It took me 3 times to discover the Amazing Invention

It took me 3 times to discover the invention
AMAZING! TOP 3 POPULAR IDEAS!
-----------------------------------
• I can't believe I just...
• it took me 30 years to...
• Many People Do not kno...
TOP 3 IDEAS USING CEMENT
------------------------------------
• Why didn't I know this...
• The secret revealed! T...
• I wish I knew these th...
BEST 3 INVENTIONS
-----------------------------------
• It took me 3 times to ...
• The manufacturer doesn...
• Why didn't I know this...
IDEAS USING WOOD
----------------------------------
• after knowing this you...
• Few people didn't know...
• I TURN IRON BOX PAINT-...

[@trinitymaker5833]

The precision and attention to detail is mind-boggling 😂

[@KentuckyDogg]

Hadji there is ready for a job as NASA with his Precision and Skill's.......LMAO !!!!!🤣

[@boblabla6932]

Would like to see how you would add an oil feed for long term burn

[@alm7707]

nice! Add a suply tube to let more used oil to drip in and it will burn continually. I made one out of a small tank. I put a 2 inch piece of exhaust pipe in on one side near the bottom and a curved down piece on the upper oposite side. I ran a gravity line in for the oil. I put a fan on the lower 2 inch pipe. I welded a 2 inch nipple in the top with a cap. To get burning let a bit of oil in and drop a few strips of cloth soaked in diesel through the top. when the oil is burning, cap the top and turn on the fan. Heat coming out the curved pipe will melt aluminum.

[@Trendingnow-31]

Thank you for sharing

[@gilbertchivhunga]

That's wonderful

[@gilbertchivhunga]

Sometimes the first one made is not always the best, but we give all the credit to the first inventors.

[@Johnny_Benson]

Ok the grinder finesse cutting the saw blade into a circle was fucking legendary.

[@Trendingnow-31]

Thank you

[@christownsend7602]

If that's galvanized pipe, be very careful not to breathe the fumes, very bad for you.

[@ernestlageman1553]

Yes , i was poised after welding , and I was 12 days terrible sick including medication

[@freeidaho-videos]

Yet, you can warn and warn, and few pay any attention.

[@robgad2271]

Nice concept, now it needs to be reduced in size to about 1/4 so it can be used as a stove or heater with a conventional heatilator tube type heat ex hanger and conventional exhaust for home use. Also, was the-temperature shone in F or C?

[@Trendingnow-31]

Great point!, temperature I used c

[@davidsparling-lh4ut]

U don't wanna use that in the house

[@lilhomie6234]

I wouldn’t use it for cooking or inside of anything, good for makeing a forge with or building a heat transfer somehow to heat a place, you don’t want those fumes building up or getting on anything you consume

[@bilbobaggins4366]

Or use to melt steel 😂

[@vintageringsGarry]

Waste vegitable oil + blue flame good for inside. Fresh air intake adjustable would be beneficial for breathing healthier. I ran wvo no chimney or fresh air gor yrs in shop but i preheated the vegi oil in tank and nozzle

[@alfbittner6489]

Your idea is outstanding, your application is crude but effective. How long does 100mm last, have you considered a drip feed for continuous use. Good invention.

[@Trendingnow-31]

Many thanks, 100ml takes 15-20 minutes depends on the volume of blower

[@tongjojo901]

great invention, but is it safe, it may contaminate the food your cooking from the burning engine oil?

[@386793]

YESSSSS

[@wolverine4208]

i have seen all of the parts of the previously made stoves at your channel and it is best one you made, very creative keep it up brother.

[@Trendingnow-31]

Thank you so much

[@ramennaidoo162]

Very good. A question though, how long does the amount of oil you added lasts.

[@Trendingnow-31]

15 - 20 minutes depending on the controller

[@ramennaidoo162]

@creativeideas5041 Thank you, and all the best.

[@flowershaman]

Good ol dinosaur juice

[@JuanCarlito-xj8ri]

Great ideas thanks you

[@Trendingnow-31]

Thank you

[@VJMCrafts]

I will make top exhaust like this in my waste oil stoves thanks for the idea.

