A quick look at how iTrain controls my N gauge model railway. With the help of tutorials made by Bob Fuller I now have my N gauge model railway running with iTrain.
Пікірлер: 44
@modeloco4 ай бұрын
Really enjoyed that Ron and yes, iTrain and Bob Fuller go together perfectly 👍
@quarryjunction-19694 ай бұрын
Fantastic video thanks for sharing. I started a layout but like you I moved. After that never got back into it but that will soon change. New laout plans done and wood for baseboard end of this month and new videos start then aswell
@robinbrowne5419 Жыл бұрын
A beautiful layout and cool automation 👍 My n gauge layout is just a GP40 in CN livery with 3 cars which goes round and round on my desk hauling cookies, candies and other snacks. The scenery is mostly pens, papers and other clutter. Cheers from Canada :-)
@RonArmes2 жыл бұрын
I use the Faller car system. The trucks are battery operated and run along a wire which is fitted into a groove in the baseboard by following the wire with magnets fitted to the trucks. They don’t have many options for the vehicles whereas the 00 gauge have a lot of different models.
@Rule1ModelRailways Жыл бұрын
I won best operated model railway at a mode show with iTrain doing the operating... best control system yet!
@mtnestr98502 жыл бұрын
Fantastic Video & Narration! Just what I was looking for and it expands my iTrain interest. Thanks
@robertstrainset65562 жыл бұрын
Hi, Yes where would we be without Bob Fuller like you have moved fron Hornbys eLnk and Railmaster to iTrains using a DR5000 control station but still with the points controlled by Hornbys decoder and it was great to see your layout running so well now mine being OO and only 10ft X 4ft or so space is a bit tight but I am getting there so was hoping you would have more videos on this but it looks as though this was it shame. Hope you are well and still enjoying watching your trains. Cheers Robert.
@kite72142 жыл бұрын
Well done Ron. Your layout looks brilliant. I too am a N Gauger using iTrain Pro and learning with Bob and Iain’s KZbin videos. Keep it up. Let us have a look at the under board wiring on your next video. Best wishes for 2022, Keith
@1VperOctave9 ай бұрын
Wonderful video. I hope you make more to show the progress with your layout. Thank you.
@martinkeilloh15802 жыл бұрын
That is awesome Ron,im just starting an N gauge using Digikeijs and iTrain got a lot to learn but your setup gives inspiration and with Bob and Ians videos hope to get some automation but mine is a small layout,thank you for sharing
@tidfordjunction Жыл бұрын
Only just found this. Great stuff and wonderful layout!
@johntester72632 жыл бұрын
Great layout,I really enjoyed the video 👍
@staffordstationngauge83592 жыл бұрын
Impressed with your use of Itrain, thinking of going down that route sometime, cheers
@ngaugefouroaksstreetstatio6932 Жыл бұрын
Excellent Ron, this has got me thinking
@pierredutrieux48405 ай бұрын
you refer to Bob Fuller tutorials. I followed also theses tutorials. although I am franch, I could understand perfectly his explanations .It is the best way to learn how use ITrain . Iappreciate your layout.it is verry nice
@RonArmes5 ай бұрын
Yes, Bob’s tutorials are excellent, I could not have done it without him.
@themangoesman5861 Жыл бұрын
Great work, very inspirational for my own layout
@darrenmould8676 Жыл бұрын
Darrenbury Central Hi great layout. Enjoyed watching . Very realistic.
@GodmanchesterGoblin2 жыл бұрын
This is a fantastic effort! Well done! I hope to get my layout finished in the next couple of years (Z gauge using the Dinamo system for control hardware). My layout is quite similar in terms of the main features. I already invested in iTrain and have also been following Bob Fuller's excellent video series.
@petergeorgew6208 Жыл бұрын
Truly excellent video 👍🏻😊
@MarkHenstridge Жыл бұрын
Jolly well done.
@JamesPetts2 жыл бұрын
I approve of automation.
@railwayjade Жыл бұрын
This is amazing!
