Is Value More Important Than Legacy?

#survival #bushcraft #camping #edc
MAXLEVELEDC CHANNEL
youtube.com/@maxlvledc?si=eNR...
_________________
CLONE MULTITOOL LINKS
BIBURY 19 in 1 Multitool** amzn.to/3Too3tb
ROCKTOL 19 in 1 Multitool** amzn.to/4cmYgdK
LEATHERMAN WAVE** amzn.to/490rSut
_________________
NEW ARRIVALS
Amazon** www.amazon.com/shop/gideonsta...
DLT Trading** www.dlttrading.com?ref=29
Bladehq** shrsl.com/1hs3c
Gpknives** shrsl.com/1mf0b
Smoky Mountain Knife Works**
www.pjtra.com/t/TUJGR0dMRUJGT...
__________________
Gideonstactical Gear Link Hub:
solo.to/gideonstactical
__________________
LA POLICE GEAR LINK
la-police-gear.pxf.io/DV0b6d
10% Off Your Purchase With Code GTTAC10
_______________
BACKCOUNTRY.COM LINK
alnk.to/gVGQLbW
________________
MOOSEJAW LINK
alnk.to/4Xu7Rm9
___________________
5.11 TACTICAL LINK
511.pxf.io/e4MKDO
________________
MONTANA KNIFE COMPANY LINK
alnk.to/4BEBTMj
________________
GRAYL Water Purifier LINK
alnk.to/dpqvGkY
_______________
SPORTSMANS WAREHOUSE LINK
alnk.to/8iPIHhA
________________
MYSTERY RANCH STORE LINK
alnk.to/60VRWIw
________________
KELTY GEAR STORE LINK
alnk.to/faxgXac
________________
HLTH CODE Meal Replacement Shakes: bit.ly/2PVUUbR
Get 15% Off With Promo Code: EATWITHGT
Paypal Link: www.paypal.com/us/home
Paypal Username: [e-mail]
Links Provided May Include Commissions For Me As A Content Creator. It Is Free For You And Helps Me Create More Content.
DO NOT ATTEMPT ANYTHING SEEN IN THIS VIDEO AT HOME. YOU TAKE ALL RESPONSIBILITY AND RISKS WHEN USING, HANDLING, OR ARE OTHERWISE ENGAGED WITH ANY OF THE ITEMS, SCENARIOS, OR TOPICS MENTIONED IN THIS VIDEO.
/ gideonstactical
/ gideonstactical300
/ gideonstactical
00:00 Attack Of The Clones
00:33 Why A Clone
03:55 Bits
06:04 Other Tools
10:00 Pliers
13:37 Is It Worth It?
HGPB6B0Z3OJT1T8O
WYTY5CU7HC3KCBOR

[@gideonstactical]

CLONE MULTITOOL LINKS BIBURY 19 in 1 Multitool** amzn.to/3Too3tb ROCKTOL 19 in 1 Multitool** amzn.to/4cmYgdK LEATHERMAN WAVE** amzn.to/490rSut

[@canadiantinman329]

I have Leatherman tools, and have clones including the bilbury, it's on my belt more then Leatherman, cost is right

[@user-oj7rr2tm8s]

What the heck do mean $25.00, they're $39.99 from the link you provided man

[@dallasn16]

A leatheman wave in 2014 cost $60. Adjusted for inflation that should be around $80 but instead its $120. That's a lot of money for a tool not made in the U.S. These price increases are getting insane.

[@Man_Cave]

Leatherman isn't obsolete, they're just pricing themselves out of the market.

[@nandayane]

I don’t really think there is a way to them to compete with Chinese clones on price. I think leatherman has to innovate

[@Stucknthe80z]

The clones are great but they have a tendency to fall apart rather quickly with day to day use.

[@edgaraquino2324]

Agreed...they want their tools to be the equivalent of Rolex in the watch world while ignoring their base who got them where they are...

[@realbuffstuff]

Leatherman is the Benchmade of multi tools… way overpriced.

[@mattkandel2449]

​@realbuffstuff - Yeah, for the poor tolerances on the tools they're definitely overpriced. I suppose you're paying for the warranty?

[@g.dilla.]

Just a reminder that Leatherman really stretches that “American Made” label to its limits. It may be that some of the clone parts are made in the same factory as Leatherman parts. Just an FYI.

