I just did this by using an old hacksaw blade and grinding it down. the thin metal you use has to be very thin but strong like an old clock spring. or obviously like I used an old hacksaw blade ground down. it works a treat. thanks for the video mate
@joshhayl74596 жыл бұрын
To: dave Scopes, You must have a really cheap lock for something the thickness of a hacksaw blade to get into, also, hacksaw blades deform and hold their Bend unlike these tools which are made out of steel with a higher temper so it flexes back rather than holding the bend on minor curves.
@ayerjake10 жыл бұрын
skip to 4:30 to get it over with
@leomorgan31059 жыл бұрын
+Jake Meoff Damn, a six plus minute video for, maybe, six seconds of info.
@A10DoubleHelix9 жыл бұрын
+Jake Meoff LOL
@Bladerunner49247649 жыл бұрын
+Jake Meoff Some people like to hear themselves talk...I guess.
@mcdril50768 жыл бұрын
+Jake Geoff Yess fuck! it took him tooooo damn long to explain it!!
@unknown-me6hu8 жыл бұрын
thx man he was talking way to much
@cristaa14913 жыл бұрын
IT WORKS! I tried 2 other video's and the first one I ended up injuring myself twice, and the second wasn't even close. I was so excited I did a happy dance lol
@tonytjobrien86118 жыл бұрын
Should you remember the combination after using the recorder will the lock function normally?
@regexRex8 жыл бұрын
What's the difference between the EZ Decoder and the Quick Stick?
@readysetsleep8 жыл бұрын
Use a hair clip it's cheaper..
@thmpick8 жыл бұрын
I have one of these locks and lost the combo over 4 years ago but kept it.... If I open it with your tool, will I be able to assign it a new combination? I went to your site but can't find the 2 piece pack you mentioned...only a kit with other things I have no idea what they are. Do you still offer the 2 pack mentioned here? I would like to bring our old lock back to life if I could? Thanks
@Draftmission11 жыл бұрын
For those who only want to see him open the lock: 4:07
@Buick_GSX11 жыл бұрын
no, at 4:38
@jgarb212 ай бұрын
Once open can you reset the combination without knowing the previous Combinatino that you bi-passed?
@gqusaf2 ай бұрын
Any way of resetting combo after picking it open (without knowing the original combo)?
@cacambell728 жыл бұрын
Hold the damn lock still!
@JAIMOUStheFAMOUS3 ай бұрын
😂😂😂☠️☠️ I just died laughing so hard at this! The first comment like I agree, then this one he just skipped the whole “ thank u for the info “ and went right to the point no fluff, talking shit , just “HOLD THAT MF LOCK STEADY!! Period. I was thinking just that, as I came to the comment section! Lol
@inthego11 жыл бұрын
so.. what lock do you Brian, use for your gym lock? Tell me that.
@smgri8 жыл бұрын
cool ..thanks ...what about a 3 roller briefcase lock,,,would that work!?
@annwithaplan97668 жыл бұрын
+scott garvey I was given a briefcase with a lock on each side and not combo. So I sat for an hour or two moving the numbers into all the different sequences starting with 000 until I got the right combo! It would have helped if there was an easier way. I also have a bike lock I'd like decoded.
@smgri8 жыл бұрын
yea i gotcha...must take a while that way i would think
@annwithaplan97668 жыл бұрын
"no combo". Yes, it took awhile and I tried that method with the bike lock, but it has four numbers and I gave up haha. Once I find the lock I will try it out.
@smgri8 жыл бұрын
there is always the pry bar
@punishrs9 жыл бұрын
will this method work on brinks brand of lock? .looks similar I have one I can't open..tired changing combination and goofed...old combination and new one I thought I was setting does not work now..
@jgilbertg57196 ай бұрын
What if the lock doesn’t depress at all before you try to pry? Bought this product but can’t get it to work
@nw1911guy11 жыл бұрын
So how does it decide the lock? Was hoping for a way to figure out a lost combination.
@dirkdiggler24304 жыл бұрын
How do you figure out the combination after you open it?
@miguelfoullie79175 жыл бұрын
Once you open the lock with the bypass tool can you use the reset key to enter a new combination or does that only work if you have the original combination entered on the wheels. Thanks
@Covert_Op Жыл бұрын
Damn good question
@rc_youtubeaccount13319 жыл бұрын
what are the tricks to ensure it shall ne inserted into the third slot and the left side?
@BTC_DNA9 жыл бұрын
I appreciate the info, but please calm down w/ the motions and move slowly. Such rapid and erratic motions with your hands and the prop are distracting. When in doubt, move slowly, move clearly, and move simply. Thanks much!
@Robin-gf7bd Жыл бұрын
Does that work on a suitcase combination lock? Specifically a Hartmann vintage suitcase.
