HERE Are the Power RESULTS of MY Brazilian Amplifiers!

[@ronnydisalvo80]

Amazing when you watch jacobs video from when he had 1sub..4th order to where he is today..youtube grind has paid off

[@MrDopey32]

Mistakes or not, you do a great job Jacob! Only thing I'd say is slow down just a bit when explaining, you know some won't catch everything. Over all, great job!

[@liljaybud]

Your neighbors must love you.

[@JacobViral2]

Never play at the house unless burps only lol

[@WifeBTR123]

I don't think I have ever seen someone write numbers from the bottom up. That definitely caught my eye. I enjoyed the video.

[@JacobViral2]

Thanks for watching!

[@bkh5746]

What id like to see is someone take a full range vs the half bridge at say 25 hz and 40 hz putting out the same power not clipping and see which one is louder on the low notes.maybe its just me but the taramps i had just dont compare to my shark 4500 down low.it just sounded like something was missing.

[@casey360360]

Stetsom is the OG Brazilian full bridge, they’re all I run. Good stuff man

[@JacobViral2]

Thanks it works for me 👍

[@moneycat3789]

Jacob viral you can use the am-1 and the clamp meter to do it

[@JacobViral2]

Thanks good point just don’t wanna spend the money on an amm1.

[@RyanBassForLife]

I need to try measuring my power on my 2 Soundqubed amplifiers⚡

[@RawbasicInc]

What model kenwood are you using

[@JacobViral2]

Recall the 305 excelon amzn.to/3qPNF81

[@holeshotinspectionllc2412]

Solid 🤙

[@kswis]

The amm1 is expensive. It's nice to have I use mine quite a bit but damn it ain't cheap

[@JacobViral2]

I know I thought about getting one but I wouldn’t use it enough and the way I clamp is close.

[@11bigjames11]

That’s some good calculation I do the same thing for my car audio

[@JacobViral2]

It helps see real world results 👍 thanks for watching and subscribing

[@thesaltyburban5557]

Jacob viral love all the vids hope to get a demo some day!! Have you ever thought about running any of the salt amps????

[@steveharley2021]

Big bucks $$$

[@JacobViral2]

Thanks man! I wouldn’t ever go sundown as the price per watt is to high and I like to be different and get loud with that.

[@srtjdm1458]

F**k sundown.!! All There chit is over-rated

[@bigggrab6729]

@@JacobViral2 how do you set those amps properly? I have 1 on 3 dual 2 zvx’s and I can’t even cut the amp gain up a quarter waywithout it clipping and the amp going into protect. I have them at 1.33. Any ideas why? Thanks

[@JacobViral2]

@@bigggrab6729 your RCA Voltage from your head unit controls your gain setting. I have a 2.5v head unit and it doesn’t go past 1/3

[@candacenelson7994]

You are awesome I bout 2 of these ,sad but only one yr warranty.???????

[@JacobViral2]

Depends who you buy from but most amps are only 1-3 year

[@mistanotu8791]

Wheres your remote source for the beasts from and are they daisy chained

[@JacobViral2]

From the stereo head unit and I’m using a RCA Distribution Block xplicitaudio.com/product-category/installation/rcas/rca-distribution-block/?ref=3229.

[@Van1018s]

You made a few mistakes. Lol. I’ll still watch every video. Love what you do for the entire car audio community. Regular guy doing what you love. Exactly how life should be. 👍🏼

[@srtjdm1458]

What mistakes did he make?? MR Smart guy.

[@Van1018s]

@@srtjdm1458 what did I say that made you decide to be a dick? Just in some of the things he said, which he corrected through editing. I was really just being sarcastic, which from my comment being positive I thought was obvious. Actually he taught me something. I own termlab, if you even know what that is, and I used his method today to clamp one of my amps, and it was very accurate. I think very highly of Jacob viral. I’ve met him at several shows. Talked to him many times and he’s the nicest guy you’ll ever meet. I have a feeling I wouldn’t have that same opinion of you.

[@Longpipejang]

@@Van1018s I like how you wrote all that bs and still didn't answer the question. You try to act like the better guy in the conversation yet you think it's funny to criticize someone inside a compliment. I'm a man of many hobbies and the audio comment is hands down the most toxic. You guys always feel the need to point out every little detail you FEEL is wrong. Just shut up and say great vid and keep it pushing

[@Van1018s]

I’ll just say what I already said. Jacob does more for the car audio community than anyone I know of. He has more passion for it than anyone I know of. He’s also the nicest guy you’ll ever meet. I didn’t realize the sentence “you made a few mistakes” was such a big deal. I’ve been doing car audio since before Jacob was born, and I’ve learned quite a bit from him, and thoroughly enjoyed this channel since finding it. So Jacob if I offended you I apologize. If I offended anyone else I really don’t care.

[@kevinl3892]

Very Efficient system great job

[@operater43]

Ok never mind, I caught it.😄😁😎 thanks man!

