How to fix a Oreck Vacuum roller

[@szubyk1]

Thanks so much, I was wondering why my roller wasn't turning (it's only a year old) and I took it apart after cleaning all the hair and gave the bearing a twist and it still wouldn't turn so I got a large pair of pliers and gave it a little twist and it turned and then rolled easily so I just think it got stuck. I didn't take the bearing all the way off and put the sweeper back together and it worked perfectly! I started fixing this Oreck xl (maybe 2001) myself after my husband died (he always took it to the shop and it was never less than $100 for what I realize now is simple stuff. I decided to check out any videos on KZbin and learned how to change a switch, change the roller, clean out the junk in the area that sucks the stuff and delivers it to the bag. This video was so helpful and saved me from having to take it in to the shop. I guess I don't have to put it in the trash bin yet!

[@Iseekoutthetruth]

The Rollers are known to go bad a lot, I have & Oreck Vacuums now, I am Always Repairing Them, So I use Them As parts Vacuums. My Wife Loves Them, I do Not Like Them Myself LOL.

[@HopeyDopey143]

WELL ! Thanks so very much ! I broke 2 belts and was just waiting to come to You Tube to find a very smart and considerate man like you to tell me the problem. Now... I will take care of this myself ! MERRY CHRISTMAS TO YOU AND YOUR FAMILY for the truth ! Sincerely, Hope

[@Iseekoutthetruth]

+Hope Anderson good luck to you thanks for watching and happy Holidays to you.

[@HopeyDopey143]

Wishing you a very Happy New Year ! Keep up the good work !!

[@Iseekoutthetruth]

Hope Anderson thanks

[@joshuaboote8868]

Thanks so much for this informative video. I have recently acquired a ORECK XL 3 in blue and it was in immaculate condition. I replaced the belt and I smelt a burning smell. I looked online to see what it could be and I found this video. Thanks you’ve just saved my 2011 Oreck!

[@Iseekoutthetruth]

Thanks for watching.

[@frankromero3784]

Wow, this guy was right on the money..I did what he did and fixed the brush roller. try this before you buy a new roller

[@mluz1051]

I had my Oreck serviced and it was only $29. About six month later the belt broke. I hit up KZbin and found all sorts of repair videos. This video is by far the best. It tears down into the component issue. Thank you for the post. I am on my way to Ace Hardware for the cloth washer. The other end also has a bearing and a washer. However, it is not as likely to fowl up since it's the part that is not under the pulley pressure. Personally, I love my Oreck, because it is light and it does work. But they do require maintenance more so than other vacuums. I will never buy one of their Steam Mops again. Those were total junk. I love the Shark brand for that.

[@Iseekoutthetruth]

+M Luz my target vac was cheaper and is still working with no issues. Thanks for watching.

[@mluz1051]

Well get this. I just did the repair that you showed. Because yet again this vac needed maintenance. I'll be damned if the frigen thing locked up on me again. What's the brand of your Target vac? I'm sick of dealing with this Oreck. I needs Maintenance after every damn use!

[@Iseekoutthetruth]

+M Luz yup over priced garbage. Most women like it because it's not heavy, but it breaks down to much. My target vac is a hoover and it works great.

[@markdickerson24]

Important observation: My 9300XL which was bought in 1986 (by my mother) has a different roller than the one pictured here. Mine is wood through the core but has a charcoal grey plastic cover. And, it has a plastic grey wheel which DOES NOT screw off. Attempting to do so pulled the metal post, the wheel, bearing and metal/cloth washer out of the wood roller. I was able to get the wheel off the other end of that 2.5" post. Both ends have grooves that hold the items in place as they are put in place by force. The roller pictured here is exactly like the 3rd party replacement rollers that are now available on Amazon for about $12, free Prime 2 day shipping for me. (Delivered on a Sunday!) So, in my case, the bearing is not so easily replaced. I could've possibly replaced the bearing and metal washer (getting the wheel off after the post was removed from the roller bent the metal washer) along with that other cloth washer in the square anchoring part, but for $12? I'm just gonna let 'em deliver it to my front door and pop it in. Bam! PS - Complain about this vacuum as you will, but it is really simple and otherwise apparently lasts forever. Plus, it works pretty darn good and is light as a feather!

