Is your Dodge Ram stuck in 4th Gear? Here's what will fix it!

This video will show you how to Install and remove a solenoid pack kit in a Dodge Ram, offer Tips and Recommendation. Is your Ram stuck in 4th Gear? Replacing your solenoid pack should get your truck back up and running perfectly. There are MANY helpful and insightful tips and recommendations in this video. My data comes strictly from Chrysler software and not playing the guessing game.
NOTE: Does your truck have over 50k miles? If so, you too should change your fluid in your transmission. You don't have to change the solenoid pack.
Below I have listed some models this kit or video will apply to. However, it is important that you check your transmission model #.
Transmission Models;
45RFE or 45-RFE
545RFE or 5-45RFE
68RFE or 68-RFE
Compatible;
2007-2009 Chrysler Aspen
2000-2011 Dodge Dakota with 4.7 / 5.7
1998-2011 Durango 3.6 / 4.7 / 5.7
2007-2010 Dodge Raider 4.7
2007-2011 Dodge 2500-3500 6.7
2002-2012 Ram 1500 3.7 / 4.7 / 5.7
2004-2011 Ram 2500 4.7 /5.7
2007-2017 Dodge 2500 6.7
2006-2011 Jeep Commander
99-04 Jeep Grand Cherokee 4.7
2009-2011 Jeep Grand Cherokee 5.7
2005-2006 Jeep Liberty 2.8 / 3.7
2007-2011 Jeep Wranglers 2.8
Help me get to 30k subscribers! I would REALLY appreciate it. Thanks in advance!

[@gatorwhiskers9011]

I can not tell you how much I appreciate content like this

[@TerenceDIY]

I can not tell you how you just placed a HUGE smile on my face saying that. Thank you SO much for watching my content.

[@JasonSmith-uo9ee]

This has got to be the most informative and helpful video I have seen on KZbin. Thanks so much Terrence! I just successfully changed the shift solenoid in my 2010 Ram 1500 over the weekend and I couldn't have done it without your video.

[@allthingshiphop1151]

thanks alot. I changed my mothers 07 ram shift pack 2 weeks ago following this video. Her truck is no longer stuck in 4th gear and her transmission is back to working fine. The new shift pack also got rid of the hard jerks when switching gears especially on reverse

[@jessedazzu8136]

I've never come across a video with so much details you helped me 100% We need more like you thank you!

[@otiskareem6043]

I guess I am kinda randomly asking but does anyone know a good website to stream newly released series online?

[@hezekiahtroy3339]

@Otis Kareem Flixportal :D

[@MichaelPiccoletti]

Just replaced this sensor bank on my 2014 Ram 1500 and honestly without your video I would have been lost. The only thing I can think to improve the guide would be a footnote in your description of the times in the video of key parts. I skimmed through to find them as I only needed certain information, but this video was / is amazing. Thank you for saving me God knows how much money at a shop!

[@nostalgialane4016]

Hi Michael Piccoletti, I am glad my video helped you. Thanks for providing notes for me. This will help me improve doing future videos. Thanks, again for watching. May you and your family have a wonderful holiday!

[@elimcnett4875]

I had the same issue with my truck, Thank you so much brother for the informative video! You have no idea how much this helped me. I followed your instructions and the truck is shifting perfectly.

[@TerenceDIY]

You're very welcome. I am glad my video helped you. Thank you for watching.

[@doughutchinson412]

Great video! I really appreciate you putting together this step by step video for Dummies like me. The most aggravating part was getting the wiring harness off. I hope you got paid by KZbin for helping people like me. It saved me hundreds of dollars. Job well-done!

[@TerenceDIY]

No problem, Doug Hutchinson. My motto is, If I can do, then so can you! I am glad my video helped you. Thanks for watching!

[@MR.GREINER]

*You do NOT have to pull off the pan and solenoid pack to see what color plug you have. Simply just disconnect the plug on the outside of the tranny, and you will see if you have white or grey. Also ram recommends a “QUIK LEARN” before driving. Have you had any issues driving without a quik learn? I bought both the grey plug and white plug versions from the ram dealer. One was $550 and the other was $650. Parts manager wrote “white”’and “grey” on each specific box. Not sure if he screwed up, or ram…but the box he wrote “grey” on had the white plug in it. “White” had grey🤦🏻 Thanks again for taking the time to make this video. It was EXTREMELY easy the way you showed how to do it.

[@TerenceDIY]

I've done many of these WITHOUT a quick learn. My truck as well as all of the rest still drives amazing. The ONLY issue I have ever had was buying the cheap version. The moment I swapped out to a MOPAR kit, everything was perfect. I've used them every time. I also could have saved you lots of money on those parts. Well, thank you SO much for watching.

[@katiefinnerty6783]

I'm pretty sure you just saved my father's truck that I now have from being worth nothing. I am sharing this with my husband who is more than capable to do this. It is stuck in second but the same exact story of you on the highway happened. I will let you know if it is a fix and I cannot thank you enough!!