[@gideonstactical]

I think some of the Leatherman parts are from Taiwan, I don’t think anything is from China but don’t quote me on that.

[@RICH21716]

I've already switched... Bibury 19in1 is my EDC... love the 1/4" bit holder!

[@gideonstactical]

That feature is nice!

[@jorgegarcia-wy2gd]

I think for $25 you can throw one Bibury in the car,have one at home,keep one in your bag,edc another one on your belt and you have another $25 left in case you got to replace any of them,if you compare it to the $125 Leatherman. It's a no brainer for me...

[@gideonstactical]

I agree for casual use situations it would be good!

[@maxlvledc]

From what I can tell the straight blade in all of these are 7cr17mov. In order to use standard hex bits you need a 6mm x1 mm magnet. Also Klien makes a whole series of screwdrivers and bits that work with no modification. Awesome Video!

[@gideonstactical]

Thanks for the info always appreciate it Dominic you’re the man

[@MarineX]

Extremely interesting. Has me considering putting one in my wife's vehicle. Just as a catchall.@@gideonstactical

[@maxlvledc]

@@MarineX try the surge clone..it's amazing

[@JesseJamesGill]

Sooooo glad you left that sesame street martians reference in there! Haha! Had a blast testing these tools with you! Looks like a lot of folks resonate with these as well!

[@johanesgo8096]

a few years ago I took a Chinese copy of Wave, it had several flaws: the multitool didn't work well out of the box(I had to adjust it), the finish was not good and the blade was too soft. I did all the worst jobs with that multitool that I wouldn't have dared with my Latherman, and to this day that multitool still works. This made me buy a copy of the latherman Surge (diaclamping DL30) a couple of months ago, all the flaws and complaints I had with the first multitool were corrected and I am very satisfied and I recommend everyone to try this multitool!

[@bobinmontana777]

As your brother in law said he, “didn’t buy a Leatherman because of how expensive they are.” Leatherman was reasonably priced when they first hit the market. I wouldn’t own a Chinese multitool. I have a preference toward Leatherman and own several, but I won’t buy another because I think they’re way overpriced. The Arc is a prime example. Innovation led the way, greed got in the way.

[@edgaraquino2324]

Agreed...another factor is L's QC...sad to purchase a tool & finding you need to send it back to fix it...

[@Laurarium]

3cr13 is 420 7cr17 is 440A

[@richardvirchow3390]

In 2012 I bought a Leatherman Wingman multitool from Amazon. Today the price for the same multitool is three times (3X) what I paid. If I had to replace my Wingman I wouldn’t buy a Leatherman.

[@DamionJR4923]

I have 3 Leatherman Waves and 3 Charges. I bought 2 of the charges for $60 a piece. They were a discontinued color way(154cm blade). I know they aren’t cheap but they just work. I keep one in every car and 72 hour bag.

[@medic58]

Still sticking with my Gerber’s . Thanks for the review. God bless!

[@gideonstactical]

Right on

[@airiksknifereviews9548]

The ROXON Flex That We All Juggle Knives channel reviewed will change the world. That is the multitool that has finally brought me over to the multitool world. Option to change out every tool and switch them around for your taste is awesome !! Amd it's gonna be a great price , coming soon .

[@gideonstactical]

I will look into that!

[@greggvarnadore6012]

I agree the Roxon Flex is way cheaper than the Goat tool and will definitely be a game changer for sure.

[@mmccoyster]

Yep, I have the Roxon and it's great. I've been caring it for 2 months now and use it every day. Great tool set, sharp knife and the best scissors.

[@mattvanderwalt6220]

I wouldn't call these knock offs. Even if they appear quite similar. I had one of the first generation Waves and was looking to replace it. But found that Leatherman had changed enough features for their offerings to be less appealing or useful to me, and factoring in the cost. Ended up getting a similar Surge inspired tool, its really great, and it suits my needs better. For me Leatherman isn't listening to the wants of their consumers in relation to the toolsets they provide, unless its puerly profit driven, which is kinda annoying. Also their costs outside the US is a large chunk more, usually about 40%, making other options in the high end, like Victorinox, more attractive.

