These fans are insanely cheap!

I found these cheap fans on Amazon and decided to give them a try... check them out here -amzn.to/3RtlPr7
Sponsored Links:
Get an iFixit kit for yourself or someone you love at - amzn.to/3IDDkj9
Check out the new Corsair Xeneon Flex at bit.ly/CorsairJay
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: jayztwocents
Twitter: jayztwocents
Instagram: jayztwocents#
SUBSCRIBE! bit.ly/sub2JayzTwoCents

[@Failsafe31]

I actually bought this fan set 4-5 years ago, the price is about the same and the fans have been working really well this whole time. I've moved them into 3 different cases and I've still not had any issues. I do recommend them if you just need fans to move air.

[@CapaNoisyCapa]

My experience with them is the complete opposite, unfortunately. I bought a pack back in March last year to use as case fans in one of my home servers and they're rubbish. Four of them are clipping really bad at anything above ~550 rpm. I don't know when it started but I noticed it in late December when I was doing some maintenance/cleaning on several of my computers. I don't care about them failing, like Jay said they're almost disposable. But their performance is worse than having some tiny pet mouses coughing at your heatsinks.

[@seth4321]

@@CapaNoisyCapa Oh no 😅 I felt so good about them after reading the comment you replied to. I guess part of the thrill is the not knowing how they’ll hold up. Life on the edge!

[@CapaNoisyCapa]

@@Ugga-Bugga @Ugga Bugga I'm super picky about noise. Funnily enough I never could hear the infamous Gentle Typhoon motor bearing noise since I've started using them in 2011 (og Nidec and Servo, Scythe, XPG) but I can't stand any AIO because of the pump "hum". Even high end D5 pumps are starting to annoy me. I'm past my forties and my hearing is severely limited above 16Khz, FWIW. Harmonics varies a lot from one person to another because our head and torso. I c

[@BorSnor]

then you had more luck than me. i bought a set of cheap fans that jay recommended and ive had nothing but trouble. the first problem is that they were RGB fans that wouldnt work with my motherboards rgb headers, they occasionally work but i have no ability to control them so its currently at rainbow puke mode all the time. second problem the lubrication or oil or whatever is in the bearing of these fans apparently vanished and theyre insanely loud from time to time. but im happy that the ones you got worked out :)

[@danielparks9035]

Arctic p12 5 pack are good too. Probably a lot better than these but they are a little more expensive. Especially great on radiators.

[@greggreg2458]

I have them in push pull on a 54mm thick radiator.

[@tslash93]

Available in a a lot of sizes (P8, P10, P12 and P14. And also available in airflow optimized design, called F12 if I'm not mistaken.

[@fredocuomo5386]

p12s are a LOT better than these..antec storm are antecs version of the p12

[@ahuman4386]

Yeah, I seen those too and are much better. 56.3 CFM and max 1800 RPM and quiet too. And only $10 more.

[@toufusoup]

Can vouch for the P12s. They’re incredible value.

[@ChristopherWoods]

Glad to see you repping the OG brands who deserve a bit more love. I still use Antec and Arctic alongside other brands depending on use case and budget, just as you went discussed. Always worth considering.

[@nwngunner]

antec at one point was the gold standard for power supplies.

[@JerziTBoss]

All the PC I've built in recent years were using Arctic fans... They are awesome. P12 and P14 are really silent, reliable and with great performance and they cost 5-8€ a piece. I'm glad even those brands are getting some recognition

[@NightMotorcyclist]

They are not the OG Antec that we all knew and loved. They failed to keep up with the market and went downhill after being purchased by some Taiwanese company in the 2010s. It was disappointing as I had both LANBoy I and II cases, multiple TruePower Trio and Earth Watt PSUs for my old AMD Athlon XP builds that I still use to this day. Even had their PSU tester and various LED fans that were single color LEDs in the 2005 era.

[@ChristopherWoods]

@@NightMotorcyclist oh that's really disappointing. I still have a couple of Antec cases in use today! Boo... As well as a bunch of Arctic fans, brackets, plus my cupboard at home and at work always has stocks of Arctic Silver.

[@rysterstech]

@@JerziTBoss steer clear of the ball bearing co versions, those have loads of problems from the few users who bought the ball bearing models.

[@soapa4279]

IMO you can also just go with the 5 pack of Arctic P12’s for $35, and still have 4 pin PWM control, and they are also pretty quiet and perform well. