IS300 gets Angle - Drift HQ adapters

[@Careless_is300]

Those wheels are sick

[@vickramos9234]

How’s the longevity been with the Drift HQ angle kit? Had any failure with it? Or anything related?

[@DCS_Garage]

Shit I was just looking at buying these on the website so I clicked your video and was like damn it's Dbo I know him lmao I met him and Jason Evers at Midpond years ago. Small world

[@Victhekidd28]

Do you have the other link for the driver tie rod

[@jirinummelin3636]

I ordered even cheaper PQY ones. Waiting for them to come and see if they work

[@KungFuJordan]

Send them back or you are gonna be sent to the shadow realms 😂😂😂 I learned my lesson with those

[@keikid1156]

@@KungFuJordan what happend to urs?

[@KungFuJordan]

@@keikid1156 they will be ok on the street but with more speed and more grip at the track. It’s gonna shear ! And you are going to loose your entire knuckle / spindle .

[@burniesender9980]

Hey did you screw in the gs300 outer tie rods to the same spot as the stock ones?? I did and it toed in like crazy when I installed everything. I had to screw them in a couple more turns. Idk that was right

[@FreeStyleMediaNola]

Nah we just eye’d them up best as possible and we are going to get the alignment done. Hopefully lol.

[@lukal8443]

Hi, do you need to hammer those collars in the knuckle adapter or do they just slide in? Those little silver centering spacers..

[@FreeStyleMediaNola]

Yea I tapped them in with a plastic hammer, it shouldn’t take much. Just try not deform them and you’ll be alright.

[@MikeTW]

Lots of angle for a little money, what’s not to like!?

[@FreeStyleMediaNola]

I wasn’t expecting those results honestly

[@henryluevano3338]

Does it matter what year gs300 tie rods you run? What year gs300 did you use?

[@FreeStyleMediaNola]

99-03 I believe is the years. It’s the same years gs300 as the is300. Just make sure to run them backwards

[@henryluevano3338]

I barely saw that you replied, but Thanks for the help! I’ll make sure to do that.

[@rafamk4kk]

So there not a direct fit?

[@dfr9789]

can i know what is the safe wheel setup for this angle mods?

[@FreeStyleMediaNola]

I currently run a 18x8 et+30 and I use a 25mm spacer for those which would make them a +5 offset. I also run a 17x9 et+0 and they fit a lot better then 18’s. With the 17’s I use a 235-40 and with the 18’s I use a 225-40 tire.

[@DanielSanchezzz771]

would this work on a 99 Gs300?

[@reklessgarage8666]

Do you have adjustable upper control arms? I’ve got JZX uppers and I’m wondering if I will need any other inner tie rods to make it work

[@KBoogiie]

did u ever find out

[@swapitout5728]

Do you have the ls400 brake calibers?

[@ProjectMidnightDTX]

Drift HQ states in the description of the adapter to run extended lower control arms. Are they necessary or is it just recommended?

[@FreeStyleMediaNola]

Recommended. I do not have extended lower arms but you will need gs300 tie rods

[@AlexPanagos]

Would it be dangerous to run RCAs on top of them? Idk if my big brakes will clear the tie rods

[@FreeStyleMediaNola]

I personally wouldn’t. The shear potential of bolts that long that are directly bolt to the knuckle seems scary. The angle adapter’s act like RCA’s also since the space the knuckle up

[@AlexPanagos]

@@FreeStyleMediaNola Yea i saw they’re their own RCA’s but they also move the tie rods up, I would order extended bolts too ofc

[@TylerF30]

Do they push the wheel out and gain a bit of track width?

[@FreeStyleMediaNola]

Sorry I’m just seeing this but yes it pushes them out about 1/2 inch. Not much but it is plenty enough for most power levels under 500

[@c33jp]

@@FreeStyleMediaNola how much poke do you gain? I’m running model 5 18x8 +45. I’m not looking for much poke from where I’m at

[@c33jp]

I mean at the guard, do you gain poke? Tracks obviously pushed out from the plate

[@jirinummelin3636]

Is the gs300 tie rod only mod you need?

[@FreeStyleMediaNola]

Yes, just be sure to run the backwards. Driver side on passenger and passenger on driver. That’s so they will clear the lower control arm at angle.

[@jirinummelin3636]

@@FreeStyleMediaNola Thanks!

[@Victhekidd28]

@@FreeStyleMediaNola can I have the link for the driver tie rod

[@FreeStyleMediaNola]

@@Victhekidd28 www.partsgeek.com/gbproducts/WC/7533-01092889.html

[@ByCrail]

what kind of lip is that?

[@FreeStyleMediaNola]

It came with the car so I’m not sure. It is polyurethane tho if that helps