This Might Be A BAD Idea For Kaulin's C10 Dream Truck

[@cycle_path]

Kaulin is so blessed to have you as a Brother.

[@thatdave86]

Nice fab work Rudy We know where there are some spare air tanks that might fit 😅

[@lioneltaylor9573]

Hey Rudy, I think I speak for everyone when I say we love watching you fabricate and would love even more videos from you.

[@timoldenburg2249]

I just think it’s awesome that you’re helping your brother build his dream truck, all my brother has done for me is give me a headache every day 😂

[@robertc1433]

I know what you mean

[@cnc75adventures49]

Better than a fat lip👍👍

[@LoganGray-k3m]

I'm not a low rider guy, BUT I'm really enjoying this build. And it's awesome that Rudy is doing this for his brother. My brother won't do a thing for me, so it's awesome seeing brothers get along and help make their dreams come to. You are a great brother, Rudy!

[@davidb8001]

Kaulin, you are so lucky to have a great Brother like Rudy helping with your dream car

[@kevinkhebertson5159]

I have been a fabricator for over 50 years and for someone as young as Rudy he has one hell of a future ....

[@larrydavidson3402]

This is an exciting build guys. Rudy is one heck of a fabricator.

[@robertquackenbush5547]

Yes he is one of the best 👍💯

[@dieseldummy76]

And a great Big brother!

[@dapperdanbuilds]

Love this build! First, i love that Kaulin wants a bagged C10 in a family of off roaders! Second, i love that Rudy is going outside his wheelhouse to help his brother! Awesome job, Rudy!

[@heartsky]

Extracting those broken exhaust bolts, you made that look easy, nice!

[@justingould7348]

If you happen to see this I and I could give my humble input I would highly recommend you consider going with an aftermarket ECU like a Holley Terminator especially since your putting a turbo on it. It gives you so much more control over things which ultimately helps with reliability and longevity of that LS.

[@Nomder100]

On a positive note. I love seeing brothers help brothers. Collin definitely deserves it.

[@pja8204]

I'm so excited to see Kaulins truck go in the shop, I want to watch every second of this.❤

[@ZootSuitCooter]

Glad to see Kaulin getting around easier. Rudy's getting pretty good at this stuff, well done.

[@lightspeedlife415]

Ur sounding more like your fasha

[@ZootSuitCooter]

@@lightspeedlife415 What?

[@richardbbaugh81]

Glad you guys are back at it. Glad Collins surgery and recovery went well

[@isthatrubble]

the correct spelling of his name is literally in the title of the video.....

[@allentinnell4497]

Rudy you are one Hell of a fabricator good job

[@pja8204]

Just like your dad!

[@norcoredneck]

Great to see you back on the C10 project.

[@jameskendrick573]

Happy to see the brothers together again awesome

[@ramjam720]

I wish that I had a brother like you Rudy. Kaulin had had some bumps in his life, but I can see that you have always been a tremendous source of support for him. Keep up the great work.

[@opendstudio7141]

Every once in a while, you sound just like your Dad. Hehe! I think it’s cool. Love your Dad’s passion.

[@JT-SE-OHIO]

Kaulin wanting his truck to go lower instead of higher is cool and a complete 180 for this family. Rudy can get it done. If the control arms never cross center then there won't be any bump steer. Both front tires will stay in alignment with each other instead of the toe changing. You can use taller ball joints if you have to. It will make the steering feel much better and lower the front roll center. Mount the rear track bar as low as possible and keep the sprung weight to a minimum. I would also use sway bars front and rear to further improve cornering. It could handle like a sports car. Cool project.

[@dalegereaux1863]

I was glad to see those broken bolts come out pretty easily. I know what a pain those can be sometimes.

[@mikedesilets3324]

After our last conversation, that included the status of this build, I'm happy to see you and Kaulin back on this build. I can't wait to see it completed.

[@Backroad_Junkie]

Can't wait until the first time you have to go recover one of MisAdventure mini-jeeps, lol....

[@RealMrNails]

I LOVE that these come out on Monday morning.

[@rolandtb3]

Kaulin will be getting something special. Good to see him puttering around the shop, helping out on the build.