[@TerenceDIY]

HI Katie, I'm pretty sure this may fix you guys problem as well. It's a very common issue. However, make sure your husband use and OEM replacement part if he decides to proceed with the fix. I've had terrible luck with the aftermarket ones. Here is a link to the OEM part at a great price (the entire kit)... www.ebay.com/itm/263046493522?fits=Year%3A2010%7CMake%3ADodge&epid=6022621423&hash=item3d3ecaf552:g:EnYAAOSw2ZNgtur3&amdata=enc%3AAQAIAAAA4Om26qsL%2B8EdI%2BafCMr0fjBTGJ7EpxHjFliFiFWW9amjlsuW9b3yDoAQwxoPSzLNu3FRThuigW45Th1FGMzXm8TpGpSV0pz2Bp6XEUTVVjMJ2Xx%2B1RJryYA1kAsDZnsJ0xYTbQo4H24LbokF4wZw7gXCIcXXVWej1fNKmd8dPaY8QCT1Zrj%2Fgq1BeM0z104vi2%2BGPm4XVz1nBOfECS1M1MdqU5VcGVwxfpxHFRE6K8soA40R5Zn%2F9Bnucra2GhpFD6zxaayUdsDJm1aFctuUg4aJBc5d7Eqq8CDuPB8Zm2ks%7Ctkp%3ABk9SR4SSrf-4Yg

[@joserodri57]

Did u fix it?

[@TerenceDIY]

Hi, the video shows everything. Yes, I fixed it and tell you the parts you need.

[@discipleofjah777]

Went ahead and downloaded this video. Had it sitting on the work bench as he walked me through it. Keep it up, you're amazing!!!

[@TerenceDIY]

Thank you John and thank you so much for watching.

[@davemoore9959]

Terrence you are one special fella buddy! To perform that job in freezing Chicago weather is just amazing! I have a very well kept, babied 2010 Ram 2500 6.7 and just today I experienced this 4th gear thing. Once I shut it down and restarted it was fine again. I tow a nice 64 Sport Fury convertible 426 car to shows and I need the truck to be dependable. I will be ordering this solenoid pack Monday from a Dodge dealer I have been dealing with for over 20 years. Yes I am a technician in a small town here in Virginia. I only specialize in A/C & Hunter wheel alignment. This video has given me lots of info to do the job correctly. I want to give you huge thanks for what you do and only wish I could thank you in person. Stay safe and keep doing what you do! Dave

[@TerenceDIY]

Thank you so much Dave for the kind words. I am glad my video helps in anyway, shape or form. I make them just for that reason. Once again, thank you and thanks for watching! By the way, nice ride you're towing!!!

[@davemoore9959]

@@TerenceDIY Thanks! kzbin.info/www/bejne/moCad6yNoN-WedE

[@TerenceDIY]

@@davemoore9959 Watching now!

[@catrinawillhite4146]

Thank you for this video! I was pretty scared until I watched this and you made me more comfortable knowing it was fixable.

[@305youtuber]

Thanks for taking on the cold to get the info out there sir👍, stay recording and informing 😉

[@mar56cos]

Just replaced mine. Thank you so much! You saved me labor/garage costs and did it on my driveway for parts cost only.

[@TerenceDIY]

That's awesome! I am glad my video helped. Thank YOU so much for watching.

[@user-ti5cy5dk3b]

Thank you for the detailed video. I am going to tackle this job on Sunday. Your video will be used for this job. I hope you got paid for the ads because you earned it.

[@TerenceDIY]

Thank you so much for the kind words and watching my content. Good luck with you fix. Once again, thanks for watching.

[@89849999]

Just got this problem today. Thx to your video im heading to pick up the parts instead of the transmission shop. Your the man. Thx!!!

[@TerenceDIY]

Here's a link to probably the best deal for the OEM part. I would NOT use an aftermarket one. www.ebay.com/itm/203408499557?hash=item2f5c176365:g:9dcAAOSwHsRYCOrP&amdata=enc%3AAQAIAAABANWWI%2B5oNTGFBilsV4AOf9Y%2Bc4tqy6drIJht44OpojwZ5fcgI6D0XVud3rT9cuSIh1a%2FOZ71YCMA4NGqludnFy4G70jMup4%2FYENHL8nkraxpnQ%2BRLTE%2FumUAS%2FybHCcGJaRiFLw%2Fr4waUrkD2ZIxeetmOIA3yILRghcuiBh8PW72464%2Fmd7X3sBUTcqX5bbj%2FzsBmjCDtLrnM%2Fu5czItKQ%2BFSTTC4znUYEeU4Fmf0OIpGChjK%2FQk713RUv1BFzfVGHPr0Cdrxs%2FvqgaHI%2BssntjBzFsFG%2B25TtVQQAexdMU%2BuEG7zmDkOfC%2FPfSNTHHG1%2Bl1QYdGpyPO2VOuBLaaD7c%3D%7Ctkp%3ABFBM7KOwj6di

[@SmithDrewSmith]

Thanks for putting this video together! Especially for including the torque values. I got mine fixed today following this video, and if I hadn't been given the wrong filter it would have been zero issues. I installed a new pan with a drain bolt, so I just drilled a hole in the old pan to drain the fluid before dropping the pan, worked great. Thanks again!

[@TerenceDIY]

You're very welcome Drew. I am glad my video helped you and you got your truck back on the road. Thank you SO much for watching my content.

[@paulkoffy]

2024 about to do this in Alabama in 90 degrees. 6 years 367K views! My MAN! THANK YOU!! God Bless!

[@TerenceDIY]

You're very welcome. Good luck with you fix and thanks for watching.

[@jerrycann6374]

By far the best video to replace the solenoid pack...thanks

[@TerenceDIY]

Thanks Jerry and thanks for watching.

