ITS PERFECT! Yamaha ZUMA STUNT BUILD 70cc | Quick Throttle, Naked BARS & more

[@MOPBOYZ]

she’s getting there boys 🤘🏼🤘🏼

[@officerbanbon5820]

One question for ya. I saw in your vids you have the front cvt cover in chrome. I have the rear cvt cover in chrome and the stock one in the front, I was wondering if you know where I could buy the front one individually cause all my searches left me empty or with the case set. I don’t want to have to buy the set since I already have the rear one. If you could let me know where I could find one, or if I could find one I would appreciate it thanks and keep up the great work🤘

[@traxxasslash2wdbrushless552]

Do u have the old original rear rim I destroyed mine in a wheelie accident I can’t find a new one anywhere

[@olavguldemond4503]

Never looked at your video’s but im glad i did look at it

[@slo_car_fast]

So satisfying to see all the new parts on the bike. Can't wait to see it all put together!

[@predator_boiz336]

So hype to see this thing man

[@davidh5857]

Smells Like First Run. Greetings from Germany

[@MOPBOYZ]

It does!

[@DawleyRacing]

Lookin super 🔥🔥🔥 Excited to see it fully finished up😎🙏

[@MOPBOYZ]

yessir me too🤘🏼🔥

[@elitaz9967]

Love it just finished my setup still need a temp gauge but now just running

[@tylereyres8109]

Dam! So fresh and so clean 😍

[@westcoastfishingadventures7641]

Looking fresh boys🤘🏻. Just finishing almost the same build.

[@synecamilan30]

Handlebar controls ASMR

[@vr46roxx]

Wow that thing is shiny 🤩

[@cav3man360]

Such a cool bike I can't wait for the day I move from china bike to Japanese like the ones u build keep it up

[@BoozySZN]

BANGER! W!

[@phat56pat]

Bushing puller is a good short baby!!!

[@kylezenklusen2041]

So clean, loving the build

[@davidh5857]

Nice and super Clean !

[@williamvellinga6904]

It's Going to be a beast😈

[@BigEpinstriping]

Looks awesome!

[@DJLinux]

Solid build🫡

[@andyanders58]

F.........ng. OG. Trev video all u boys can learn from him. Thanks can't wait till lts done..old man mop.

[@krisley5178]

Looking good!

[@MOPBOYZ]

Thanks!

[@ChadTheLad]

Love to see it!, Im pretty sure the front caliper should be two pistons like on my piaggio they are a pain to bleed, although my issue for bleeding was in the master as the plunger wasn't fully coming out so its like try to bleed it up on half pumps. Taking the lever of solves it and use a screwdriver to pump it.

[@MOPBOYZ]

i got it to bleed fine , problem was the piston seals were bad and all the fluid leaked out . i show it towards end of video!

[@ChadTheLad]

@@MOPBOYZ yeah I saw right after I commented lol I'm sure the GP1 has the same caliper you could use if your waiting on parts 🤔

[@preslavnikolov923]

I need help my jog got some new cvt stuff and now when i do burn out it starts to move forward when I am holding the break real hard it has stock disk breaks

[@Camvba]

Just got your merch boys

[@kelvinmclean7876]

Can this bar work with any scooter? Or we need to order a specific one? And do you have a link?

[@stuntbiker88]

i love brothter zumba build clean

[@MOPBOYZ]

🤘🏼🤘🏼

[@traviswilliams9455]

Idk if this is correct but I couldn't get my temp sensor work under the spark plug with the supplied crush ring. So what I did is drilled a hole into 2 cooling fins as close to the head as I could get and that's been how I check my temp. I have a polini digital gauge the one with temp, battery voltage, and RPM. I'm using a s6 cylinder and it didn't have enough space for the temp ring and where u put the spark plug is recessed so it's like impossible to use the crush ring on the plug.

[@MOPBOYZ]

you have to remove the crush ring and you might have to take a dremel to top of head to clear a spot for temp ring , depending on the head you have

[@itsroads206]

How did you do the kickstand?

[@bartobuilt2601]

the Grimeca caliper is identical to the Brembo. so if you found seals for one of those they should work.