[@grimsoul0]

It's different seeing you build something and lowering it instead of raising it. It still may need rock sliders in case you hit a speed bump. 😁

[@donwilliams3626]

WB Kaulin, your chariot has been waiting for your return. Everywhere you go you will be a billboard for Rudy's fabrication skills. I can't wait to see how this classic grows with 50 years of technical improvements available for you to employ.

[@edzimdahl1158]

The tubular a arm kits I've done were all pretty much a straight bolt on, thinking perhaps you ordered or they sent the wrong one

[@leroyll1144]

those airbag mounting plate should have been mounted in the opposite angle facing in,so at high inflation the bags would inflate almost straight up & down. just a suggestion.!!!

[@wfdegon]

Was thinking the same myself

[@Greg-bu7mi]

Rudy...you got talent! Your "No Fear" attitude is awesome. Great work!

[@UberLummox]

GREAT fabricating! You show zero fear - love it. When tacking, instead of turning your head sideways, maybe point it down so the brim of your hat shields your eyes. I heard the flash can still damage closed eyes. Anyway, it works for me.

[@daviddaw999]

I am from the UK and I don't think that it would be possible over here to get insurance for a new driver, such as Kaulin, on a turbocharged V8 vehicle that had undergone so many modifications. Our insurance industry would have a coronary.

[@Shaggy314th]

Do they have to inspect the vehicle? If not don’t tell them.

[@daviddaw999]

@@Shaggy314th If you have a claim, it will probably be inspected and any undeclared modifications will void your insurance. Declare the modifications and you probably cannot obtain insurance, so you are in between a rock and a hard place.

[@CoolWaterDave]

Glad you guys got back to this, stoked for Caulin to drive his dream truck.

[@susansmith-franks684]

Rudy inherited a GREAT Safety Squint from his Dad! 😂❤

[@FrodeAltink]

Yes, I almost had forgotten about this one. 😂 nice to see some progress. Looking forward to the next episode!

[@wendellharker6690]

That is cool 😎 can't wait to see it run down the road thanks for letting me watch 👍

[@Featherburner]

Broken exhaust manifold bolts on LS motors are very common. I have 2 on each side that are broken on my 6.0 and they have never had a wrench on them. Expansion and contraction over the years kill them.

[@davidmobley5984]

Thanks for the show 😊

[@danielproulx7288]

I'm happy to see you guys working on the C10. I'm looking forward to watch this build.

[@tiredagain6722]

Good to see the C10 again!

[@anthonybostock4854]

Great to see you guys working on the C10 again

[@wrightharris9367]

You live a gifted life…three broken studs and no cussing😅. That’s quite an accomplishment!👍. This is going to be a cool build for Kaulin .

[@throttlewatch4614]

The LS is notorious for broken manifold bolts

[@rschrisman]

Glad to see you back on the C-10. Cool project.

[@jeromed685]

This is awesome! I like the way you are making your own brackets instead of being limited by the factory stuff.

[@Karengarrett-qz1vv]

Great seeing Kaulin getting around better and able to help !

[@frankrey7676]

Don't forget to move where the steering links are mounted up as well. Or you may end up with some wicked bump steer.

[@TyREMAN78]

Agreed 👍🏻

[@TheGhungFu]

I've been running an Ebay turbo for over two years on a Subaru and it's been running great.

[@The_Samsquantch]

I came here to see if anyone was knocking it and haven't seen a single comment yet. Kyle over at Boosted Bois has been running ebay turbo's on some of his earlier builds and put those things through their paces and they keep on goin'.

[@Josh_wardell]

Rudy, I feel your stoke man! Pretty cool watching you guys tackle something completely foreign and pull it off!

[@_Merica_USA]

Another Great Video 👍 Great content, keep up the great work!

[@michaelcastor7276]

Was just wondering about his truck last night. Glad to see you working on it again 👍

[@ausubo50]

Good job Rudy. Learning while doing.

[@1950harleycharley]

It’s good to see so many brilliant craftsmen from Utah!

[@CKaiser5517]

This beast is going to be a tire roaster! Very cool.

[@no-worries-its-okay]

Bummer about losing the footage!. You did a good job of catching us up.

[@nancyduke315]

I am excited for Colin. I have felt sorry for him because of his leg. Bless his heart I know exactly what he went through. I am on a cane now but I am old I’m 74 it’s not Easy to go through no matter how old you are. Keep up the good work absolutely love the whole family.

