How to Make IR Remote Tester Circuit

In this video you will learn on how to make a DIY IR Sensors which is very simple and easy.
An infrared receiver, or IR receiver, is hardware that sends information from an infrared remote control to another device by receiving and decoding signals.
Materials:
🔴IR receiver
🔴Led
🔴USB Cable
Subscribe to my channel and click the bell button to be updated on my next video. Thank you for watching♥️Enjoy and have a great day.
👉 / javier'sdiy👈
Related DIY videos:
DIY RC Car from Cardboard:
• How to Make RC Car Fro...
DIY 12v Power Supply:
• How to Make 12v Power ...
DIY 13000 mAh Powerbank:
• How to Make a 13000 mA...
DIY Sander Disk from Old DVD/CD player:
• How to Make a Mini San...
3 in 1 Power Supply:
• How to Make a 3 in 1 P...
DIY VU Meter:
• How to Make a VU Meter...
DIY Face shield:
• How to Make DIY Face S...
DIY Tester:
• How to Make Test Light...
DIY Flashlight:
• How to Make Emergency ...
DIY RC Car:
• How to Make RC Car Fro...
DIY Generator:
• How to Make Generator ...
DIY Air Cooler:
• How to Make a Powerful...
DIY Water Pump:
• How to Make Powerful W...
DIY Air Pump:
• How to Make an Air Pum...
Don't forget to like, comment, subscribe and hit the bell button so that you will be updated on my next video.
#irsensor #diyirsensor #howtomakeirsensor

[@janliam85]

Ang ganda nito

[@lutongsingkit1836]

magaling,,smart idea and so creative the details is good,,hoping n mas ma level up mo p,,and people will notice your work,,good job well done

[@JaviersDIY]

Salamat po

[@catming6945]

magaling ka dito keep it up very creative sana all,talented and gifted.

[@JaviersDIY]

Salamat po

[@kennethasascastro5694]

13 years old pa ako pero nangangarap ako maka pag patent ako ng sarili kong invention keep it up

[@JaviersDIY]

Thank you sir. Just keep on watching

[@josephjems6399]

It’s very very very very very very very very very very very very very very nice

[@JaviersDIY]

Thank you

[@AbdullahiJabir-rt5lq]

a very good idea

[@CreativeWorldPro]

beautiful

[@JaviersDIY]

Thank you sir

[@aabbuu3151]

Interesting... thank you for sharing ur video

[@JaviersDIY]

Salamat po

[@banuchandhar999]

I saw many videos but u gave clarity

[@JaviersDIY]

thank you sir

[@OlatunjiMathew-lt8wc]

It truly work

[@jexjie5505]

Wow ang galing

[@JaviersDIY]

Salamat

[@AaAa-dq1cz]

Magandang skill ito kahit saan mabubuhay ka thank you for sharing your idea gracias vadillo

[@JaviersDIY]

Salamat po

[@KHOAIHOANG81]

Very Good...!!!

[@JaviersDIY]

Thank you sir.

[@kilakigadaniel]

Unbelievable idea.keep it up bro

[@JaviersDIY]

Salamat bro

[@OlatunjiMathew-lt8wc]

It work ❤❤❤❤❤❤❤❤❤

[@demunivijayantha5425]

Its working thank you sir 👍👍👍

[@JaviersDIY]

Your welcome sir

[@sandroandalesvlogs6459]

Galing nmn po sir pwde na gunawa

[@JaviersDIY]

Salamat po

[@MishyLon]

galing naman!

[@JaviersDIY]

Salamat pot

[@gracieediary1192]

galing naman po

[@JaviersDIY]

Slamat po

[@christianpalcis8663]

New learning today

[@JaviersDIY]

Salamat po

[@cynthztheone7736]

Keep it up and enjoy

[@JaviersDIY]

Thank you

[@omar28497]

🤩🤩🤩🤩🤩🤩👏👏👏👏

[@sonedrosolan6164]

👍👍👍

[@JaviersDIY]

Salamat

[@astronic4522]

Nice project brothers👍

[@JaviersDIY]

Thank you sir

[@1rayejoy]

Wow amazing

[@christinedelafuente3776]

Very good

[@JaviersDIY]

Salamat po

[@PhineappleGaming]

interesting contents sir .keep it up

[@JaviersDIY]

Salamat po❤️

[@totaniaarjay8798]

Awesome

[@JaviersDIY]

Salamat

[@ninjagracieearawaraw4217]

sana matutu din ako niyan

[@JaviersDIY]

Salamat po

[@steptodraw3811]

100 % working sir

[@JaviersDIY]

Thanks sir

[@Anaconda_MLBB]

wow nice

[@JaviersDIY]

Salamat lods

[@odifsauce4274]

keep it up

[@JaviersDIY]

Salamat po

[@kyozu5721]

Heads up to you hehe super nice💕

[@JaviersDIY]

Salamat po

[@AdongMotovlog]

Nice

[@JaviersDIY]

Slamat po

[@okkaayo8812]

Ok kaayo

[@JaviersDIY]

Salamat

[@onlydj5326]

I,t s 100% working🤩😍😍😘😍

[@JaviersDIY]

Thank you sir.

[@julieanniefegalang2938]

Keep it uo

[@JaviersDIY]

Salamat

[@George-ey4lx]

The music is annoying but good job!

[@gordthor5351]

You can also just use the camera in your phone to see the infra red light from (working) remotes.

