Looks great. btw I was thinking that it may be neat if you made a endo skeleton to put the spring trap suit on. if you make it adjustable you may be able to pose it in the corner of the room and if it doesn't work out you'll have a pretty neat coat rack i suppose
@atig512 жыл бұрын
Thats just Springtrap inevitably living up to its name, a spring trap. I prefer not having FNAF in real life, thank you very much.
@pikkeneater2 жыл бұрын
COAT RACK
@MeowMeowScratchy2 жыл бұрын
Coat rack lol
@samuellangford61262 жыл бұрын
thats a good idea!
@imnobody3632 жыл бұрын
@@cide5 he does are you dumb?
@Mike14264 Жыл бұрын
What a beauty! I love how you made them very bendy, I feel like that's one of the best aspects of the Puppet's design that usually gets overlooked by some folks, usually SFM animators.
@gaming2ebbrell1362 жыл бұрын
Awesome build, I don't think I'll make the full thing, but I printed the mask.
@KyrenShat2 жыл бұрын
its great! my only recommendation is to add multiple coats of each colour paint, it takes longer but in the end it makes it much nicer when there arent any spots where the paint is thinner. but who knows you might have a reason why you dont
@Mike14264 Жыл бұрын
Maybe it's done on purpose to make the mask feel old and worn out?
@paridem57542 жыл бұрын
I can’t believe this guy only has 3800 subs. This is quality content keep up the good work! 👍
@midnight_studios54242 жыл бұрын
marionette looks amazing, and btw your creations are awesome!! keep up the amazing work!
@sendboiii28282 жыл бұрын
The Marionette is very creepy, but this is way more creepy! Keep up the hard work!
@Muffin_Sammy2 жыл бұрын
Perfect! Other than the iconic, wavy, fingers-
@senty122 жыл бұрын
2:55 That spider really just said, "hi"
@paytonsullivan37232 жыл бұрын
you are way too underated this is peak content
@jappa36312 жыл бұрын
Subbed before this channel blows up
@fnafiscool80032 жыл бұрын
i 3d printed this had to make it a bit smaller but how to build the arms and legs Edit:ok I’m dumb I didn’t listen properly for the arms and legs can I just have the old model for the arms and legs please?
@moopshloop93692 жыл бұрын
THIS IS SO COOL keep doing what ur doing
@ch4rliegaming Жыл бұрын
looks amazing
@gerardrejano2 жыл бұрын
the puppet was one of my favourite fnaf characters and I like this
@BL0XYST1NG3R2 жыл бұрын
Great! Just one rule. *don’t forget to wind that music box.*
@awesomecatgaming70602 жыл бұрын
Cool! At Least I Know What My Next Nightmare Is!!
@hubbada63732 жыл бұрын
How was your experience using the rotary tool on the print? Im thinking of getting one as well to sand small prints and fixing small details but im not sure if it will melt the plastic easily
@JackTim2 жыл бұрын
I recommend using it on lower speeds and moving it around a lot. This stops it from melting the print. Also when in comes to small and detailed parts I wouldn’t recommend it. It work’s better for large surfaces. Well at least from my small usage of it
@hubbada63732 жыл бұрын
@@JackTim All right, thanks for the tip man, the puppet looks great btw
@reedling1232 жыл бұрын
I felt ashamed when I realized I was not subscribed 😔 but now I am 😎👍
@FuntimeDread2 жыл бұрын
Your Animatronics look so realistic! I hope that you do all the other "smaller" Animatronics and maybe even Vanny's Mask from The Curse of Dreadbear DLC :)
@Karaticat2 жыл бұрын
mario hit the gym recently he buff
@farisribbit17069 ай бұрын
Bro made a bdsm puppet, nah I'm just messin with ya, I opted to paint my mask by hand and make the mask using dry clay. I also bought some velvet fabric from the store to make the body and appendages. Also those weird things on the arms and legs are ribbons, you could've just bought a roll and cut some out and either sewed them or hot glued them
@lolstopforget67522 жыл бұрын
Looks awesome, Why don't you make a DIY balloon boy? I think it would look great
@bagoratajczak77402 жыл бұрын
This was awesome! Can you make a Minireena next?
@CharLovesVox2 жыл бұрын
Wow I want one so bad! You are so talented :0
@DarknightZ0Z2 жыл бұрын
what paint do you use?
@JackTim2 жыл бұрын
just a generic acrylic paint
@DarknightZ0Z2 жыл бұрын
@@JackTim thnx
@lilasmith30052 жыл бұрын
dude how. this is amazing!!
@studioleetv51002 жыл бұрын
Wow that is amazing. Way to go superstar!