[@sadtobecanadian]

Where do you order your parts from?

[@bartobuilt2601]

what diameter is the 4 bolt rotor? Canada only ever got the small diameter legs (27mm) and 3 bolt rotors @ 155mm

[@MOPBOYZ]

190mm

[@bartobuilt2601]

@@MOPBOYZ 👌

[@predator_boiz336]

Question, what’s the best way to delete stock hand controls ? I emerge from one on your videos that they’re like made together

[@MOPBOYZ]

gotta buy new brake levers usually and or throttle if yours has throttle cknected

[@JuokuKarusele]

Yoo how to get compression back on aprillia sr 50? Cuz rn i can't start it.

[@MOPBOYZ]

top end rebuild, new piston and rings

[@justincordova1597]

You should do a video on a bintelli beast .

[@shay_mx34]

What’d you do with the kill switch when replacing throttle

[@shay_mx34]

And mirror

[@MOPBOYZ]

got ride of it ! key is the killswitch now ahha

[@shay_mx34]

@@MOPBOYZoh ok interesting, I’d like to do that to mine I’d have to get rid of both mirrors and the kill switch though…

[@niels8593]

Are the stickers from 0:07 comming back? That #Mopboyz sticker?

[@MOPBOYZ]

maybe i’ll do them again

[@niels8593]

@@MOPBOYZ 👌🏻❤

[@ghoysti2791]

Good video

[@MOPBOYZ]

thank you dude!

[@andreastennebekk370]

What rear brake you running?

[@MOPBOYZ]

malossi

[@yhapsoueuvaz162]

here do you get the fuel lock?

[@MOPBOYZ]

fuel petcock from scooterswapshop

[@yhapsoueuvaz162]

@@MOPBOYZ very thx

[@malte_wallin7536]

Are those bars pitbike bars or some special scooter ones?

[@MOPBOYZ]

pro taper minis !

[@malte_wallin7536]

@@MOPBOYZ thanks bro

[@Danny.-----.----.---.--.-.]

whats the quick throttle called been looking for a good one

[@MOPBOYZ]

ncy

[@nastynatesscooters9896]

🔥

[@coreylancaster4917]

What throttle is that? Link?

[@MOPBOYZ]

ncy

[@MrPotSmoke]

yurrrrr

[@andyproctor3588]

She's going to be sweet!!!👍👍

[@marekuszkiewicz1796]

FAJNY ZLOM

[@__Nelson__]

😍

[@milli6948]

Yo I got the same color doberman

[@MOPBOYZ]

fawn babies 🤙🏼

[@515.Outdoors]

hey by any chance have you check you business email i sent one asking a question to if you know to fix

[@MOPBOYZ]

sorry sir but that email is for business inquiries only. feel free to comment any issues you’re having with your scoot and other users or myself might have some suggestions for you

[@515.Outdoors]

@@MOPBOYZ ok so my moped its a 1990 sa50 elite 50 lx and i got a problem with it starting it wont start we got gas air and compression does anyone know what it could possible the stater?

[@Postalguy1]

Can you get a 4 stroke Chinese shitter ? So us who can’t find these Zuma ( 🇬🇧) can work in there bikes with confidence 🤣 I’ve a 4 stroke bike and it’s fucking slow man

[@hadikaddoura9423]

first

[@АнгулиАчмиз-п1ч]

🔥🛵🚀💪🤙😉🤚

[@GabrielSantana-th9nz]

No more 4 stroke moped videos the 4 stroke mopeds really died on this channel u should bring em back

[@dv020]

nah man 4stroke is dead , 2stroke is the way👍

[@GabrielSantana-th9nz]

@@dv020 u must be trippin 🤣ok buddy

[@leoclifford689]

9:55 too stiff and too long

[@powchainsamaniego6744]

🤣🤣🤣 lame scooter boys

[@bp-tuningaeroxlc-dd6474]

How Big er the Caburator on the White scooter , and How Big ist the Caburator on the Yamaha Zuma you ar bulding ..

[@MOPBOYZ]

same carb same size

[@DJLinux]

Solid build🫡

[@MOPBOYZ]

yessir