[@Iseekoutthetruth]

+Mark Dickerson yours is a 1986? of course it is going to be different, these vacuums are over priced garbage.

[@markdickerson24]

Well, I just wanted to explain that not all of the rollers can be repaired, as the Oreck rep below has mentioned. If someone's looks like this one: drive.google.com/file/d/0B2cvvxLfLQnhNVdEY3dGWjJoOUk/view?usp=sharing then it can't be repaired. (That's an image of mine.) However, though you've been clear about your opinion on this vacuum, MINE is now a ravenous beast! It's hungry for dirt and it doesn't want to stop, commanding me to move furniture around and such so it can continue to gobble it. Pretty awesome, really. I'm impressed! It has been sitting around for a heck of a long time just gathering dust. Had to really clean out the bag. Only took $12 to fix it, though in my case the vacuum itself was free. I'm probably too cheap to buy a new one. Garbage, however, at least this one, it is not. Overpriced? Well, my Mom payed $325 for it in 1986. It's a XL9300. I don't know what different one's there are but she did pay a lot! drive.google.com/open?id=0B2cvvxLfLQnhcVREcFlYSWJLeWM

[@nancylanderson8012]

Good information. My Oreck broke after 5 months. I appreciate your teaching us to fix it ourselves.

[@Iseekoutthetruth]

well the worse you can do is not fix it since its already broke lol, thanks for watching.

[@nancylanderson8012]

I fixed it. Long story short, it had a clog higher up in the elbow part of the chute. It now works. Kudos to you!

[@Iseekoutthetruth]

Nancy Lawler sounds great, thanks for watching.

[@christinedoubles8963]

thanks for the video just FYI 2023 , these brushes can be bought for about 15 dollars now

[@Iseekoutthetruth]

I Know.

[@Gaber820]

I bought my vacuum a year ago and my roller is not like the one in the video, mine doesn't come apart to expose the bearings. I was able to make about .5 mm opening or so, I used a air compressor and ended up pulling some dust balls out but it didn't fix it. I'll have to buy a replacement roller. I am super disappointed in Oreck for using non-fixable parts when they clearly have done it in the past. I think it's a ridiculous that it's a workout to vacuum my rug, after only a year.

[@Iseekoutthetruth]

These are over priced Vacuums, My wife has Three and I am always fixing them and replacing the rollers, she likes them because they are not heavy and easy for her to lift, that is the only reason she likes them lol.

[@Vacland]

Orecks are well built vacuums they are made here in the US but if you have a lot of hair in your house, they will go through the belts and brush rolls. They will also go through belts quite often if you have thick carpet or area rugs, or if my belts change every six months if it doesn’t break.

[@Iseekoutthetruth]

They are Garbage, My Wife Like Them Because They Re Light. She Owns 4, And I Am Constantly Repairing Them. Thats Why She Has 4, So She Has A Spare While I Fix Them.

[@catie052]

Thank you!!! Have the same exact problem. We spent the same amount of money for our Oreck and I was angry because we only had it for a little over a year and I could smell rubber burning. I checked the belt and found that the belt wasn't moving but smoking! Tore it apart and I was furious. spent 250 on a piece of crap! The motor looks identical to my 10 dollar fan in my bedroom. So I am determined to fix this myself instead of going back to the Oreck store so they can d*ck me around. Thanks again for the video...easy fix! All these products are built to break down and I am just tired of it. Last year I fixed our washer that cost us a ton of money and only lasted about 3 years. It spins now but it is still leaking a little bit so for now we have it on top of a big plastic pan to collect the water until I figure that out. and I am trying to fix our John Green lawn mower, which will also be an easy fix. Just have to get the parts and now may have to get the parts for the vacuum as well.