@MC_BONNIE2 жыл бұрын
How do you only have 2k subs this content is amazing!
@Kenokimi022 жыл бұрын
It looks awesome! Your FNAF 3D prints are always beautiful and creative. I have an idea for you, I would love to see an Ennard mask 3D printed! Ennard has a very complicated wires all over his body which is why I think just the mask would look great! It would also be neat if it were able to open from the middle and lower jaws.
@Some_kid737372 жыл бұрын
Your always the goat with this
@dj_hypno24602 жыл бұрын
Nice. But what about the fingers?
@damianmolina25242 жыл бұрын
you should put a layer of resin or clear polish to give it a glosy look
@xspiral-w6w2 жыл бұрын
cool! just remember, keep her music box wound up!
@Ooopy4723epikgamergod2 жыл бұрын
this is freakishly good are u henry?
@thepuppet83292 жыл бұрын
I Like it!✨
@SamXlk2 жыл бұрын
What type of coloring material/paint did you use?
@JackTim2 жыл бұрын
nothing special, just some generic acrylic paints
@deadpool58432 жыл бұрын
soooo cool that looks sooo hard
@yummy_apple79242 жыл бұрын
I have a good idea you should make a freddle that would be so cool
@cheeseballs69772 жыл бұрын
WOAH THIS IS COOL
@emmamiller5157 Жыл бұрын
What program did you use to design the models? thankyou big fan of your work!
@JackTim Жыл бұрын
I use blender
@dracodeez69420 Жыл бұрын
You can tell that he gets nightmates at night sometimes cuz of all his 3d printed animatronics
@youareanidiot89802 жыл бұрын
Looks good to make a Life size fnaf rp in your house
@Spacetrap2 жыл бұрын
Can im have a question? How many it cost to make a suit like springtrap one you did in last vids?
@JackTim2 жыл бұрын
Around $300
@Spacetrap2 жыл бұрын
@@JackTim ok thanks
@FUNGUSMAN9202 жыл бұрын
Maybe you should make the Freddles next, I think it would be cool.
@jigtenwangchuck65882 жыл бұрын
I love your videos 😁
@DeadDuck_12 жыл бұрын
i have that exact same techdeck skateboard thats on your desk
@nathanhall-r5k2 жыл бұрын
I suggest you do a Lefty suit
@bronz32 жыл бұрын
Yo, you should do the fredlings from fnaf 4
@mohamedrayan40882 жыл бұрын
Hey is that 3D printed or did you bought it in a store bc I want to make the puppet so tell me pls
@lunaanims81712 жыл бұрын
do you 3d print pre-made models or do you model them yourself?
@JackTim2 жыл бұрын
I make all of my models
@th3m4gIcM4n2 жыл бұрын
what 3D Printer do you use for these? I would love to try and make some of my own!
@JackTim2 жыл бұрын
I use the CR-10
@dukcaa2 жыл бұрын
@@JackTim hi
@JackTim2 жыл бұрын
Hi
@dukcaa2 жыл бұрын
@@JackTim have you seen my channel before by any chance?
@spikeup7952 жыл бұрын
Looks good
@GoodGamesanim Жыл бұрын
Looks great but the fingers on the puppet were forgotten
@LegacyCyborgMike2 жыл бұрын
would be really cool if I could buy this
@JessJess3472 жыл бұрын
This is amazing! could you do Toy Chica id do it myself but I don't know how to get the model. Thanks for putting the mask up on thingiverse btw I have printed it and its nice.
@JessJess3472 жыл бұрын
I plan on attempting to Print a full size toy chica standing at 6'4 but I'm not too sure how to do this obviously it would be great if you could do it but I understand that is too much to ask for any tips on how I can do this though? software general tips etc
@keishaannicapriego62342 жыл бұрын
Tooooo that is ganna bring life
@EduardoDev877 Жыл бұрын
Cool video
@rippepot2 жыл бұрын
it's super cool but you forgot the hands!
@JackTim2 жыл бұрын
I couldn’t find a way to make them look good
@evanonearth10602 жыл бұрын
you should make life size lefty
@Saberaxolotl2 жыл бұрын
Yes and make it so you can put the puppet inside of it
@the_smiler9532 жыл бұрын
The purple mask behind the slaughter D:
@scpguy3xlul7462 жыл бұрын
If you put the eyes, cheeks a bit lower and make the eyes a bit bigger then it will look a bit more realistic
@MikeyPocketMon2 жыл бұрын
oh HELL Nah, Imagine waking up with all these around you
@fazeditor81032 жыл бұрын
Can you make Funtime Freddy? Also you need more support because your art is Really good.