[@JacobViral2]

Glad to help

[@biscostuntz5930]

Hey Jacob , I am starting my first build with 2 avatar svl’s 18s , any tips on building a box or how to start everything , it’s going into a Jeep yj.

[@fredsmith1672]

Yeah. Start researching enclosure building. Figure out what type of enclosure you want to suit your needs. Id start with your electrical system needs first. But there are tons of great, informatiinal vids out there. Just gotta sift through the garbage ones.

[@JacobViral2]

Nice goodluck with your build! What Fred said but also try to layout everything on paper and in your head before all the decisions so you safe time and money. Make sure you double check your measurements and tune properly. Expect to have room for the electrical and amp rack stuff.

[@drvictoria07]

Do these amplifiers have 0 gauge inputs for power and ground?

[@JacobViral2]

Yes

[@drvictoria07]

@@JacobViral2 thanks. And what gauge are the speaker inputs?

[@JacobViral2]

@@drvictoria07 your welcome and 4-6 gauge looks like as it allows my 8 gauge in with ease.

[@bigmikediesell235]

are you going to switch back to the crescendo?

[@JacobViral2]

I’ll have a video on that in afew days.

[@bigmikediesell235]

Awesome

[@srtjdm1458]

@@JacobViral2 i honestly wouldn’t switch back to the Korean Board. Tho’s new Stetsom Amplifiers are monsters.!!!

[@RomaVilla]

@@srtjdm1458 would you recommend them over taramps. Like this Vulcan 3k over the MD 3k taramps? Bravo over smart amps from taramps

[@martincamberos318]

man how u calculate tha box? i still dont get it ive tried in several programs but they give a peak signal and short bandwidth. how u do it?

[@JacobViral2]

I just build the shell and used a box calculator from 12volt. No design software personally.

[@maxwest1368]

What's up Jacob! what's the RMS on your 18 inch woofers?

[@JacobViral2]

Hey man their 4” voice coil rated at 2,000 Watts rms 👍

[@operater43]

Hey jacob, what setting is the clamp meter set on. Keep doing great work brother!!

[@JacobViral2]

Looks like you got it? Thanks for watching!

[@DjR3aper]

For those who couldn't tell what he had the clamp set to, it was to 600 A squigly line

[@DjR3aper]

9:55 can you just stick the leads into speaker terminal (on amp set to ohms) and see what it goes up to?

[@TheAceTroubleshooter]

There would be no reactive load then :(

[@Hayawasa]

How is the new h/u? If it holds up to all that bass let me know, i need a good one but not sure wich one to get, i want one with a dsp built in but, at least would like one that can handle vibration

[@JacobViral2]

Haven't had much testing with it, but no problems so far.

[@bkh5746]

I got kenwood x304 its nice deck.120$

[@pvgreen621]

What do you think of soundigital

[@JacobViral2]

Great power horse amps and seem reliable from all the demos I heard with but don’t run below min ohm. Good option for sure

[@Redchevy1977]

Have you used a stepsom 3000 1 ohm black edition if so wanted to know how to set levels

[@JacobViral2]

Only this 8000 I’ve used sorry but they all work the same just additional power ranges.

[@bassismygod9859]

Jacob does tht headunit carryin 3 pre-out?

[@JacobViral2]

Yes

[@torienelson3022]

Curious on what ohm are you running the amps at?? Thinking about buying one if it can run at .67ohms

[@JacobViral2]

1 ohm starting and usually rise to 1.7-2.5 ohm. Don’t wire below 1 ohm or can blow if you ever see below .9

[@bigggrab6729]

@jacob viral how do you set those amps properly?

[@JacobViral2]

I have a playlist setting the amp settings: kzbin.info/aero/PLkYp1Fj-99b0pFNxaohIxCaer8VxQVZ2j I also got more to do so stay tuned

[@bigggrab6729]

I have this same amp I brought just trying it out and I have it on 3 zvx’s wired to 1.33 and I can’t turn the amp past quarter way. I cut it up then it goes into protect. 🤦🏽‍♂️

[@JacobViral2]

@@bigggrab6729 What’s your rca preout voltage? Usually over 2-2.5 is too high. How’s your electrical? Not having enough to support can be a problem if dropping into the low 12s. Gain/Bass level isn’t a volume knob, depending on your rca voltage will lead to where your gain should be. I have never had mine protect so that’s weird you are sorry.

[@bigggrab6729]

@@JacobViral2 had to get a lc1. Thanks

[@abunch421]

I’m running a Vulcan 3000 at 1 ohm with 2 AB elite 15’s with a jvc hu that has 5v pre outs and haven’t had any problems for over 2 1/2 months now. I usually sit around 13.8V at full tilt with the big 3, an optima yellow top and a stock alternator still in a ‘04 Jeep Grand Cherokee WJ

[@srtjdm1458]

Bro i honestly thought my handwriting was bad.!! LMAO.!! 🤣😭😭

[@JacobViral2]

Ye mine is really bad lol

[@samle8260]

Ya.. how can u write like that,u start bottum up with your numbers.. wtf haha. Looks crazy.. Are stetsom worth buying??

