Jaguar Xf Supercharger Install part 3!!

[@balkarndilhe8962]

we’re do you find your perfomance mods because i have a 2012 xf 5.0 but i can’t find anything for performace

[@FaithStudiosVA]

Balkarn I got my performance parts from Eurotoys.com

[@Ricky50scJustalil6cylinder]

Most of my mods are all universal or custom made for example my catless downpipes, intake, intercooler pump,x pipe,upper pulley, oil catchcan. It is really hard to find parts for this cars. All u got to know is what works for this engines

[@balkarndilhe8962]

@@Ricky50scJustalil6cylinder i have the 5.0l v8 would you know by chance what would work

[@Blacknighxbox]

@@balkarndilhe8962 with a good tune,intake and some catless downpipes ut would peobably put u at around 400+hp now if u want to go farther get some headers and and and talk to ur tuner about higher octain tunes or a mix of e85 that will put u around the same power as the 470 hp xf model

[@S_ys_]

What is the bad thinks for 5.0 sc 2013+. And how the last bsi for the stock engine?

[@FaithStudiosVA]

Ricky try Jaguar dealership parts department they should have them bolts.

[@Ricky50scJustalil6cylinder]

Yeah bro i was gonna do that but i found one in my tool box that fitted exacly like the oem.

[@FaithStudiosVA]

@@Ricky50scJustalil6cylinder ok bro can’t wait till you get that car back on the road I had mine at the track the weekend in NC was running in the mid 12 she running good

[@Ricky50scJustalil6cylinder]

@@FaithStudiosVA hell yeah bro whats done to ur car? And what was ur mph in the 1/4

[@FaithStudiosVA]

@@Ricky50scJustalil6cylinder 12:25 was my time I have smaller upper pulley larger lower pulley, upgraded intercooler deleted resonators custom exhaust magna flow straight pipe mufflers, chiller killer from Kincade,VSWITCH tune from Eurotoys the car on Boostane is running on Dyno 650hp

[@FaithStudiosVA]

@@Ricky50scJustalil6cylinder mph 120

[@tra5.011]

My XF only doing 5 psi of boost no codes or light, just the supercharger coupler rattle, what would cause the low boost issue ?

[@Ricky50scJustalil6cylinder]

I think is normal when mine was stock max boost I seen was 7 psi

[@tra5.011]

Ok, read somewhere that should be around 11 psi

[@Ricky50scJustalil6cylinder]

@@tra5.011 is ur exhaust stock? Because when I got mine tuned it went from 7 psi to 15psi then I did exhaust work and it dropped to 10-11 psi and made over 600wheel. So if u have exhaust work done I think that's the reason and the xfr makes more boost stock than the regular xf too

[@tra5.011]

Only mod I have is the dual cone intakes, I do have the supercharger coupler noise but when I took the snout off the coupler spring was ok, I’m thinking probably the bearings in the snout is bad

[@Ricky50scJustalil6cylinder]

@@tra5.011 if is not tuned 5-6 psi is normal for a regular xf. Try taking out 1 of the Mas air flow sensors out of the box but leave it plugged in an go for a test drive it should make alot more boost an is going to feel way faster but put it back after ur done because the engine would run really lean and that's not good. Also try removing the supercharger belt if u can still hear the noise then is going to be ur timing chains if not then it's ur blower

[@ljduce]

What was the original reason for removing the supercharger????

[@Ricky50scJustalil6cylinder]

The original supercharger was only making 3psi boost I bough a new supercharger an had it ported

[@ljduce]

@@Ricky50scJustalil6cylinder so how much boost is the stock supercharger supposed to make.... and how did you find out it was underperforming??

[@Ricky50scJustalil6cylinder]

@@ljduce stock should be between 6-8 psi the supercharger is capable of 15-18 psi though and I have a boost gauge that's how I knew

[@ljduce]

@@Ricky50scJustalil6cylinder ok, cool... that's good to know. Thanks for the info.

[@TheOxidizer2k]

Hey, which modular pulley system is that?

[@Ricky50scJustalil6cylinder]

From griptech

[@TheOxidizer2k]

@@Ricky50scJustalil6cylinder thanks for the info. Struggling to find which one. Any part or model number?

[@Ricky50scJustalil6cylinder]

@@TheOxidizer2k theres different sizes i got the 2.3" just look it up for a cadillac cts v griptech pulley

[@TheOxidizer2k]

@@Ricky50scJustalil6cylinder oh cool. How much more boost is that good for?

[@Don1jsr]

👌👌👌

[@szavala568]

Where did you get it tuned?

[@Ricky50scJustalil6cylinder]

I got tuned by alex from alphajagtuning here is his facebook if you wanna contact him facebook.com/alex.trusov.5

[@joelalbo8311]

Where can I get the supercharged