@dragonusmc031111 жыл бұрын
kool vid are there any pick proof locks u can use for a gym locker....?
@ledosecur10 ай бұрын
Hi mister! What I should if I don't have that kind of key?
@Mur-lock687 жыл бұрын
Hi Purchased 2 sets from you same lock doesn't come close to working was careful but broke 2 material is crap minimal resistance and it folds up like a cheap lawn chair! Your lock was either prepped for video or something is up! Let me know what you think I review these products and write fair reviews I mean I paid good money for them. Just by watching video i see plenty of clearance on your lock same Master 175 mine is so tight impossible!! Thanks
@marvinbenson56553 жыл бұрын
please indicate how to obtain this tool. Could not hear what was said at end of video.
@reg42810 жыл бұрын
What's the difference between the ez decoder and the quick sticks?
@haconosopit39162 жыл бұрын
I have the same padlock.. after i set the correct combination, why i have to press 2 or 3 time to open the padlock.? I think theres a malmechanism in my padlock.. could you help me to solve it?
@afb51411 жыл бұрын
ITS Tactical , Can could these also be used as quick sticks, I can't see any difference between them?
@EristiCat7 жыл бұрын
I bought a brand new 175 lock a month ago. Since all these videos (yours and many others) have been posted MasterLock must have read them and redesigned these locks. They seem to have tightened up the tolerances plus addes some kind of internal block to prevent even thin shims from being slid in. Even using a piece of a coke can I can't get it past much of anything. Also tried decoding the wheels with a thin shim looking for the one where the shim goes deeper but they all seem to be the same depth.
@johnhebberd22482 жыл бұрын
Yup, bought this tool, found out it won't work anymore. Waste of money.
@CheddarCheeseBandit2 жыл бұрын
@@johnhebberd2248 it works on older ones. There are millions out in the world, keep it in your tools. It’s not very heavy.
@srr9281 Жыл бұрын
@@johnhebberd2248 Same experience, May 2023. Lock included with ITS kit even looks a little different, the shims included are [also] shorter than the one shown in the video. Sad.
@johnsnow6252 жыл бұрын
Is it possible to use this same technique on a combination gun trigger lock?
@beansoup60568 жыл бұрын
would like to order the ez decoder but couldn't understand the website you mentioned. if someone understood could you please send it in comments thank you.
@johnglauser80111 жыл бұрын
Des this work and how, on a briefcase or security case which yo have forgotten the code. i have a case (my own) that has 2 set of 3 dial combos. and i would love to see what i have forgotten. other personal situations - all my own! suggestions? thanks
@nicoscience11 жыл бұрын
can you use a quick stick to unlock a multiwheel lock
@MrJessieJames20108 жыл бұрын
When do we get to see the decoding part? Using a pick to open a lock is picking a lock.
@joshmullins48279 жыл бұрын
Is this the same thing used in the other video to open the tall blue lock
@shawnhunt23324 жыл бұрын
How about figuring out the combination numbers, after you unlock it ??
@texasarchery99924 жыл бұрын
After you open the lock, can you set a new combo?
@petercousins16455 жыл бұрын
Doubt if this will work on a Squire 5 reel lock
@_mattlux_95254 жыл бұрын
is this not just a shank bypass not rlly decoding is it ? and i have been told thats a good way to break a decoder
@crazyd3mon9688 жыл бұрын
Scam School showed a similar bypass technique with this particular kind of lock however they made it seem much more fun
@Jackjack53010 жыл бұрын
Put it in, push down! Thats all you needed to say
@mickb422110 жыл бұрын
Nice to know why I am pushing it in and pushing down, have several of these locks floating about locked. Have the reset key but they have to be open first.
@AdrianWeber11 жыл бұрын
Anchor Las is also offering very neat padlocks.
@CrimsonRaven51 Жыл бұрын
Can I buy a combo lock with the cut out area for practice?
@burtwar35346 жыл бұрын
Can you use a cut up aluminum can for the lever??? Or does it need to be steel???
@majikdragon9 жыл бұрын
Is that a master 175? because I just made one of those with a feeler gauge and that didn't work...
@MrSQUIDWAZherE11 жыл бұрын
is this possible to do with a nail filer or a bobby pin/ paper clip?
@austinstrate68804 жыл бұрын
Will this work for any combination lock?
@billa47615 жыл бұрын
The ones I ordered won’t fit between the lock and the dial.
@themadhacker937611 жыл бұрын
lost the combination to my bike lock when i was younger, fortunately i lived next to the tracks so i found an old rail road spike. we were also building a brick patio so we had spare bricks...not hard to solve the equation
@beotheguitarist7 жыл бұрын
Does this tool work with the Sesamee combination padlock also?
@mikebenincasa908110 жыл бұрын
What watch is that you are wearing?
