I’m actually running 2 of these PB80 clutches. 1 on a zr7000 1049 triple 4 stroke and the other on a xf9000 998 turbo. I will say they have been smooth as silk. They really preform and have been completely trouble free!
@matthewlochmann9765 Жыл бұрын
Based on watching you put the CV clutch in white night two years ago I bought one for my '11 crossfire 800. I love it! no more spinning the track on the trailer with the "rough" engagement. Easy to adjust, but came pre-set to my specific sled, bounced up and down but came back to how they sent it to me. Couldn't be happier, thank you for leading me to it!
@Alero2k4 Жыл бұрын
My dad had just put one on his m1000 before a trip to island park and you are spot on. The engagement is crazy going from post and fly weights. It’s literally buttery smooth and the clutch worked great!
@felixrouaud1 Жыл бұрын
CVTech has been used for a long time in Québec on trail sleds and everyone love them. Glad to see it has been good for you too!
@lonnywhiteman3858 Жыл бұрын
I am still running the AC clutch, changed spring to a Dalton Blue Grey spring and it has changed the wear and tear on Cat clutch. Now had nice engagement like a Team clutch. No wear on rollers or weights. $35 fix
@Thelemorf7 ай бұрын
Except the spiders break all the time..
@greatalaska6429 Жыл бұрын
Those new polaris's been blowing up clutches left and right. Im on my second clutch on ole 2012 proclimb so I know the struggle.
@brodieyyr6 ай бұрын
Installed the PB80 on my Bearcat Z1 XT, very impressed with it.
@joshloder7948 Жыл бұрын
the best clutch out there... !!!!!! have one with 4500ish km on it.
@SuperBigdanno Жыл бұрын
You can also fine tune one of those shim weights with a drill bit, say if you find that taking one out is too light but put it back in and its too heavy. Can make a differece with just a little taken out.
@ajbertelson9871 Жыл бұрын
I talked with Matt from MCB performance about the PB-80 on my T-cat and he said they have more that a few with tunes and they have been fine. He also said its a great clutch, its quiet, it runs cool, but don't ever take your side panel off because its as ugly as sin when your buddies ask why your sled is running so great.
@markdephilippo14048 ай бұрын
Lol
@markdephilippo14048 ай бұрын
Lmao
@joshgessinger4509 Жыл бұрын
Interesting clutch there. I have a few cats one is a 2010 ext Z1 turbo with 300 hp tune. I run it on the 240 tune mostly though. Blew belts like crazy at first. Had to cut about 1/4 inch off back side of secondary to align clutches. Now it runs flawlessly had to do my own clutching. Use to clunk really bad so i put a 125-340 I believe spring rate in the primary. Anyway no more clunk engagement clutching is probably about perfect. Might try that that cvt tech clutch. Have a stm secondary already to try. Stm primary is lot of money so idk. But anyhow great video Thank u
@gentilejoshsaved1646 Жыл бұрын
awesome. I put one on an 1160 cat twin and it worked very well. I would suggest a stiffer spring and leave the weights. Its nice to get more weight on those Suzuki 800s they like it.
@leftyeh6495 Жыл бұрын
If only they could produce enough to meet demand. My buddy has been trying to find one for over a year for his m8000
@matthewlochmann9765 Жыл бұрын
I waited all summer two years ago, just kept checking stock levels and jumped on it when they had one...worth the wait! have 2K miles on since I bought it, working just as good as the first time I hit the loud flapper after install.
@e-mu7fg8 ай бұрын
@@matthewlochmann9765привет Мэтт. Сколько на сегодняшний день прошёл миль, твой PB 80?
@yamaha382 Жыл бұрын
Hey Matt, you should def go back to your prev intro song! Gets a guy way more into it!!!!!
@kerwynthomas4923 Жыл бұрын
Great video Matt, my m1100 is in the shop right now getting the clutch fixed again.
@draperscott7550 Жыл бұрын
Hey Matt awesome review on the cvtech primary.. I’m currently thinking about doing an install on my xf1100 2stage turbo..love the videos of you and the gang rippin keep it up
@nagadsby941310 ай бұрын
Excellent video! Thank you
@Ryan-ou4je Жыл бұрын
I put one on my rzr. Works awesome
@stevenw85359 ай бұрын
Hey all , and Mr Syxxes..... Any one had the rubber attached to the cover come apart and parts of it come out? Found pieces in the belly pan and finally figured out where they came from. Only 200 miles on it. Sure it would cause an out of balance condition and probably do the crank bearing no good. The little screws on the cover hold a rubber dampener or something to the cover at the base. Has this been a problem? Tightened down to tight at the factory? What is the purpose of the rubber?
@mustard69 Жыл бұрын
love the vids, you should bring back the trikes🤣🤘
@ArcticJeff Жыл бұрын
Does anyone know if CV Tech makes a PB clutch for the newer Team primary's with the idle bearing on the stationary sleeve?
@douglahucik37785 ай бұрын
First of all I will say I really enjoy watching your videos they're very informative. I have a question for you if you are able to help me? I recently just put a power block 80 clutch on my son's 2013 Arctic Cat 800. I kind of just based it off of what you were doing because I'm tired of buying cat clutches LOL. I need some assistance if you can give it to me regarding you the weights that you used. His sled came with 67's originally on the factory clutch. The power block comes with 12 weights and they are telling me they are 5.5 Oz per weight which would give me 66 total. The most we can get out of it right now is 7400 RPM. I know by watching your video I believe that you ended up with 10 weights which would give you 55 Oz. And you were topping out at 8150 RPM. I just wondered if you stayed with that weight ratio and how it worked for you since you're sledding his letter almost identical. We live in Kamloops and we are usually riding around 5,000 to 8,000 elevation. Thank you
@gtileo Жыл бұрын
I don't know how the PB80s are on the Cats but on the Ski Doo 4 strokes, I know they are hard on belts, they build up alot of heat. Easy maintenance and a good shifting clutch but many people replace the belts every year just as a preemptive maintenance
@SuperBigdanno11 ай бұрын
If your blowing belts then maybe try to add some weight to the primary, my guess is they are running hot. Also make sure alignment and deflection is correct.