[@richierich8077]

Thank you! The depth and detail that you go into removing and installing the solenoid pack is top notch. Perfect job to do while quarantining on a Sunday. Cheers from Michigan

[@TerenceDIY]

Thank you, Richie. I am glad my video will help and guide you through the job. Let me know how it turns out. Thanks for watching!

[@richierich8077]

Terence's KZbin, Thank you again. Job total was a bit over 2hrs. My vehicle is shifting perfectly now. -5⭐️

[@TerenceDIY]

Great!!

[@z06badboy18]

2009 ram 1500 4x4 5.7 laramie im having the same issue . Replaced the dirty oil in the transmission with filters and fixed it . 2 years later im having the same issue again so im ready to tackle it. Thanks

[@TerenceDIY]

Yep, time to knock it out. You got it though. Not as bad as it looks. Thank you SO much for watching!

[@JF-vr6td]

Thanks for showing. You come across easy to follow and not some brain wizard that over complicates everything👍

[@Mike-xi1iu]

Man just watched this. Great job especially under those cold conditions.

[@TerenceDIY]

Thanks Mike and thanks for watching.

[@chrisblythe2158]

Dude, 2010 ram has being doing this for the last week. Thank you!

[@TerenceDIY]

You're welcome Chris. Here's a link to a great deal on the best part (OEM) just in case you have to purchase it. www.ebay.com/itm/263046493522?fits=Year%3A2010%7CMake%3ADodge&epid=6022621423&hash=item3d3ecaf552:g:EnYAAOSw2ZNgtur3&amdata=enc%3AAQAIAAAA4Om26qsL%2B8EdI%2BafCMr0fjBTGJ7EpxHjFliFiFWW9amjlsuW9b3yDoAQwxoPSzLNu2KD8bgKBMKpSDm%2FUpVRAWaLk7eUmAS9dGqX5hBnXzgUMvBwCFAgI4Me9en5egF5KXPUlLesaMnt%2FkUOYaPw%2BI8zM5UTFgdoyrMWNrIfZ9bDxjWMLIi3hfE2kp7bQ9aGuCZe59JENWpTLlivbPS%2FCIhQSD%2BaMOyplvcw9C%2B3u6qJdBqK%2BHernMK%2BdAHFhm%2F%2FTGwTEu8pjC1ORE%2BhlTwLlUeoaf%2FG8RoXbCv8ri8DXkux%7Ctkp%3ABk9SR66f6_G8Yg

[@psiclown7441]

Thanks very much for the video, I'm about to tackle this project when my solenoid gets here tomorrow. I appreciate all of the insight, especially when things didn't go exactly right. Most folks leave out the hurdles and make it look a little too seamless.

[@psiclown7441]

Welp, it’s fixed! Removal was seamless. The installation was quite eventful. From being sent the wrong screen (was fun fighting the pan and gasket for an hour before realizing it was the wrong one) and filter, to snapping a pan bolt, extracting, replacing blah blah. The win is your video saved me a crap ton of cash. Thanks again.

[@ericj4517]

@@psiclown7441 i did mine too. Did you have to do a relearn?

[@psiclown7441]

I re-installed my custom tune right afterwards so basically yeah.

[@PoppaTInstall]

This is a true video w/ warnings included. I have an 2004 Ram I need to do this to. Won't come out of 2nd. Excellent Job my dude!!!

[@TerenceDIY]

Thank you, Poppa T. I hope my video helps you with your job.

[@wk3561]

Thank you for this video! Especially appreciate the mistakes and mishaps. I have those all the time. Makes your video genuine. Maybe a Jet sled under the truck to catch the oil would help? Just a thought. Thanks again!

[@TerenceDIY]

You are absolutely right about a jet sled! LOL Thank you very much for watching!

[@alfredogonzalez-rc4zh]

nice hangin out with you Mr Terence, it was a great pleasure ,thnxs

[@silkroad1201]

You can clean the pipe with some carburetor cleaner/ starter fluid if you get atf on it. No smoking

[@darrenharnke7450]

I have this problem, way more involved than I feel comfortable doing. Nice video!

[@TerenceDIY]

Thanks Darren. It's not as bad as it seems. Just a few hours of labor. Thanks for watching.

[@MapYoda]

How can you not like this video. Fantastic work, Terence.

[@TerenceDIY]

Thank you, Jason.

[@shawnparsons6446]

thank you for the video. mine is a 2012 dodge Larime 6.7 litter. and I'm a hillbilly from southeast Oklahoma, with your video my cousin and I fixed it. just like you said (stuck in fourth gear.) may God watch over you.

[@TerenceDIY]

Thank you so much for the kind words, Shawn. I am happy to hear that you got your truck back up and running with the help of my video. That's the MAIN reason why I post these videos. I was put on earth to help others. Once again, thank you and may God bless you and your family.

[@shawnparsons6446]

@@TerenceDIY pulled camper up to Iowa to work. and pickup handed it perfectly.

[@TerenceDIY]

@@shawnparsons6446 Nice!

[@dominicgallegos8383]

Followed you step by step! Fixed my truck thank you!

[@TerenceDIY]

That's awesome! Made me smile. Thank YOU for watching.

[@christyrussellsanford4812]

Best video for fixing my shifter problem. Great Job! Terrance.