[@Iseekoutthetruth]

thanks for the comments and for watching, this vacuum is over priced garbage. today they build stuff to break it is not about quality anymore that is for sure, good luck on your other fixes.

[@catie052]

couldn't agree more. Thanks

[@catie052]

*Update* it's fixed! and I didn't spend any money either. I just took it apart as you showed and cleaned it out, put it back together and it's been working fine. I still been keeping an eye on the belt just in case but I got 2 more from an old Oreck someone had in storage that they were going to throw out. If there is still a problem, at least I know what to do and I will go to ACE and buy the parts. Thanks again. Very easy fix. Just annoying.

[@Iseekoutthetruth]

Cathryn Sheeran cool its nice to know that you are able to fix your own stuff, makes you feel great inside.

[@christinemcrae564]

Thanks for writing an update Catie!

[@TruckerPolitics101]

O-ring & pick set, Harbor Freight, $2.99. Right before you put it up, turn it over & clean those 15' long, straight, carbon fiber Asian hairs out of that thing! Takes 15 seconds with the hook; less time than dodging the chair legs to clean under the table. My wife's kevlar lochs have taken out our belts & bearings too. But, some may have an even more sinister problem. It's called a Chinese, crap ass pot-metal end roller. The screw-on belt pulley is so fkn cheap that it may have holes or gaps in the casting surface. The belt has constant tension & holes are abrasive. 2+2= China sucks again. HTF can they produce intricate things like iPhones, but can't cast pot metal pulleys with any consistancy or reliability? Amazing. Anyway, Asian noggin-rope/cranial-extrusions is/are stronger than titanium.....tensile wise. They can wear out any bearing with ease. Sank yu foh leading dis.

[@Iseekoutthetruth]

lol

[@shannonpowell4847]

Oh my goodness! So funny!

[@AlwaysStampinUp]

Ace hardware is a great resource for parts when you're doing a diy repair. (The big box stores don't compare). Thanks for the informative video. My roller stopped spinning so I'm off to fix mine now. (I might have to run to Ace hardware).

[@Iseekoutthetruth]

thanks for the comment and for watching.

[@sixtosanta9862]

Thank you for sharing this video ,we have to help each other how to keep our must need it money

[@Iseekoutthetruth]

Thanks for watching

[@tvento]

You do realize that you can buy a new brush roller, and 2 new belts for $11 @ AMAZON.

[@Iseekoutthetruth]

I know now.

[@aunabreslingaming3279]

I mean it saves a nice.... stick from becoming firewood? lol

[@twomblypublishing]

"because it has reverse threads" ...you saved my day !! ;) lol THANK YOU! :D

[@Iseekoutthetruth]

your welcome, thanks for watching.

[@christinemcrae564]

I don't like machines with personality. Oreck definitely has quirks. I replace the belt when the vacuum starts to drag, which makes me tire more easily. Those darn belts are a pain and they get warped after no time really. Keep extras. On mine I also have to replace a cracked fan housing ugh besides putting in a new brush. Thank you for your video!!

[@Iseekoutthetruth]

+Christine McRae thanks for watching, I got rid of mine.

[@dianneteger1439]

interesting video.. thanks for posting! you are very honest and upfront about your findings. My Oreck seems to be hard to push.. i wonder if its a similar issue.

[@Iseekoutthetruth]

my wife Oreck just broke another belt and it was a little hard to push she told me. So I took it apart and the roller was completely packed with long hair around the rollers ends and the belt was broken. I cleaned it all up and put another belt the 4 th belt so far and its working normal again. thanks for watching.

[@mamtoou]

We can not get the silver end of the roller brush off no matter how we try. I did have it replaced by a vacuum repair shop last year. That end doesn’t spin as freely as the other side, so I’m sure that it needs to be inspected, even though I clear any string/hair off my roller after every use. Any chance they’ve changed the design so that they’re permanently affixed? Have I mentioned I hate my oreck?

[@Iseekoutthetruth]

Over priced garbage.