[@Trendingnow-31]

No problem 👍

[@freeidaho-videos]

Love the blue flame which few others achieve. One caution, welding galvanized pipe, or zinc plated fasteners is very hard on your lungs. Dip them in muriatic acid for a few minutes to make it safe to weld.

[@Trendingnow-31]

Appreciated ❤️

[@suiseidel1]

You own a welder but not a drill? This is really cool though.

[@KentuckyDogg]

A welding machine but no welding hood....Not Amazing

[@caesarcayaba1690]

How do you replenish the fuel?

[@valeriosouza3322]

Realmente...como é abastecido o óleo ???

[@CreativeWW]

Thank you for sharing this video! Very helpful!

[@Trendingnow-31]

You are so welcome!

[@nelsonchinasamy9857]

The fuel being dirty used oil, what about the fumes. Surely there should be black smoke.

[@cyrilaranador8581]

Hiw to add oil if empty

[@shrikantchitko8841]

How do you replenish the oil when the stove is working?

[@nathanadams2705]

That works , little fine tune with delivery, and ya got something .

[@Trendingnow-31]

Thanks

[@randye4517]

Thank you great job

[@Trendingnow-31]

Our pleasure!

[@shailendramaharjan]

Nice idea, upgrade version required now.

[@Trendingnow-31]

Enjoy it

[@mohiuddinshah5558]

Your projects are amazing. Love you sir from Indian kashmir

[@Trendingnow-31]

Many thanks 👍

[@aikietv]

Wow amazing. I have an idea. Ty for this video

[@Trendingnow-31]

Your welcome 🤗

[@Randz360]

Nice design but Lack of proper air ventilation will result in unstable flame inside the chamber, if you turn the blower into minimal flame will eventually stop.

[@Trendingnow-31]

Thanks for the tips!

[@paramjeetjohal]

Nice job sir❤

[@Trendingnow-31]

Keep watching

[@heidhouarbi]

Make it slide for cup. Because some people are afraid to put their hands close to the fire😊😊

[@Trendingnow-31]

Thank you for the tips

[@indian5180]

Safety protocol if use in room?

[@jirwaShirwa]

Thank you

[@Trendingnow-31]

You're welcome

[@jaimemoreno8927]

SO . the oil burns down the chamber and air makes it blue.?

[@Trendingnow-31]

Yes sir

[@SS-vw9oq]

How long this fire will last for the 100 milli of waste oil ? In your experiment i mean

[@Trendingnow-31]

Hi, 15 to 20 mins

[@harddes7242]

Ganda idol😊good job😊 👍

[@Trendingnow-31]

Thank you 😁

[@bryanlonger8646]

Taste of the fuel will impact food, depending on method of cooking 1 ....and for the same readon you not supposed to put oil on your skin is the same reason you dont put in in your mouth.

[@katastrophy9522]

With this method there is no way to add more oil safely. Its really good though.

[@АлександрПетров-ъ1б]

Чем дольше горит,тем сильнее разогревается масло и начинает закоксовываться в тарелке.Потом чистить.

[@sarahmaydelacruz1433]

Nice diy 👍

[@Trendingnow-31]

Stay connected

[@saeedanwar4423]

Very nice 😊

[@Trendingnow-31]

Thanks 😊

[@romilsonmagalhaes6487]

Excellent

[@Trendingnow-31]

Thank you so much

[@theaofngol4758]

Beautiful 😍

[@Trendingnow-31]

Thank you! 😊

[@jodym.2800]

The one thing I see as an issue is oil delivery. Need to be able to supply without having to disassemble the burner.

[@Trendingnow-31]

Thank you for tips

[@hatusaiasse5371]

Olá, tudo bem? Voce usou óleo velho de motor?

[@Trendingnow-31]

Yes

[@hatusaiasse5371]

Ok .belo trabalho.🇧🇷

[@puneetrajput4501]

How much oil used in 1 hrs ?

[@Trendingnow-31]

Usually 100ml it takes 15 to 20 minutes

[@puneetrajput4501]

How can get

[@resadqemberov6888]

Hello, how many hours does 100 grams of motor oil burn?