[@gareth-ff9ok]

I have a swiss tech wave clone i lost my wave but leatherman are now at the price point its ridiculous i couldnt justify spending the money. For everything people say abour the quality and Leatherman will last a life time i am in the military and absolutely beat the shit out of the swiss tech for over a year amd it has held up just as good as a Leatherman. I still have a Supertool 300 and squirt and love them but I'll never buy Leatherman again

[@greggvarnadore6012]

The patent's are up on the Wave, Surge, and Charge. I got a Bibury Surge clone for $34 and for the value and quality you can't beat it compared to $150 for a Surge.

[@danjones7]

But what about the fact that you’re supporting an American company and workers/designers when you’re buying leatherman??

[@greggvarnadore6012]

@@danjones7 Well I bought it from Amazon and it shipped from a local Amazon warehouse so I was supporting an American company and American employees while buying a Chinese product, like is the case with most consumer goods in the states.

[@stefthorman8548]

​@@danjones7 for 5x the price, it has to be 5x the value

[@danrussell9357]

I have gifted several of these multi-tools to guys who keep them in their cars. They are reliable enough to work when people need them away from home but cheap enough to have an extra in the glovebox.

[@gideonstactical]

Totally!

[@thomasmusso1147]

👍👍👍 15-odd years back my daughter bought me a 'cheap' Leatherman knockoff for my birthday .. based on the original. As a then-student, it was expensive for her. It sits in my bedroom 'man drawer' .. close by and I use it regularly. It has assembled much 'flat pack' office furniture and performed many other 'odd job' tasks around the home. It still assembles, cuts stuff and saws wood. The only modification that I have made, is reinforcing the nylon tool pouch which in my opinion, was a bit flimsy. Leatherman:"What price is the Market prepared to Tolerate?" .. "OK, go for it."

[@HouseofYee88]

Hey Aaron, got a video suggestion for you, but first this. I owned an original Leatherman Surge (the one with the microscrewdriver) and I loved it. Carried it with me everyday. Then I lost it. I wanted to replace it, but they jacked the prices so high I opted to carry SAKs instead, which are still great. I wandered into Walmart and found the Ozark Trail Multiforce, and it's held up pretty well, Imo. It even comes with a bit extender and a decent pouch. Also, the main tools are reversed, reducing a pinching hazard when using the pliers. My request to you is to put the above two and the Multiforce through the same paces as you would a Leatherman in a real bugout situation. Many believe the Leatherman would do the best, but it would be enlightening to see how close these clones get. Thanks, keep up the great reviews...

[@gideonstactical]

Good idea! 👍

[@frank4fun64]

Nice review ! I grabbed a bibury months ago on Dominic's recommendation and am not disappointed. Concerning the Rocktol, I believe the notch on the pliers cutting edge can also be used as a wire stripper.

[@RichardPoogerman]

I have one of every type and brand of multi-tool and appreciate them all. But frankly my favorite multi-tool of late is the Milwaukee 6 in 1 fastback. Cutting stuff up and driving screws is pretty much 90% of the stuff I want a multi-tool for. Shout out goes to the Leatherman crunch because the locking pliers on that have saved my ass so many times.

[@edgaraquino2324]

Agreed... & the LTG discontinued the Crunch...go figure...

[@thebiologist8662]

I have a simple philosophy when it comes to buying most stuff (with some exceptions). For something to cost 10 times more, it has to be 10 times better or last 10 times longer, or a mix of the two. If I have to pay 100$ for a multitool or get 4 multitools for 25$ each, that 100$ tool better be damn good, otherwise I'm gonna get 4 of the cheaper ones. I got one of those cheap Chinese multitool for 17€. I'm still using it 5 years later. (also, leatherman is even more expensive here in the EU)

[@urbanjungle9600]

I love my Surge and Rebar and Raptor shears and will next be getting a Charge Ti. Yes they are expensive, but just like a Patek Philippe you are merely the custodian looking after it until you hand it over to the next generation!

[@edwardgreen5880]

I have the Ozark Trail Multiforce because of the warranty.. I bought a Klein 11-1 screwdriver and some Torx replacement bits. I'm very pleased with it.l

[@gideonstactical]

Nice!

[@The45satisfaction]

It’s all about what you’re into. If brand doesn’t matter and you don’t use it much… go with the knock offs. I like carrying and using my gear so I feel having something better quality is worth the price. I recently bought a letaherman p4 and a super tool 300m but keep looking what one to get next 😂 thanks for the review. I’d like to hear what your favorite letaherman is and why !