@angellestat2730 Жыл бұрын
Your layout is my favorites from the ones I saw on youtube. I hope you make following videos on this layout to really appreciate most of it. I would love to subscribe if that would be the case.
@kargandarr Жыл бұрын
My one issue with this video is that the audio is mono coming from the left speaker on my headset.
@kutzancoita6341 Жыл бұрын
Nice layout Ron, could you please respond to 3 questions: 1) How iTrains knows in wich section is the train 2) can you program iTrain to do shunting like change a train composition. 3) what happen if a coupler detach from convoy Kind Regards
@kutzancoita6341 Жыл бұрын
1) question is by using sensors, but i trans knows i think more or less position of ech train by setting his speed.
@RonArmes Жыл бұрын
The track is divided into each section by isolating them. I have not got as far as trying to change the train composition but I think it is possible. If you search for Bob Fuller on KZbin he gives excellent tutorials. If a part of a train becomes detached I just correct it by hand.
@mrgunn272611 ай бұрын
Brilliant layout and video, loved it. Does your iTrain go on strike, that is my question? ;)
@tommiestanfield60932 жыл бұрын
great job, i am just starting out , i never thought about using moving cars and trucks. how does that work?
@nathanward9865 Жыл бұрын
Great work! The automation side of it is a huge part of my rekindled interest in the hobby as well. What are you using for your decoders and firebox lights etc.? I am impressed you’ve been able to sound and light fit so much N gauge rolling stock!
@RonArmes Жыл бұрын
It’s the automation side that got me interested as well. I purchased all of my locos with the lights and fireboxes from CR Signals, you can find them on Google. They fitted the lights into the coaches as well. The Stanier was a stock item.
@ecm54872 жыл бұрын
Inspiring video, good to see what can be achieved with iTrain. I have started using iTrain as well and am greatly impressed even though my model is no where near as complete as yours! I am keen to know the settings you have used on the sound decoders / iTrain, my loco makes the sound of full throttle until the loco has stopped- I noticed your locos sounded like they were coasting/ idling when slowing to a standstill.
@RonArmes2 жыл бұрын
I'm afraid I can't help you with that, I purchased the locos with the decoders fitted and left all of the settings as set.
@JamesTMF Жыл бұрын
Will you be trying TT 1:120 scale?
@BellshillBranch Жыл бұрын
Great looking layout, iTrain is something I hope to retro fit in a year or so. Would love to know how you get such smooth running - do you have keep alives fitted.
@jamestennant-eyles98702 жыл бұрын
Great layout Ron. I also use itrain (on an 00 gauge layout, with a Dr5000 controller). I absolutely concur the Bob Fullers videos are superb. What sound decoders do you use? What system do you use to control the vehicle route?
@RonArmes2 жыл бұрын
Hi James, Loksound decoders are used except for the Stanier which came with the decider fitted. I set up all of the routes manually using Bob’s instructions.
@jamestennant-eyles98702 жыл бұрын
Thanks for your speedy reply Ron. I haven’t come across anything by Bob about vehicle installation, ie the lorry you show following a route. I know nothing about setting up vehicles, where to get them, or how to control them. Presumably there is some hardware hidden under the roadway? Anyway can you kindly point me to any info or videos, so I can look into this aspect? Many thanks.
@RonArmes2 жыл бұрын
The lorries are from the Faller car system. They have far more choice with the O scale than the N scale. They are motorised with a constant speed and follow a wire I embedded into the roadway. Mine are not controlled in any other way, just placed on the road and go. Faller do have more sophisticated systems and choice for the O gauge. If you Google Faller Car System you will find videos and all other information.
@nigeharris1651 Жыл бұрын
@@RonArmes This layout is insane!!! WELL DONE SIR!!! LOVE IT!!!
@richarddx22 Жыл бұрын
Nice gadget probably quite complicated
@kite72142 жыл бұрын
What display screens are you using?
@RonArmes2 жыл бұрын
I'm using a 15" HP laptop connected to an old 27" Dell screen. The screen is about 10 years old but works well and is much easier for me to use with my eyesight then just the laptop.