[@dcrobinson77]

Getting ready to change out the solenoid pack in my 2010 Ram. Great video, perfect detail and had a good time watching. Keep up the good work, this is the best DIY video I've seen in a long time. Huge thumbs up!

[@TerenceDIY]

Thanks for the compliment. Please let me know how your solenoid pack installation goes. Thanks for watching!

[@julianrivera2593]

How’s the truck now ?

[@CharlesTheTruth]

@@TerenceDIY I'm wondering how the truck is doing too? I'm here because I have to change mine on my 2010.

[@TerenceDIY]

@@CharlesTheTruth , I sold it but I often see it. It's driving great still.

[@keithdyke9260]

Since you've done this repair is your truck still working fine thanks for video

[@TerenceDIY]

Hi Keith, I sold my truck two years after doing this and it drove perfectly. No issues whatsoever. Thanks for watching!

[@chriswhittle9492]

I just wanted to let you know brother You saved my life and my pocketbook! Not sure if you're getting this or not. Just wanted you to know. Everything went exactly how you explained. I'm up and running again ! I was fortunate to work in the 80° weather rather than 20° weather though ❄️ I couldn't be more grateful for ya! Thank you!!

[@TerenceDIY]

Thank you very much Chris. I'm glad my video helped you. Thank you SO much for watching!

[@commercialfishingnet2188]

Thanks Terrence once I seen you do it , then I went out and did it , you saved me a shit load of money , keep on making videos

[@TerenceDIY]

You're welcome. I am glad my video helped you.

[@cruizer9955]

Great information. Looks like I'm about to do this to my 2010 Ram Sport. It just got stuck in 4th gear today. Looking for kits online. Thank you for taking the time to share your experience with yours. doesn't look too complicated.

[@TerenceDIY]

No problem, David. Please let me know how it turns out. Thanks for watching!

[@gordonray3091]

Excellent video Terence. I've viewed other KZbin videos on removing the solenoid pack. Your video is the only one explaining how to remove it if it's stuck. Thank you sir.

[@8waverider8]

Same problem just happened to my 2013 today. I'm gonna get all the stuff and go to town tomorrow. Awesome video Terrance!! Thank you so much for posting this!

[@dieseldong4781]

How did it work out for you my 13 pulled this shit today

[@davidjimerson3817]

I've been looking for help on this problem forever thank you

[@TerenceDIY]

You're very welcome. Thank you for watching.

[@timrodriguez6207]

I thoroughly enjoyed the video👍🏽 My truck is having same issues now, Exactly! Same codes. Now I’m goin in!! 👍🏽THANKS!! 🤞🏽🙏🏽🤞🏽.

[@TerenceDIY]

Awesome Tim! Let me know how it turns out. Thanks for watching.

[@XBigBomber25X]

This might have been 6yrs ago but damn your video might have saved me a lot of heartache. Been wondering if anyone was sharing my luck with this problem but I’m glad I found your video. I’ll let you know & hope this fixes my baby 🍻

[@TerenceDIY]

I hope so too. Thank you so much for watching. Here's a link to the OEM part for the best price just in case you don't have it yet. www.ebay.com/itm/263657247625?fits=Year%3A2010%7CMake%3ADodge&_nkw=2010+dodge+ram+transmission+solenoid+block+MOPAR&epid=115330325&itmmeta=01J6X91E683E9GW5HZYWA6J0BD&hash=item3d63325389:g:Q2YAAOSwsE1aEvSo&itmprp=enc%3AAQAJAAABEHoV3kP08IDx%2BKZ9MfhVJKlS69MEe1rruhgW7IHXjh4pbURZjDr8uXe2ZqBUcW9ok7Ksb1oczuCr0HcOIod8Fc1DMagGpx9AimN%2BL3CXKMcNnekyNzVVaFwZO%2Fq5FzMyly9GOrnrowOUmDaeuUybBNE5I4KQDgg1hoMHzW%2Fsau%2FbEwX4JM26XuoMv%2BHmQmXWniWMwfbPK5JlmuNf%2BkDilHqwY9bqXyRAiLblBmjCi65j3nZC4Q98lZwdRBqQIJYHSW80hLTlKH8G85IR239vTJ4hPkxucG7eT5oGWGYRvZJJMnZ%2BzP%2FL20tZZi%2FuMultE6Z%2Bzi0D6upWaxMEi%2B3jUSGKBeCOjeEcIXgpO6yZAuQO%7Ctkp%3ABk9SR8bjham3ZA

[@XBigBomber25X]

I have it already and Just FYI.. IT WORKED 🍻🫶🏼

[@TerenceDIY]

That's great!

[@lawrencecrawford1517]

Just came across this video. It was awesome. I recently just upgraded camshaft, litfters, etc. Getting ready to change rear main seal also. I've always had my transmission and rear diff serviced. The truck is now at 250,000 miles, and still no issues. I'm going to go ahead and order this part. Thx.😊😊😊😊😊

[@TerenceDIY]

You're very welcome. Thank YOU for watching my content. Keep up the good work with the maintainence on your truck.

[@markmartin3152]

Great video. Don’t feel bad about that spillage with the pan, everyone seems to do that. If I have the extra $ I will get one with a drain plug when I do mine, I got a 45rfe. Great video, thanks for taking the time, I feel better about doing mine now….

