Iso-Area Flasher Cube from a 6X6 Grid 🎇 Pure Origami Box

How to fold an Iso-Area Flasher Cube from a 6X6 Grid. This cube has two openable compartments where you can store things, so it's a double-sided gift box! And it resembles a tato, so it's a double-sided origami tato cube! Ooooh... I just discovered something else REALLY cool about this model... Remember the Sliding Seamless Cubes? Well this model can do the same thing but since there are flaps on four sides (instead of just one side), they can hook together like legos to form a grid of boxes! And since the top and bottom both have flaps and pockets you could use these as units to construct any 3-dimensional bitmapped object!
This origami Flasher Cube was discovered by member Sonny during March 2022 Eastern Hemisphere Members Livestream. I was leading the group in trying to design a 6X6 Grid Flasher Cube and my attempt was not going so well, but Sonny went in his own direction and managed to figure out a rather simple clean way to close the top. He thought it could only be used to close the top, but I helped him to see that since it was iso-area, the same technique could be done to close the bottom of the model as well. Design credit also goes to Ritwik, who didn't even attend the Eastern Hemisphere livestream, but it was at his request that we tried design a "6X6 Grid Flasher Cube."
Special for my members I've made a tutorial for a variation I figured out that achieves the double closure from a 4X4 Grid Flasher, which results in a very aesthetic larger cube with no loose flaps sticking out. To join as a member here is the link: / @jeremyshaferorigami .
Sonny's isoarea flasher cube closure technique also works on an 8X8 isoarea flasher or any simple iso-area flasher for that matter, and you can experiment with that! Have fun folding 折纸!
Here are some ways to support me to make more awesome origami videos:
1. Join as a Member to get access to perks: / @jeremyshaferorigami
2. Book a private origami Zoom tutoring session here: www.calendly.com/jeremyshafer
3: Buy one of my books or packages of paper on my Amazon shop: www.amazon.com...
4. Subscribe and hit the notification bell: / @jeremyshaferorigami
5: Follow me on Instagram: / jeremyshaferorigami ... or Facebook: www.ww...
6: Please tell your friends about my channel.
Thank you for watching and enjoying these videos!

[@jeremyshaferorigami]

Remember the Sliding Seamless Cubes? Well this model can do the same thing but since there are flaps on four sides (instead of just one side), they can hook together like legos to form a grid of boxes! And since the top an bottom both have flaps and pockets you could use these as units to construct any 3-dimensional bitmapped object!

[@Ricky_Cubing]

very good

[@jayateyou]

COOL DISCOVERY!!

[@origaminoob1037]

Still can’t believe how you come up with this stuff

[@Priyanaik1983]

WOW THIS IS SO COOL AND EASY THANK YOU SO MUCH

[@diaxzy]

Cool!!

[@Loganroth04]

Mr. Schafer, i got your book ‘origami to astonish and amuse’ as a child in middle school and it truly sparked my love for origami. I remember countless hours trying to figure out the secrets to the flasher, nailclippers, and swiss army knife, as well as the joy i discovered in the moments the paper finally folded into the perfect shapes, whether it be the labyrinth walker, manswatter, or any other project (i assure you this book was one that, despite my cynicism and love for reading, i could find no fault in). You gave countless memories of showing off a flasher, interlocking rings, and many more spectacular projects and i recently found your youtube channel and wanted to truly thank you for excellent memories and continual fun with origami, as well as sparking a lasting joy that i hold to this day. I hope you continue shining light and laughter in peoples lives as you did for me as a child, you do a great thing in this world

[@jeremyshaferorigami]

Awe, thank you Ava, for you heartwarming message! I'm so glad to have played a part in your passion for origami. Wishing you all the best!

[@lizaanne3640]

​@@jeremyshaferorigamiMy origami iso area flasher because I discovered a crane heads for members only

[@lizaanne3640]

I have a special members 4 by 4 grid iso area flasher cube( But I figure it out)

[@thesniperking01]

It's so fascinating how you can turn a single piece of paper into that! Very rare model!

[@bradschmidt4482]

Cool

[@rtnandhusworld]

I like all models, particularly flashers very much. Today, I will try this flasher.

[@fadlurrahman-dz6kr]

Cool! Nice work boys!

[@samsorigamiworld181]

Its really cool👍😎

[@CUBEROFEMBERS]

Please tell which paper I should use for flasher hat! I can’t buy wyndstone anymore! Thank you!

[@jeremyshaferorigami]

Grainy Paper on www.Origami-Shop.com is pretty nice. But more economically speaking.... any craft paper or butcher paper works well for flashers.

