FileZilla FTP Server Setup [Tutorial]

[@andrews1324]

Thanks for being informative, not playing terrible music, and not telling me to subscribe for 3 minutes. Also, thank you for not being 12. More tutorials should be like this.

[@lolly460]

I have watched a lot of Filezilla tutorials. Yours is the best i have seen and most simple one and i got mine to work. Thank you!

[@johnkrajeski5628]

Excellent tutorial. I only wish I would have found it two years ago before I had to figure it all out on my own by trial and error. Again, great tutorial. Thanks.

[@TheLawnWebnut]

Great Tutorial! I spend lots of time looking thru U-tube for info on learning about web design, and to help answer problems. Lots of garbage out there but your tutorial was very well spoken, organized, easy to follow and informative. Wish you had one on the entire process from Easy PHP -> Filezilla Client -> C-panel -> Website.

[@audryckdoesgaming262]

i know this tutorial is 5 years old but it worked for me! thank you!

[@kaysam6491]

I tried to setup the filezilla your way but some how it says: *Warning: TP over TLS is not enabled, users cannot securely log in. You appear to be behind a NAT router. Please configure the passive mode settings and forward a range of ports in your router* Can you help me with that please?

[@eddyjimenez7655]

Same thing happened to me but I found out how to fix it. Open the settings and click FTP over TLS Settings and check Enable TLS over TLS support (FTPS). Then, go to Passive mode settings and check Use the following IP and type in your IP and and save it.

[@patriciat.8121]

Eddy Jimenez thanks, but it is asking me to enter a private key file.

[@JAGTutorials]

@fishraw I have written and recorded the tutorial, but need to finish editing it. The Windows 8 Consumer Preview just came out today, so i'm concentrating on that until it's done. I hope to have that up by later tonight, and I should have the FIleZilla Client tutorial finished and posted by tomorrow night. I hope this will be in time for you to use it.

[@heynewt]

Great detailed tutorial on the basic setup. I just wish you had continued the tutorial to show how to setup Filezilla on a network to actually work as a server so that someone outside your network could connect to the folders you designate. I mean, that's the whole point of Filezilla server. Just showing how to simply "install" the software, as you showed, barely touches the surface of what you need to know to get Filezilla to work as an FTP.

[@ChesterWhitlow]

Excellent tutorial, the best I've found. Thanks for being so clear and concise, and for taking the time to make it!

[@claudiofduque]

Thank you for a detailed enough and clear tutorial! Greatings from Buenos Aires

[@datboyblu3]

@JAGTutorials no problem, thanks for putting in the time!

[@twinscorpins]

after i installed the server it popped up the same box as you except instead of 127.0.0.1 it has [::1] i am want to connect it to my router so i can access if from all computers connected to my router do i need to do something different?

[@MercedesBenzS600LAMG]

The best tutorial i have saw untlll now to explain in detail and easy way to use the Server FileZilla :) thanks a lot, but i am still looking on the following how to know my address, i mean for a friend what ftp address should i give him

[@NitinRamachandran]

Excellent tutorial..!! I am totally new to the server side stuff. Very easy and helpful..! Thanks a lot.

[@georgegarcia9396]

Very nice tutorial. Explained everything clearly. Thanks

[@JAGTutorials]

@fishraw I just finished the FileZilla Client tutorial. I can't link to it here, but you can find it on the video page of my channel. Sorry it took much longer than expected.

[@softbluejazz]

'Excellent tutorial. My son and I have android tablets that we wanted to be able to transfer files to/from. This (and your client video) showed us how. Thanks!

[@pall2001]

Thank you so much for sharing, flawless, precise, very clear explanation!! worked out perfectly well:)))

[@TimCarthon]

This is great for step by step, but the problem is everything you're telling us to do has no explanation of WHY. I'm doing all of this but have NO CLUE what any of it means. It's almost like I'm following a person through a ridiculous maze but have NO IDEA where I'm going, how we're getting through the maze, or anything. Then, once I get to the command prompt and to the password part, it won't let me type anything else in. I tried twice, so now I'm stuck having done all of this and have absolutely NO CLUE what any of it means AND can't go any farther. UGH! This is SO frustrating.

[@A.nasierkhan]

Tim Carthon well said my brother..

[@BravoOnyxNewt]

password doesnt actually type its invisible

[@clintonkim5075]

7:38 I couldn't find Xtra storage....I find FTP nowhere.....I found C:\Program Files\FileZilla Server though.....What do I do?

[@SonofJesusChristHisFollower]

You should create it on your own! Anywhere on your computer.

[@cstewart60]

Great work Jag...easy to follow...good voice.

[@danescott2212]

Great, great job on that tutorial. So clear and to the point. Love it.