@AlexanderDoesntDraw Жыл бұрын
I wanna do this but I don't a 3D printer
@venomfan20202 жыл бұрын
You forgot the Marionnette's fingers
@snakefurty56192 жыл бұрын
!!nice video!!
@The_Frog_Judge2 жыл бұрын
What is this fabric
@jamesmoriarty81022 жыл бұрын
I like how he has chica’s cupcake as a trashcan
@Literally8532 жыл бұрын
yay new punching bag
@DylanBazinga2 жыл бұрын
What 3d printer do you use?
@JackTim2 жыл бұрын
CR-10
@huggywuggy62532 жыл бұрын
It looks great but you forgot the hands
@L70PRY2 жыл бұрын
How that’s inpossible how is it so good
@shmunk8252 жыл бұрын
Yooo, that’s sick! I don’t know what to save up for, a life-size Freddy Fazbear foam statue, or a 3D printer..?
@dragnphlazer482 жыл бұрын
3d printer, I suggest the Longer LK5 Pro 3D Printer. It is cheap and large, and worth it.
@shmunk8252 жыл бұрын
@@dragnphlazer48 I mean, i have enough. I’m completely new to 3D printing and doesn’t know shit about how this works, should i buy it?
@Crinlask2 жыл бұрын
@Stinkyboi L Get the 3D printer still. Learn from KZbin tutorials and such. Then you can make a much bigger Freddy! :D
@shmunk8252 жыл бұрын
@@Crinlask Alright, i will. Thank you!
@dragnphlazer482 жыл бұрын
@@shmunk825 yes
@syweb22 жыл бұрын
Cool build, but why doesn't it have fingers?
@JackTim2 жыл бұрын
Couldn’t find a way for them to look good
@jamesmoriarty81022 жыл бұрын
I actually like Merionethtte and it also looks realistic
@fortnite_gg3052 жыл бұрын
Hey maybe should 3-D print bonbon from FNAF sister location or maybe a mini Rena
@SomeDegeneratedKid2 жыл бұрын
you should make nightmare bb next
@pikkeneater2 жыл бұрын
*starts singing notion*
@main.YaD.sa.2 жыл бұрын
imagine you see that in the middle of the night
@Pumpk1nguts2 жыл бұрын
THE HANDS DUDE THE HANDS
@gamingfilms37002 жыл бұрын
Looks good, but just wanted to tell you that you forgot the fingers
@ALXCHTZ Жыл бұрын
So cool
@becool15802 жыл бұрын
Man you blew up lol last time you were at 200 subs
@clplayzxz101012 жыл бұрын
Is this something you do on a daily basis
@leaf79272 жыл бұрын
Pls tell me how i need to do it if i want to print it at 40%?
@leaf79272 жыл бұрын
P. S i love your channale
@JackTim2 жыл бұрын
Everything should be the same, you’ll just have to use a thinner wire for the spine
@leaf79272 жыл бұрын
@@JackTim ty so mutch i did the bon and plush trap i made some tik toks and i mentioned you
@Azxght2 жыл бұрын
Idea:Make a Freddy mask like in fnaf 2
@Bonnie_TheBunnygaming6 ай бұрын
I need a music box ASAP
@the_purple_hat Жыл бұрын
Please make another costume, I wanna see withered foxy or toy bonnie!
@RetroSamson2 жыл бұрын
Could you possibly make a Robert Pattinson Batman mask. I have a Ender 3 so it’s not big so maybe a in a few pieces? God bless.
@bruhmincraft22112 жыл бұрын
Yes very good
@ashleighreid25162 жыл бұрын
Could you make a replica of Lionel the lion from circus playhouse next from the animatronic band
@35Cyt2 жыл бұрын
Stuff the puppet into the springtrap suit
@damer4life528 Жыл бұрын
Lefty but Springtrap???
@DapperDomDX2 жыл бұрын
awesome man, cool shit
@ZonerAnimates2 жыл бұрын
hey dude could you make a 3d printed Funtime Freddy suit? so bon bon could connect to the hand
@dianarodriguez86752 жыл бұрын
Hey hey guy you forgot to make the fingers for the puppet The puppet of three fingers you forgot about that
@nexis18412 жыл бұрын
Letsssss gooo only 3 months left and we will talk again
@Cncinderella302 жыл бұрын
Sorry um I'm not the one to complain but where are the fingers besides that its pretty good
@the_heartbreakers2 жыл бұрын
Can you sort of make foxy?
@bettyloumashek2 жыл бұрын
You could just stitch on some hands for the fnaf 2 puppet you made