[@Trendingnow-31]

It takes 15 to 20 minutes

[@sarfarajkhan8996]

How longer this will work

[@Trendingnow-31]

18 to 20 minutes 100ml

[@thegardensecret01]

Blower fan aur controller ki kitni cost padhti hai

[@Trendingnow-31]

It coast like you are charging 2 phones

[@JoshuaCabugnason-j1h]

Ang galing

[@Trendingnow-31]

Thank you 👍

[@brandonmason5822]

I picked up a dc 5v fan with a USB plug on it. To me it's slow what should I look for?

[@Trendingnow-31]

You need controller 12volts

[@markloudermelt1407]

How long does the 100ml last

[@Trendingnow-31]

15 to 20 minutes

[@buensomeritano1755]

Brilliant

[@Trendingnow-31]

Appreciate 👍

[@skeggiskjeldarson6639]

It gonna take an awful lot of time to wash down your house and getting rid of the smell after using it a month or two. Best of luck.

[@ericspratt3164]

Probably smells better than those lilac scented things my old lady plugs into the outlet🤮

[@kaka_kaka28]

Burn ethyl alcohol in a steel saucer in the room and the smell is gone.

[@luishurtado1057]

Hi where do you buy the fan with controller

[@Trendingnow-31]

Online shop

[@jorgemorales8028]

Aire is so spencil

[@Trendingnow-31]

Thank you

[@Calico5string1962]

Neat idea. But why the hell did you use galvanized material for the "burner head"? Terrible material selection choice... That zinc coating will degrade and burn-off. Zinc fumes are extremely toxic. Of course, so is the burning oil... but the nonetheless, black-iron fittings & pipe would have been a more appropriate choice (stainless steel would be superior!). In any case, thanks for sharing.

[@Trendingnow-31]

Many thanks 👍

[@malikbabar9220]

Dear weare are you from

[@Trendingnow-31]

Thank you for watching

[@farrukhhasan7751]

Only he can make this

[@Trendingnow-31]

Thanks

[@jalansirsak6021]

Waooo keren bgt

[@Trendingnow-31]

Thanks for watching

[@ratgreen]

I'm skeptical this video is real, I've never seen waste oil burn so cleanly with such a blue flame. If its legit I'm impressed, but I remain skeptical

[@jaimemoreno8927]

That's right , burn oil or kerosene deliver " orange flame "

[@bagastehniksipendingin5331]

Kipas iyng nya harga sampe berapa bos

[@Trendingnow-31]

2.85A

[@gundamwin891]

Its hard to use that and give you an hard time to clean the cooking equipments specialy under the pan to much oily and black spots and the smell of that is very disgusting

[@charlesmckinley29]

👍🏻

[@John_Riddik]

Даааа... Варить ты точно не умеешь 😂

[@bradygaming07]

Hello Asa ka karun

[@Trendingnow-31]

Thank you for watching

[@ishaqueali339]

😢😢😢😢😢😢

[@thepvporg]

The dangers of burning unrefined oil is well known, plenty of carcinogens in oil oil that pose a risk when burnt...

[@scottlofton2607]

As. Well as welding galvanized pipe 😮

[@TheGraneable]

Living gives cancer my guy

[@ray-ph7wr]

Do a little bit of research and just the food that you're eating out of the stores. You'd crap your pants

[@SumairaShafi-hm7vi]

Ik

[@jdhooo]

It already was refined. It's not crude oil. You are disinformation.

[@lukasbaumgartner4303]

Veľmi ekologické 😂😂😂😂😂 viac takýchto vynálezov na starý olej a zemeguľa bude čistejšia 😂😂😂😂😂 eko-aktivisti musia mať z vás veľkú radosť že sa takto staráte o čisté ovzdušie 😂😂😂😂😂😂😂😂😂

[@lukasbaumgartner4303]

😂😂😂😂😂😂😂😂😂😂😂😂 India 😂😂😂😂😂😂😂😂😂😂

[@veikovasko5603]

It costs 2$ to lasercut shown discs, what is the appeal of making them by hand?