[@Jonjon_Daniel]

thank you very much for posting this video.. you have been a great help for first time user like me....more power

[@RonSchori]

Best tutorial I've ever watched and used!!! Keep it going man!!!

[@Iisakki3000]

I get connection refused at 13:11. I swear i did anything like you said in the video and double and triple checked everything. What could it possibly be?

[@tbrowntakeudown4861]

I get the same thing EVERY TIME. SOMEONE PLEASE HELP ME

[@dxvidsx]

I get the same can someone help and what password they talking about?

[@tbrowntakeudown4861]

David Pro Gamer I know the problem and I can help you fix it. tell me if your still having problems

[@dxvidsx]

I fixed it but how to make a static ip and port forward? when I give my IPCHICKEN to my friend they cant join dont work help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@tbrowntakeudown4861]

I will find a link of how to Make a static IP and I will tell you a tutorial of how to port forward for a virtual server

[@vegasvato55]

I am about to loose my mind trying to deal with setting up Filezilla server on windows 7. I keep getting this warning "You appear to be behind a NAT router. Please configure the passive mode settings and forward a range of ports in your router. Warning: FTP over TLS is not enabled, users cannot securely log in.". II have made certain that the firewall and UAC are both disabled, and i am not running any other type of antivirus on this machine. I have watched the few video tutorials on you-tube that i could find but not a single one of them resolves the problem any help you might offer would be greatly appreciated.

[@justinlye9946]

I am getting the same error code (on windows 10).

[@congrim]

wiki.filezilla-project.org/Network_Configuration#Passive_mode_2

[@vegasvato55]

As it turns out you have to be sure to set up the isers and groups and then in general setting you have to make one change. It nearly drove me crazy but there is a solution. I will find it for you

[@amh2762]

did you find the solution man? please share your knowledge I have the same issue

[@congrim]

Again: wiki.filezilla-project.org/Network_Configuration#Passive_mode_2 Also, you need to forward the port range you set there.

[@MohamedEzzat-lu7mw]

For everyone not able to connect, please ensure that you add the firewall rule to the windows firewall for the FTP FileZilla server.

[@cosmingurau]

Error: Could not connect to server.

[@RealistikDash]

Enable the port you selected in port folwarding i think

[@nismo5807]

Same

[@Westy1308]

how do I startup the server with my internal ip IP instead of that 127.0.0.1 crap, so my friends can connect to it with my external ip?

[@xeno._yt]

Port forward port 21 on your router and then use whatismyip.com and give your users the IP.

[@xeno._yt]

Also starting up the server at 127.0.0.1 makes it listen on all ips which should work fine

[@neoarcadezr]

mine says ..............You appear to be behind a NAT router. Please configure the passive mode settings and forward a range of ports in your router. Warning: FTP over TLS is not enabled, users cannot securely log in.

[@tonyrios9000]

neoarcadezr were you able to figure this out? i am getting the same error and i cant login

[@neoarcadezr]

tony rios yes ...basically download the all platforms filezilla not the windows only one ...;-0

[@tonyrios9000]

Thanks!

[@senichi86]

great tutorial. thanks! very easy and step by step guide.

[@angemarius]

first, WOW!!! that's great as a tutorial. next, is it possible to configure filezilla server on a computer X and try to access, I mean to use X as a server for a computer Y? coz actually I configured filezilla server on my desktop and I want to use it as a server for my laptop (they are both connected to the same network)

[@sivakumarm8033]

Very useful tutorial.. Thanks JAG.

[@Trozdol]

Are you trying to connect over the internet? If you can turn off Passive Mode in your FTP client. That solved it for me.

[@ydros69]

hi! filezilla server to (windows) working,not connect linux and amiga,any idea for fix? thx

[@Greenham1988]

JAGTutorials, do you think you could make a video on how to setup the server so that it can receive connections from clients that aren't on the same LAN connection?

[@chandanatigga2554]

Wow very nice tutorial

[@ecoowner4639]

when i type "ftp localhost" in the command prompt I get "'ftp' is not recognized as an internal or external command, operable program or batch file."

[@spkendrick]

i log in from an ftp client on my cellphone buy it doesnt show me any directories on my filezilla server. from a dos command prompt i can log in and list directories just fine... but not from a ftp client on my cellphone. this is frustrating

[@attomelez]

What if you use to configure using non-standard port instead of port 21. specially passive mode configure.

[@markomarosevic5240]

Says error could not connect.Connecting in 5 sec.Please help.

[@RealistikDash]

put localhost in the server address

[@patriciacampbell1046]

how did you get all the files on your system all files are online for me so i have nothing to to transfer over?