[@JaviersDIY]

Yes sir.

[@charlet6687]

😁😁😁😁

[@JaviersDIY]

Slamat po

[@kartik1rocks]

Will it work If I plug it in USB slot of Speaker which doesn't have Remote facility so I can control Speaker with remote

[@JaviersDIY]

No sir.

[@kartik1rocks]

@@JaviersDIY Please suggest me how to use Remote With my Ubon SP70 speaker

[@Tearsofthekingdom1982]

Hi Javier I have a question for I own a Panasonic DMR es46 vcr but I can’t get the controller to work I tired to program it like the manual says but there is response can the vcr ir receiver be bad shall take it out build like you did and try it out with a universal controller if it responds

[@Tearsofthekingdom1982]

(But there is no response can vcr ir receiver be bad)

[@JaviersDIY]

Try to replace the IR Receiver sir

[@Tearsofthekingdom1982]

Thanks to your video Javier I learn how test the ir receiver and it was bad the led used it was on not the way it responds to the controller in your video and lucky I had some parts I had taken out of old vcr and set boxes and now my Panasonic DMR es46 works like brand new Javier can the ic receiver get damaged by dropping the vcr by accident I remember I was taking out from and it small drop hit the floor not a big high drop

[@JaviersDIY]

Your welcome sir.

[@basbees]

How to make the light permanently on?, any video on a simple way?

[@JaviersDIY]

You will use an ic sir.

[@basbees]

@@JaviersDIY Do you have a video on that?

[@IdikaBrendan]

Hello

[@anik2414]

How much distance it covers?

[@JaviersDIY]

maximum of 10 meters straight sir

[@1rayejoy]

Brod, pwede ba ito sa size AAA battery operated led bulb? Paano gawing steady yung light ng bulb? Anong specific parts ang kelangan. Thanks in advance sa reply.

[@JaviersDIY]

Need ka ng ic boss para sa signalling nyan

[@1rayejoy]

@@JaviersDIY anong klase ng IC sir? Pakidetalye pls.

[@cosmo_rosas]

as you can see the light is flickering how to make it without flicker?

[@JaviersDIY]

Put some ic as a receiver of the signal sir

[@Ghanis216]

Can we do this with motor

[@JaviersDIY]

Yes sir. But you need to put a ic or module to have a constant function.

[@Doitbyourself]

Please, can i use S12703 ir receiver?

[@JaviersDIY]

No sir

[@Doitbyourself]

So which one will I use?

[@JaviersDIY]

@@Doitbyourself Base on my research you can you use the S12703 receiver

[@theexperimenter5813]

no resistors?

[@JaviersDIY]

Yes sir

[@Mr011796]

Where can be use?

[@JaviersDIY]

It's a tester sir

[@akramansari-yu2bh]

KALA MAIT PR KYA DIKHEGA SIR

[@JaviersDIY]

for better understanding please use the universal language

[@kuyajamestv2300]

infared sensor can broken

[@JaviersDIY]

What do you mean sir?

[@steptodraw3811]

How much volt battery

[@JaviersDIY]

4V below sir.

[@trolllogic2897]

Sir, can I use 5mm led IR receiver for this to work?

[@JaviersDIY]

yes sir, you can

[@trolllogic2897]

@@JaviersDIY about that, I actually tried connecting the 5mm receiver and transmitter and it didn't work. The receiver only has two nodes so I don't know which node of the transmitter to connect to the receiver. I could really use some advise since I'm really interested. Thanks!

[@JaviersDIY]

The thing I have made is just a reciever, when it comes to transmitter, you can use any remote at home.

[@trolllogic2897]

@@JaviersDIY okay, should I connect the transmitter node(+)(-) to the receiver node(+)(-) for it to work or is it transmitter node(+)(-) to receiver node(-)(+)?

[@trolllogic2897]

I failed to properly asked my question. What I meant to ask was, since my 5mm receiver has no ground node, where can I connect the other wire?

[@richardv.callos3475]

Ehhh sarangan

[@JaviersDIY]

Salamat brod

[@scarymonster6346]

Filipinoob po to

[@JaviersDIY]

Slaamat

[@robert686434]

My sensor heated as well I think there is a problem with this story.

[@JaviersDIY]

You have a wrong connection sir.

[@trinistarboy1648]

My sensor starts heating up very quickly when ever i plug it in..

[@JaviersDIY]

Sir it depends on the power supply you put in. High input will burn the ir sensor. Just put 4-5v

[@trinistarboy1648]

@@JaviersDIYyh i used a low volt battery and it stills heat up😭

[@JaviersDIY]

If the you put a low voltage and it still heat up meaning there's a wrong connection in your circuit not just the connection but also the components you use. Thank you sir

[@trinistarboy1648]

@@JaviersDIY ok thank you

[@JaviersDIY]

@@trinistarboy1648 your welcome sir

[@ernestosanabria1112]

Se puede. Acer masfasil. Maldiseñado

[@JaviersDIY]

For better understanding please use the universal language

[@akramansari-yu2bh]

DIAGRAM DIKHAYEN

[@JaviersDIY]

you can follow it directly sir since it is small circuit only

[@NixRaccoon]

dont do dat

[@zahirsanchezarellano6424]

I need a special control or a normal control?

[@JaviersDIY]

Normal control sir

[@binibini3014]

Very good

[@JaviersDIY]

Thank you