JATO 3.3 | 57.8mph speed run | Nitro Jesus

[@BERSERKERNA39]

I have an upgraded Jato 3.3 with the aluminum trans case.

[@guilhermemacedo8943]

make a video adjusting traxxas jet 3.3 carburetor please

[@90Kenny]

The owner sold this one recently sorry!

[@jacobvoss]

😊😊 yup

[@chadpennington4594]

70+ advertised, I have no idea what mine does, but I know it is no where near 70...lol

[@90Kenny]

Oh wow I didn't know that. Maybe air fuel ratio? I'm not really knowledgeable with nitros but it seems there's a lot of fine tuning to achieve the proper running specifications.

[@chadpennington4594]

@@90Kenny yes sir! 33% nitro and some Gearing and im sure it's there.

[@eduardolopez4185]

mine does 58-59 on 20 percent fuel i am sure it do 65 pkus on 30 perceny😊

[@l4ncer2005]

Can you help me my slash 3.3 goes forward when idle in

[@90Kenny]

I actually don't know nitro. This was my buddies 😅

[@Jasonkartracing]

Pull the air filter off and see if the throttle servo is opening the carburetor slide if the idle goes down with the brake applied it’s that. If it’s not that screw the idle screw counter clock wise it’s on the right side of the carb and the last thing to check is the low speed needle and that’s on the left side of the carb at the throttle arm clock wise leans the low speed needle causing it to idle up counter clock will riching up lowering the idle

[@needmoreboost6369]

Check clutch springs

[@49854]

Adjust your idle speed screw

[@slottygw2wvw842]

Way too lean

[@90Kenny]

Yeah the owner still needs some tuning on it. Thanks for watching!