Your feathers will not be ruffled when using the Janome Ruffler Attachment!

[@tommelot7017]

Several years ago I purchased the ruffles foot but I never used it successfully. Thank you for the tutorial. For the first time I am actually making something beautiful with it. 😊

[@pamelalangdale409]

This is by far the best and most comprehensive video of using the Ruffler foot. You explain everything and all the options in detail which makes it better for visual learners. Thank you.

[@annielaidherhairdownd7608]

I just bought this ruffler. Thanks for this video! Helps me a ton.

[@JanomeJAI]

We are so happy to hear this!!

[@lindastrelow8877]

This helped me so much. Thank you. I had a hard time seeing how you were threading the foot at first because of the white fabric on the white table. But the colored fabric made it clear for me. Thank you.

[@brendaeves3236]

Thank you for this most informative video! I’ve learned so much how to use my ruffler.

[@dreamanewsome8779]

Thank You for the video. I’m making my great granddaughter which is 18 months a apron to play in her little kitchen. The ruffles will be amazing when I get it finish. Your tutorial was amazing. Please keep doing the videos. Learned a great deal!

[@JanomeJAI]

Thank you for the comment Dreama, and the apron sounds adorable! Happy Sewing!

[@koinijikoimizu]

1. this was INCREDIBLY helpful as I was planning to make a petticoat and this si going to make it insanely easier to do. 2. This tutorial was wonderfully clear, concise and informative and helped me trouble shoot why my new ruffler foot was behaving oddly. 3. Your hairstyle in this vid is glorious. Just gotta throw that out there.

[@conqueringmountscrapmorewi2509]

Such a great tip! Thanks for sharing!

[@janometracy9053]

Thank you for commenting - we hope this inspires you to try out this foot soon!

[@jimtripp8150]

What a fantastic and thorough description and breakdown of the ruffler attachment. I purchased one the day I attended your zippered bag and ruler work class at And Sew She Did in Douglas, GA. We greatly enjoyed the time with you and learned so much. I always learn when I watch your KZbin videos. Hope you have a wonderful Holiday Season!

[@cyndic658]

I’m so excited. I’ve had this ruffled for the longest time, but had no idea how to use it. Thank you for such an informative video.

[@bodiljensen4886]

Just watched your video here and I'm so excited. Thank you very much for a really good review of what the Ruffler can do and how it is built. Your video really helps me in the use of my new ruffler. Thank you very much

[@imsewjamaican]

I just purchased this foot last month and wanted more depth in pleats thank u so much great video! 💕

[@janometracy9053]

Great to hear - this foot can look intimidating, we're happy this video helps you use your accessory. Happy Sewing!

[@knitntea1672]

Wonderful video! Good job of explaining and demonstrating techniques. Thank so much!

[@Weiskat53]

Hi Alba, I want to thank you for such complete an thorough instructions regarding the RF foot. I made my own clothes way back in the early 70s. I have forgotten how to use it. I am now confident in practicing making ruffles once again. Thank you, you are appreciated.

[@JanomeJAI]

Thank you and we're glad you gained confidence from our video! Happy Sewing!

[@doreenlesniak9108]

Thank you sew much for teaching this. I have had a ruffled for years and never knew I could use it sew many different ways.

[@louisianalady7105]

Wow! What a great educational tutorial! I am a "visual and hands" on learner. Seeing the function of something is how I learn best. Thank you! Now I'm going to try out my formerly "scary" ruffler!

[@kathybarry2556]

Thank you again for another wonderful tutorial - I always find them so interesting because you explain everything so well and demonstrate at the same time, which is how I learn best. I don't have a ruffler foot, and not sure if I would use it at this stage, but I can see how it would have so many applications - clothes, costumes, bags, home dec, and I don't think it looks intimidating at all, I think it looks totally cool, I'd buy it just for the look of it😊. Once again thank you and God bless.

[@SuperAngela1226]

Fantastic video!

[@shirley3012]

Absolutely amazing tutorial, thank you so much. So easy to follow and you explain everything so fully and well. If I could however give a little constructive advice here, it would have been easier to see the fabric samples better if they were in a colored fabric and not white. I found it a little hard to see the white fabric against the white machine.

