ITX or MATX SFF Style Thermaltake Tower 200 TG Airflow PC Case

#thermaltakeuk #thermaltake #matx #pccases #thermaltaketower
ITX or MATX SFF Style Thermaltake Tower 200 TG Airflow PC Case
Available from affiliate links:
Amazon Local: amzn.to/3s6suyY
Ebay UK: ebay.us/hNrkub
Ebay US: ebay.us/PtesOy
Ebay CA: ebay.us/xeflO7
Ebay AUS: ebay.us/Smzr36
Or direct: uk.thermaltake.com/tower-200-...
www.scan.co.uk/products/therm...
About this item
Iconic Vertical Body Design
Supports up to a 280mm Radiator
Two CT140 PC Cooling Fans Pre-installed
Enough internal space to accommodate GPU up to 380mm in length
The Tower 200 is a ITX or MATX PC case with many improvements over the Tower 100 that is shares a lot of it's design from but Thermaltake have listened to customer and reviewer feedback and made some significant changes to make the build and general usage far easier and convenient.
Now you can fit a large GPU such as the RTX4090 easily with almost 400mm of clearance, and up to quad slot PCIe.
The top section is easily removeable without the need to undo multiple screws. The sides now pop off and the part glass part filter has been replaced with full size filters left and right with a TG display window in the front.
Some great changes to a new small footprint case that should make it on your shortlist for a ITX or Micro ATX custom PC build.
Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdkeys.com/mikesun...
Discount code: MIKESUNBOXING 7.5% Off
PC Chassis Unboxings Playlist: • PC Chassis Unboxings
Unboxing Playlist: • Unboxing
Computer Cases Playlist: • Computer cases
Computers & Gaming Playlist: • Computers And Gaming
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
KZbin membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshirt.co.uk/mikesu...
North Americas: shop.spreadshirt.com/mikesunb...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com/shop/mikesunbo...
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus.energy/rose-gro...
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.mention-me.com/m/ol...
Pay For Items Monthly: www.shopabunda.com/?ref=mikes...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlink.com/589.html
www.premiumcdkeys.com/mikesun... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.com/?rfsn=261416...
Get in touch with us:
Email [e-mail]
KZbin / mikesunboxing
Website www.mikesunboxing.com
Discord: / discord

[@mikesunboxing]

Available from affiliate links: Amazon Local: amzn.to/3s6suyY Ebay UK: ebay.us/hNrkub Ebay US: ebay.us/PtesOy Ebay CA: ebay.us/xeflO7 Ebay AUS: ebay.us/Smzr36 Or direct: uk.thermaltake.com/tower-200-mini-chassis.html www.scan.co.uk/products/thermaltake-the-tower-200-black-mini-chassis-w-tempered-glass-window-2x-140mm-fans-usb-32-type-c-min

[@daveaitken92]

Seems like they've really worked hard to make this a step up! The look still isn't quite for me but I can see the qualities of it and why people would love it :)

[@uglybob7505]

Flippin LOVE the Tower series ! Great to see a change from the norm. Aye it costs a bit more but look at it....its GORGEOUS !

[@mikesunboxing]

it is a much better option than the tower 100 for the increased flexibility, definitely one for the short list when building MATX or ITX

[@PaulBakewell]

This is my sort of case! Great video thanks Mike.

[@mikesunboxing]

Glad you liked it! not a bad price either and plenty of room

[@Gates-Tech]

thanks for the review, will receive this case today cant wait!

[@mikesunboxing]

Hope you enjoy it! Post some build pics on the discord

[@Senrab46]

Very interesting case and the design and quality shines thru. I did get confused over airflow as gpu fans blowing against inlet yet you proved it cooler and faster👍One to consider wen replace my F15! Thanks for reviewing Mike and Kath 🐈👍

[@GeordiLaForgery]

Nice. On my Tower 100 the magnetic rear slip cover works well catching dust as I use a 140mm fan intake so it blows cool air on the back mobo where a m.2 nvme sits nicely.

[@PapaMav]

Luv the name.

[@roythunderplump]

Great look at the Thermaltake case. Low profile 15mm thick fans will work a treat in these smaller cases to help with clearance.

[@mikesunboxing]

good idea

[@WilliamAndrewPhilipBodie]

Mike's Review is Worthy of a Support comment. Like & a share 🙂

[@mikesunboxing]

thanks and guten morgan

[@PapaMav]

I am full support of Will's Support Comment !

[@WilliamAndrewPhilipBodie]

@@mikesunboxing We only use Moin here 😀 but Moin to you too 😀

[@rickh8380]

Real nice case. If a PC case does not come in white... I'm not interested. Much easier to build in with these old eyes.This case in white looks real nice. Amazon US is selling it for $129.99. Thank you Thermaltake for sending it over for Mike and Lady Kath to review. Thanks for sharing guys. Take care. Cheers

[@mikesunboxing]

lots of colours have just been released also 6 in total i think

[@rickh8380]

@@mikesunboxing Thanks Mike. I did see the white one. I really like that color. See you in the Stream. Cheers

[@mikesunboxing]

See you later Rick!@@rickh8380

[@brlowe1]

Great review of the case. Thank you. I ordered my Tower 200 with the LCD display and it will be here in a couple days. Wish I had a 4090 to put in it but my 3080ti should fit nicely. Looking forward to the build.

[@mikesunboxing]

hope it all goes well,, what colour did you go for?

[@brlowe1]

@@mikesunboxing I went for the Racing Green. I have built so many black computers I thought green would be nice for a change.

