IT'S SO CRYSTAL CLEAR!

[@coop_coop007]

Think they are brilliant. The only thing i would change is at the point where the leg meets the underside of the seat. Where the leg diameter is smaller it looks a bit odd as the angle of the leg leaves an uneven shoulder. I would counterbore the hole in the seat base to allow the full leg dia to disappear into the base, and then the smaller bore carries right through and exits for the wedge to go into. Really small point on an excellent piece of craftmanship.

[@merittoutjian]

I was wondering the same thing only I didn’t know the solution so thanks for detailing that

[@TheRand0mHer089]

"Yeah whatever this is fine" are my words to live by.

[@ManhattanE]

I love that you can see the leg connections on the seat!!!

[@mai_world]

Beautiful piece!

[@dubi01]

just beautiful.....

[@bikeridernz6169]

Beautiful design. Love your personality!

[@TotalBoat]

One of our fav builds! You did an awesome job!

[@asktheraccoon]

You need a shirt that says "okay, so" in the front and "whooooooooooo !" in the back.

[@xlxDxlx]

Beautiful work. Top to bottom there's just a very dynamic look to it - simple form but so much detail in the texture.

[@BobAmarant]

Cool project. I would have used a Forster bit on the holes, glad the spade bits didnt chip out on you. Love that new lathe, looking forward to projects with it.

[@mikedurkee7296]

Happy first Father's Day!

[@brunopmcosta]

Heres a quick suggestion, next time you could try ditching the clamps on the pour. Try using a thick CA glue to temporarily stick the wood to the moulds, then pour the resin 😉

[@warpspeed9877]

Great! I would like to see the legs underside cut at an angle so they could fit the flat surface.

[@thetable123]

Beautiful!

[@kieronknott8741]

Congratulations on the birth of your daughter

[@miquerto]

Thanks for sharing. Love watching your videos because you share the ups and downs and also make really cool shit.

[@eggsngritstn]

Great tips and a well-executed project. I wouldn’t have thought about the epoxy middle making a difference on the lathe.

[@sgsax]

These look awesome! Thanks for the walkthrough on this one. You've done it before, but it gets better every time. Thanks for sharing!

[@MHanes-m4f]

You can make holes add small lights to the scrap apoxy and make a sculpture.. could be xool..

[@alphonseav986]

Awesome piece. I really like the opposing pattern of the top of the legs on the seats surface.

[@craigcorbin4098]

Amazing brother, love this format of video!

[@taleandclawrock2606]

Great table leg jig! Yes for vid about that please.😍 The stools are great, super trendy.

[@321-sleep]

THE TABLE SAW JIG IS GONNA GET ALL THE OLD SCHOOL WOODWORKERS BLOOD PRESSURE UP. LOL 😆

[@simonschulten3879]

So, when are you going to make a video about working with regular analog poxy as opposed to the fancy digital e-poxy you always work with? :)

[@EDDhoot]

:O Drum kit and stool out of snapped boards would be sick, maybe just a snare. also purple to cancel the yellow bro

[@michellekeith108]

To cancel yellow you need purple not blue, blue cqncwla out orange. Great wee stool 😊

[@archaicruinx]

Great job man! The little bubbles are no big deal in my eyes!

[@NVOutsider]

The stools, like all your projects, are beautiful. Plans for the table saw lathe jig would be nice.

[@sac58999]

As an FYI: Izzy Swan (another KZbinr) has a whole build video on such a jig...I think Ben previously mentioned that was his source/inspiration but could be mistaken. kzbin.info/www/bejne/eqvLZ2yFaMSGbKs

[@NVOutsider]

@@sac58999 Thank you, as you mention it I remember seeing it.

[@Nico-en9qk]

the scream in the first minute made me subscribe lol

[@jimrosson6702]

Very cool idea love the way they came out great job

[@chadbalkwill6025]

The concave on the seat looks real good

[@JOEGGGJOE]

Wow. Amazing stuff. My concern with working with epoxies is the yellowing of the epoxy over time, especially in sun light. Have dealt with carbon fiber in direct sun light outside. I spray a 2k automotive clear to seal & give a uv ray protection. May be over board for your use age.

[@team_rex]

Damn I love your work. Thank you for sharing with us ☺️

[@kevins1242]

I saw an Izzy Swan infeed table extension!