[@dalegereaux1863]

Nice work fabricating all those new parts and making everything fit. 👍

[@kevinm5177]

Wow, really excited about this build. The blend of old and new is gonna be great!

[@aaronmcconnell7358]

Looking great Rudy Dave Chappell would be proud

[@chiefvilla3167]

Good job Rudy. Going to be looking cool and sweet sitting low. Oh my friend driving lowrider. 🤙🏾👍🏽🤟🏽🤜🏽💥🤛🏽😊😎🙋🏽‍♂️ .

[@pja8204]

Utah is not lowrider country!

[@1944chevytruck]

Good job everyone!

[@TOOMBSTONED]

I really enjoy your videos, wish you had the time to make more, keep on keeping on.👍🔔

[@BobSmith-zv9mi]

Rudy you have a great talent

[@BradleyBeeksAdventures]

This will be awesome once it’s complete !

[@mater3709]

Copper coat is GREAT on those studs/bolts going back in especially for exhaust

[@myanu0072]

Rudy, you are awesome. All we need is MORE videos. ALOHA

[@mh-im2kq]

You're awesome.. and love seeing Kaulin there

[@RDCM1008]

Impressive, great job

[@Bryanja81]

LS manifold bolts are always broke. Just weld up a nut and zip them right out. Its not a big deal. The heat shock and aluminum head make it pretty simple.

[@markreetz1001]

Pretty impressive Rudy. I was finally able to see what a fabricator was talking about while saying what he's doing!! Thanks for the upload!

[@robertthomas5590]

Always enjoy watching.

[@tdawgnok]

Going to be a great looking truck when you are done with it

[@bikeliferider0377]

yess another c10 video

[@tomg721]

Glad to see that you are back to working on the C10.

[@skydiver6711]

I love those pickups. Had one myself that I had big dreams for and could just never put enough money together to do what I wanted. Finally gave up and sold it and bought a more modern truck. Still miss mine.

[@decentgarage]

Awesome job man! Having access to your software and plasma cutter is a game changer

[@Skillz357]

Best brother ever goes to Rudy! Great project.

[@fredluna1969]

Awesome job RAD

[@JanelleVocate-Ames]

YAY!!!

[@demeryyazzie8289]

Everyone needs a older brother like you Rudy 😎

[@phillipmoody1209]

This is awesome, on another note, those studs that just came right out, I felt that in my heart.

[@paulrivers7248]

Ive been super excited about this project as well ever since Rudy posted the vid about it

[@270billjones]

This is sick! Nice Job Rudy and Kaulin!

[@tiredoldmechanic1791]

Do you have a way to adjust caster and camber? The slots that the upper control arm mounted in were the factory way.

[@Rudysadventureanddesignreal]

My mounts are identical to the factory ones, I can adjust the caster and camber from them

[@2000S10V6]

As much as I love the offroad stuff I'm super excited to see the C10 build!

[@cadilakisrodcustom]

Yes! Turbo and air bags.. this one is gonna be a unit!

[@stoker20]

That's going to be one of the coolest rides on the road!! Don't make it too shiny at first. Patina.

[@clintoncarpenter5577]

I'm stoked for this build series!!!

[@williamrupley7605]

Please share with us how you will align front in

[@davidfreyta3857]

It's good to see Kaulin and you working together again.

[@lestaylor3641]

Collin also had a major leg operation. Great to see you up and getting involved.

[@YippydaSnoop]

The love these little episodes of the C10 the funnest thing to do is work on your dream car with a family member

[@jimmyjenkins9240]

Great progress! Looking for ward to the next installment.

[@LeslieRukke]

Very much looking forward to this build And don't lose anymore Footage LOLI don't wanna miss anything.😊

[@Nachovalenti899]

Rudy, you're a very good person and a great brother. I wish you the best, you deserve it.

[@KR-jq6ru]

Nice job Rudy, that’s going to be a nice ride..

[@papatomsthoughts]

Looking forward to this build. ❤❤❤❤

[@larryflanigan2761]

Rudy your doing great young man very impressed with your skills, Kaulin is a lucky brother.

[@280zone]

I am a little concerned you have a bit too much negative camber built into that configuration at ride height. I'd hold off fully welding it until you have an alignment pro look at it.