[@TerenceDIY]

Mark the pan with the drain plug is worth the money. I hate I did not buy one for mines. Thank you SO much for watching and good luck doing yours.

[@josholah3545]

Thank you for the video bro. I am about to do this same job to my RAM and this was everything I needed to know. I will also be doing this in the cold so ill be right there with you in a sense. ill probably comment again after I get it done. thank you again!

[@TerenceDIY]

Thank Josh. Please let me know how it goes and dress warm. lol

[@davedingobeast]

I replaced the shifter pack and trans filters but stayed the same. Replacing the tcm fixed the issue. Take my advise for people who have had similar situation.

[@erichinojosa3834]

Where did you get the tcm

[@davedingobeast]

@@erichinojosa3834 allcomputerresources.com

[@donniebob3]

Thanks for taking the time to make this video. It was a great help!!

[@untangledmind1]

Thanks for the video man. Just did this on my 2015 Ram 1500 6 speed trans. I hadn't done one in a while so your video was a great guide to torques and the right steps. Thanks for taking the time to make this. Fill it tomorrow and find out if it's all good.

[@TerenceDIY]

You're very welcome. Thanks for watching!

[@untangledmind1]

That did the trick man! Thank you for freezing your butt off to do the work AND make a video. I do appreciate it. 👍💯

[@TerenceDIY]

@@untangledmind1 , that's awesome!! Yeah, I froze that day. LOL. Thank you SO much for watching!

[@TIGER24TIGER]

Hey there. Im from Saudi Arabia and I have an issue with my 2015 dodge Ram 6.4L it is exactly the same issue that u had .. my car has hard shifting then it stucks on 4th gear > I bought a new solenoid pack will fit this tonight and see if this problem will be sorted > my gearbox is 66RFE ... anyway thanks for the helpful vid keep on man 👍

[@TerenceDIY]

Good luck with your job. Please let me know if this fixes your problem. If this doesn't I will help you figure it out. Thanks for watching!

[@TIGER24TIGER]

@@TerenceDIY Thanks a lot man! Im pretty sure it will works once I fit the new solenoid on bc I have the same problem u had + the fault reader shown me 5th & 6th gear ratio faults > and one of the possibility malfunction was solenoid pack .... anyway I let u know after fitting ..

[@MegaSwagger3000]

Thanks for capturing this DIY! My dodge started to exhibit the dreaded 4th gear last week. I prime ordered my parts and install the kick down solenoid today thanks to you! As always, For we're conceived as Winners and we're born as Champions. We're literally the best possible outcome of our creation story! #God_loves_you_and_so_do_I #I_Am_The_Best_Possible_Outcome

[@Bjl-zv9nm]

Thanks for the info I was debating on doing it myself or brining it to the shop but after watching this think ill do it myself. My biggest worry was if there were small ball bearings that would fall out of the valve body when I pull it down but that dosent seem like a problem so ill definetly tackle it thanks again

[@edwardimperial8360]

Did you do it on your own

[@jasonthompson587]

Terrance I followed your video to get the valve body out of the transmission. Great instructions, my vehicle is a 2012 Jeep Grand Cherokee. The connector was the hardest part and the clip mechanism is slightly different and could only be done with 1 hand. The drive shaft is in the way but I somehow managed to get it off. Thank you for the video

[@TerenceDIY]

Hi Jason, I am glad you got it fixed. How is it working now? Let me know. Thanks for watching!

[@varaxiangames8921]

Mine did this. It's definitely dying, but I managed to get it to reset after I other battery power. Enough to get to the store.

[@brooks2407]

Thanks for putting this on the web bro. Can you PLEASE tell me what the repair software is that you talk about in the video. I have a 2012 Dodge Durango R/T doing the same exact thing. Ordered the solenoid and will be doing the repair in a few days. Thanks again.

[@kevinschomisch]

How many times have I said " Well THAT didn't go as planned" !?! You sir , have a great demeanor and patience !! LOL. Great video btw! Thank you!

[@TerenceDIY]

You're very welcome, Kevin. Thanks for the compliment and watching!

[@shawnlee4398]

Best vid ever on valve body!!!! Thanks bro!!! Awesome job!!!!!!!

[@TerenceDIY]

Thank you, Shawn!

[@comosisupierachannel1818]

This is just happening to me I was going to take it to the shop but men YOU ARE THE MEN I will work on it tomorrow my self thank you

[@TerenceDIY]

You're very welcome, Eduardo Sanchez. I hope my video help. Thanks, Terence

[@comosisupierachannel1818]

I let the battery disconnected all night and now the problem it’s left do you think I need to replace it or wait till it completely brakes

[@BillyP-49Chevy]

Did it twice on my 2011 Ram and now it's time for my 2016. WTF you'd think Chrysler would have this figured out. Ats on KZbin has a spacer kit harness to avoid doing over againand again. Basically it provides 300 PSI pressure instead of 160 which constantly fails. It will insert a spacer plate in between the valve bodies to create more pressure and they provide you a little computer so the computer reads the new pressure. Strictly for your information I'm not doing it like I said because of cost. But yes this guy did a good job on his video

[@TerenceDIY]

Thanks for sharing that information Bill.

[@acwright]

That transmission fluid splash... I can relate!

[@petedabrowski2078]

Terence, HUGE THANK YOU for this video. Your video saved me a lot of money and gave me confidence to do this on my own. Thank You and keep up the great work!!!

