IWI X95 Aftermarket Triggers, Do They Work???

We have been asked several times if the aftermarket IWI Tavor triggers, such as the Shooting Sight TAV-D, and Geissel Automatics Super Sabra work in the new IWI X95. The short answer is yes, but with some minor modifications. We go over what needed to been done to our x95 in order for the Shooting Sight TAV-D, and Geissele Super Sabra triggers to work properly.
Our Links
Website: www.tacticalexistence.com
Facebook: / tacticalexis. .
Twitter: / tacticalexist
Instagram: / tacticalexistence
Our Sponsors
MOD 1 Firearms: mod1firearms.com
Cook's Holsters: www.cooksholsters.com
Gear Head Works: www.gearheadworks.com
Black Dove Customs: www.blackdovecustoms.com
HomeLand Guns: / homelandguns
Shooting Sight: www.shootingsight.comWeddle's Guns: weddlesgunsh...

[@sweetcostarica]

The question is not _"after market triggers, do they work???"_ The real question is are they worth their cost (around $350 USD) vs necessity.

[@DistinctiveDestinations]

I wish someone would make a steel bolt release that was not only stronger than the plastic one but that would also accommodate the older packs.

[@deltaforceelite5301]

the meporlite sight I saw like that was facing the other way what is the difference in them

[@lawrencekatz5804]

I really glad that you described how you rectified the problem. I got my IWI X95 today and had the Geissele waiting to install. It was so bad that I could not rack it since it was stuck. After a few hours a attempting everything, but what you did, i reinstalled the original trigger pack and decided to call tomorrow. I will still call Geissele, but know how to rectify it if they do not have a solution.

[@stephenlozada7158]

Lawrence Katz what u figure out

[@TheKawasaki250]

​@Stephen Lozada watch the video bum.

[@808shane]

I just bought an x95 and really like your setup. Where did you get your optic and foregrip?

[@hellsscoutact5379]

Thanks good video.

[@bkwil6078]

To each his own but I'd never have that wire running right down near my trigger finger

[@nardyviado951]

whats the difference in trigger pull weight between the stock x95 trigger and geissele tac-D?

[@josephcurreri8603]

Nardy Viado approximately 3-4lbs

[@localguy8]

I have the Tavor SAR n I put the new X95 firing mechanism it supposed to give you a 5-6lbs trigger instead of the 11 lbs original n only cost $199.00

[@localguy8]

Yes it was easier to shoot so it’s more accurate, I have been shooting in a 9mm platform . I then changed it to my 556 kid . It workers like a charm

[@jameswoods13]

Do you know of any binary triggers for these guns?

[@AlexanderEddy]

What's that mlok handguard?

[@geezlepuss7863]

x95 worth the money? Expensive, but what alternative is there for a short length bullpup w/ short suppressor? The RatWorx suppressor for X95 9mm replaces the handguard with a handguard that includes a built in suppressor & adds only a little to the X95's length. Suppressor costly only $250 plus ATF stupid expenses & hoops: $200 tax, FFL 3rd class fee for transfer, finger print fees, passport foto fees, maybe parking fees. But what else is there for indoor security that doesn't blow your ears out in a bull pup?

[@Gizmo0331]

Curious where the individual learned how to do a functions check

[@Cubanb407]

x95 vs the rdb which one do you honestly enjoy shooting more?

[@TacticalexistenceTX]

+Cubanb407 I love the RDB, But at the moment I'm liking the s95 more.

[@Cubanb407]

Good to know. It would be cool if you did a shoot out between the two and see groupings as well as suppressor testing (gas face). Thanks for taking the time to answer me on this as well taking the time to put together the vids you do keep up the great work!

[@TacticalexistenceTX]

+Cubanb407 no problem, thanks for being a part of the TacticalExistence Family! We may do that, if we can find the time!

[@Guardian2A]

T/E did u install the Gear Head works Israeli style front sight as well? I was surprised to see that mini rail fit thats my current tavor setup with the Israeli style front sight mentioned before.

[@TacticalexistenceTX]

+Guardian no I haven't tried the front sight yet, got to love the short Razorback rail.

[@TacticalexistenceTX]

+Guardian I checked, and it looks like the Gear Head Works front sight won't work on the new x95

[@Guardian2A]

Yup, that's what I hear from the man himself on the forum, that's unfortunate. We'll have to wait and see what IWI and others offer in the future. Great vid about the possible upgrades though. I found out you can remove the hand guard to SBR it later, so I pulled the trigger on one today.

[@TacticalexistenceTX]

+Guardian we'll have an SBR video very soon!

[@SuperFame88]

first !!kinda knew there wounds be some trigger pack issues

[@Wedelj]

+Tim Mcd Apparenty the X95 trigger pack is the same as the Tavor's newer Gen-2 trigger, which means these modifications would need to be made to any newer Tavor also to put in an aftermarket trigger.

[@SuperFame88]

there are so many snag points on that rifle for my taste hide those cords bro lol

[@TacticalexistenceTX]

+Tim Mcd going to put the wires inside the handgaurd.

[@RC-tv4ye]

just wanted to know about the triggers, that's all!

[@geezlepuss7863]

How can the 3rd parties bring trigger packs to market & they don t git???

[@Muddyfox47]

I did an accuracy comparison video between the 2 triggers, Finally : kzbin.info/www/bejne/oYnZdHeOatGWZrM

[@kevinwilson9589]

Be careful with that file, IWI is currently out of stock on that item.

[@liberalqwerty4280]

If you are going to use your hands.....try not to distract everyone by moving them all over the place all the time and pointing and then pointing again, moving your hand away and then pointing again and again. Just point and leave it at that ! You did a perfect impression of Ricky Bobby when he didn't know what to do with his hands.

[@daddychill7776]

Fn needs to re-design the FS2000. If they made it a little more aesthetic, i cant imagine too many sales for IWI. The tavor and x95 is hideous.

[@TacticalexistenceTX]

+Machine Gun Haylift really? IWI sold over 55,000 Tavors in just a few years!

[@Wedelj]

+Machine Gun Haylift I'm with TE on this one. I agree that the FS2000 needs a make over, but even then I think it would have a hard time competing in the market against Tavors, X95s, RDBs (when they appear)... The FS2000 had 10 years to mature and grow on the market, but it never happened.

[@daddychill7776]

+Sunshine_Shooter Im just a FN fanboy i guess. I have a kel tec RFB. I would take it all day vs any other bullpup. Its been flawless for me.. 100% reliable. Theyre all ugly as hell.

[@TacticalexistenceTX]

+Machine Gun Haylift I love me some FN also! I like the looks of almost all the bullpups, I think it gives them a cool unique look.

[@pewpew9193]

​@@TacticalexistenceTX 7 year old comment, but I agree. I love Bullpups & weird rifles. My favorites are P90, X95, Vector, CX4 Storm (only in FDE), MDRx & the AUG.

[@KarmaTiger]

"Just like the Tavor" "Different than the Tavor" FFS read the side of your X95. It IS a Tavor. You lose credibility when you can't keep that straight.

[@TacticalexistenceTX]

The stupidity in this comment is staggering! Internet experts amaze me more and more everyday 😂 aftermarket trigger packs were redesigned to fit both the standard Tavor, and the X95.

[@TacticalexistenceTX]

The X95 was the next generation of the Tavor, not sure how you manage to not pick up on that when everyone else did. By the way I worked in IWI’s both at range day that year! Maybe that’ll reinstate my credibility 😂