How to Demagnetize a Tool? - 4 Ways!!!

When tools or watches need to be demagnetized, the necessary equipment, such as a degaussing inductor, may not be at hand. In this case, you can use a regular magnet. The only condition is that your magnet must create a magnetic field that exceeds the magnitude of the magnetic field with which the object was magnetized. I use a neodymium magnet of class N35 or higher for this.
Telegram channel: t.me/Iuri_s_Workshop
#demagnetizer #tools

[@user-nx4nj3or5i]

Музыка такая как будто там происходит что-то героическое .

[@faces_of_terror]

Same

[@Mc_Nizzle]

Nice! Finally, a way to demagnetize my Rolex for free!

[@l5-cs.]

bro sucked out its soul 💀

[@jacobm3324]

The music made this video so much better, thank you.

[@worldwidegamers157]

How to remagnetize it

[@firstletterofthealphabet7308]

in demagnetization you dealign the magnetic fields of the object by spinning magnets or switching the poles on the magnets many times as you run it across the object, so if you want to remagnetize it, just run the magnet across the object without spinning it, realigning the poles

[@bxeagle3932]

You need arc reactor

[@mairimrrji4310]

Its not permanent thats just stay until that demagnetiser is in contact with it 😂😂

[@Akimov_Sergey]

Можно проще: ниодимовый магнит пркладываем к началу, например, отвёртки и ведём его до ручки - отвёртка намагничена. А если к этой, уже намагниченниой отвёртке так же к острию пркладываем магнит и ведём его в сторону ручки, НО до середины металлической части и отрываем магнит- всё, отвёртка не магнитит

[@lelabaz9375]

Тхтхттххх хттххх

[@LilyBloomVee]

Or just swipe any magnet from tip to handle a few times and boom, demagnetized.

[@igxniisan6996]

That will magnetize it lol 🤣

[@LilyBloomVee]

@@igxniisan6996 Then hold it right when you do it.

[@igxniisan6996]

@@LilyBloomVee well ur analogy is right but if u don't know the orientation with which it was priorly magnetized then you might end up making it more magnetized.

[@LilyBloomVee]

@@igxniisan6996 That I can agree with. However all the screwdrivers that I ever demagnetized required the magnet to go back, from tip to handle. From handle to tip always magnetized them.

[@igxniisan6996]

@@LilyBloomVee i see~

[@gregbullington891]

They sell these small cheap pieces of plastic with magnets in them that will magnetize or demagnetize , and they work really well. Any hardware store.

[@IurisWorkshop]

And there is such a profession - the buyer.

[@simonlinser8286]

i looked for this exact video, a few years ago! thank you

[@skaar312]

Thanks, really works 😎

[@AbhenandanJain]

3rd one actually works i tried it myself..

[@SantaDragon]

Thanks, great tips!

[@panavpasricha]

To remagnitize it just pass it through the middle of two like poles of neodhmium magnet facing each other. This creates perpendicular magnetic allignments in the metal.

[@pauloramosteles5609]

Nas eletrônicas que trabalhei havia bobinas desmagnetizadoras de tubo de raios catódicos eram feitas artesanalmente usando as próprias bobinas que equipavam essas tv's. Sua função era tirar manchas coloridas da tela da tv. Funcionava bem. Já para imantar ferramentas usávamos imãs permanente uma blz.

[@igxniisan6996]

I would never demagnetize cuz it's rly useful to me.

[@Arbitermiyo77]

How do i magnetize?

[@Ovezdurdy7755]

از اول میمالیدی بموهات بواسطه الکتریسیته ساکن مغناطیسی میشد🇹🇲🇹🇲🤗🤗🤗

[@rajeshsanadi3850]

how many of you thought that he would get an electric⚡ shock in this process

[@farzadmoradi7189]

Ok and now how to make it magnetic again

[@OhioMiloPsycho]

Due the music sounds like someone just won a war or something and you’re just demagnetizing things

[@IurisWorkshop]

I put this one in for my daughter. This music was used in our favorite, and maybe in your favorite movie - Die Hard.

[@Sanju_Kumar_aka_dream_catcher]

What you are seeing is not some tip. It's the origin of a villan story 💀

[@aliciachapman2956]

Just use a demag block tool thing

[@nark7167]

Может быть он просто из алюминия?

[@user-qd3bh2oi4x]

WoW!!!¡!!!

[@user-th5vg7gv1g]

前用鐵鋏，後用不銹鋼鋏

[@M4NZY]

yes, it's all cool and interesting, but I'm wondering how to magnetize it

[@marvel_sumanth1980]

The next minute he lost the tool 😹

[@jeremiah6995]

Can someone link the audio please?

