Jarvis Compensator Before - After Beretta 92fs

Рет қаралды 1,956

Күн бұрын

Пікірлер: 24

@gianpalacio5635 5 ай бұрын

Thank you. Someone actually using a machine to get accurate data and not some random dude missin 12 teeth smelling like whisky through the PC.

@EmptyBrassRanch 5 ай бұрын

Thanks for watching and commenting. Let me know of anything we missed or you would like to see.

@screamoXable 4 ай бұрын

Just sent my slide off for my Jarvis comp, thanks for the vid you got a sub outta me

@EmptyBrassRanch 4 ай бұрын

Hope you enjoy it as much as I do. Thanks for subscribing!

@goodlife5825 3 ай бұрын

What port did you go with? Did you thread original barrel or did you buy another ? Have you received it yet and what is the turn around time ?

@screamoXable 3 ай бұрын

@@goodlife5825 I got dual port, actually came back yesterday. I put it on my M9A4 centurion so it has a factory threaded barrel. Took a little over 3 weeks

@goodlife5825 3 ай бұрын

@@screamoXable awesome, I plan on sending my 92FS and having them thread my barrel. I'm going with the single port. I've done the trigger in a bag conversion and made everything steel again. Only thing left to do is add the Jarvis. It's gonna be sick

@screamoXable 3 ай бұрын

@@goodlife5825 I’d expect around about a month with your shipping to and from. I have yet to fire mine, waiting for thread lock to set. Also have to re zero my sight

@TROOPERfarcry 4 ай бұрын

I have an M9A4, and was looking at the Jarvis versus the JMM, because the Jarvis can be fitted better, _AND_ because the Jarvis is steel - I _WANT_ the extra mass at the end of the barrel to help resist muzzle-flip. That said, I called Jarvis and spoke with a man there who said that they recommend the single-port compensator _IF_ a red-dot is to be installed on the gun. Otherwise there might be some reliability issues with cycling. However, I saw a KZbin Short on here with the two-port Jarvis _AND_ a Steiner MPS on top of a Beretta factory red-dot plate. Now I have the Holosun EPS Carry, and it's _HALF_ the mass of the Steiner MPS. _AND_ I'm using a Dlah-designs Aluminum plate versus the factory Beretta steel. Curiously, I can't seem to find weight information on either the Beretta plate _NOR_ the Dlah plate, but considering that the Dlah has both a smaller form-factor _AND_ is made of a lighter material, I'm confident that my plate-&-dot is about _HALF_ of the plate-&-dot that the other KZbin video was using, _AND_ cycling. I don't know what my point is. Maybe this; Jarvis recommends single-port if using a red-dot... but there's some evidence that the two-port can work with a red-dot as well, but it may be important to choose plate and optic wisely.

@EmptyBrassRanch 4 ай бұрын

I think that is probably the safe answer that they can give. I'm sure as you said, with the right combination you could get the dual port to work with some light weight optics.

@mileswelch5136 6 ай бұрын

Very interesting data.

@ChestonP Ай бұрын

Very cool! It is about time somebody video the differences using a Ransom Rest. I’ve got a Jarvis dual-port comp on a 96 Centurion. I’ve also got an SGS-style Comp, so for .40. Both do a great job in reducing recoil & muzzle flip. I recently picked up an old 98FS Target that has an inch longer barrel that is weighted, but I haven’t gotten a chance to shoot it yet since I don’t have an 9x21 ammo.

@ChestonP Ай бұрын

Also, the Berettaforum would be a great place to share your results.

@EmptyBrassRanch Ай бұрын

thanks for the advice, Ill have to check that out.

@fuzze321 5 ай бұрын

Thanks for the effort, thats a nice improvement!

@EmptyBrassRanch 4 ай бұрын

Yes I definitely didn't expect that much of an improvement. It really takes the 92 up a level.

@25Emzy 4 ай бұрын

Great vid, better numbers than expected. Would love to see one comparing the new S&W M&P9 2.0 carry comp compared to M&P9 2.0 metal frame as I’m looking at getting one of either, leaning towards Carry Comp.

@EmptyBrassRanch 4 ай бұрын

I will add that to the list and see if we can get some numbers.

@ruderabbit797 Ай бұрын

Great vid, though I would very much love to see the same type, detailed report in a comparison of this and Barrel Porting by LTT? I've also wondered if doing both would be a thing? Specifically for my 92FS (A1)

@EmptyBrassRanch Ай бұрын

Ill see about adding the barrel porting to the list of testing. I just ask for your patience as it will take some time since we are currently working on a couple other projects, plus I have had some equipment issues lately. As far as having both (comp and porting) I would think you would run into reliability issues, ballistic variations and over all functioning of the firearm. With the dual port comp you already have to install a much lighter spring for it to function. Plus I don't think at this time LTT will even port a threaded barrel (most likely for that same reason). Thanks for watching and your support of the channel!

@ruderabbit797 Ай бұрын

@@EmptyBrassRanch Thank you. Mostly wanting to know what would be best for my currently original FS (A1). Going with the comp would need a bit more changes. If they are close in functionality, I'd go with LTT's porting. Just cannot find any comparable testing out there. Thanks for all you do, no hurry.