[@kvernesdotten]

I have a feeling that most of the customers for these knockoffs are going to be people who already own at least 1 leatherman. Im one of them, I have my leatherman that I take with me, and a couple of these knockoffs spesifically to leave in the car, under the seat of a motorcycle, in a toolkit etc. And with the 25 year warranty, its not like existing LM customers really need to buy new ones very often either. Some do, but I think thats mostly out of wants, not needs, and those guys will absolutely not settle for anything else. I think their patent on the wave/surge platform expiring will make a noticable difference to them, but I dont think its going to affect them as much as we seem to think.

[@dlrmon1]

The original Leatherman Wave plus is still my go to. The Surge is more job specific for me. I was gifted a Ozark Trail Multiforce 4-5 years ago and have been surprised at how good of a tool it is. I would think the better Chinese brands would make great backup or kit tools...

[@barrybueler3356]

I’ve bought 5 leathermans in my life loved them all gave 4 of them away to family as I upgraded can’t go Chinese clone even if they were close in quality though I doubt that’s the case.

[@Greenhead24]

I bought one for 14 bucks Canadian and i can say it has not let me down

[@jonathancupp3686]

I’m with you bro, I’m sticking with Leatherman.👍🏻

[@absolutez3r019]

these clones are getting pretty close in quality and durability. And they use standard 1/4 bits which is a huge step up. I love my Surge and Crunch, but if Leatherman doesn't change, they could become like snap-on and their customers will find less expensive options

[@emanuelroth7960]

Reading through the other comments, it's DISTURBING how many Americans/traitors have just given up and surrendered like spray cheese eating marxist surrender monkeys to communist china. Harsh,....but true.

[@keeperoftruth5951]

Clones are actually better in some cases.ozark trail multiforce 18 in 1 is better than the wave in everyway and is only $40

[@mtnmnkymilitia]

I didnt want to drop a magnet in the hole cuz i still wanted to use the supplied bits. I took a couple No.2s and glued the magnet on those instead

[@escapetherace1943]

I bought a wave+ under half price because it had a lazer engraving on it. Then I bought a like-new wave+ frame from another seller for around 10 bucks. Swapped the unmarked frame onto the tools and tossed the engraved one. 😂

[@WEREWOLFUSMC]

Everything was spot on Aaron! Cheap but not $10 clam shell garbage cheap that gets loose as a goose after one use! I myself only use a Supertool 300 cause it has never let me down! If anyone wants something damn close without the price tag, total winner! Great video! 😎👍

[@greekveteran2715]

Leatherman died for me, the day I tried the Victorinox Spirit X. Never going back to junk, I'm sorry, but that's how the Spirit X makes my Leaqthermans feel.

[@johngordon2929]

that is the same way WE knives took over the knife market. Leatherman priced themselves out of the market.

[@gideonstactical]

God is sad I love myself a Leatherman. But I know for a lot of people it’ll be hard to justify dropping $100 or more on a tool when they can get one that performs very similarly for a third the cost.

[@bdcochran01]

1. great presentation. 2. in accord with the evaluations. 3. over the years, I have been gifting out my leatherman models other than the wave. most of my relatives now have leartherman tools as a result or I would buy these less expensive alternatives as gifts.

[@Ajaxykins]

You nailed it on the head with your closing statements Car, bike, tacklebox, rucksack - bilbury Work/edc - leatherman, but I'd prefer the Arc However price is a big factor, even for work/edc bilbury is a close second because multitools are one of those items that get swiped on a regular basis

[@gareth-ff9ok]

Oh and you can buy one these just for the price of Leathermans bit kit

[@gideonstactical]

That is true!

[@chrisfarr9494]

They have gotten crazy expensive for what they are , brought one when the 1st model came out and 10yrs after that a second hand Mirca and thats IT , would never think of spending the money they want for them now , not remotely worth IT .

[@JR-gp2zk]

I got a $48 Roxtol knockoff of the $130 Leatherman Signal. The Roxtol is actually designed better.

[@gideonstactical]

Holy crap!

