Enough bezel kit removals can not only damage the mechanics of the original bezel, it can also strip the original bezels paint. The longer the bezel kit adheres to the original bezel, the more complicated/difficult the removal becomes. Using heat to attempt to loosen the adhesive is also of issue as electronics do not take kindly to extreme heat, not only the device but the battery itself. My advice would be to use caution and patience when removing bezel kit, slow as possible and refrain from heat. Floss is an excellent option to assist with removal and highly recommended. This video gives a very good example
@redemption8822 жыл бұрын
That's what I was afraid of,I know heat and electronics don't go but I knew once I try to take it off it's going to take some of the pain off smh might as well leave mine on permanently
@edgarsalas74952 жыл бұрын
Source??? Trust me bro
@TheHUhelps2 жыл бұрын
I finally tried this and it went well thanks to your video. One thing for people to keep in mind is that the space between the Ringke cover and the bezel is very thin and it's an easy mistake (at least for me it was) to get the floss under the bezel thinking that it's under the cover. You just have to look real closely too see the fine line between the two. Also, unwaxed floss is probably better as it won't leave a residue.
@c.williams58603 жыл бұрын
This was a great tip. I ordered the Galaxy Watch 3 & I'm trading in my original Galaxy Watch, which I put a rhinestone bezel on. It took about 2 minutes using the floss to remove the rhinestone bezel, which I had on for 5 months & clean the small smeck of glue with Windex. Looks perfect. Thank you 😊
@ac_junior72 Жыл бұрын
Thanks for this! I still wear my old Samsung 46mm, custom bezel has been on this for almost 4 years now...time for a change I think. That adhesive has been impressive all these years...floss, no problem, glad I don't need some heat gun for this. Thanks for the video again, Happy New Year!
@chrisallen79565 жыл бұрын
You've saved my life mate. Bought the parts on eBay for 7 quid. Your vid made it super easy to put it back together. Cheers mate👍
@TheJabberTech5 жыл бұрын
Glad to help brother
@kmsharley754 жыл бұрын
I like the stock bezel better than both. Love your videos though,been binging on them since I bought my Galaxy Watch two weeks ago. Bought two Barton bands thanks to you and I'm not done yet!
@TheJabberTech4 жыл бұрын
Awesome dude!!! Thanks for your support and keep customizing!!
@williamballmaier23554 жыл бұрын
Thank you so much for the video! Love my watch and now I've gotten to love this Stainless band. But I have the Ringke black bezel. Ordered the SS bezel to match the band. You've put my mind at ease. Thanks for that! -B
@tommyudg3 жыл бұрын
Greetings. Thanks for the helpful video. Instead of dental floss, I used a thin guitar pick, it worked perfect. 😉
@Darklighter435 жыл бұрын
Wow, I'm not to sure if I want to try removing mine after watching you do it. Looks like one little slip and the original bezel might come off too. Maybe rubbing alcohol to soften the adhesive?
@TheJabberTech5 жыл бұрын
U could use a hair dryer to warm up the glue, that would make it easier
@interccessorful3 жыл бұрын
I used a blow dryer and and my liscence. Was much easier that way.
@cyiaslappy85963 жыл бұрын
Don't discard the old bezel cover. You can use Elmer's Rubber Cement to reattach later. Rubber Cement adheres well but is also removable.
@TheJabberTech3 жыл бұрын
Good to know! Thnx
@rayr.63502 жыл бұрын
Great tip, thank you! 👍🏼👍🏼...btw, what's the name of the watch face you have in the viedo?
@TheJabberTech2 жыл бұрын
Almost 3 years later,no idea bruh 😂
@rayr.63502 жыл бұрын
@@TheJabberTech 🤣🤣, true, no problem, thank you anyways! 🤣🤣🤣
@TheJabberTech2 жыл бұрын
did you check the description? I usually put it there
@rayr.63502 жыл бұрын
@@TheJabberTech i think i did, but let me double check
@rayr.63502 жыл бұрын
@@TheJabberTech you were right, it's there 🤦🏻♂️i think it's time to get me some glasses 🤣..thanks for the reply
@carmendewa24494 жыл бұрын
Love the first one you had on not a huge fan of the yellow, but thanks for instructions, Cheers 😉💯🇦🇺
@Pro1er3 жыл бұрын
I ordered a bunch of bezel cover from China because they are only a little over $2 each. I haven't gotten them yet but I thought of perhaps removing only small portions of the plastic that covers the adhesive since I don't expose my watch to water. That would make it much easier to remove and also allow it to be reusable as you could just remove a little more of the plastic to reveal more adhesive. Also, it would be nice if you could buy some cheap Chinese bezels that look like the covers since the bezel is not that hard to remove.