[@TerenceDIY]

You're very welcome, Pete. I am glad my video helped you. Thanks for watching!

[@dcorona18]

Great video Terence! Thank you as this is something I am about to do but wasn's sure I could do it. Awesome!!

[@TerenceDIY]

Thanks, Daniel. If you watch the video carefully, you will breeze through the job. Let me know if you encounter any problems. Thanks for watching!

[@davefried81]

Great video! I have a 2016 300s Vvt. Getting stuck in 4th gear unless I let the gas loose

[@TerenceDIY]

Thank you. It sounds like you have a solenoid issue.

[@NTromb]

Good job brother, as for that filter take some transmission fluid off those drops run around liberally on the seals before you tighten it and you will not risk ripping the seal on the transmission fluid filter

[@TerenceDIY]

Great advice, Neil. I normally do that. Thanks for watching!

[@johnjyoungjr7400]

Great video Terrance! How did you get the Chrysler data? Is it a subscription?

[@TerenceDIY]

Thanks John. I bought the software from eBay.

[@deleglen]

BIG Thank you!, do we have to do a "quick learn" with a two way scanner tool? , thanks in advance

[@TerenceDIY]

Hi Jonathan, you do NOT have to do a quick learn. Thanks for watching!

[@ussir]

Great video. Saving it for future reference for my 2014 RAM 1500. Thank you for posting it.

[@Vanggo]

Thank you for all your hard work. You saved me a lot of time and money. I’ve tried to document and up load my projects. It’s not easy ... I really do appreciate it. Great job! W

[@juanzaragoza9176]

Thanks I’m going threw this right now I’m going to try to fix it I have the same exact problem

[@TerenceDIY]

No problem Juan. Thank you for watching. Here is a link to the parts if you haven't bought them already. This is the Mopar brand (the best one). www.ebay.com/itm/263046493522?fits=Year%3A2010%7CMake%3ADodge&epid=6022621423&hash=item3d3ecaf552:g:EnYAAOSw2ZNgtur3&amdata=enc%3AAQAIAAABAPXc07rmoehlLwCP8tV%2BU7f7xGXBB34Kzrfoqxpikk137feDzoCf3XyF5or%2Fkm9%2FKdPBrGs%2FMXkntII27ZpZNMiAH3eymDGeygkRmJidC28OObSQOegdyjHO2tmE9DRUty3EEJfp59616u46wKp2wxko60RzRECcwJdufk9tgbFxe6JD7NcmfyYSnO99rkKs3Req2VjKa5Dtf1%2BwMcgEjXi0J1DvwMMFIJWOczm5AA7T4UUEZsZUl19XToteMaOMsC6D6oq1B%2BxK6tQ7hOY1kR7o73q%2BkeuO0FTPTaNj%2FI3ZZ1FyEINAjZaFwd7E0ZqhI46fRB%2FHNYixkKFCkTugDd4%3D%7Ctkp%3ABk9SR6yLkKyqYw

[@Aum_shantishantishanti111]

Success ! Thanks for the time you took to make this video brotha helped me a ton !

[@TerenceDIY]

That's awesome Justin! Thank you so much for watching.

[@28BIGNORM]

HeyTerence just go around to working on my 2010 Ram. We were able to remove the assembly & Trans Filters as U did. Today got the Solenoid & Filters as needed also got a New Trans Pan with Drain plug & plug has magnet on it for next time. Hope that don’t happen. Changed it all out & tested Truck when we were done & cleared code & Transmission shifted Perfectly Fine. I did view UR Video A few times so Thanks again for all of UR Help & Great Video. Norm

[@terencesimmons2132]

Hi Norm, I am glad my video helped you get your truck back up and running. I wish I would have purchased that Transmission pan with the drain plug as you did. That was a great purchase! My truck has been driving smoothly. I have put over 10,000 miles since I fixed it- traveling and towing everywhere! If you don't mind, please keep me updated on your truck's performance. Thanks, Terence

[@stephhurshman2366]

Thank you ! Taking mine to shop for this repair, I appreciate it

[@TerenceDIY]

No problem, Steph. Thanks for watching!

[@bubba.watercraftj7269]

Great video. Did you have to do a “quick learn” after the repairs with the scan tool?

[@TerenceDIY]

Nope, you do not have to quick learn the system. Once you connect the battery, it will relearn itself. I've done a few of these. Thanks for watching!

[@ParaKordProductsUS]

Your video saved me so much money and I was able to follow your steps from start to finish. Thanks so much!

[@TerenceDIY]

You're very welcome, Roger. I am glad my video helped you. That's what I do this for. Thanks for watching!

[@ParaKordProductsUS]

And for the ultimate testimony, 3 days after I did this I ended up towing a tractor and trailer absolutely no problems.

[@TerenceDIY]

You just put a smile on my face reading this. Thanks for watching, Roger.

[@fliptriks17]

Same problem with my 2013 ram sport 5.7L thanks for the details...great info, will watch again to fix mine.

[@TerenceDIY]

You're welcome, Justin. Good luck with the job. Thanks for watching!

[@glennshott1039]

Great vid, helped me out .God Bless from Alberta, Canada...

[@TerenceDIY]

Thanks, Glenn. I am glad my video helped you. Thanks for watching!

[@NativePrideOutdoors]

Must be commen was headed to the stand and didn’t wanna shift out of 4th now I gotta fix this

[@TerenceDIY]

Yep, pretty common issue. Thanks for watching.

