Is This Worth Buying; Harbor Fright Bauer 6 In. Bench Grinder With LED Lights Review and Use?

The BAUER™ 6 in. Bench Grinder is designed for heavy-duty performance. The 2.1 Amp, 1/3 HP motor provides reliable operation that won't bog down. Equipped with ultra-bright LED lights illuminating your workspace and dual spark shields to protect against debris.
Contact Information: [e-mail]
Hi, my name is Paul, and I'm a tool addict. It's been three days since I gave in to my tool addiction. I was doing good until my tool dealer tempted me with a great tool deal I couldn't refuse. This dealer put the Tool I wanted on sale. I tried to resist, but I gave in to temptation. This KZbin channel reviews hand and power tools in a funny way for those affected by tool addiction.
Tool addiction is my problem. Tool addiction Is characterized by buying tools for no reason. A tool addict will also buy a hand or power tool to complete a project before a project even exists.
My addiction started when I was ten. My dad was a mechanic but refused to share his tools with me. My dad had a good idea of how to solve this situation. He started to buy me cheap hand tools on holidays. And that's when my tool addiction began.
"If that sounds good, make sure to subscribe to my channel right now."
Thanks for watching!
I truly appreciate each and every view we get on our videos. Your support and comments are truly amazing. You guys that are subscribed are fantastic; thanks for giving us your time to watch the videos.
If you aren’t subscribed to my channel, please subscribe; it doesn’t cost you a single dime!
-----I assume no liability for property damage or injury incurred as a result of any of the information contained in this video.
I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself. -----
How to Install | Change | Remove, TEKTON #Amazon, Milwaukee Electric Tools M12 Fuel 1/4" Hex Impact Driver, Metal Magery Sheet Metal Skin Wedge Pry Bar Tool Door Panel and Trim Removal Tool, GEARWRENCH Panel Clip Pliers - 3705, Katzco Magnetic Mini Tray Holders, tool review, best cordless, best electric, portable table saw, best cordless, air compressor, best hand tool, best ratchet, best socket, best wrench, best power tool, #HarborFreight #HarborFreightToolBox#HarborFreightOrganazation#HarborFreightInside Track Club #ToolBoxOrganization#HarborFreightSale#HarborFreightDeals#HarborFreightDiscounts#HarborFreightLowestPrice#HarborFreightCoupons#HarborFreightMembers-OnlyDeals#HarborFreightIconLine, Ultimate Toolbox Organization and Setup! - Harbor Freight (U.S. General) 44” Top Box, Mayhew Select 60003 CatsPaw 4-Piece Mini Hook & Pick Set, Mayhew 61366 Dominator Pry Bar Set, Curved, 5-Piece, Truck and Vehicle EDC: Tool Kits and Emergency Survival Gear, My Car Bag (EDD - Every Day Drive kit?), icon box, icon tools, HOW I BUILT MY TOOL SETUP | #toolstour #toolboxtalk, Truck and Vehicle EDC: Tool Kits and Emergency Survival Gear, #mactools #snapon, #snapon #cornwell #mactools, #mac, #vim, VIM mag rails, #milwaukeetool #mechanic #homedepot, fleet mechanic tool box tour #snapon #snapontools #toolboxtour #tools #toolbox #epiq, VIM Rails, Vim Tools VIMDU400S Duo Drive SAE Kit w/Free R400 - RATCHET Wrench, The Ultimate Toolbox Tour Organization and Review, Sunex, SOCKET ORGANIZERS and Everything About Them. Must-Have Tools, LEXIVON, Astro, #toolhaul, #milwaukeetools #toolreview #toolbox #toolboxtour #prostormer #Titan,

[@ljshowto]

I just picked up that same unit used for $30 but barely used and it looks great for occasional use. I just have to switch the right side to a wire wheel and I'm all set. Thanks for the review! Cheers!

[@JonesingForTools]

Thank you for your comment and channel support!

[@vitron01]

I gave you a like just because of your MAGA hat. Right on brother!!!

[@JonesingForTools]

Thank you Brother, I'll add a bumper sticker if you subscribe (lol)

[@JonesingForTools]

Thank you for your comment and channel support!

[@losmoore3358]

U did good. I'm thinking of buying one. I got some tools too sharpen like mower blades. Thank u.

[@JonesingForTools]

Thank you for your comment and channel support!

[@crusheverything4449]

Does the grinder come with a case of beer or did you buy it and drink the whole thing on the way home?

[@JonesingForTools]

{lol} Thank you for your comment!

