IT RIPS NOW!!! | CV TECH PB80 CLUTCH ADJUSTMENT / REBUILD

[@Necromaniac24]

I’m 39 and just got my first sled 14’ cat xf7000 sno pro with factory installed turbo and 1670 miles, not sure if I’m in over my head being a beginner but I like a challenge so far so good with no problems,, clutching was done to it before I got the sled, when it warms up I’ll learn to work under the hood

[@208SledHead]

I love these tech videos! I'm a wrencher myself and can't WAIT to get a sled again soon! Thanks for all your work boss!!

[@syxxes]

You bet! It's an awesome sport!

[@jimbob7072]

Get a artic cat i got a 2021 alpha fricken thing rips I might do some clutching and put a turbo in it

[@jimbob7072]

@@syxxes what head light did u use on that m8

[@syxxes]

@@jimbob7072 kzbin.info/www/bejne/oYjVamiXbZdkp7c

[@jimbob7072]

@@syxxes ok thanks i am gonna put that on my 2014 snopro

[@Eighty8Fitter]

Your video basically confirmed my purchase for my 98 zr 600 that’s had two failed AC clutches as well!!!

[@corbinschad1]

What a blast from the past. Almost exactly like my comet on my first sled. 74 Ski-Junk TNT 340.

[@syxxes]

Yes! They are a very similar clutch,

[@DanMX2112]

Love this, interesting testing on that clutch. Love the wrench vids!

[@syxxes]

Thanks! Glad you enjoyed!

[@cutznfadez4683]

Thanks for posting these couple vids about this clutch ....actually just ordered one myself after watching your other video about it..I appreciate the feedback bro

[@syxxes]

It's been great so far!

[@reddirtrider6190]

Great video, I have a cv tech clutch in my zr600 it hasn’t been hitting the rpm I was liking, this will definitely help me this season to get more out of it.

[@Eighty8Fitter]

I have a zr 600 as well and I will be installing a new cv tech clutch on it too. How do you like it? I’ve had two Arctic cat clutches fail as well, done with that junk!

[@adamgsxr13]

Just blew my spider on my 2015 zr8000 so i order this CV tech clutch cant wait to try itn

[@syxxes]

Hope the calibration is dead on! In most cases it seems to be. Mine I felt was a little heavy, but all solved now!

[@406Bean]

Hell yea, love your videos ride vlog to shop talk y’all running a nice channel. Hope to be picking this clutch up by the end of an already shit snow season. Keep it up.

[@syxxes]

Lots of people seem to be going to it after I did!

[@lloydmarche7263]

Well done. Thanks for the info on the clutch. I have been looking at options. 🙂.

[@syxxes]

Glad to help! I kinda took a shot in the dark with it. wasn't much info out there on it.

[@welderteach]

I just got a PB 80 this week for my wife’s 7000. I can’t wait to see if the engagement is as nice as yours

[@syxxes]

Hopefully!

[@darreng3734]

How’s your pb 80 been on your wife’s 7000 so far ? I was looking at the same clutch for my 14 7000

[@welderteach]

@@darreng3734 so far it’s been excellent, almost 2 seasons on it, smooth, quiet and trouble free. I put 1 on my 998 turbo last season and it’s been impressive also far

[@welderteach]

@@darreng3734 I’ve got a comparison video you can check out if you’d like on my channel

[@blairaudio]

I installed it on my 2011 HCR 800 and I honestly can't believe more people don't use them. I will never go back to a cat clutch again. 2000 miles on mine and never opened it up.

[@syxxes]

I agree! The manual says 5000km should be first inspection. That's 4-5 cat clutches for me!

[@johnjackson9564]

We have a 2012 AC M8000 snow pro limited. We have seen a couple that say they are for the new 8000. My question is “What is the difference and will the new ones fit the 2012?

[@danielr.lariviere4917]

Fantastic walk through Video - Very Informative and helpful - Thanks!

[@syxxes]

Glad it was helpful!

[@mikespooner63]

Thats a sweet looking sled

[@syxxes]

It's comin together! I keep doin more to it, instead of buying a new one!

[@draperscott7550]

Hey really enjoy your videos ..just wondering how the CVTech primary is holding up?

[@syxxes]

Gonna be doing a long term video on it next week. But in short: Great!

[@dwayne8812]

Great video , keep them coming .👍

[@syxxes]

Thanks, will do! More on the way!

[@drshazam8722]

Old whitey should be a subscriber giveaway when you get your new sled. She's a well loved M8000

[@syxxes]

I wanna keep that thing in the fleet!

