead👍🏼

[@SuperWayneyb]

@@MJTiffPlumbing sure am Buddy heading down there tomorrow till Thursday 🤘😎🤘

[@MJTiffPlumbing]

Yep I’m heading over tomorrow 👍🏼👍🏼

[@SuperWayneyb]

@@MJTiffPlumbing 🤘😎🤘🫖☕️🍪

[@jamesmayer4049]

More like real world sponsorships

[@MJTiffPlumbing]

You are correct, that’s why it says “paid promotion” mate…🤣👍🏼….. I work with CT1 however I only work with them as there products are so good that’s why I’m promotion this BW1 Tanking system… Not quite sure what you’re getting at…