[@gregblake2764]

I own 4 Leatherman and 2 Gerbers. All of them bought on sale when newer models came out. I see them as backup tools that are easy to pocket carry when I don't know what I might be getting into. The one exception is the Leatherman Micra. It goes everywhere with me. The scissors are fantastic for trimming my nails, same for the file. The knife acts like a scalpel for fine detail and the bits have bailed me out countless times. As a backup tool, a Leatherman has saved my butt multiple times so I figure I owe them some loyalty.

[@gideonstactical]

Nice!!

[@karltria-tirona4784]

Have 4 leathermans. All have broken springs. Willing to try other stuff now without the proprietary bits

[@mrjoshua6979]

Can’t really beat the under $30 one now that leathermans pricing is outrageous and their quality has took a dive in the last decade as well. I agree if you’re not a tradesmen using it 20x a day and need the warranty. Save the money

[@frenchieedc7602]

I use a Leatherman Wave at work as a pro handyman. Only by watching this video i would go with the B/Bury over the Wave. The value for the money is insane !

[@podunkmissouri4999]

I'm hard on a multi tool with the kind of work I do. I have some tweeks on the wave plus. I don't know if a cheap knock off will hold up. Ive put a slight bend or twist on half the gadgets on it 😅

[@Ein_Westfale_im_Rheinland]

The bibury is a great Budget multitool i think. But i never had a leatherman

[@cranstonsnord4334]

I collect knives and multitools and I have a bunch of these Leatherman inspired tools! Most are like the Wave, but there are a few newer ones that are like the Surge, and I just got one that is similar to a Charge. I keep an Ozark Trail Multiforce on my belt every day at work. All of these tools are very good quality and great values for the dollar! None of the ones I own are a clone of the Leatherman's, but there are more similarities than differences! All offer something a little bit different, but I would not be surprised if they all came from the same factory. Is this the end for Leatherman? I do not think so even though they are not helping themselves with their pricing. These Chinese tools have not stopped me from buying Leathermans. A year or so I bought a Free P4, T2, T4, Wave+, an orange Charge, Free K2, and my first Juice! My next one will be a Free K4. I will not buy an Arc as I think they are overpriced, but who knows. I did not think the Free P4 was worth 150 but I bought one anyway! 😆

[@thomasmaloney843]

Fair review and analysis. For occasional use, they are okay.

[@LaurelisCroatorum]

I have Leatherman Super Tool 300 as well as copies of Leatherman Wawe and Surge Daicamping DL1 and DL30 and I can say that I am satisfied with their quality and the price of 40 € in a set with bits and spare teeth for cutting wire. Very close to the Letherman original

[@wyattshoulders1794]

I have a Gerber multitool and it's sitting in a drawer currently i just don't use it like i did before i actually now carry a Victorinox multi tool and it's lighter and i put it in my pocket and i honestly forgot about it a couple of times and it went through the washer i just figured multitools are nice just the price and the amount of times you actually end up really using it don't really justify it

[@gideonstactical]

I totally understand that!

[@ahoyt653]

Ok I’m only 39 seconds in, but I can almost guess with 100% accuracy, the clones will never beat Leatherman’s warranty. Hands down the best ever.

[@gideonstactical]

Yes! 30 days or 25 years

[@rcjoe406]

Well at least you found one thing better 😅😅😅😅😊

[@keepout7811]

@@rcjoe406origin of manufacture? Materials? Quality?

[@isildurelendurion1822]

Or quality.

[@absolutez3r019]

@@isildurelendurion1822 some of these brands are producing pretty high quality tools. And they're using similar quality steel. But the use of standard 1/4 bits is a huge selling point, I don't understand why Leatherman sticks to their flat bits

[@davidblowe9096]

1/4inch drive bit's is defiantly a winner BUT bulky to carry a "Bit Kit", I've had "other" multi tool's and in the environment I used them they rusted in no time when the Leatherman's didn't + a 25 year warrantee is hard to beat. Yes I agree that Leatherman are expensive but I've edc a Wave then a Surge virtually every day for 7 year's and there's no going back, I have a Gerber from 20 year's ago that live's in a fishing bag it's just not the quality I expected, I've heard good hands on reports about Victorinox but don't own the Leatherman equivalent from them. There are any number of cheap competitors on the marker and there has been for as long as I can remember but Leatherman are still here and are still setting the standard.

[@realUlfricStormcloak]

The deep well in the bit holder is no problem for me as I use a rotating bit extender. Back in the day, I even bought the leatherman bit extender with the little slot. 😬

[@The45satisfaction]

Thanks!

