It’s Starting to Look Like a Truck Again!

Today we have kaulins truck in the shop and while we wait for parts, there is still lots of work to be done!!!
Onx Offroad link:
webmap.onxmaps...
I Have Merch Available NOW!!! rudysadventure...
Thanks for watching!
For business inquiries please email us at: [e-mail]
Shipping address: PO Box 2572 Colorado City, Arizona 86021
Shop Address: 1420 Uzona Ave, Hildale, Utah 84784

[@tomchristensen8619]

Love seeing the brothers working together.

[@charlesjohnsjr.5809]

@@IR-nq4qvthey’ve already swapped the frame. Factor in Kaulin had a pretty serious surgery and was sidelined.

[@Tom-bo2wj]

Great to see Colin's getting around without his crutches and recovering well.

[@nathanhansford76]

Sorry to be an ass hat mate, but it’s Kaulin not Colin. Not hating on you.

[@professornuke7562]

As a bloke who's seen a lot of road trauma repair go badly, young Kaulin is lucky to have that leg on, and only a bit of a limp that physio may yet fix. I walk the same way as him, and it's just that I'm 55, with a lot of wear and tear on the right knee. I think the Wetzels probably breed 'em tough.

[@46wireboy]

@@nathanhansford76 How do you know? Colin is the only legit spelling I've ever seen.

[@nathanhansford76]

@@46wireboy because that’s the way his parents spell his name, also if you listen, you will hear his name pronounced different to Colin. Shoot a message to his Dad at Matt’s off road recovery, I’m sure he’ll set you straight. Cheers

[@BikingWIthPanda]

@@46wireboyits spelt that way in the video description

[@cognitivedissonancecamp6326]

All of us dudes who don't get along with our brothers getting so much therapy out of this collab, this might be the most wholesome content on KZbin. Kolin, don't be afraid to get bucket seats for that bad boy, although bench is more classic.

[@ramjam720]

Glad to see you guys making good progress on the the old pickup. Looks like Kaulin is getting around really well. I think this project is well appreciated, and well deserved.

[@martinhogan5970]

Before I even start to watch: DUDE: LONGER VIDS!!! Love to watch you guys!!

[@davidbeattie4294]

Great to watch you working on a project with your brother. Good times.

[@jilbertb]

Kaulin - please don't change the color! Love that "old refrigerator blue"! 💙

[@romalacroix8162]

Way to go guys , can't wait to see it go.We are lovers of Chevys, Great Skills and dedication, you both have great sense of humor also a big +..❤😊

[@boblister665]

Those are clutch head screws. Look around your truck uses them in lots of places but the door latches are the bigger ones. Buy the right tools for them now and save yourself a lot of aggrevation

[@chipgoostree2959]

Restored 1950 Chevy truck once clutch head screws everywhere, I made a screw driver by grinding down an old straight driver.

[@johnkranz4004]

Coming along nicely Rudy and Collin

[@garygriffith7436]

Those are called clutch head screws. Oh, and the undercoating is really easy to remove. Heat it with a propane torch,and it just peels off in big chunks.

[@robtalbot4594]

You boys are a credit to your mom and dad.

[@gregholmes3661]

Not 100% sure but I think they have different mothers but your statement remains the same

[@warrendon1388]

@@gregholmes3661 Correct

[@thefrugalhandyman5054]

The view of the front, at the end of the video is awesome!

[@normangarrand1106]

If worried about the rad mount , no problem brackets from frame surround down to truck frame

[@Avi8tor857]

Should use the second or third row from the doner SUV for the bench seat.

[@stephenpoe2037]

Short but sweet ! Thanks for sharing !

[@maxironpaw]

Trucklooks terrific from the front with the drop. Gonna need a skinny bumper.

[@shawnkane7152]

Looking great guys! Love seeing the brotherhood!

[@seanclimb]

YES! Between Matt, Robby, Heavy D, and the rest of the off-road fab youtube vids, I always look forward to a new RAD video the most. Keep it up, dude!!!

[@rarelyright]

You and your brother will never forget this project, when you’re 80 year old guys you’ll be talking about it

[@3gunshooter60]

Thats a beautiful truck.

[@robertr4193]

Looking good guys. Colin will be driving it again before long.

[@Questionable_creations]

i like it when I find free tools in my newly acquired junk, haha

[@michaelcase9270]

Rudy do a tilt forward hood

[@Vegasoutlaw]

Rudy you are doing a great job, please show us more of how you come up with new ideas on how you make the tool for what you need on the spot. I like to see more of what's in your head.👍👍

[@truracer20]

For future reference get the puller bolt tight then tap it with a hammer and the wheel will pop drama free.

[@toddhoffmaster6057]

It is nice to see the brotherly love. Haven't seen Jannell in a while, hope she is still in the picture.