[@origamiskills15]

Loved this

[@karmasonamtshering5742]

Whoa so talented

[@gpzzang]

It is so wonderful!

[@ishandaksh3208]

What how you are the best origamist man

[@kristofiszaly4588]

Very good! Will origami cash register. 🙂

[@testx0170]

NICE!

[@jayateyou]

Wow how’d you design it it looks really complicated? Good Job and Amazing Model Great Explaining Too! Happy April And can you do a video anout model designing process??

[@JumbleJumble]

It’s my model

[@jayateyou]

@Richard Irons cool!

[@JumbleJumble]

It actually my son sonny (what a coincidence!) model

[@911xalag]

I love flashers 0:47

[@sameersgeography3316]

So Outstanding

[@chrissego4268]

This was so cool

[@svshhsbs]

Wow, this is cool

[@DaBruhMe]

yo thats cool!

[@nazrindon448]

Thank you jeremy

[@tokitahmid05]

Wow it looks so nice!

[@sheldontang3292]

Well looks like HES BACK WITH ANOTHER BANGER!! I have been waiting for flashers all I did was flasher videos :D

[@moshi1037]

Yey! Another flasher this is so cool i love flashers!

[@911xalag]

0:47 yo,I love it

[@origamiguy043]

Very cool flasher! I like it.

[@reynaldopalacios6881]

woooow what a beautiful flasher

[@fadlurrahmansingapore8243]

Oh! I see it is flasher cube! I love it! I want it!

[@fnj17206]

Cool!

[@giaodang2301]

Finally another flasher! Jeremy can you teach us how to fold the rocket flasher from the cube flasher tutorial pleas?

[@giaodang2301]

Opps i meant please

[@shhh6714]

And you meant oops!🙋

[@anitawong846]

I am a new member

[@jeremyshaferorigami]

Welcome! Thank you for joining membership.

[@AK47_cc]

Nice

[@TheOrigamiGenius]

Kid: I invented a flasher Me: A kid's smarter than me

[@Internet_user-_-]

Hi jeremy i am on my moms account and i haven't done origami in a while and i would like to get back into it. I am going to fold this model than go to my dads account where he bought mebership for me and fold the 4x4 grid version. thanks for being a good consistent uploader. I like your videos!

[@player3572]

You should have think twice Jeremy Shafer! Because i made the 4 by 4 grid iso-area flasher cube without seeing the membership.

[@jeremyshaferorigami]

Excellent that you were able to figure it out. I like to encourage my viewers to exercise their problem solving abilities.

[@player3572]

Oh! I forgot it but.... i made a your membership stickman. Without seeing your membership again......

[@troycreator.8407]

hello jermy i like flasher vortex super cool its MASTER PEICE

[@reynaldopalacios6881]

jeremy i never miss one of your videos

[@boomblastbit]

Make something that spins and you can race them and decorate them

[@deepakarora290]

Pretty interesting model! I'm gonna make it now! Thanks😀 Also, can you try designing another car, like your Jurrasic Jeep....

[@lesartsdeaissatou9485]

It's very nice

[@moditorplayz]

Can you try to make a camel spider?

[@rm8584]

Soooooo cooooooooool

[@kinglykiaanzz8465]

I really looooooooooooooooooooooooooooooooove your origami!!!!!!!!

[@hanshikorigami4552]

Jeremy, I have made this flasher with an 8x8 grid and it works great

[@alijoseveraciertaveraciert8576]

Gracias por los tutorial es aprendí a hacer el cilindro con estos videos en 2020

[@Abid034]

When you opened the 4 by 4 version of the cube, I paused the video and learned how to fold it and I'm not a member,he he

[@bradschmidt4482]

You amaze ,e with all of your origami

[@bradschmidt4482]

You amaze me with all of your origami

[@OrigamiEric]

Very nice 👍👍

[@JaydenTheSaigonLover]

So cool! I can make this from an 8x8 grid, or a 12x12 grid.

[@akshhaeysaktiveel0121]

I am your fan

[@OrigamiWizard]

epic

[@JustAaron-251]

Hi!

[@OrigamiWizard]

@@JustAaron-251 hello

[@maxjokson8933]

I actually figured out how to make the 4×4 grid without being a member

[@JumbleJumble]

Sonny made a diagonal iso area flasher so yeah

[@fadlurrahman-dz6kr]

7 inchi square! Not 6 inchi square! Jeremy!

[@fadlurrahmansingapore8243]

I love you Jeremy! 😍

[@origamiorigami2510]

wow👍👍👍👍

[@minchelanimations650]

How do you design flashers? Like the supreme or deluxe? (Sorry for commenting this on so many videos, I really want to know)

[@reallyvk8903]

Can u make it out of 12x12 grid?