[@darren990]

nice mike very nice

[@mikesunboxing]

thanks darren

[@chishingchan6069]

I finished a build on tower 200. Negative pressure, 280 AIO for exhaust. and 3 140 fan for exhaust. Utilize all filters surface to pull air.. I have removed the right panel filter as you did, then block the non fan blowing area to avoid sucking back air from the right panel.

[@mikesunboxing]

What are your overall thoughts on the case and the build in general

[@chishingchan6069]

@@mikesunboxing I just failed, the fan flow idea is not working. VRM overheat. Finally I put back the filter. 280AIO+ 3 140 FAN are still doing exhaust. The right panel will suck air to VRM... Don't Block the side panel for Exhaust setting...

[@Jasontyo]

I love Micro ATX I didnt realize the 200 was mATX now. I want one.

[@mikesunboxing]

well it isn't officially MATX but there are many reports of boards fitting

[@Doobie3010]

Would make good testbench,if stripped of all the panels,and was half the price!

[@patricklebel1141]

I just bought a MSI PRO A620M-E ProSeries for 96$ cad (open box, will see!) and 32gb of ddr5 6000 for 117$cad. Now, I need to find a cheap CPU to try it and that would have make a nice case for it. But I have an empty case here that does nothing, so i will use it. But this case is really nice and a change from rectangular case! 👍

[@mikesunboxing]

i like it, the option for MATX or ITX in such a small footprint is awesome

[@gscurd75]

Should be noted that matx will not allow larger GPUs like the 4080 or 4090 unless you water cool.

[@dunknowanything]

Thinking of using this case for a build. Can you comment on the fan header situation? Since we’re dealing with itx boards I worry with all the case fans, aio, additional intake, etc. most mobo’s gonna have 2-3 fan headers at best. Probably a good idea to grab a few fan splitters yeah?

[@mikesunboxing]

the included fans are 4 pin pwm, so a hub or splitter might be useful for some motherboards if they lack ports

[@markberry8182]

I dont think this case is my cup of tea tbh but another great vid mike useful for someone buying this to do a build 👍⭐💪

[@mikesunboxing]

Fair enough!

[@markotto1767]

great review. What about putting the right side bottom fan on the psu shroud and not on the right side to make a better chimney effect ?

[@mikesunboxing]

yeah that wound probably help a bit, thanks for the comment and watching the video

[@markotto1767]

@nboxing i read about some graphic cards have temperature problems when mounted in this vertical position cause heat pipes sistem doesn't work in the perfect way. What do you think ? Can you measure the max tickness of the graphic card retemption sistem (bracket) can handle, please ? Thanks in advance.

[@IamLookingforWoody_________786]

You also needs a solid and strong wood table to keep this heavy cabinet.

[@mikesunboxing]

it isn't actually that heavy, around 8KG empty

[@PapaMav]

I don't like the case, but I like Mike & Kath, so I have added a LIKE.

[@mikesunboxing]

Thanks 🙏

[@justatim8143]

I like the case but the only thing I don't like is is no screws to hold the panels down as I carry my case to the back porch to clean every 3 months. If I bump the front panel wrong while carrying it would fall to the floor just like the sides. There should be a way to lock the down so they don't fall out. Like that they use real screens for dust filters.

[@mikesunboxing]

why not take the panels off before you move it?

[@justatim8143]

Should not have to and if I just moved my case and they fall of when I just wanted to dust around it who's fault would it be as they should be secured all the time.@@mikesunboxing

[@Zequintiny]

Does this really support a micro ATX board? Their website says it doesn't.

[@mikesunboxing]

yes but front panel io connections are tricky to wire up against the GPU side edge

[@WL9966]

Got a question, if I may. Do you prefer the intake for GPU paired with intake or output for the CPU AIO? Thanks

[@mikesunboxing]

i am not sure exactly what you are asking sorry. are you asking if i would add more fans to the gpu side as an intake? i don't think it is possible

[@Ornal64]

This case is asking for right side AIO exhaust. Bottom and back(when possible 2 fans) intake, top exhaust.

[@wolfpackflt670]

If the motherboard has onboard wifi, will the antenna get in the way of the top lid?

[@mikesunboxing]

no you should be able to point them to avoid that

[@kun4mibl4st55]

Any suggestion if I would want to add a 360mm...can the shroud be removed? thanks

[@mikesunboxing]

Pretty sure without a lot of modding a 280mm is the biggest in here

[@kun4mibl4st55]

Thank you, on some videos it shows to have a couple screws in the back that could possibly be to remove the plate on top of the psu...

[@AlexHusTech]

*Great video, looks like a fridge/vending machine quite quirky*

[@mikesunboxing]

Yes it is a bit different which is something the pc industry needs

[@poundrick]

Did you not try with an intake fan on the bottom of the case?

[@mikesunboxing]

No I didn’t this time

[@poundrick]

@@mikesunboxing I wonder what effect it would have on the thermals? Love this case it’s awesome.

[@mikesunboxing]

@@poundrick it might improve things a bit, but thermals are always tricky to find out what is the best, trail and error is the answer

[@PapaMav]

Crap Joke Friday: Singing in the shower is fun until you get soap in your mouth. Then it's a soap opera.

[@mikesunboxing]

lol all in good taste

[@nescience78]

I'd hardly label it SFF

[@mikesunboxing]

yeah you might be right

[@ScottsHonestReviews]

Use a VPN next time.

[@mikesunboxing]

??

[@ScottsHonestReviews]

sorry was replying to someone else but had my tab open and commented wrong section lol @@mikesunboxing

[@uglybob7505]

CRAP JOKE FRIDAY !!!! My friends say I'm stingy, but I'm not buying it.

[@mikesunboxing]

unless drunk of course

[@PapaMav]

Good one Bob !