[@kylewis330]

I've been wondering the same.

[@rrphelps]

love it. I did a 65 long bed stepside in about 1982.... this brings back great and (frustrating, painful, angry) awesome memories! I remember painting it in my friend's garage and putting a surfer stripe on it too... I later sold that truck to Steele's garage in wmsbg va when I was a student! Great Job boys!

[@jeromestrong5614]

Awesome video. Your Awesome for helping your brother out with his dream truck.

[@DRFelGood]

That’s a BA look Rudy !!! Great project!!!

[@skyepilotte11]

Gonna be real sleeper, cruiser...Great work.

[@milomiller909]

Great work guys. God bless you all.

[@jays9421]

Why not tilt the hood open from the back to the front Actually, you should be able to tilt the whole front end hood And all

[@rickreese5794]

💯👍😎🤷🏿‍♂️

[@davidfarmer1666]

It looks good when you put the pieces together. Those horn screws are not rounded, that is a special screw. Go to your parts store and show them the screw so they can get you a screw driver.

[@fredluna1969]

Brothers working together! 😊

[@randyknox7350]

FYI I think the screws that were in the steering wheel are called clutch head. They look rounded out but they have 2 lugs

[@lonhoschar1943]

Really a great old truck! I love seeing them being brought back to life! You guys are doing a real nice job on the old Chevy and it's going to be awesome!

[@1944chevytruck]

AWESOME LOOKING GOOD!

[@PhixitPhil]

Whenever I watch these shows and these westerners talk about rust on a car😂. Being from MI I could only a dream of something in this shape

[@TomBostian8255]

Guys, you all have it looking great! Really looking forward to seeing it all together.

[@scottwyckoff5483]

Trucks looking good!

[@Katter715]

That front-end would look fire with a 2016 gmc grill custom fit for it 💯🔥🔥💥

[@bushmatt]

When you come into someone else's handy work on screws that have been buggered, try to pound in a torx bit and work them out. It doesn't work all the time but it works most of the time. And who doesn't have a bunch of torx bits to use as extractors.😅

[@rayhess3175]

good lookin ride,guys -A-plus!!!!

[@AFloridaSon]

It's an awesome truck. Hard to believe it's not got a rust problem. Can't wait to see what you all do with it. I'm sure it's going to look great.

[@foxp2483]

Robbie needs to paint it pink.

[@TetraHydroCannabinolTHC]

​@@foxp2483wtf why pink, maybe a midnight purple, but pink cmon it ain't a bitch mobile

[@leroyll1144]

oh man, your videos are just not long enough.just when you really grab our attention ,they are over.!!! also there are not enough of them each month.!!! more more!!! get it.!!!!

[@johnguilfoyle3073]

From a mechanical point of view, it would be more effective if you gave the Penetrating oil a moment to soak in between spraying and turning. From a videography point of view, it would be better to close the doors so you're not shooting into the sun.

[@rayadams5076]

JC Whitney used to have kits to replace the rockers and bottom fender corners with Glas units. I'm sure they are still available out there.

[@theburtseoni]

Kaulin is going to have one mean looking old Chev PU there!

[@davidweidner1675]

She's a sweet build! Thanks for helping out Collin

[@coloradoadventurejunkie7721]

A real time saver way to remove the steering wheel is to put the nut back on by a few threads and yank the steering wheel loose. Leverage yourself by putting your foot/leg against the brake pedal. Position your hands at the steering wheel braces. The nut on by a few threads will prevent you from hitting yourself in the nose with the steering wheel, when it comes free. It doesn't always work, but it's a real time saver when it does. It's an artform ;-)

[@hulanbailey5219]

Man you definitely need more content. I need more of Rudy fab'n with his bro . Just dont seem like much .

[@billhayes8526]

Kaulin - Tell Rudy to help you make a flip front end!

[@dougjackson23]

Rudy... you and your brother are doing a great job of restoring & modifying the old truck. Good luck with the rest of the re-build! Good luck.

[@katreniaclark]

It looked great just sitting there with it all together.

[@hulanbailey5219]

One sweet truck . I wish you could wash the dirt off the parts your going to be working on . Its way easier to work with if it's clear.👍🤘💪✌💛👌😁

[@douglasthompson3787]

Truck is looking good hope to see it driving soon.

[@jorgecoria7858]

Please restore this truck as much as possible, it would be great to see a build and a full makeover, you guys deserve it. Create a show stopper of a Truck! Paint it in the original colors, loose the chrome and man is that truck going to be a neck-breaker! Cheers to all!

[@kimwatchman644]

Yup...I suggest getting rid if the gas tank. Those where killers back in the day. Maybe one in the back some place.

[@drumwish2010]

Truck is going to look awesome!