[@gideonstactical]

Really Appreciate it!!

[@Robin6512]

Happy that the leatherman warrenty is so good as I had 3 with damage..

[@gideonstactical]

Oh ya! Get those fixed 👍

[@CClampTheCan]

26 for one… well shit. Got 5 for less than a Leatherman😂 now when I lose them in a field I won’t feel so bad

[@zakkrueck2362]

the flissa multitool is also not bad. flissa also makes good knives, fixed and folders

[@gideonstactical]

I have a becker clone from them I am working on 👍

[@zakkrueck2362]

you may also want to look at what roxon multitool is doing as well as the walther gmt150 if you haven't seen these already. changing the game@@gideonstactical

[@Lovinstevens]

Whoop whoop!

[@charlessalmond7076]

My experience with clones. Microtech's are kinda pricey. Ive got a single edge Ultratech. I wanted a double edge. I was at a local gun store and saw what i thought at first was a Microtech, but, wasn't. Satin double edge blade, black handle. Steel is D-2. $140. I thought, what a bargin. ONE week. Thats how long it lasted. The mechanism simply fell apart. The old saying "buy once, cry once" is an old saying for a reason. I'll stick with my Leatherman, thank you.( i do regularly use mine at work)

[@Rob-cq9hq]

My main issue with the Leatherman is that I am paying premium pricing for crap steel. Sorry, but as a knife maker who pays attention to steel properties, the 420 series these are made out of is NOT worth the price Leatherman charges for them. They have a premium line that employs better steel but, frankly, the base models should be equipped with it for the ridiculous prices they are charging.

[@gideonstactical]

I agree, it was fine in the 1980s but now 154cm would be perfect on all their tools.

[@maxlvledc]

OOOHHH boy....here we go!

[@theimperialbeachbum1304]

These clones are literally giving Leatherman a run for their money with the $30ish price point clones vs $100ish of a similar model Leatherman….yeah I’ve picked up a few clones, and I own many premium Leatherman models like the Arc, Charge TTI, Crunch, Wave+, and the clones actually perform very well. The blades on the clones dont hold an edge even close to the Arc Magnacut or TTI s30v, but putting a good edge on the chinesium blades is super easy and if it breaks or gets lost I’ll just get another out of the drawer and keep on fixing. Great video!

[@gideonstactical]

Awesome!! Glad you are seeing good results

[@TacticalTinkerer]

I think the clones are great for occassional users and backups, but where I really think they shine is with kids. All my kids have one for their daily use, but they have a real one in their zombie bag.

[@gideonstactical]

That’s a very good idea!

[@ntstick06]

I got a Walmart Ozark Trail version that is identical to my Leatherman on clearance for 15 bucks

[@toddcarr.]

Once these clones start coming with better steel blades ( 14C28N, S35VN, S90V and up as example) and at much lower prices, Letterman is going to have serious problems . Right now they are getting by on the name, warranty, and slightly better quality but in time if they don't innovate they are going to be left in the dust. Same goes for Gerber USA made multi-tools. The switch to Magnacut could have been great, but they hamstrung themselves by not doing a proper heat treat on it and keeping it soft as rubber. Thanks for the great vid and keep making sharp things fun and enjoyable.

[@davidheath2427]

I think Gerber are all ready to far behind the competition.

[@johanesgo8096]

when I bought the Dl30 multitool ...a copy of the Latherman Surge I thought exactly this. a few years ago I bought a copy of Latherman Wave and it was not a multitool that I would recommend, although it still serves me today... I don't think I will ever buy a Latherman multitool again because it is sitting in my house and I carry a dl30 with me

[@johnmuthan286]

My wave from 1996 still serves me well and was using cheap steel

[@davidheath2427]

No I have to jump in . Love the wave . About the only multi tool I carry. Unless I have a hunting trip then I carry my mutt .

[@jdmDC2ftw]

I really like leatherman, but i dont like their prices. I have recently switched to these Chinese copies.

[@keepout7811]

Considering where it’s made, it’s materials, and its warranty Leatherman is certainly worth it. Knowing that it’ll be an heirloom for one of my grandchildren, it’s not even a question. These Chinese knockoffs couldn’t say the same.