@Eighty8Fitter Жыл бұрын
I just put one on my older ZR 600 and what a difference. I did find out that my clutch was calibrated heavy when I installed it too. I plan on putting one on my 18’ XF 8 to smooth out the bottom end between 0-25mph. I plan on making a few videos on this clutch too.
@WindCB176 Жыл бұрын
put one on the other day got 3 rides on it and under heavy back shifting cause my secondary bolt to back out...not to sure whats going on maybe its more secondary but i've red lock tighten my secondary bolt in and will still do it. Last time it happened i helied my sled and and now need a secondary and jack shaft(stripped the splines)
@darreng2639 Жыл бұрын
Awesome seems like a great clutch really sucks you get so little out of arctic clutch
@DarthCeadus117 ай бұрын
Anybody running this clutch, did it solve the problem of the sled in reverse ? I have a 2013 F800RR when I put the sled into reverse it binds up the only way it works is to get off the sled. I did a Google search and it seems like a pretty common problem with this sled .
@DanRolex6 ай бұрын
What’s your opinion on the pre 2016 arctic cat clutches? Can’t get a cv tech clutch for 2014 El Tigré 6000. Is it worth getting a clutch kit for these old bricks?
@gregmulfort9577 Жыл бұрын
Ordered a catalyst M today
@mattlabrecque1864 ай бұрын
Does this clutch move in and out without spring tension? I just bought a 2015 skidoo summit with one of these clutches on it. The sheaves go back-and-forth with the belt off by hand.
@fcscooter Жыл бұрын
Matt I wanted to ask your expertise on something. I just ordered my son a 24 arctic cat blast M4000. What upgrades should I be doing to that alpha rail to make sure this sled lasts through my kids growing up? Thanks for your help. Love your crew and content you guys are awesome!
@corylebo3907 Жыл бұрын
Skidoo issues right now r crazy chain case
@mikegatherall3774 Жыл бұрын
Ordered one for 800 pro rmk to try
@elksheds205 Жыл бұрын
Helpful vid. Been looking to buy a CVtech for my 2012 m8. Can’t find one.Any tips would be appreciated
@trevorhoward436710 ай бұрын
where can I get a primary clutch for a 2007 skidoo summit x
@DrainReaper Жыл бұрын
Just got mine 2 weeks ago love it but I have a good question 🤔 how do you put a rope on the clutch to start it if pull cord and or electric start is broken???? 🤔
@Thelemorf7 ай бұрын
What spring are you running and what rpm does it engage at?
@Goober4884 Жыл бұрын
Have this clutch in my 2013 F800 TH and love it. Why not remove the ring weight for a lighter clutch and quicker response?
@SuperBigdanno Жыл бұрын
Quite possible that is on the clutch to help with crankshaft harmonics.
@Goober4884 Жыл бұрын
@@SuperBigdanno I thought that as well but CV Tech said it was not required and just adds rotational weight.
@devinlarsen110310 ай бұрын
Thanks for this video i want to change mine out on the 14 snow pro 8000 but wasnt sure which one it was.. does it come with instuctions on how much weight to put in for the altitude you ride in ?
@microangle Жыл бұрын
what clutching do you have one the alpha?
@calmthestorm8808 ай бұрын
hi Matt nice video i have a 2014 sno pro 500 cat will this cvtech fit and if i buy one does it come balanced?
@stevenw8535 Жыл бұрын
I see them available on Ebay from Motorhead zone. Not sure what they mean by precalibrated. Are they just doing weights or maybe a spring??? Have a question in to them. '10 M8 HCR 153" 3-6K elevation.
@brunokerkhof27228 ай бұрын
Hello, so when you first installed the PB80 did you use the same alignment bar and specs from Arctic Cat?
@scottd8555 Жыл бұрын
Do you know if cvtech has a clutch for the ctec2 with that roller bearing on the inner shaft?
@jastube1 Жыл бұрын
Will the Powerbloc clutch fit the new AC Catalyst..?
@iancampbell1664 Жыл бұрын
My PB80 seems to run hot, it would burn your hand to touch it after about ten minutes 20 minutes of riding.
@SuperBigdanno11 ай бұрын
Add some weight or a lighter spring. This is of course as long as all other components in the sled are all good.
@aLarson7 Жыл бұрын
First 🤘🏼
@lancemontigny4109 Жыл бұрын
Fact…a PB80 on a skidoo 850 will shatter the spring cup if ur running 6500-7500rpm routinely…cost me a 185$ taxi ride
@lancemontigny4109 Жыл бұрын
Same clutch on a 1200 ran 8700 miles zero issue
@joe964 Жыл бұрын
How much power can that clutch Handel? Can I install something like that on my 300hp turbo? 2016zr9000? I’m always worried about the primary I hear of them exploding in messing peoples feet up. :(
@12VHotrodder6 ай бұрын
they really only say they will go to around 280-290 hp over that TAPP or SMT would be the go to
@MarkDulisse Жыл бұрын
You busted a belt a week before this video ? Clutch not good then or aligned. Should not be busting belts
@Rick-kq2vg Жыл бұрын
Best upgrade to give a arctic cat is to trade it in for a skidoo 😁