[@darlalinn6216]

Great truck! Looking forward to see it finished.

[@terrywells3955]

Rudy & collin it's gonna be awesome whan it's done

[@andyheinecke1280]

Rudy did score a sweet wrench 😂

[@kennylove188]

Colin's C-10 is mint compared to most that age. A minor amount of repair to the panels behind the wheels and you are going to have one sweet truck. You are so lucky; I have a '63 C-10 Panel Delivery (like a window-less Suburban) with rear barn-doors, and it is a rolling rust bucket. Great project guys. Smart move remounting the body onto a modern frame, suspension, and drivetrain. You'll be able to enjoy it for many years to come. Good luck and have fun !

[@samlevi3821]

Absolutely love your stuff. You motivate me to turn wrenches.

[@alexduke5402]

Dude it's sitting in the house watching this twiddling a 9/16s lol

[@samlevi3821]

@@alexduke5402 just finish breaking down the top half of my Wrx engine and now about to run custom fuel and brake lines.

[@markcole6460]

Your videos are getting really good man. The music and music volume are on point, your edits are clean. Love what you’re doing

[@jays9421]

Hi, Rudy, doing great on the truck. You know, you're always gonna have, Haters Don't worry about them have fun. Spend time with family. If the haters don't like what you're doing, delete them and block them. Family and brother time is Great

[@justindorado8152]

im glad too see you havent forgotton about colins truck its a nice rig i want to see it do nasty burnouts plese

[@timoldenburg2249]

Looking good 👍

[@builtbybo22]

Looking REALLY GOOD Guys!!!! Great progress!! #BuiltByBo

[@jerrymestas1231]

Looking good.

[@whittlerdave1440]

I think it's gonna be an awesome look in truck 1 of my favorite years

[@clintonsmith9931]

Best seam sealer you could get in them days. Bet today sealer won’t last half that long.

[@89G]

Loving the progress! Great job guys!

[@riptodd9111]

@@IR-nq4qv Ima go check ur channel n see how much your doing.

[@jimmyjenkins9240]

Love the look of that C-10!

[@duanelawrence78]

Body is in great shape!!✌️🇺🇲

[@michaelwpaulin4876]

Kaulins dream truck is really starting to shape up.. looks like it’s in pretty fair shape.. keep up the great work guys

[@user-nj4mk5if1b]

Kaulin you don't know how lucky you are I got two older brothers and they never wanted anything to do with me I'm 65 now gave up in 2001 count your blessings

[@nocrackhere]

You're a good man Charlie Brown!

[@JBdontcare]

Coming right along Rudy

[@seng628]

Loving see the brother work together

[@erikhannig1448]

Bamp pliers work well for rounded screws

[@robertthomas5590]

Nice job.....thanks for sharing.

[@michaelralls2498]

Great project , glad to see it happening.

[@JeepsAndEats]

At least you won’t find a 10mm socket under that seat!

[@thatdave86]

I thought you may have tried the Hammer trick for getting the steering wheel off ,the shock treatment method ? The stance and look of the truck will be great

[@kelumsrimal5212]

I didn't even get the notification yet I'm here

[@richardthomas1743]

It's magic!

[@61rampy65]

Kaulin, those are called clutch head screws that hold the horn button thingy to the steering wheel. Yes, they make 'screwdrivers' for that kind of screw, but they may be hard to find. Edit: that truck must be fast, it's going 40 mph while sitting still! (5:52).

[@mudduck754]

If you're going to work on an older general motors product you definitely need a clutch head screw bit, or screwdriver. I forget where I found mine, when I was doing my '53 GMC. It's not something you find at harbor freight. I know I had to go online to find one for sale. And that was about 10 years ago.

[@billhenry9599]

I've still got mine if anyone needs one. They are a little hard to come by. I don't have any old chevs anymore....bummer!

[@kenfrazier616]

great start

[@ronaldgallihugh9456]

Man that's a kick ass truck

[@stormyfunk8452]

Beautiful truck

[@deandennis2838]

That seat looks like my 6 month old puppy got to. My living room couch looks much the same. 😅

[@Mryiyo209.]

THAT TRUCK WILL BUFF OUT PRETTY NICE WITH ALIL ELBO GREASE

[@COM70]

Another great instalment!

[@brianhendricks5326]

Nice to see you guys working together reminds me of my kid brother and I working on cars fabrication and enjoying quality time together. 😅😊

[@randyweishaar3316]

I've had a hard week so far. Thank you for lightening my day for a while.

[@davebenson1504]

Looking GOOD! 🙂

[@jamessavage503]

Nice work Rudy

[@jps99]

You guys are getting it done, looking good!

[@KevinSmith-hf1kg]

Dude, when you said, "sweep", I thought you meant vacuum. But you actually swept it. 😂😂