[@pointmass]

Wow sir!.... You are truly an amazing person. Excellent video and your demeanor is heart warming. We have the same exact problem with our 2009 Jeep Grand Cherokee 5.7. Much love my brother and I honestly can say I look forward to many more of your videos.

[@TerenceDIY]

Hi Ronald, Thank you so much for the pleasant message. I sincerely, appreciate your kind words. I am glad my video helped you. Thanks for watching and Happy New Years!

[@Liberalbatman]

My 4-runner 89 would do this. The only way to fix it was to gas it while cruising and it would down shift and fix it self for a bit. Shifting sensor or something right under the pan fixed it.

[@darnellwilliams326]

You look a lot like Boosted F150 , great information sir.

[@trustmebro8500]

Bad Muthafukah!!! Thanks bro my shit is running like butter; followed evrything except I did it in the summer I hate freezing my ass off.

[@TerenceDIY]

You just made me smile. Glad to hear you got your truck back going. Thank you SO much for watching.

[@nathanehrhart1621]

Thanks! This video helped me out man thanks!

[@TerenceDIY]

You're very welcome Nathan. Thank you SOOO much for the donation and watching my video.

[@curtiswallace6749]

Thank you for sharing this!!!

[@TerenceDIY]

You're very welcome. Thank you for watching.

[@cjsteele6922]

Props for not swearing at the stupid plug at the beginning

[@jkind-Leron]

tHANK YOU tERRENCE YOUR MY REAL LIFE SUPER HERO, PLEASE MAKE A VIDEO ON HOW TO CHANGE RACK AND PINIONS ON YOUR TRUCK..

[@TerenceDIY]

Hi Jeffrey, I sold the truck a couple of years ago but, If I still had it, I would have made a video on how to change the rack and pinion in a heartbeat for you. Thank you very much for watching!

[@sloyoteftw]

This is true video tanks for the help sir

[@pascualsorianodelarosa9872]

I just wanna say thank u broo much love to u n your family thank u for this video I just changed my shift solenoid thank u one’s again

[@TerenceDIY]

You're very welcome. I am glad my video helped you. Thank you SO much for watching!

[@ryanwoodworth3095]

Give yourself a pat on the back. Huge thanks this video was a game changer for me

[@angelab1353]

Excellent video!! Precise instructions and I appreciate the education as well. My mother and I watched this whole video and thoroughly enjoyed it. However we did laugh when you doused yourself with transmission fluid and also when you attempted to scrub the black off the transmission pan. 😂 Your efforts are truly commended. I was trying to determine if I was going to replace the solenoid pack for a 2012 Dodge Ram 1500 5.7L hemi Sport. It hasn’t slipped into 4th gear yet but it’s well on its way. Trying to be proactive. Anyway keep up the momentum. Videos like this are a blessing to diy’fers like myself. I work on all of my cars and certain family members cars so I look forward to some visual aids from the online community before I get under the hood. Your video far exceeded my expectations 👍🏽

[@TerenceDIY]

Hi Angela B, I am glad my video helped you guys and gave you a little laugh! Lol. It's awesome that you do all of the work and help others. Keep up the great work! As far as changing that solenoid pack, I think you should wait until it goes into 4th gear or limp mode. This will give you a clear indicator that the solenoid pack has become faulty. Is your truck throwing in trouble codes? Is the transmission shifting correctly? I'm asking because I want to know why you think you have to change the pack. Thanks, Terence

[@angelab1353]

Thanks for the feedback. Yes, I am still in research phase so I wasn’t planning to do it until I confirm that’s the true issue. It’s been shifting incorrectly for the past several months. Sometimes it will not start and says reverse when it should be in drive and it was getting worse. First set of codes were P0403 and P0141which I originally thought meant I needed to replace the egr valve but since this model doesn’t have an egr valve I then knew it had to be either legit communication issues with the control panel or worst case scenario, the transmission solenoid. The first codes were read using T-Mobile sync up drive which stays plugged into the truck at all times. I read somewhere that this device potentially throws erroneous codes so I unplugged it..put it on an auto body diagnostic and dtc were same U0141, U0403 U110E, U110C. I decided to try rebooting the pcu yesterday by unplugging the battery for 10 minutes and it cleared the codes but I’m not sure that’s it. So, that’s where I am today. Still testing. I’m narrowing down the issues and I’m willing to bet it’s either one of the following: 1. A component within the TIPM needs to be replaced 2. The the whole TIPM needs to be replaced 3. The TMobile Sync Drive needs to stay removed because it’s a generic crock of crap that’s throwing the fuse panel 4. Worst case scenario I got some transmission issues and perhaps the solenoid pack needs to be replaced.

[@beegpuppy1983]

Howzit Terence I had the same experience with my ram stuck in fourth gear showing a code PO750 googled it and your video was one of the first results of the search and I must say it was very helpful and informative made me feel like I could do the job myself and I actually did it ! Followed it step by step even managed to get the oil all over myself 😀 the repair went smoothly but it took me four days to find the torque wrench no auto parts store including dealership had it found it at home depot for 70 bucks I appreciate your help thank you brada aloha from O'ahu

[@TerenceDIY]

Hi beeg puppy! I am glad my video helped you. I had to laugh at you getting oil all over you as I did. LOL . Well, I hope your truck turned out great. My truck still runs amazing. No issues with the transmission whatsoever. Thanks again for watching! Have a wonderful day!