[@rayrainer985]

You don't talk about the other end and how to fix that but it's the other end that is stuck on mine. It won't turn like the belt end. That black plastic square doesn't turn opposite the belt end. Maybe you can't fix it?

[@Iseekoutthetruth]

Change The Roller.

[@wtam69]

Use it enough and it'll break. I wonder if you can lubricate the moving parts to minimize the wear.

[@Iseekoutthetruth]

I have a vacuum I got from target for 45 dollars and it gets used more than this oreck and i have never had a problem with it and i have had it for 2 years, this oreck has gone threw 2 belts and now 1 roller in less than 8 months

[@wtam69]

Iseekoutthetruth I actually bought a hoover upright for $60 or so and I've never changed the belt or the brushes. Maybe your Oreck has better suction or clean better.

[@Iseekoutthetruth]

I payed like $270 plus dollars for this vacuum, it use vacuum bags, my target vacuum is bagless. my wife only likes the oreck because it is a very light vacuum and my target one is heavy. the target one has all kinds of different attachments and a retractable cord. this Oreck has nothing and the cord is very short, you have to use a extension cord if you want to vacuum the whole house, I think its over priced garbage.

[@wtam69]

Iseekoutthetruth It's funny as my friend just mentioned to me he has a problem with his vacuum cleaner. And he has the same brand as yours. He'll bring it over to me to look at next week. I bet it's the same broken belt or worn bearing problem.

[@Iseekoutthetruth]

it is a easy repair, they sell the bearing and cloth washer at Ace Hardware. its a cheap fix, better than buying a whole new roller for $44 plus tax

[@angiehayden946]

Mine is rubber. How do I get it off?

[@Iseekoutthetruth]

I do not know.

[@deborahmillek2983]

Do you know how to fix the self propelled part?

[@Iseekoutthetruth]

No self repel on my garbage Orek.

[@brettmullins751]

Does Ace still have bearings ?

[@Iseekoutthetruth]

No idea, call them

[@brettmullins751]

@@Iseekoutthetruth i will look next time at Ace hardware. I was asking because stores delete if not selling you made videos yrs ago..I enjoyed your video

[@Iseekoutthetruth]

@@brettmullins751 thanks

[@ryanpatton2159]

Had this exact issue, thank you sir.

[@Iseekoutthetruth]

You're welcome!

[@jaisonx12]

Does anyone have a part number for this roller? We have three at my place of work and they all have the cheap plastic ends so they don't come off like the metal ones. I want to order these so I don't have to keep telling my boss that we have to sink money into rollers every 5 months.

[@Iseekoutthetruth]

sorry no part number on mine

[@lindafrancis3470]

I have bought 4 Oreck Vacuums, I gave my 2 daughters and 1 to my mother as gifts. My is 15 years old and I just changed my first roller. I ordered my roller from Amazon, it came with 2 rollers and 6 belts for 21.00. I brought the other 3 to my house and cleaned them and changed the roller on one of the other ones. The other ones are 10 year old. Best Vacuums I have ever had. I will not buy any other kind.

[@Iseekoutthetruth]

+Linda Francis I will never buy these over priced garbage vacuums ever again.

[@firedo_g6268]

Bought mine at Goodwill for $15 and love it. The brush bristles were getting sparse, so I bought a new roller on EBay...for a whopping $11.99 with free shipping. Have had more trouble with Dyson than any other vacuum (clutches burning out, and plugging issues). The Oreck is definitely above average.