[@Inlinetodie]

😮 Ni muzak I'd like to hear work not music please

[@mrdebug6581]

the endless music-loop is too loud compared to the working-sound. I have an hearing-aid and I have to switch sound off 😢

[@coachgeo]

the end plumbing parts making up the final end of air chamber on this one with air holes in it (8 and 12) ...being what appears to be of a larger air volume size than the one you made in build below.....does it result in a slight upgrade from link below or did it turn out about the same in your view? kzbin.info/www/bejne/qqKoloqKr56YjNE are you determining size and number of holes based on anything in particular such as ratio between size of oil tub , size of air chamber , size/number of holes air exits?

[@TechniciansLifeTv]

Thanks for sharing this video

[@Trendingnow-31]

My pleasure

[@down2earth838]

Need a way to maintain oil level so you don’t have to take top off each time. Great burner

[@Trendingnow-31]

Great point!

[@badgerbalti]

MacGyver and the 'A' Team send their love

[@Trendingnow-31]

Thanks

[@schwarz1597]

No i spierdoliłeś porządną piłkę!!

[@davidsparling-lh4ut]

Ur grinder skills r off the charts

[@Trendingnow-31]

Thank you

[@KentuckyDogg]

Said No One Ever

[@juanvilches530]

Sinceramente es lo mejor que he visto hasta ahora en quemadores de aceite usado, felicitaciones

[@Trendingnow-31]

Thank you ❤️

[@muhammadhabibi588]

The hole or pipe that exits the fire is too big, if it were smaller the hole that exits the fire might be better than before and there should be more holes at least 6 or 8.

[@Trendingnow-31]

That's good idea

[@johnny5fingers0966]

I wonder of you could surround this with a refractory clay or something then build a mini mass heater and an exhaust going outside to eliminate the fumes.

[@OllieBabaSan]

No grate to hold a pot and it's gonna smell pretty gnarly when that spray paint gets good and hot.

[@judetv9831]

How can you use it if there's no electricity you've better buy a rice cooker

[@SleepyCaptainHat-dc6bm]

Very creative idea thanks for sharing ❤

[@Trendingnow-31]

You are so welcome!

[@tatebernd3850]

Don't you have a drill for drilling holes ????

[@Trendingnow-31]

I used rods sometimes

[@Saidulislam-nu7kh]

But waste oil stove is present in home wastes due to oil expenses

[@bengkelanakbangsa1692]

God

[@Trendingnow-31]

Thanks for watching

[@vuchison8630]

How long to burn 100ml waste oil?

[@Trendingnow-31]

It takes 15 to 20 minutes depends on the volume of blower

[@vuchison8630]

@@Trendingnow-31 thank you

[@johnhoward7298]

What is it actually used for as shown ?

[@Aigeneration11]

Can i melt copper silver iron in this

[@Trendingnow-31]

Great 👍

[@danh9002]

Is that galvanized tubing you're using for the burners?

[@Trendingnow-31]

Yes sir

[@omarmilo908]

Poor video coverage

[@gphuang67]

Where do you get the waste oil?

[@Trendingnow-31]

Used cooking oil/engine oil

[@rodolfogimenez2375]

Esta muy bueno voy a intentar hacerlo para saber como me sale

[@Trendingnow-31]

Thank you 😊

[@indian5180]

Oxygen level?

[@newageautotechnology]

Nice build but what is it going to be used for?

[@MCGAletsgo]

some day used oil will be worth a fortune

[@Trendingnow-31]

That's awesome 👍

[@marcdecoste9127]

I like it 👌 How long did it took to burn 100ml of oil?

[@Trendingnow-31]

Thanks, 20 minutes up my friend

[@timdaviszaper]

Nicely done

[@Trendingnow-31]

Thanks for the visit

[@frankrocha1479]

great job

[@Trendingnow-31]

Thank you

[@EDUARDOTUCOL-iy3ck]

Very good idea

[@Trendingnow-31]

Many many thanks

[@putribima2114]

P

[@Trendingnow-31]

Hi 😊

[@ClydenallyMostclean]

Wonderful creation i like it❤

[@Trendingnow-31]

Thanks a lot 😊