[@rts100x5]

why the small gauge wire to the amps ?

[@JacobViral2]

Which ones are small?

[@rts100x5]

@@JacobViral2 my bad its the speaker wire / thats what i get for watchin videos at 5am

[@JacobViral2]

@@rts100x5 no worries it’s 8 gauge and for speakers so no need to be bigger. 👍

[@jvsyoutube3298]

...not that it has something with the audio to do, but you write things from bottom to top, exactly opposite of what we do in sweden regularly..

[@TrendyBromando]

Also your kenwood deck shouldnt clip at volume 30 ive ran every type of kenwood for years they all play up to vol 35 on a 0db track

[@JacobViral2]

I tune my system to clip at 30, I prefer to not tune at max u clipped volume so always have afew less turns.

[@TrendyBromando]

@@JacobViral2 i guess to each his own you definitely know how to make some loud ass builds that is without a doubt

[@marcusgraf1443]

Do you have the amps still or did you sell them

[@JacobViral2]

The vulcan series are gone but I have 1 bravo bass 8000. Feel free to message me on facebook/instagram Jacob Viral.

[@bassmanwell1255]

Shouldn't you add the two resistances and not multiply?

[@JacobViral2]

Not how the VA Works, voltage x amps

[@cerealkillerdave6881]

What 6.5 mid range are those?

[@JacobViral2]

Crescendo pwx

[@mikessplboxes7497]

Whats the final impedance on each amp

[@JacobViral2]

1 ohm per amp starting, final shown after rise in test

[@mikessplboxes7497]

@@JacobViral2 thinking of getting one. Im between smart 5k or vulcan 8k. Which you think will give me more clamped power real life

[@JacobViral2]

@@mikessplboxes7497 kind of a no brained tbh 5k vs. 8k, even if say the smart was 10-20% more efficient still the 8k wins.

[@mikessplboxes7497]

@@JacobViral2 10-4 all I needed to read. I appreciate your response, everyday I wait and watch your uploads

[@JacobViral2]

your welcome and thanks for watching :)

[@isiacseabrooks30]

Is that the sequoia

[@JacobViral2]

Ford Explorer 06

[@Dookiefisher]

So are these better than taramps

[@JacobViral2]

Depends on brand preference, both options are fair/same. I always had great results from these

[@Dookiefisher]

@JacobViral2 need8ng to push 2-10 ct messo's, I have a taramp 5k but I don't know if that's too much or be good

[@JacobViral2]

@@Dookiefisher Well those are 1500rms, x2 =3000rms plus rise/voltage, 5k is perfect great combo if 1 ohm

[@Dookiefisher]

@JacobViral2 so it shouldn't over power those and mess them up as long as I set the amp right, I know those messo can take some power

[@marcusgraf1443]

How much did you pay for the 8k and does it only do 5k

[@JacobViral2]

Little over $500 here amzn.to/3FttUVe and it does over 8k watts at 1 ohm, my clamp results was near 2 ohm so good results.

[@marcusgraf1443]

@@JacobViral2 I was wondering because eBay has the same amp for 298 plus tax

[@JacobViral2]

@@marcusgraf1443 I wouldn’t trust anyone not a Stetsom dealer or Brazil direct form manufacturer. I sold one of my 8ks used for $400

[@marcusgraf1443]

@@JacobViral2 so it was 5,149 watts at 2ohm

[@guysgt5003]

Doesn’t all that wood vibrate like hell

[@JacobViral2]

Yea but the amp rack wasn’t on the back wall so did great, minimal flex

[@guysgt5003]

Oh OK, thanks that makes sense. I thought that was the very back wall. Thanks.

[@ktraughb]

Your rise math makes no sense. The final load is the 2.3. Not sure why you're over complicating it.

[@oscarcorazondeleon2316]

163db 👎👎👎noooooooo😂😂🤣🤣🤣🤣😂🤣🤣🤣🤣🤣🤣😂😂🤣🤣

[@JacobViral2]

Why no? 🤔

[@oscarcorazondeleon2316]

@@JacobViral2 163 db son muy pocos los campeones que an llegado imposible con ese sistema jamás si es verdad serás uno de los grandes sino mira 👀 los registros

[@Juggernaut-fg2up]

I don't like the lack of mids and highs, that's only half of a system

[@JacobViral2]

good point thanks for watching!

[@Juggernaut-fg2up]

@@JacobViral2 thank you bro for the great content and the ability to take constructive criticism, very rare these days

[@RomaVilla]

That's not criticism, that's just bluntly disliking on his system . That's some hating shit vibes

[@Juggernaut-fg2up]

@@RomaVilla it's called reality. You're like the guys who never train legs who call themselves bodybuilders 😂

[@RomaVilla]

@@Juggernaut-fg2up and I bet your the guy trying to lift more than he should or can just to show off and bet you grunt real loud after every rep to make everyone look back at you