@bronsonstephens579910 жыл бұрын
How do you figure out the combo?!?
@EviLNox810 жыл бұрын
the combo is 42
@wikieditspam10 жыл бұрын
Be sure to drink your Ovaltine.
@ckay110029 жыл бұрын
Darude - Sandstorm
@pipitfarlouze9 жыл бұрын
I have one of these locks but it is open and I don't have the combo because the digits have moved. How do I "refind" the right combination so I can lock it ?
@pipitfarlouze9 жыл бұрын
metalhead2508 but that will work only without the code haha I want to lock it the normal way and open it the normal way if I can say it like this. Do you see what I mean ?
@pipitfarlouze9 жыл бұрын
Ok thanks :)
@johnwebb2210 жыл бұрын
I found a 4-number dial combo lock in the military 45 years ago that was being thrown out. First number is dialed to the left. Any idea how to figure it out? I had another like it that I opened just by twirling the dial a few times. Don't seem to be able to do that with this one.
@nintendobacon110 жыл бұрын
this is a perfect example of what my dad always said, "every lock, no matter how tough or complicated, it will always be a deterrent
@LessTalkMoreDelicious8 жыл бұрын
Is the Sesamee AB410 the same and easy to bypass, or is it pretty secure? I'm looking for a new small padlock I can travel with.
@jaredmccullough4118 жыл бұрын
Does that work for the locks that have the combo on the side instead of the bottom?
@albert432123411 жыл бұрын
does it work the same with 3 digit lock?
@jeffackerman633310 жыл бұрын
can you open a Master Lock M40XDWD disc combination lick with 4 wheels & letters instead of numbers?
@Deekthagnome11 жыл бұрын
I wonder if this same tool and concept would work with luggage locks that are multi-wheeled combos also? (mainly briefcases)
@devenbethel0611 жыл бұрын
yes it does
@cerealkiller31759 жыл бұрын
Does it work on luggages?
@rolanddeschain76711 жыл бұрын
o my question is this technique seems rather particular to band/model. Does this tool work with all/most multi-wheel combination locks?
@frazzle657 Жыл бұрын
It doesn't state the thickness on your website
@bradeneskew41549 жыл бұрын
Where did you get that piece of metal?
@redhat43634 жыл бұрын
What if the lock is kinda rusted?
@metatechnologist9 жыл бұрын
Thanks for the video. However I got dizzy trying to watch as you moved the lock around so much. It would be far better if you put the lock in a vise and point to things. Look at bosnianbill's excellent videos.
@barburous10 жыл бұрын
"Its probably hard for you to see this" well in that case try holding the lock still FFS.
@andrewroney29876 жыл бұрын
Does this work on a cabinet lock with combo wheels?
@charliejames37385 жыл бұрын
would something .015 be to thick
@TheMattd5467 жыл бұрын
Doesn't the ez decoder also open up most pad locks that are not a combo lock?
@johnheilig93275 жыл бұрын
Will this work with a sesame lock as well?
@jaybuiifan27248 жыл бұрын
Can you use a paperclip
@toddwilliams41849 жыл бұрын
Hmm do you thinks strong magnet could pull the bar back?
@BigRalphSmith9 жыл бұрын
Bender Tonite I doubt the bar is made of a ferrous metal. Even if it is, the gauss strength required to exert sufficient force on such a small volume of metal would be incredible. I doubt such a magnet, even rare earth or electro, even exists.
@JAIMOUStheFAMOUS3 ай бұрын
Hey good clear info. Thanks. But hey do u watch LPL KZbin videos? We’ll probably but it’s worth mentioning that. Maybe you should invest in a good vice like he uses to hold his lock at the perfect position and focuses the camera at an angle that you can see precisely what he’s doing during the demonstration. of how precisely he’s manipulating the lock lock
@kristopherburkholder93668 жыл бұрын
regardless of the combination ,if you hold the lock so the numbers are right side up with the code set to four zeros , pinch the shackle in then boot heal or a large stick hit the lock hard on the side which should be facing up and knock it out of your hand . if you do this correctly it will open every time without breaking the lock , and it will relock . do not use metal to hit the lock, a stick about the size of a hammer handle is perfect . works on most locks this style...
@jordanbigpimp6538 Жыл бұрын
Ima need a video bro
@RoyUnger9 жыл бұрын
does a modified smart key work?
@lotwright96109 жыл бұрын
Use a soda can to pick it
@lotwright96109 жыл бұрын
I mean bypass
@lp115lp10 жыл бұрын
Try holding the lock still so people can see what you're doing.
@hyperion914210 жыл бұрын
I know, right?! Poor presentation just for the lock moving around!!!
@lp115lp10 жыл бұрын
Ok, guess it's just "on me" and my shaky eyes.