[@drao28]

great video. simple and lucid

[@montgal53]

Everything went fine until I connected I have an error message: Protocol error: Auth failed, closing connection. Connection to server closed. Any thoughts.

[@Ovni-J]

Hi there, I`m installing this on windows server 2003 R2. Installed fine and went through default options as per your video. however i get stuck when clicking the edit butting the settings option is all greyed out so can`t do anything more. Can you help please. thanks

[@rabbymir5934]

How do you connect to this remotely? I have my ports forwarded and I'm using the external IP address of the server as the host and I am still unable to connect

[@Mostafahassan14]

any integration with active directory for single sign-on , i want to create for our team but need to bind the AD users to be authenticated from AD not fileZilla local users

[@RamboHax]

Awesome video man, really helped me, and it was so easy!

[@WacoMuse]

Thank you for posting this tutorial, it's very well done and easy to follow.

[@dwaynethiels4382]

Please help I keep getting "550 could not get home dir"

[@margarethbrennan]

Very good explanation!! Thanks you

[@BIlalKhan-te6ii]

i am unable to load my ftp from other pc i got this error on my ftp plzz help. Warning :FTP over TSL is not enabled,user cannot securely log in. and this error occurs when i connect from other pc Failed to retrieve directory listing Man plz help me

[@tayloraustin4417]

+BIlal Khan I have same problem don't seem to see any answers

[@izec1000]

+BIlal Khan you need to configure your router to enable to have a server

[@BIlalKhan-te6ii]

i have configure my router correctly and the ftp server is working correctly online also but i ab unable to login in sv directory

[@robinder_]

+BIlal Khan well go to the settings passive settins, select min 1 max 65543 whatever is the max, and then hit ok, sometimes it will showup soetimes no, anyway then everything will work...

[@carysingram2869]

hi i have followed all the right steps but dont have command prompt on my laptop is there another program that i can use ? if not is this step necessary thanks :)

[@voiceofrummy1898]

when i try to start server ti is showing could not load TLS libraries .The program is not running

[@vegasvato55]

I would love to see a tutorial on how to set up a local wamp server that I can access from other computers on my home network. For instance I want to have a stand alone file server and web service with in my home network that my laptop and desktop can both access and exchange documents with remotely, along with a common database that I can use to manage my home office... Most of the tutorials show how to access the wamp or IIS server from out side of the local network but no one shows anything about how to access the server from other computers on the same LAN network???

[@mrchaotiq]

In the command prompt I type ftp (space) local host, then hit enter. The next thing the comes up is ftp> I type dir and it says not connected. What am I doing wrong?

[@Nsadheo]

Thanks man for the detailed video.

[@Trancelistic]

Great video. 1 very inportant question for me. How do you make the screen go fade in/out. I love it.

[@xiRiShTiMx]

when i go to the commandprompt and enter the password for my user it says password is inncorrect? and im putting in the right one?

[@xiRiShTiMx]

nevermind i got it now lol .

[@jonron3805]

The tutorial is good. There is an essential aspect missing though. You need to tell us how to access this system externally.

[@zedakalol]

+Jon Doe you need to have a live IP (Static IP)

[@gianmarcogg03]

can't access from my other pc using filezilla client on the same network: which ip must i use???

[@allanwebb7044]

I had exactly the same problem. This tutorial omits the vital information you need for this in FileZilla Server: it's in Edit > Settings > Passive Mode Settings: I checked the "Use custom port range" box, and used the range 50000 - 51000. I checked the "Use the following IP" button, and entered the IP address of the PC that FileZilla Server is running on. This is NOT 127.0.0.1- that's for the Server Admin Interface. On a Windows 10 machine, you can find your IP address via Settings > Network & Internet. Tutorial: www.groovypost.com/howto/find-windows-10-device-ip-address/ When you've found the correct IP address, you will also need it for FileZilla Client on your other machine. FileZilla server is very tricky to set up, but it does work. It's very useful for transferring files between two PCs with different versions of Windows. Networking two such machines would be a nightmare. Hope this helps.

[@Adam-np1ud]

Yeah we usually have two options we agree to the terms and get to use the application or don't agree and not use it.

[@Miiikano]

Very useful Tutorial :) Thanks!

[@datboyblu3]

are you done creating a tutorial for using the filezilla client?

[@SeymourButtz99]

Holly Hell, do you have any idea how long the world has been in dire need of something this concise compared to the disjointed layers of Mozilla doc? JAGTut: is my new hero, I wish to subscribe to your newsletter and dislike anyone you do without any need for compelling evidence. If I had a son, this is no joke, If I had a son, I'd want my sons best friend to be just like you.

[@erincarraway3851]

This is a Great step by step tutorial. What if I am getting additional messages - do you have more tutorials? Specifically 'you appear to be behind a NAT router. Please configure the passive mode settings..."