[@michellec9368]

I bought a rebuilt Oreck 20 years ago and have always had 3 or 4 indoor cats to boot so I use it a lot. I have had to change the roller once, yes there right much cheaper on Amazon but going to check out EBay now thanks to other replies here. I constantly cut and clean out hair from the roller, I have really long hair too, and thankfully I have had no issues.....except one. When I take the back cover off for real deep cleaning, it’s a bitch to line up belt and get it all back together. It takes me a few try’s to line it all up just so, wants to pop off. Other than that infrequent PIA task I’m happy with it, I even have a hand held one too that I love. I am happy for you Iseektruth that you finally found just the right vacuum, surely it was destiny the day you walked into Target, laid your on her, and just knew she was the one for you so I very happy for you and your vacuum, that you found the one you could give your heart to and really love, for the sake of our carpets that’s oh so important right. I hope you still get the warm fuzzy like you did the day you knew she was the one every time you still look at her, and I really do wish you both many, many, years of happiness together and that you continue to be as much in love as the day you met, man, you make me so jealous I wish I had what you guys have. 💕💞💕💞also I sure hope your neglecting your beautiful shop vac, after all remember she has feelings too and needs just as much TLC from too. Good luck to you and all your appliances.

[@nuttercafe]

Thanks for the lesson!

[@Iseekoutthetruth]

👍

[@bronzechicken4437]

I've never had but one issue in four machines in ten years, I have several from various ages, one bought new in 05, all work fine, the one from 05 had a bearing in the brush wear out, and it actually wore out, I took one from one of the other machines and it works just fine since I'm not using the other one

[@Iseekoutthetruth]

i'll never buy another one, these are over price junk.

[@bronzechicken4437]

Whatever floats your boat, though I feel I've gotten the money in the original out, and the ones I get in sometimes are over 10 years old and have been worry free

[@Iseekoutthetruth]

BronzeChicken maybe 10 years ago when you bought them they were good, but now they are built to break down, over priced garbage.my target vacuum has never given me a problem and it was a lot more cheaper.

[@KANSASIOUX]

One problem I had is that Ace hardware nor True Value had the size of bearing needed. Needless to say I will jus buy a roller from the vac store😒($23).

[@Iseekoutthetruth]

do what you have to do.

[@shameite74]

Man, I must be lucky cause I have only changed my brush once in 12 years and never busted a belt, but I change my belt once a year. I have the xl21 and the magnesium. And I suck up so much hair that I have to cut it off with a razor blade. If you ever decide you dont want the Oreck anymore, send it my way. Lol

[@Iseekoutthetruth]

Since this video was made, I have broken 2 more rollers and 4 belts. It's over priced garbage.

[@alzorama2876]

I have had two Oreck vacuums and have more trouble with them than other vacuum I have owned.

[@Iseekoutthetruth]

+alzorama yup, they are garbage.

[@eleenbaumann24]

I LIKE Orek vacuums. They have bags and filters so all the dust doesn't blow our and when I change the bag (which is not often) I don't have to deal with cat hair or other allergens like you would with a bagless macine, e.g. shrk

[@Iseekoutthetruth]

Over priced garbage vacuums.

[@NumaticVacuum]

They won't cover the brushroll, it is a consumable part that will wear. What do expect.

[@Iseekoutthetruth]

+Numaticvacuum this vacuum is a over price piece of junk

[@NumaticVacuum]

+Iseekoutthetruth They are not all that bad, they are overpriced though I agree.

[@generalkeir5605]

Thanks. Real help

[@Iseekoutthetruth]

Thanks for watching

[@passingtime1595]

The highlight of this video is when his wife walks in at 2:52.. classic

[@Iseekoutthetruth]

that was not my wife, that was my son.

[@skynative6791]

Your comment cracked me up and then his response was even better lol The kid was trying to hide 😂

[@mariavelez8492]

How replace motor on Oreck vacuum

[@Iseekoutthetruth]

dont know I never replaced one before.

[@nathanielaranda8407]

agree they don't deep clean well

[@Iseekoutthetruth]

+Nathaniel Aranda no they do not

[@NewUser-gx3rc]

your right, don't buy a oreck, buy a hoover. oreck tried to rip me off too, the problem with my oreck xl insight is that bearing is made out of plastic, not metal and after a few months, the metal thing that holds the bearing on bends and it is impossible to fix. they need to be sued.

[@Iseekoutthetruth]

They are garbage and yes the rollers are cheap plastic.