@siegfriedpueschel95813 жыл бұрын
I can't get your web page to load.
@noahcook90648 жыл бұрын
does it work with a paperclip
@user-rw3qq2sr1z10 жыл бұрын
- What is the thickness of the "decoder"? - Will the decoder work in any other lock, brand? - Will the decoder work next to any dial on the lock (all that needs to be done is to lift that internal locking bar)?
@j.morrison734 жыл бұрын
It will be a lot faster and easier just to cut the lock with bolt cutter, assuming you have to search/send away and pay for this special 'tool'. Using this doesn't save the lock because you still don't have the combination. And you can't reset the combo, even if it's open, unless it's on the comb to begin with. With that said, those that made comments about the video being too long, or fidgeting, think back to grammar school doing math work. teacher wasn't satisfied with the answer, they wanted to see how you got to it. Ending, I think it would be just as and more important to us is if you gave the dimensions and thickness of the tool. It would eliminate a week or so sending away for one.
@thomashassett12599 жыл бұрын
Sooo where can we get one of those!?
@LoderMike8 жыл бұрын
can the code be re set once open?
@biosaber58511 жыл бұрын
I cant seem to find a video that shows how to open a multi wheel lock because I have an old safe that is a three number code that I dont know of and dont really want to use tools. its a three digit code and then its a twist open so I need to know how to open it, no one knows how though
@biosaber58511 жыл бұрын
Frank Christian uh well I dont really know, it was a gift from a friend and its just a simple combonation lock from the looks
@KBMB472 жыл бұрын
I just ordered the tool…..thank you WW
@theartfuldodger93510 жыл бұрын
This video literally could have been 20 seconds long.
@FuckBitches831 Жыл бұрын
Yeah, but, skull fucking, aneurysm growing, needless repetition is what gives the dipshit masses, I mean dumber foke the ability to learn. 😊
@Tarakian1999 Жыл бұрын
The only one who made you watch it is you. You wasted your own time.
@Durttar69511 ай бұрын
LOLOL, me and 200 other folks agree with U, @artful 👍🏿💤😡 RIP
@Ultimate_nutmaster6911 ай бұрын
That'd why it's on shorts
@MacMashPotato9 жыл бұрын
Ironic would mean that its hard to do with the easy decoder. 4:40 Verbiage is important when advertising your product.
@fearlessfred896 жыл бұрын
My lock won't allow any tool to fit next to the third dial no matter how thin you make the tool. I machined the tool to the point where it was as thin as a piece of paper and it collapsed and broke I have up on shimming .. The single dial method worked
@gajananphadte34407 жыл бұрын
There is but one issue, not very serious. Which side is up for push it up.
@mfx111 жыл бұрын
Agreed with the comments about how long this is, don't want to put you off posting these videos as the content is good but you tend to beat around the bush, repeat yourself too much and spend far to long just getting to the point (not just on this video either), please take this as friendly constructive criticism.
@ITStactical11 жыл бұрын
Check out Abloy locks, they're good to go. ~ Bryan
@DarkShiftMusic11 жыл бұрын
You say brief video... but I see a 6 minute video on how to push a super thin piece of steel in a certain direction.
@luckyluch80810 жыл бұрын
hay whats up.. i use these sticks for work as a foreclosure inspector and they are great. but i just ran into a brand new combo lock with a new blocking device installed to stop the stick :-(.. u guys need to make something to bypass the new system :-)
@michealbeers77710 жыл бұрын
....I fell asleep waiting for you to actually show us how to pick the lock!
@mikecummings47154 жыл бұрын
If you can't last 6 minutes your girlfriend must be disappointed
@ricstormwolf3 жыл бұрын
I've seen some of his other videos. He does kinda explain things in a little too much detail, doesn't he?
@Atlas2552 жыл бұрын
@@mikecummings4715 damn that’s an amazing insult.
@mikesimms452511 жыл бұрын
Besides agreeing with others about all the yakking and constant lock flipping, I have another comment. YES it's a bypass tool but it DOES NOT seem to earn the name, "decoder." There's no decoding !!! However, thanks for the bypass info.
@mattlaptop57286 жыл бұрын
Question : What is the thickness of the “easy decoder” ?
@rickrodriguez35478 жыл бұрын
were can i find that tool
@shycourgette6 жыл бұрын
Dude thanks so much for this video. You saved me this morning when my lock was not working. Amazing, thank you so much,
@philip948711 жыл бұрын
i can pick that one number at a time and you listen for the diff sounds telll you hear the right sound too open it :)
@laospeedwagon3023 Жыл бұрын
I’ll agree that this video could have been a LOT shorter, but my question is this: Hasn’t the Masterlock 175 been replaced already by the 875 which cannot be bypassed?
@KBMB472 жыл бұрын
I thought you was a great video and explained excellently.