[@kevev]

Brother you saved me a lot of $. Thank You very much!

[@TerenceDIY]

That's awesome Kevin! I am glad my video helped you. Thank you very much for watching.

[@zamira3106]

Thanks for the informative video. Just ordered the solenoid kit for my 04 Ram. 545rfe to be exact. I’m gonna start this weekend to do it. 4th gear problem too. I’ll let you know how it goes.

[@TerenceDIY]

Please let me know how it turns out. Thanks for watching!

[@zachrambin1309]

Did you have a grey connector on your stock solenoid?

[@roger111ify]

Good video, i appreciate these videos, helps us save so much money. Again thanks..

[@chuckhunt2605]

What if you break the white clip part on the wire harness? Im assuming as long as i get it down tight and the red clip back on i should be alright… anyone else do this?

[@TerenceDIY]

I don't think you will have any issues as long as the red clip is inserted.

[@AlbertoGonzalez-ry5hj]

Solved my problem very good video thanks man 👍

[@TerenceDIY]

You're very welcome, Alberto! I am glad you got your truck back going. Thanks for watching!

[@1968dirtydawg]

Great video, ram still has the problem with the shift solenoid, I have a 2016 ram 2500.

[@TerenceDIY]

Did you replace it yet Les?

[@1968dirtydawg]

@@TerenceDIY have the parts now, maybe this weekend

[@1968dirtydawg]

How many quarts to refill ??

[@TerenceDIY]

@@1968dirtydawg , Great! Good luck with doing the job. Let me know how it turn out.

[@TerenceDIY]

Start off with about 6 quarts (Mopar ATF+4)and work your way up from there until you reach the fill line. Thanks,

[@yoamordogos3210]

Great Video, it helped me a bunch, God Bless

[@TerenceDIY]

Thank you and thanks for watching!

[@donaldsorg3536]

Great video, I have a 2011 Dodge Ram 1500 Big Horn and I had the same issue and code P0750, since I've watched your video the job isn't as intimidating now, I again thank you for this great video

[@zachrambin1309]

Did your truck have the grey connector on the solenoid pack when you tore it down?

[@superargo4701]

The perseverance of completing the job in those frigid conditions with the wind howling, brrhhh. I'm in Montreal, Canada so I have good idea of what you faced. BTW did you need to do any reprograming of the ECU to mesh with the solenoid pack? Or was it just an ATF filler-up and let idle for a few minutes and then go for a test drive?

[@TerenceDIY]

No reprogramming needed. The latter of your questions is what I did. If you haven't bought the part and have to do this job, here is a great deal on an OEM one (below). I woud not use an aftermarket one. Thank you SOOO much for watching. www.ebay.com/itm/324595294975?fits=Year%3A2010%7CMake%3ADodge&_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3D313e27ff7b834f2a9fee46f59c6ffc4b%26pid%3D101196%26rk%3D3%26rkt%3D12%26sd%3D263046493522%26itm%3D324595294975%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1%26brand%3DMopar&_trksid=p4429486.c101196.m2219&itmprp=cksum%3A324595294975313e27ff7b834f2a9fee46f59c6ffc4b%7Cenc%3AAQAJAAABYKAGZatwWrSFioKhyF05YYps7xtgOI2Vu0BqB4BERv%252FNTfrUNkP50TZAJfREiGj7R%252BA2x2E5zTqSs43jfR6uCcmt8%252B%252BTUdobg9SfOq%252BIqjUBszvl2wzVfB5lzr8XirSHbi6tgvX1XI6imPR1jJ2CObjubQNM5AS8ZXy7Y4t2if32wrxkbKXuxhMMf9Q10B1GP6oUHV797gR6dLyatrPkNiZAtg7zc7YqvuMHJ13u9%252F35JdEQWFoKDL31o6p9IPEqMAjGSmpgXTqgH7lofTSesyxhGRXCFanpCtvjbUmqKvGiUuDpzsO9jaOnwclt2vvFbTjjWC56Ozb6b0Z%252FSxyqfFVOtv4Bocf%252FpPdpkVjQv%252FUDQ%252Bh%252FuPdaJQLwgwF69rh8nG7HIHqA5j3hJ1bPSCQGspHJQPKyL9urTrXdG96cZ3KqMepFYmHwZYkPUDghT2O8nNINlihPCLs5241JGWCdcg0%253D%7Campid%3APL_CLK%7Cclp%3A4429486&epid=21037527747&itmmeta=01HSWNAWWS7N2NV6AR86C70963

[@sharee-1111]

Thanks Brother, I'm in TN and i just got a thump and my 2016 Ram 3500 is stuck in 4th gear. It does the same thing yours is doing when I turn it off and back on.

[@TerenceDIY]

Hi Sharee, sorry for the delayed response. After talking with KZbin, I am still having issues receiving my comments so I see them late. It looks like you're going to have to replace that solenoid. Is it doing it consistently? Thanks, Terence

[@clintonfrederick4032]

Man, I feel bad for you, doing that in the cold. Thank you for the info.

[@TerenceDIY]

Yes it was bitter!! I'm use to it though. Chicago weather is brutal! Thank you SO much for watching!

[@clintonfrederick4032]

@@TerenceDIY My pleasure. Wish me luck.