[@okiestorm99]

thank u r the vid u helped me out

[@Iseekoutthetruth]

cool glad it could help you out, thanks for watching

[@okiestorm99]

u r welcome hey what do u say if I washed my cloth bag in the washer is that a good idea

[@Iseekoutthetruth]

trash truck vacuum guy I would not wash it in a washing machine, it might tear it apart, hand wash it in a tub is what i would do.

[@okiestorm99]

ok that is more what I would do to I have a brand new Bissell and the Oreck is better

[@verakurz8047]

I was scrolling thru utube and saw th how to fix somehow I knew it was you before I looked at the channel name

[@Iseekoutthetruth]

Lol

[@jameschuke4104]

I have two one is 15 years old

[@Iseekoutthetruth]

I Have 8 Now.

[@jdog20012001]

Buy a used Kirby vacuum. They're about $100 on Craigslist. They are built like tanks and live practically forever.

[@Iseekoutthetruth]

I have one, they are to heavy for what I need to use them for.

[@okiestorm99]

Iseekoutthetruth I hate Kirby lol I have one but there r havey the hose u have to put on its hard and all I love oreack

[@jadealone]

+annacomputerwiz I agree, Kirby's are amazing work horses and definately built like tanks, unfortunately, trying to lug one around at my job was like dragging a small fully armed military tank!! I had to choose either a lighter vacuum or get a different job. ---Hello Oreck!

[@herminawilliams1580]

this is a commercial vacuum. you would think Oreck would make better vacs

[@Iseekoutthetruth]

+Herminaw Williams you would think that right.

[@herminawilliams1580]

I looked into buying a Sanitaire vacuum and I found a used Sanitaire SC689 and I immediately canceled when I saw in a video that there was no HEPA filtration. It was the shoe out bagless but when they youtuber showed how he turned on the vac, you see all this dust smh....so now I'm still searching

[@Iseekoutthetruth]

+Herminaw Williams I just use a regular hoover vav now.

[@herminawilliams1580]

my mom replaced the carpet back in June 2015 and its still shedding like a dog.....driving me nuts. I had a Shark and it was not made for the thick shedding carpet. We have a Oreck X21 and its not made thick carpet, hence is the reason for a commercial hoping it would withstand the shedding

[@Iseekoutthetruth]

none of the Oreck vacs are good for carpet.

[@daveolliemetalhead]

I have a 19 year old model my wife says it sucks the rug too hard

[@Iseekoutthetruth]

sound like you need to get her a newer model lol

[@JayN4GO]

Mine is a newer model. You're right. POS! Who the hell makes a roller pulley like this. The belt hops off way to often. I cleaned the hair from the wooden brush dowel and now it smells like burnt ass hair. I'm sure it's the bearing and housing being clogged and pushed inward. I'd almost throw this thing on the front porch of the dealer and drive away. But I think I'll give it to a panhandler or something when I get my vertigo to go away from all the damn dust.

[@Iseekoutthetruth]

+Glock over priced garbage.

[@passingtime1595]

Glock hahaha

[@barbaraemerson1112]

Hahaha you had me in stitches... now I can repair this POS in a good mood! Thanks!

[@leebutts806]

They’re $12 on EBay

[@Iseekoutthetruth]

Ok

[@jameschuke4104]

22 dollars includes 6 belts

[@Iseekoutthetruth]

expensive.

[@daveolliemetalhead]

Don’t you love the hair on your counter thanks for the information

[@Iseekoutthetruth]

the counter can be cleaned.

[@nathanielaranda8407]

Get a Kirby

[@Iseekoutthetruth]

to heavy

[@nathanielaranda8407]

I under stand I had one for 5 years 2005 to 2010 and It was heavy but I did not care because I knew that It was the Deluxe Cadilac of vacuums but I had to give it up because we got a tiny place and it was too large for it but now I am going to get a rebuilt one soon for reliability

[@Iseekoutthetruth]

Nathaniel Aranda cool good luck with it