[@jeremyshaferorigami]

Yes! As I said in the description this works from any grid iso-area simple flasher. You can also do it form a 5X5 non-iso-area easy flasher, and you'll end up with four flaps that overlap twice to close the box, or from a 7X7 non-iso-area easy flasher and the four flaps will overlap three times before interlocking to form the closure of the cube.

[@Wintagess]

How do you get the 10 inch square kami paper you use?

[@jeremyshaferorigami]

I get it at my local Daiso store. It costs $1.75 for a package of 25 sheets! You can also get it from Aitoh company. Search for Aitoh OG6 or just click this link: www.amazon.com/Aitoh-OG-6-Origami-9-75-Inch-100-Pack/dp/B003V79L7C/ref=asc_df_B003V79L7C/?tag=hyprod-20&linkCode=df0&hvadid=194013412954&hvpos=&hvnetw=g&hvrand=12339836880037758906&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032078&hvtargid=pla-315634899556&psc=1

[@JumbleJumble]

Folded crease pattern less caterpillar flasher

[@trungthanh3256]

Yes,it's easy

[@theonlyhenrybar3084]

How in the world did you crumble it 😮😮😮😮😮😮😮😮😮😮

[@sanagaAK]

Nice sasisfing

[@debbielackey9053]

I like it the flasher from Alexander

[@ganggamertamil]

Super

[@JaydenTheSaigonLover]

I can make a 4x4 iso area flasher cube without being a member!

[@diaxzy]

Ooooo! super!

[@MARCUSWONGSHENGRONMoe]

can you please make a 16x16 grid one?

[@metal_guitarist]

I created the 4x4 model without membership

[@HatsuneMikuSan_1]

Hey Jeremy shafer, I have not been able to do the second side and pls make a tutorial where u can show the second side a much simpler way

[@jeremyshaferorigami]

Try to remake it. If you were able to do the first side. You should be able to make the second side, because both sides are the same. It's iso-area.

[@TurtleTinkelTurtelTetusEltrut]

oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo will you teach the sliding technique?

[@kellieconnor4319]

I figured out how to do the 4x4 grid one 😂

[@DxrkWasTaken]

Can u do easy slinky pls

[@ECY777]

@JeremyShaferOrigami this is like the iso-area flasher you taught one decade ago

[@jeremyshaferorigami]

Ya!

[@bridgeportydp-risingoaks547]

Can you make a origami transforming banana?

[@jackff6849]

Big fan Jeremy pls pin this comment

[@thangtho7657]

Can you do some more "Flasher" ?

[@thangtho7657]

Just one more

[@sanagaAK]

It is like your previous video

[@nonexistentboi]

Noice

[@anitawong846]

Hi

[@bradschmidt4482]

Can you make another origami flicker

[@fenfensedogan1009]

Jeremy can you make a origami easter tutorial

[@JumbleJumble]

I am sonny in dads profile

[@reynaldopalacios6881]

jeremy can you do an origami flicker of five nights at fredys

[@sushi_guylol2644]

wow dis is not rly cool but t supa cooll!!

[@jeffreytheaxolotl9133]

try making a tessellation cube

[@jeremyshaferorigami]

If you fold this model a bunch of times, they can link together like legos to form a grid of cubes, and they can even lock on top and on the bottom of each other.

[@sanyzukan999]

Can you make anotherflasher

[@ecrcroadto1ksubs111]

Hey jeremy can you make a paper origami crab plsss

[@markomarkovic6137]

Fourth

[@jackff6849]

First viewer

[@MrNitro-kp3ku]

I am an indian and i made paper connecting cubes (no flasher)

[@jonesthe1st840]

Weeeeeee

[@Ps_addict]

43rd viewer

[@AliciaHernandez-nk4rj]

I can do it

[@pratyushgolchha503]

Plzzz make origami tesselations

[@TTVNINJA0612]

First

[@6c39veermanepatil9]

Hey please make a origami optimus transformer....

[@lamstupid9128]

i want to fold too

[@lamstupid9128]

glock gun origami tutorial please

[@wongolivia157]

me folded 2 times

[@reynaldopalacios6881]

jeremy what is the id of your meetings

[@jeremyshaferorigami]

Hi Reynaldo, Thank you for joining membership. Welcome! All the monthy members livesteam info can be found in my Community Tab posts. The next is livestream is April 23rd. I'll post the details again a few days before and then I'll post the join link a few minutes before the meeting visible just to members.

[@reynaldopalacios6881]

hi jeremy I am Adrián but I have my dad's account and I like your videos