[@KotikPowder]

Круто

[@tormekt8sulubilememakinesi288]

Why?

[@riteshnagar2916]

hii sir I am ac technition something upload related to air conditioner

[@thegumuwka3167]

Используйте цветные металлы)

[@SalityGen1]

Хочешь что то намагнитить - нагрей это и поднеси магнит. Хочешь что то размагнитить - просто нагрей это

[@burkin_alex]

думаю, в материаловедении я не силен, но понимаю как работает магнитное поле в металлах. Нагрев метал/магнит мы приводим в распорядок домены с однонаправленными спинами и магнитные свойства пропадают, а если после нагрева начнем намагничивать металл, то спины в доменах сонаправлятся вдоль магнитных линий, посколько если при температуре Кюри спины в доменах становяться "плавучими", они легче поддаются магнитному полю. Это всё что я вспомнил из университета)

[@Strongbodybrain]

I need to demagnatized😢, I accidently deop a small screw in a screw driver holder which is like pen and has magnet from inside... now screw is trapped inside that deep hole ... I don't know how to take it out😮

[@IurisWorkshop]

Use a thick match or a thin stick. Apply a little hot-melt adhesive to the end and carefully connect it to the screw in the recess. Wait for the hot melt glue to harden. You just need to try not to get the glue on the walls of the recess. You can also use thin tweezers with slits at the end in the form of two teeth. These tweezers are used when you need to securely hold a shaft, for example, a clock gear.

[@Strongbodybrain]

@@IurisWorkshop hey thankyou so much for your response. Actually I did the same thing after trying some tricks and I didn't expect a reply so soon so I kept on trying things . I used drawing compass needle and applied adhesive tape around the needle and put inside the hole and screw came out .. as i was unable to find out the liquid adhesive and screw was of mouse . I was checking mouse pcb

[@adriannedelcu7500]

Heat?

[@LossevSergey]

Нагревать нельзя - пинцет может перестать пружинить. Ибо закалённая сталь

[@firstletterofthealphabet7308]

nope, magnetic field alignment. the industrial demagger is just an electromagnet that switches poles rapidly as you run it across the object. since the poles don't align in the particles of the object, the entire object's magnetic field then is misshapen. when you run a magnet across it in one direction without swapping the poles, the object's particles' poles align again, and the object will have a working magnetic field again.

[@KnifKid]

USE A DAMN BLOW TORCH

[@eliomarmion5485]

Why this French music ?

[@pranavpatil1756]

Cant we just heat it untill it gets demagnetized ?

[@IurisWorkshop]

No you can not. You will damage not only the electroplating of the tool, but also its working edges.

[@Ovezdurdy7755]

خب عزیز من از اولش اون وسیله آهنیرو میمالیدی بموهایت بعد بواسطه الکتریسیته ساکن مغناطیسی میشد

[@SAMURAI_164]

Молодец, пинцет испортил...

[@IurisWorkshop]

Никогда не соглашайтесь на МРТ! ;)

[@snackgaming3512]

stainless bolt

[@TrippyFPV469]

OR, heat it up.

[@QuestWilliams]

I prefer to just throw it on the ground really hard

[@mody7977]

Its not work

[@keydach2044]

Коробочка в хозмаге. 120р. Не благодарите

[@amarnathpadmanabhan]

bro how to remgnetise it then

[@firstletterofthealphabet7308]

Run the magnet across it without spinning the magnet. This realigns the polarity of the particles and makes them attract things.

[@mdazharulislam2341]

Just heat a magnate

[@Mc_Nizzle]

Why should someone demagnetize a magnet?

[@user-ky6ec5jm6n]

Эта хрень не может сделать так чтобы метал стал вообще не проводить магнитное поле. Такое невозможно ФИЗИЧЕСКИ

[@burkin_alex]

есть такой металл, нержавейка) ну или сплавы алюминия или других не ферромагнитных металлов

[@IurisWorkshop]

Существует очень хороший титановый инструмент. Даже у меня есть один такой пинцет, который я использую при работе вблизи сильных магнитных полей. Например при ремонте громкоговорителей обычный стальной инструмент может разрушить подвижную систему динамика. Но у этого инструмента есть один большой недостаток - высокая цена.

[@samsun5313]

Come on! Guys, y r u wasting ur time in demagnatizing it, Instead use some hard plastic or wood tool.

[@2kado]

電子スピンの不均一化？

[@burkin_alex]

Уменьшение доменов в металле с однонаправленным спином

[@igor5771]

А наоборот?