[@rodrigo216]

Great video, I just bought the same grinder, Do you have a link for the wire brush or the name and model ny any chance? I bought one wire brush but didn't fit, it was too skinny

[@JonesingForTools]

I will look for a link for the wire brush and attach it to this message. Thank you for your comment and channel support!

[@JonesingForTools]

www.amazon.com/Grinding-Dresser-Pieces-Diamond-Deburring/dp/B07SJNKCNV/ref=sr_1_48_sspa?crid=33N0Y9X6YAQW4&keywords=Grinding+Wheel+Dresser&qid=1682855197&s=hi&sprefix=grinding+wheel+dresser%2Ctools%2C83&sr=1-48-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyRDNIQVk3R1RDSkxOJmVuY3J5cHRlZElkPUEwOTcxMzkyMkVaNkFOUE5STVhVMyZlbmNyeXB0ZWRBZElkPUEwNDkxMTE1WE1ZVVkzRUVKUkwwJndpZGdldE5hbWU9c3BfYnRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

[@AuctioneerElite]

The brackets that hold the guiding surface on mine are angled inwards? Is that how yours is? Or is this one assembled wrong???

[@AuctioneerElite]

Never mind. I took it back to harbor freight and exchanged for another. The grinder brackets were indeed bent and not supposed to be. New ones straight as an arrow. I hate when manufacturers just push defective products out the door and hope people just deal with it.

[@JonesingForTools]

Thank you for your comment and channel support!

[@JonesingForTools]

@@AuctioneerElite, I'm glad you have it all worked out!

[@AuctioneerElite]

@@JonesingForTools you bet!😊

[@AuctioneerElite]

@@JonesingForTools me too. I’m glad Harbor Freight was able to give a no cost exchange. 🙌🏻

[@Joe_Yacketori]

Just bought one of these. Is it just me, or is it impossible to adjust the work rest to anything other than zero degrees? I'm trying to grind a 25 degree bevel in my chisels and plane iron, so the rest needs to be 65 degrees from horizontal, but it seems that it only wants to sit flat. How do you go about setting a bevel angle on this?

[@JonesingForTools]

I have mine at zero like you; I don't think you can change it with that model. Thank you for your comment and channel support!

[@lar4305]

Trump hat, ma man👍

[@JonesingForTools]

"Trump 2024" Thank you for your comment and channel support!

[@joemoss8106]

What size bolts did you use to mount the grinder? Thanks.

[@JonesingForTools]

I'm not sure; I used bolts from an old toolbox filled with used nuts and bolts. As long as they fit threw the hole and there long enough to go threw the table you're using should work.

[@joemoss8106]

@@JonesingForTools thank you !

[@crusheverything4449]

I almost through up over they’re.

[@travisskyski]

are you drunk?? 😂😂😂

[@JonesingForTools]

Thank you for your comment!

[@fjmurray25]

Lol you think 😅

[@JonesingForTools]

@@fjmurray25 Thank you for your comment!

[@davidquirozelojo]

I need help changing the wheel.

[@JonesingForTools]

Why is this a problem, Brother? Thank you for your comment and channel support!

[@davidquirozelojo]

Took it back. It was defective.

[@JonesingForTools]

@@davidquirozelojo Very cool!

[@ricksears9404]

This cat drunk

[@JonesingForTools]

Thank you for your comment and channel support!

[@AngusKhan878]

Waste of time.

[@JonesingForTools]

Thank you, Brother, for the kind words and support!

[@AngusKhan878]

@@JonesingForTools You are welcome. Love puddles.

[@ericerf6837]

Subscribed. Saw Red Traitor Hat. Unsubscribed as fast as possible.

[@JonesingForTools]

We can agree to disagree. Thank you for your comment and past channel support!

[@charlessmith4242]

* You didn't do any subscribing or unsubscribing. To do either takes more brain power than you're capable of generating.

[@ericerf6837]

@@charlessmith4242 perhaps, so I’d better save up for November to help remove what I consider a threat to every man and woman who have given their lives so we could maintain the American way of life so precious. That some can’t see a man only out for himself is telling as to the moral and ethical void of so many of his supporters.

[@JonesingForTools]

@@charlessmith4242 Thank you for your comment and channel support!

[@MoparGuy1625]

What wire wheel did you get? I got one from HF and it doesn’t fit. It’s too loose and the wire wheel hits the side of the guard.

[@JonesingForTools]

All of my wheels came from HF. Thank you for your comment and channel support!

[@MoparGuy1625]

@@JonesingForTools mine doesn’t fit at all

[@JonesingForTools]

@@MoparGuy1625 Take it back to HF and exchange it.