[@sac58999]

I noticed that too. He also uses Izzy's jig for the stool legs (I think he credited Izzy for that previously).kzbin.info/www/bejne/eqvLZ2yFaMSGbKs

[@kevins1242]

@@sac58999 I saw Izzy's video on that, but wasn't 100% sure it was his design

[@sac58999]

@@kevins1242 not sure if it’s original to him (Izzy) but that’s the first time I saw it-no pun intended, though it probably should have been.

[@peem1244]

Hi Ben, hope you are well. Super video, as usual. You didn't mention the tall three-legged stool at the end. The legs on this one caught my eye as they remind me of the leather handles on my Estwing hammers/axes. Maybe you could make some skateboard handles for your lathe tools? Thanks for sharing. Stay safe and keep up the awesome work. 👍✌

[@joshporter4912]

I'm pretty new to your channel so not sure you've allready done it but I rekon a bowling pin or even a bowling ball would look sick as

[@Jechidat_Oketz]

Awesome Work

[@doriswlongAgoandfarAway]

I love that whooooooooooo

[@TeddyWalla]

great video!!! can I ask, why do the legs need to go all the way through the seat? thanks and keep up the good work!

[@FluePeak]

Hey man, instead of clamping it down just use double sided tape. Especially 3M's their are really strong or use some typ of hot glue in the bottom.

[@forby_]

Man, that is cleeeeeaaaaaan 👌. Great work!

[@Applez357]

Looks like the stool is smiling 😊

[@donnecheli2721]

Wooooooooooo

[@frijoli9579]

Really cool looking. Curious about the strength of epoxy legs.

[@brandonsmith666]

you ever do woodworking with “regular” lumber for clients?

[@3rd_stall]

One time for me. Pause in a different spot when you say “OK, So” to sound really excited about Cheese. “Oh, Queso!”

[@boldsquid8940]

make a cube with that colourful looking wood then stack another cube that has 50% the length of previous cube then continue to do this until you have a good stack of cubes. make sure you stack them at the corner of the cubes then black a cuboid surrounding the stack of cubes so you can pour clear epoxy in the cuboid then take away the other walls of the cuboid that is a really cool stack of cubes with epoxy making another cuboid.

[@richardcooper]

Awesome as always :)

[@haydennelson9404]

I kinda hate epoxy but this looks really cool

[@BunderChowed]

New game: every time Ben claps, we take a shot.

[@lesterleysath1000]

Ummm, why not just make a bigger seat to use more of your blank? It looks amazing.!

[@mini696]

Whats with the dodgy leg to seat transition?

[@specialk22tt]

E Poxy

[@chunkymurps]

It's one word. Epoxy. It's not EEEEEEE poxy.

[@WobyDesign]

You say it like that in your videos, I’ll say however I wanna say it in my videos.

[@katzgar]

What have you made out of grip tape?

[@ddutton0]

Purple will cancel the yellow

[@dpstyles95]

But.. like a Skateboard river table with this method would be sick..

[@rulowth4815]

magfckinificent

[@ilnurnazyrov]

hello there

[@nw6gmp]

it's cuz you calling it EEEEEEEEE-poxy 😂😂😂

[@AJStarch]

What grit flap disc are you using on the angle grinder?

[@CryoGenUK]

Cool stool but long winded video, still watched it all though. :D

[@pessimistlad4965]

purple cancels out yellow, not blue

[@Swagener87]

What is this? A stool for ants?!

[@danielsmith-le8ld]

like your work also epoxy is epoxy not eeeeeepoxy lol I'm British lol so I'm joking

[@maphilib]

Where is Woby?

[@51zuko]

i dont see them as mistakes. i see all your projects as art. art is imperfect. so really the only mistake is using to much epoxy.

[@spongebobc.g855]

The author does like to from scratch, kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

[@Ghayiamix93]

The complementary color of yellow is purple not blue 😂

[@guillaumep.7206]

Instead of wasting so much epoxy, you could have make the seat larger... just sayin' ;)

[@samtownley9019]

shame about the micro bubbs, but still sick

[@rust8663]

eEeEeEpoxy

[@NoBallsInWomensStalls]

Bubbles. All I see are bubbles.

[@mini696]

Why do Americans say epoxy like its two separate words?