[@pyrocat1640]

8050 rpm is where this engine likes to be stock. 8100 max after long pull. Makes its tq at 7850/7900

[@genxrider76]

Great video!!!

[@justbraaapit2311]

Make some jump vids bro. That be sick. Love the sled videos bro

[@syxxes]

I'm not a jumper, but I'll try!

[@ArcticJeff]

Quick question, do you use the stock Cat clutch bolt with the PB80, or does it have its own proprietary clutch bolt?

[@Sledderrider]

My father and I have always measured our weights and sanded them to within .1 gr of each other. Little OCD lol.

[@syxxes]

They'd come that way in a perfect world!

[@chripopper]

Thanks for this video! My dealer only has uncalibrated clutches in stock. The weights i can see in this vid but anyone know which spring would be suitable for -12 m800 ?

[@torchind]

really liked this video

[@arloslab3469]

please we beg you do a video on the phazer!!!!!!!!!

[@billmichalchuk5453]

Great video

[@nicklutsenko9740]

Can you provide a link to where you got the clutch from as I am looking into getting one of these for my 15 m8000 Thanks!

[@ronaldlucas4036]

Loved where you located the license plate 👍

[@syxxes]

Hidden in clear sight!

[@isaacbeauchamp9038]

Nice looking sled

[@syxxes]

Thanks 👍

[@hondarider1112008]

if you wanted, instead of pulling the clutch next time, just tip you sled over and change the weights with the clutch on it still

[@jesseholappa2338]

What is the number for this powerbloc 80 that will fit my m800?

[@koreyparent7093]

for 12-13 (assuming since you said 800 not 8000) it is showing 1100-0311. I cant find it anywhere in stock, if you do please drop a reply.

[@TaylorByers4444]

So what is the size of the nut on the clutch? Currently trying to take mine off but no idea on the size of the big brass nut and you didn’t say in the video.

[@sandych33ks1]

You should check the runout on that crank . That is a huge power killer. Anything over 5 thou really will take a toll. This has been an issue with Arctic cat sleds for years.. Even on new sleds but if you have blown a belt etc it can sometimes take a bad hit. I have all my cranks balanced and welded.

[@tegowner]

I just bought a '14 m8000 and I try to understand what you mean. The crank may have too much radial play from the end where the clutch is? Is it a common problem? And what do you weld exactly...you oversize the crank and fit thinner bearings? I'm new to this wonderfull sport. Thank you

[@syxxes]

You'd have to send it to a machine shop to get it welded, it'd be a specialty thing.

[@tegowner]

@@syxxes I'm not intending to do it myself :-P I'm trying to figure out the weakness and to understand what how sandych33ks1 fixed it/if it can be fixed for good. If you rebuild the crank to oem specs, is will still fail :-( I thought those suzuki engines were almost bulletproof (for a 2 stroke perspective) Thank you for your input Syxxes.

[@sandych33ks1]

@@syxxes If you do some research you might be surprised how many do it. It makes a big difference. Those Cat cranks get taken out easy sometimes with a badly blow belt. I had a new factory sled F1000 out of the box out 11 though. It was a pig. I could of warrantied it but I had it balanced n welded. It was night n day. The Ac f7 in the day were the same . The crank run out being over 5 thou draws big power loss. I had a customer on the dyno with a f7 out 20 thou and it wouldn't make 118 hp .Cat warrantied his crank. .

[@garysmith643]

How do you adjust belt deflection ? I dont think your new clutch has the bearing ? Awesome vid!

[@syxxes]

Just like you would normally! 🤟

[@colbyrosin427]

Have you weighed both clutches? What’s total clutch weight of the power block 80 vs the stock cat clutch?

[@abcarp1302]

Can you still wrap a rope around that clutch to start the engine?

[@syxxes]

You probably can. But you'd need to devise your own tool for it.

[@игорь-у3ш1й]

Hello. Tell me the cvtech variator is good? Or original 0746-435 is better than cvtech.

[@user-pc5dk7nn4y]

how do you know which cvtech clutch to buy for your sled?

[@gunthro2002]

Great tech video!! Side question, what do you run for primary to secondary offset?

[@syxxes]

The alignment process for this clutch is a little bit different. It actually makes use of a straight edge.

[@goatboss3616]

Idk on my 13 pro climb had it a few year no cluch problems but on my spare sled a 07 m8 I got 4 primary cluches on stand by for it

[@syxxes]

Glad it hasn't given you issues!