[@MediaFireHacks]

what is the difference between the client and the server

[@mamouroutraore4159]

Hello I wonder that you very well in this new year. Happy new year. I managed to solve the probleme with bootstap.ini...But now, i think i have problems with my index. i have index.php in my web site drupal and not index.html or htm. when i finished loading the files of my website on Fillezillai tired to check if all is well, i found that it is longer problem bootstrap.ini but my index after deduction. instead of displaying my homepage i have the homepage oh my hoster. Would you have anything to offer me ? Please

[@vina_colada]

as soon as i got to the cmd part, its failing me...it says something "this is alaways enabled no need to enter this command" ..sigh...

[@barbaraojur862]

Thank you. Good Introduction.

[@GenericTheDouchebag]

This functions beautifully for my FTP server, and i thank you for making this tutorial, but i have a question, is there a possibility i can remove the authentication required everytime i attempt to login to the ftp server? such as if i entered it in my web browser or through the console, i dont need to enter a user name or password, and im brought directly to the server? thanks

[@nikontori]

it says "Could not load TLS libraries. Aborting start of administration interface."

[@shrinidhiacharya7082]

ツ BreezeMC / CarbrineGames 555 ツ same problem here

[@Therealbighustle]

when i goto ftp localhost just shows ftp then when i put the user i created i get invalid command

[@DJHenryGQ]

is there a way to link multiple external drives to one account?

[@amyfandoesthings]

such a good tutorial! I am so grateful

[@SweeneyDunston]

This seems bogas as it will not allow me to do anything but "Connect to server" or "Quit"... Nothing else is clickable after downloading like is suggested here.

[@thesummary1648]

When i opened filezilla after i install it, the window :enter server to administrate- filezilla server appeared and requested Host: port:14147 password: I tried to insert my computer ip address but that does not work. the message appeared : Error, could not connect to server i am beginner guide me if you can

[@uciledesma3575]

Aguante Argentina Papá!

[@chatchatty2155]

how do i add a media boo zgema 2s to servor please

[@HLanka]

hey the cmd codes not working is not working

[@infernoacceleration]

im using coffeecup website making software to make my first website and it wants me to upload the site i made to my FTP host by entering in my ftp login. if i download the filezilla server, how do i make my website link to my domain i bought? im trying to avoid paying monthly hosting fees and get my website onto the internet. all help is appreciated. thanks.

[@nohandlesremain]

Best tutorial ever. Thanks for the help :)

[@jonathanhatton3412]

im stuck i need file zila or some thing like it for my server but I have a mac and it says that it not compatible any more what can i do I'm i fucked

[@ikhinestory708]

it says this type of file can harm my computer, shuld i still install it or not

[@RedstonePro73]

ikhine Story install it duh.

[@dudemakeithappend]

Thank you, good toturial!

[@multiblazefighter]

what do u use to recourd

[@fernanda2211]

No, you can. But it doesn't show on display. Just type it and press enter.

[@BGraves]

Thanks. Very tech savvy person here with ftp server experience but this software doesn't have an intuitive interface.

[@MitsosDA]

When using cmd, I cannot enter the password, typing characters doesn't seem to work...What is wrong?

[@wahhmann123]

same here

[@jonkonrasson2758]

wahhmann123 guys, have you tried....to type and press enter? cause CMD doesnt show the password log, even though it seems as no chgaracters have been written, they still havebeen, just write ur password "pass123" and press enter :)

[@marcocoelho]

When i use the DIR command, the files from the groups don't appear... :< i tryed everything Q.Q

[@sdHansy]

Thanks allot for the tutorials. I am getting ther shitty folder error though. My friends can connect to me and see the different directories, but they cant see whats inside of them, or something along that line

[@emieldevries20]

Now1 uses virus protectors here??? It gives me every time 2/3 virusses (or how you say/typ that) When i download!!!

[@Christofferne]

hey i have a server computer and its linux how do i connet it?

[@Rastaboi99999]

i got the same errror. been tryna figure it out all day. my ip works but not my ftp://website.com only works when i use the ip wtfffffff

[@joshmenzelmenzel14]

I watched this video and it still didn't work for anybody outside my network to connect to the server then I checked the firewall and added filezilla server to it

[@HeilmanHackatronics]

Great Video Thanks

[@editorzone100]

i created the ftp by following ur steps, but when i tried to log on from my mac using cyberduck it didn't let me in. btw i entered the " 127.0.0.1 as the server. is that right or?? P.S thank you very very much

[@frankcheng4741]

great tutorial. thanks!

[@andreacarlton4100]

I have set up my server, and still get ftp connection refused HELP!

[@sefanjogames]

i cant connect to the server. What do i have to do?