[@janometracy9053]

Thankyou for the kind comment Shirley, we will definitely pass your comment on to our Marketing and Education staff regarding the contrast needed to best see the demonstration. Happy Sewing!

[@CathySchmidt]

Hi if I was gathering a dress cotton fabric what would be settings 6 , 1.8 stitch length and screw in . I have a 2004 sp Elna machine low shank 5mm. Great tutorial

[@maryannstone135]

I hope that you can advise me on why the little black U shaped bar slides off the needle screw about every 4-5” which is just exhausting!! I would appreciate some help/ advice!! Thanks so very much!!

[@JanomeJAI]

Hello MaryAnn we are sorry to hear of your difficulties with the ruffler foot. Unfortunately it is difficult to troubleshoot this issue virtually. We recommend contacting your nearest Janome authorized dealer for some troubleshooting. If you are in the United States, please visit www.janome.com/find-a-dealer/. If not, please visit www7.janome.co.jp/global/network/.

[@stevesales4263]

A very good tutorial, but too much of the video was out of focus. Maybe a better camera?

[@lenahadley6837]

Will the ruffler fit a janome MC9850? You do not mention it fits a longshank or short shank . Thanks for your assistance.

[@JanomeJAI]

Lena, the Memory Craft 9850 is a high shank, 9mm machine - and we absolutely do make a ruffler foot to fit this machine. Please see your local Janome dealer to purchase. Happy Sewing!

[@laurakilner7124]

I have a Janome C-30 I just purchased. Stitch width is 5mm low shank. I am wondering what feet are compatible with this model. I love this ruffler attachment and you gave a very detailed explanation of the best use, which is exactly what is required to get the most from the attachment. Thank you. x

[@kookyjoeb5524]

Will this work on a dc2014? My needle keeps falling out no matter how tight I clamp it in there. I can’t get more than 5 secs of sewing before it falls out….

[@JanomeJAI]

The part number for the Ruffler that's compatible with the DC2014 is: 943100000. Please make sure you have the correct Ruffler for your model.

[@shajikhan7677]

Hi dear you have done great job excellent I want to know that is this high shank ruffler foot ??because I have high shank jenome machine

[@albafekete162]

The Ruffler and many optional feet are avalable both in high and low shank as well as for 7mm and 9mm stitch width machnes. If you go to the Janome website and look up your model number you will see a tab for optional feet for you machine.

[@robertsorrels3656]

I have a Janome Horizon MC8200 QCP and I bought a Dreamstitch 2020950, will it work on my machine?

[@JanomeJAI]

Robert, only genuine Janome parts and accessories have been tested with our machines at factory headquarters. If you would like to purchase Janome accessories, please contact your local authorized dealer. Please go do www.janome.com/find-a-dealer/ to find one near you if you are in the United States.

[@Зоряна-н4е]

For the life of me can't figure out how to install it so my needle would not hit the metal. I am already at 2 broken needles. Help!!!!!

[@annielaidherhairdownd7608]

Tighten the foot screw with the screwdriver and the needle screw too. Use the flywheel to make the first stitch every time to ensure needle is centered.

[@sandrafrancis8577]

Where are you located in New Jersey?

[@JanomeJAI]

Sandra, our corporate offices are in New Jersey, but they are not open to the public. Please see www.janome.com/find-a-dealer/ to find an authorized Janome dealer near you. Happy Sewing!

[@sandrafrancis8577]

@@JanomeJAI thanks for your response.

[@kimberlyburns762]

Hi Alba- question. I have a skyline 5. Can I use a universal ruffler I have or does it have to be Janome?

[@albafekete162]

It will be best with a Janome Ruffler.

[@kimberlyburns762]

@@albafekete162 thank you

[@heathermacleod1982]

My feathers are already ruffled!!

[@bethcutburth6589]

Can’t see finished ruffle, not in camera view! Uck😢

[@DTHCoCo]

No idea how to video a white machine with white fabric LOL