[@2007dalin]

does the secondary still have spring rotation adjustments on these? on the older cats it was a quick way to drop or raise a few hundred rpm

[@syxxes]

You can get a helix that you can clock the spring anyway that you want, otherwise no!

[@stukorth9097]

Do the weights need to be put back in the same place you took them out?

[@Sevoled]

keep up like that !

[@syxxes]

ya!!

[@ryangaulton1542]

I have a question about my skidoo it's 2001 mxz 800 121 factory with a 144 summit skid, gears, chain, and a 2 1/4 inch lung on the track and it has a "good" 2002 mxz 800 primary clutch on it ( sorry for being so long and the info my be important) I live about 900 m from sea leve and the engine starting rpm is 3000-3400 Rpm and the clutch engagement is around 3500-4000 rpm now the rpm do lower after ideling for a bit ( warm idle about 1400-2000 rpm )but the main issue is it only revs to about 7500-7800 rpm I heard it's supposed to go to 8250 rpm how can I fix it i think it may be the wrong belt

[@blopdolf7365]

Check dynamos Joe’s site or KZbin but sounds like something with the ramps/rollers or weights

[@ryangaulton1542]

@@blopdolf7365 the clutch that's on the skidoo I was told is a good clutch by my dad the owner of the 2002 mxz it can off of and he insistes it's good but I've tried to get the belt off a little while ago but I couldn't get it off I ever try to use a screwdriver to get off and nothing that's what I think it is but it also have a bad exhaust leak on both cyclnders were the y pipe attaches. And thank you for the tip I'll see if I can someone who know more in my local area to look at it

[@UselessProductsAreCool]

Do the springs in these ever go bad or wear?

[@jonathans5318]

You really should mark the location of the weights, the clutch is balanced and as you have shown there was a slight difference in each of them

[@csolie2cs]

What elevation are you at

[@user-pc5dk7nn4y]

what CKX helmet is that you are using with the pop out front?

[@syxxes]

CKX Titan!

[@IIRiPII]

Hey man any codes or discount on the ckx helmets looking at purchasing 1 beats taking it off every now and then

[@syxxes]

We've been trying to push that, but, unfortunately, sorry, no discount code at the moment!

[@gokuvegeta4378]

Do you have a part number

[@BeyondResolution]

What Can are you running on the m8?

[@syxxes]

Running a jaws can it

[@extremeoffroad-snowmountai9084]

👍👍👍🙏

[@cutznfadez4683]

Do you still have the stock skis on there 🤔

[@syxxes]

I've got a set of white CAs on there right now

[@IVIGB]

Have you had any issues with it die out going into reverse?

[@syxxes]

Nope. But low compression is one of the things that can cause that

[@IVIGB]

@@syxxes I don’t think that’s the issue it was working fine up till I swapped clutches sled doesn’t have many miles like 1500 wondering if it’s because the balancing ring didn’t get put off the old clutc

[@johnrowe8873]

Great Lid

[@syxxes]

Thanks bro.

[@kadenreynolds3137]

does the sled have drop shackles? ass end sits very high

[@syxxes]

Oh this things has had all sorts of stuff done to it. Infact there's a whole playlist! kzbin.info/www/bejne/hZ3OhnpvZdJsmNE

[@danielkatairoak4015]

I never seen that clutch on a m8 before. Looks weird to me

[@jessehill7859]

U should paint ur spindles black man

[@syxxes]

Yeah, that or white!

[@Valenlukin]

На сколько увеличились обороты?

[@carsondoonanco7877]

Hey man is this still working for youu?!

[@syxxes]

Yup. Just had it out again for another 100km

[@kadecooper246]

What is the cons of this style clutch?

[@syxxes]

More available power, smoother take off, ability to do full rebuild. Have yet to find a con.

[@kadecooper246]

@@syxxes is it more narrow (engine to body panel) than stock as well?

[@syxxes]

@@kadecooper246 narrow and lighter.

[@kadecooper246]

@@syxxes sold

[@sleddingfarmer8692]

Only real con to the pb80 is a slight lack of tuning ability (or at least some complain about that... Even though they seem to work great anyways). Also, they seem to run a little warmer because they're so enclosed and smooth... Less air flow. Great clutches though. 7500 miles on my doo 1200 pb80

[@B230f]

Wheres the phaze

[@syxxes]

Parked under a snow drift xD

[@chrisborns5972]

So whitie is down on power so you need to remove weight... Time for a new machine.