@roidAholic3 жыл бұрын
Is it worth putting on? I just ordered one but I don't want to damage my device if I want to take it off
@HucksWorld5 жыл бұрын
Awesome video as always my friend awesome
@TheJabberTech5 жыл бұрын
Appreciate it dude
@quecksilber457 Жыл бұрын
I went for the silver/metal look with black numbers. Looks very close to a Rolex Submariner if you put the right watch face on it. There i went for the blue version. Silver and blue just kills it.
@miladmeah17924 жыл бұрын
Will this not damage the bezel in any way? And I also noticed with the ringke bezel fitted on there's slight play movement in the physical bezel, is that normal?
@TheJabberTech4 жыл бұрын
Watch the video, I show what the bezel looks like after removal. The OEM bezel has slight movement to begin with, at least on mine
@chrisbreezy-ryanbarbosa43202 жыл бұрын
Ringke should have made a little indentation on the bottom in case you want to remove it, it would be beneficial for them also, so they can sell more. Failure in design.
@billcromwellbc4 жыл бұрын
Where can I find some replacement adhesive tape for the bezel
@TheJabberTech4 жыл бұрын
Probably local hardware store
@mikeymike9755 жыл бұрын
Looks great! Thanks for posting
@mikeKidLazy4 ай бұрын
Off-topic, but does anyone know the name of this watch face by any chance?
@DeneF3 жыл бұрын
Thanks for the video. My kit arrives tomorrow. I have a silver one. Apologies but I don't like the yellow. Each to their own though eh? Many thanks.
@AliAhmed-ul6nr3 жыл бұрын
Where did you get that watch face from? Can you tell me the name of it. Thanks in advance.
@TheJabberTech3 жыл бұрын
Check video description
@ellem91543 жыл бұрын
Where do you purchase the adhesive strip only?
@TheJabberTech3 жыл бұрын
Check home depot or your local craft store
@hemkeshraina61244 жыл бұрын
can you tell me what adhesive should we use to attach the old bezel ring
@TheJabberTech4 жыл бұрын
try double sided tape
@hemkeshraina61244 жыл бұрын
@@TheJabberTech i used it but it came off again...then i used fevibond( rubber based adhesive ) it doesn't fall now, but i am little worried about the residues it will leave
@smileandlaughs3 жыл бұрын
Thanks this helped a lot.
@TheHUhelps2 жыл бұрын
Thank you!
@EricGonzo10235 жыл бұрын
Great info.....what I would really like to know is what watch face is that?
@EricGonzo10235 жыл бұрын
I clicked the link in your description however that takes me to the Solo Panamera watch face which is not the watch face in the bezel removal video
@TheJabberTech5 жыл бұрын
Good catch! I fixed the link. It's called VT slash
@EricGonzo10235 жыл бұрын
Jabber Tech many thanks!!!!
@TheMinmocas2 жыл бұрын
Great idea. Thanks
@pearmeowww3 жыл бұрын
Thx for this video is so amazing for me
@TheJabberTech3 жыл бұрын
Awesome 👍🏻
@marvinmartian4991 Жыл бұрын
Both are nice 👌
@kpkp10779 ай бұрын
Can u do this to the samsung watch 6
@TheJabberTech9 ай бұрын
Yes
@andrea11619782 жыл бұрын
How can I do to re-apply the bezel?Is there any kit?
@TheJabberTech2 жыл бұрын
Get some double sided tape
@sirhborn5 жыл бұрын
I like the yellow to might get one when i get tired of the silver one?
@TheJabberTech5 жыл бұрын
I like the yellow too!
@hohoangha45634 жыл бұрын
Hi jaber tech, your video look really great, that useful, can you told me what is your watch face name? thank you!