[@Goss5079]

Fair warning, if you don’t see “USA Made” stamped into the plier head, it’s made with enough foreign produced parts (most likely Chinese) and then assembled in the US. They by law can’t state “American Made” unless a percentage threshold of its parts are truly produced in the US. Most recent models such as the Arc and Free series have this designation. That does not discount QC and warranty however.

[@stefthorman8548]

Lmao, did you buy the magnacut version? What do you mean better steel? 440 is so so steel for even 25bucks let alone 120bucks

[@keepout7811]

@@stefthorman8548 no I didn’t. They have S30V too.

[@ephiebernstein2979]

Aaron, what brand shirt are you wearing? Do you have a favorite flannel shirt? Thanks.

[@gideonstactical]

Thanks for asking, it’s an orvis I got at Costco! Kuhl also are my go to

[@ephiebernstein2979]

@@gideonstactical Thanks. Wow, I did not realize Costco carried any Orvis. I’ll have to check out Kuhl’s shirts. Keep up the fantastic content, you have been very helpful in guiding my purchases over the years.

[@tomritter493]

I had a wave broke knife never held an edge I have a sidekick now broke the knife breaking leg bones .

[@20alroco]

I would edc the Gerber\leatherman and have the clones in the emergency bags

[@fredperry9235]

I have a few knock offs. Just bought a leatherman and US made gerber. Sick of the copies which are average but not great.

[@Foskey83]

Swiss tool, FTW!

[@Robin6512]

Fun part: in Europe they cost dubbel they price you pay

[@stefthorman8548]

And they say euros are higher value then the dollar 😂

[@Robin6512]

@@stefthorman8548 🥴🤣

[@m.myrick7086]

In your review you state the price of the BIBURY 19 in 1 Multitool is $25.00 but the link provided takes you to Amazon where the price is $39.00. Where is this tool available for $25.00???

[@gideonstactical]

I found that video several weeks ago but if you look closer there is a 40% off promo code on the BB. Should bring it to right around $25.

[@urbanoutdoorsman]

There are several clones that uses D2 steel in their blades, so the argument of LM having better steels can't be insisted anymore.

[@gideonstactical]

Nice

[@marksaint2936]

The guys at Hangzou Great Star Industrial Co., Ltd approve of this review. Just kidding, anyway I have a few Leathermans and SOG. I also have the Mossy Oak 19 in 1 outdoor multitool. It works good but is not the tool quality of the Leatherman.

[@gideonstactical]

I need to try out that Mossey oak

[@Greenhead24]

I got a 14 dollar multi tool excatly like the leatherman and saved 150 dollars. Its so good I bought another one.

[@MJA5]

I get where you’re coming from and any tool can fail, the expensive and the inexpensive. But when the chips are down and you really need it, which is more likely to fail? That’s the difference in price.

[@MJA5]

before you even get started, the leatherman tools are very good quality

[@gideonstactical]

They definitely are!

[@emersonmsd]

I followed your lead once again and ordered a Bibury on Amazon. Here are 2 knives I own that I haven't seen you use. The APO 1T from survival Lilly and the Mikov UTON 007. A fix blade with a saw and file in the sheath.

[@Swearengen1980]

So many people (not referring to you, I don't know your opinions) complain about how everything breaks easily, no warranty, why America lost companies, jobs, etc., but yet are so quick to throw away their supposed virtue by exemplifying exactly why all those problems exist just to save a few bucks.

[@gideonstactical]

Oh, I always support USA manufacturing, but in a global market it is good to see what is out there and see what something can or can’t do. 👍

[@Swearengen1980]

@@gideonstactical Yeah I was targeting certain folks in the comments section that I've also seen on other channels. Constantly complain about overpriced American products while screaming "MURRRRICA" LOL. I mean, I'm one of those "merica first" rednecks, I'm just not cheap or broke.

[@dennisdamenace.8181]

I have two Leathermans and two Gerber multi-tools and I wouldn't trade either up for the world.

[@gideonstactical]

And I wouldn’t recommend that you do. But at under 50 bucks, these are very capable.

[@stefthorman8548]

I hope you wouldn't considering you paid an arm and an leg for them

[@Mossycreeksurvival]

When did knock offs become 'clones'?

[@dlrmon1]

"puh-TAY-toh”, "puh-TAH-toh”...

[@impuls60]

Nice vid! Love the regular Joe's perspective too.

