ITB F22a / F23a Engine Teardown - How Was it Running - EP. 47 - 92 Honda Accord

[@murdoco.g.5232]

Bisimoto doesn't sell s*** for these engines anymore I built my head with all of his parts a year ago and then my timing belt broke I bent all my exhaust valves about 4 months ago and I emailed them to get new valves they said they no longer sell these parts for these engines only electric cars FYI

[@JaayPeeBuilt]

That’s tragic. I’m pretty sure supertech or ferrera make valves for the f22 and there’s still the delta regrind cam. And we can just run any h22 adjustable cam gear I think…. That’s super sad to hear tho…

[@drewmurray2583]

They're going out of business in a hurry then!

[@jasontulowetzke2419]

@@JaayPeeBuilt so you think possibly a h22 DOHC cam gear will work with the f22ax head?

[@JaayPeeBuilt]

I think we can even run d16 cam gears… I haven’t yet but just count the teeth and if they match up it should work

[@jasontulowetzke2419]

That's dope. And yes you are very right about counting teeth. Thank you

[@tjberry5899]

We’re running +0.5mm C.P. pistons for a Mitsubishi 4G63 (pistons turned around backwards), ‘93-‘96 H22A Eagle rods, stock 95mm F22A crankshaft and stock sleeves in my buddies ‘93 4DR CB7 SOHC F22A turbo build. Made 370whp@17psi with a Mitsubishi EVO big 16G turbocharger and exh manifold. Tuned on E85 using Hondata S300. Tons of other goodies in the engine/trans. BTW - we never, ever, ever remove the balance shafts from any of our F/H builds…ever. Balance shaft belt stays on and everything. And we’re also using K series shift cables and RSX shifter but with the STOCK bracket on the transmission 🤷‍♂️ Anyways, hope you get the F23 back up and running soon!

[@peterbryant3584]

Great content as always just fyi the f22 is more compatible with the h23 rods and ehxaust intake and think like that.the h22 is compatible with the f20b

[@haroldheard]

Posted at the perfect moment. I was looking for something new and fresh to watch

[@JaayPeeBuilt]

Aye thanks man😎

[@ianknuckles6043]

Glad to see your getting back into this motor. I loved following this build. So informative with all of your videos. Your a master of your craft sir!

[@JaayPeeBuilt]

Thanks man I appreciate it🙏🏽

[@haroldheard]

The build is definitely clean. Just hate that the block got messed up a little bit. But definitely love the dedication bro keep up the good work!

[@JaayPeeBuilt]

Yeah it’s a huge bummer but I’m just lucky that damage didn’t go any further

[@haroldheard]

Thanks Jay! You legit helped me find one of my favorite songs beat melody whatever u wanna call it!

[@haroldheard]

kzbin.info/www/bejne/bJOudoOOlNuIhJqg look at the couple videos I got I'm all for f series all day

[@JaayPeeBuilt]

Ayye glad I could help👌🏽

[@drewmurray2583]

It could have fell on the timing belt and bent the valves. Saw that before after a "mechanic" did a timing belt job on a mk4 GTI 1.8t and left the mount bracket bolts loose

[@JaayPeeBuilt]

Luckily the timing belt didn’t make contact and if you look at the valves they’re perfect no contact with pistons at all👍 pistons are perfect, crank pulley did make contact with the frame rail which is what I was worried about but I got lucky

[@ramz9798]

I have three cb7's two 91 sedans and a 1993 couple I love em all best cars to daily drive imo I look forward to one day building a similar setup such dope content 👌 appreciate you mane

[@popanda3652]

Couple more and you can drive 1 a day

[@JaayPeeBuilt]

Thanks man appreciate it! You got any wagons?

[@ramz9798]

@@JaayPeeBuilt no I had a chance to get one for 400 dollars but the person flaked out last minute I dont blame em tho they are rare here in California

[@midniter2001]

Easy to tig it and fix it.

[@crazyzeus83]

Also got an -92 accord f22a3. Been on the project list now many years, gonna fix it up for my son who has fell in love with it. With such low compression rate, i guess a turbo charger could be installed on it. However... Not sure how to do with the ecu and stuff when or if i modify the engine!?

[@denalihough]

Could the extra oil pressure have been from the balancer being blocked?

[@midniter2001]

F23a1 block. Easy swap

[@zmelli]

What Head Gasket do you use, F22A1 Or F23A1?

[@AJIMPORTS]

what are the spec for the piston rings. maybe the gap too large causing the blow by. Also might want to do the block breather mod since you high compression.

[@luiip186]

i have a f22a that need a new transmission will a f23 trans fit with no mod?

[@nicholassantos2327]

Glad to hear the block isn’t cracked man👍🏼. How much power was it making? I have the same transmission in my cd5 btw👌🏼 My bad bro for the power question. Just finished watching the video. Was initially watching it on my lunch break so I didn’t get to finish it then. But don’t be too bummed out man, good thing you still get to tune her in the future.

[@JaayPeeBuilt]

Yeah that was a huge relief! I’m not too sure I never got it to the dyno before I crashed. And that’s dope how do you like the trans?

[@nicholassantos2327]

@@JaayPeeBuilt oh fo man it’s all good. And yeah I like my trans, got it hooked up to a h22. It’s honestly my first swap so I don’t have much experience with other engines/transmissions but it’s a big than what came stock. It revs about 3k @ 60mph haha

[@corndog5631]

Did you relocate your oil filter. I'm intrigued in what you have going on. If you wouldn't mind explaining

[@JaayPeeBuilt]

Yeah that’s an oil filter relocation if you check out my channel i have videos of most of the build

[@mccoleman4310]

I'm trying to convert over to k-series shifter cables and k-series shifter box, I legit just waited almost 2 weeks to get a used shifter cable I'm assuming they're kind of hard to find for me where I'm at, but how hard was it to mount it bro? I'm not going to lie I kind of forget whether you have a video installing it in the sedan (rip)

[@JaayPeeBuilt]

Just bolt up a conversion bracket and install kseries cables and shifter.

[@hopxxn9395]

Are you gonna use a 5 speed from f23a accord?

[@JaayPeeBuilt]

No I have an H22 T2W4 Trans for it. I have an old video on it I think ep13

[@hopxxn9395]

@@JaayPeeBuilt since your using the f23 block is it possible to use the f23 tranny only reason I wanna know is because I have a 92 automatic cb7 and a manual 98 accord(f23) thanks for the response btw keep grinding on the coupe !!

[@fernandojuancadena2475]

Looks like AZ

[@JaayPeeBuilt]

Yep AZ born and raised🌞

[@fernandojuancadena2475]

@@JaayPeeBuilt I knew it looked like the east side moved here 15 years ago from Los Angeles never looked back

[@fernandojuancadena2475]

@@JaayPeeBuilt u know I got my Honda looking to find a good mechanic to do some work for me

[@JaayPeeBuilt]

@@fernandojuancadena2475 hahaha yep Chandler, and once you can get past the summers it’s pretty dope here.

[@fernandojuancadena2475]

@@JaayPeeBuilt for the first two summers I couldn't breath outside and I discovered a/c

[@NGEhunting]

How cost for itb

[@JaayPeeBuilt]

I think they were $700-800