@TheJabberTech4 жыл бұрын
Appreciate it ‼️ check video description
@hohoangha45634 жыл бұрын
@@TheJabberTech Thank you
@YiG_switch5 жыл бұрын
Nice choice, I have the black/yellow steel on mine 😎👍
@TheJabberTech5 жыл бұрын
Thanks!! 😀
@nandanpanda2463 жыл бұрын
What's the watch face 👀 can i get the link plzz
@TheJabberTech3 жыл бұрын
Check video description 👍
@nandanpanda2463 жыл бұрын
@@TheJabberTech It says Page not found when the link is opened...
@TheJabberTech3 жыл бұрын
Guess it's no longer available. Sorry bud
@myfakeguuglaccount83075 жыл бұрын
I wonder if a little hair dryer heat might make that easier. I have a bezel with the Ringke that's never coming off, since I scratched the stock bezel. If I swap it out, I got spare stock bezels to swap out.
@TheJabberTech5 жыл бұрын
A little heat will def help soften the adhesive strip but not really necessary
@thizzlemarey37214 жыл бұрын
Shoot I peeled my right off and the adhesive still was reusable and hey all the bezels are dope. Plus hit up the dollar store for some adhesive and dont toss the old ones out. Well not unless u bent them, then bye bye. But if u messed up the placement and need to align it over. It's most definitely possible. And try the inner bezel shit looks dope with that as well.
@vladimirzahorodny17524 жыл бұрын
What kind of adhesive should I buy to reuse the ring?
@TheJabberTech4 жыл бұрын
Double sided tape
@Manny-1175 жыл бұрын
Dude what is that watch face called?? I want it bad please respond
@TheJabberTech5 жыл бұрын
Check my video description
@JackieArdoline5 жыл бұрын
Nice!
@aniza_c4 жыл бұрын
Mine doesn't come off :(
@alansmith724 жыл бұрын
If you take the box apart, there's a new sticker under where the bezel sat in the box.
@TheJabberTech4 жыл бұрын
There weren't any extra stickers in my units ..maybe they include them now
@kingRBGaming3 жыл бұрын
Watch name please? The link does not work anymore
@Pro1er3 жыл бұрын
The name is right there in the title, Samsung Galaxy Watch.
@bbwheels53875 жыл бұрын
How will I know of the 46mm watch will fit
@bbwheels53875 жыл бұрын
*if
@TheJabberTech5 жыл бұрын
You buy the one for the 46mm :)
@astcomjakecw3 жыл бұрын
Floss does not work on most bezels. The butyl adhesive strips these days are so thin that the floss cant get under the bezel. You will need a heat gun unless you can find older model bezels. Not even spudgers can get under it without heat.
@TheJabberTech3 жыл бұрын
Worked for me as shown in the video 👀
@6maxwell993 жыл бұрын
@@TheJabberTech Didn't work for me now mine is on for life. And I already traded this in for the watch 4. Now what?
@teotim75 жыл бұрын
I have silver and for me that is beautiful, but on that two, first not yellow!
@ChocsTech5 жыл бұрын
Thanks
@magwan72655 жыл бұрын
That's what I looking for. Big Thanks man. 😊
@TheJabberTech5 жыл бұрын
Awesome 👍
@sirhborn5 жыл бұрын
Interesting🤔
@nicksajs5 жыл бұрын
Plz make a vid on how to reuse the bezel?
@TheJabberTech5 жыл бұрын
Get some double sided tape and put it back on
@nicksajs5 жыл бұрын
@@TheJabberTech sure but wouldn't double side tape make it thicker?
@TheJabberTech5 жыл бұрын
Yes, that's why it's a one time use only but you can adhere it again if u really want to, just won't be as nice
@kboy198319835 жыл бұрын
Mine came with a spare adhesive ring, assuming it's there if you want to reuse.
@umarazhar183 жыл бұрын
Watch face no longer available 😔
@I33Mhz2 жыл бұрын
Думал что его пальцы быстрее разъеденятся с суставами, чем накладка на безель...
@trentdingle57693 жыл бұрын
Watch face ?
@TheJabberTech3 жыл бұрын
Always check video description for all your answers 😜
@ziineziine35042 жыл бұрын
Water finish
@TheJabberTech2 жыл бұрын
Or alcohol
@mharmaansheikh63885 жыл бұрын
The actual bezel has ruined up
@travelstories25294 жыл бұрын
change the straps.
@TheJabberTech4 жыл бұрын
I always do bruh
@africanhistory2 жыл бұрын
def do not like that yellow
@JordanJank4 жыл бұрын
Neither putting the big tachymeter right there is stupid....