[@gideonstactical]

Glad you enjoyed!

[@edcgearpocketknife]

I think Leatherman has the best warranty. But Leatherman should lower prices

[@mjdegrey4843]

I'm sorry guys, but I will always buy Leatherman or Victorinox . The bottom line is, the steel that these Chinese copies are made from is completely inferior. You cannot make a decent tool from poor quality steel.

[@thehairywoodsman5644]

I recently bought a Gerber multi tool from Home Depot on impulse for $40...it's a piece of excrement !

[@gideonstactical]

Man!

[@thehairywoodsman5644]

@@gideonstactical I think they made the pocket clip out of aluminums foil, I bent it getting it out of package...

[@ronnietarnacke5153]

So a great American company , Leatherman. Develop's an awesome tool that has stood the test of time . Eats the cost of research and development and inovations . Then these Chinese tools come along riding on the backs of all that , and makes damn near exact copies. With inferior steel , using slave labor and no warenty . Offer no pride in ownership. And y'all are gonna get on here and promote this as if it's a good thing . No thanks , bro .

[@The4cp]

Im the world's most unhandy man so I've never really gotten a multi-tool. Im the guy that thinks he fixed the sink in the bathroom and the lights downstairs turn on. Lol

[@Messer-Martin]

My Biburys are better than my Leathermans😅

[@gregbarry5875]

First off, I am a huge fan. I have watched hundreds of your videos and will watch a hundred more, BUT.....this video totally missed the mark. I can't even say: "It was good, but....." Your viewers expected 2 things from this video: #1 Your informed opinion of the knockoffs. #2. A comparison to the Leatherman. For point # 1, Instead of your opinon, we got your brother in laws. I'm sure he's a great guy, but I'm here because I know you and respect your opinon. For #2, we got a comparison of one knockoff vs another knockoff. That makes you O for 2. Sorry, Charlie.

[@gideonstactical]

Thanks for the feedback, I am always trying new things and wanted to give a different perspective. I will do a follow up video at some point.

[@jack.charlesc4750]

If china multitool were in 8cr or 9 cr mov well leatherman would be in a deep mess !!!

[@user-vs5xx2gu5l]

Clones are good if not better than leatherman being 10 times cheaper with all the functionality so it's a no brainer to buy leatherman after you can get better Chinese tools better in every way America made are overpriced performance is way below the clones even

[@Mcdoogle221]

The bibury one is great for the money.

[@devatwell334]

The bibury surge clone beats my leatherman surge.

[@gideonstactical]

It is shocking!

[@devatwell334]

@gideonstactical it is for sure, I aswell have multiple leathermans use them everyday for work and around the homestead but iv been testing this bibury surge clone and it hasn't had a flaw yet only thing I notice is the locks for the outside tools are a little weaker and flimsy but that's expected they still haven't failed though

[@RustyGunn7]

Leatherman is my first choice. I can't stand cheap steel, especially on the knife blades.

[@gideonstactical]

I would say you will see similar results out of the 7CR and Leatherman 420hc. Leathermans more premium models with s30v or 154cm will be better.

[@mcglashenmann2181]

I am always interested in your videos until I realize you made them and it's always a turnoff.

[@gideonstactical]

Sorry you feel that way 🤷🥲

[@mcglashenmann2181]

Dude, I'm sorry for making this post. I was drinking when I posted it and I was in a bad spot. In any case I didn't mean to take my bad energy out on you.

[@NGMonocrom]

You guys want to carry cheap junk, rip-off multi-tools; hey it's a free country. (At least it's supposed to be.) I'll stick with my genuine Leatherman tools that I know won't let me down no matter what.

[@LaResistenciaEDC]

Its been a while they behind... they slept for too long and only pick their best fanbase work to makw money outta it. They done. They lost trust from their their most important fanbase a long time ago. And the arc was the final drop of water ...

[@kathleensmith370]

Leatherman has given up

[@SquireSCA]

Love your stuff, but the clickbait title isn't needed... Leatherman isn't going anywhere, just because a couple Chinese clones are on the market...

[@gideonstactical]

Right on, always appreciate your perspective!

[@SquireSCA]

@@gideonstactical Can't wait to see the new "build your own" model from Roxon. Been rocking the Leatherman Arc most of the time for the past couple months, but that Roxon should be interesting, looking forward to doing a review on that.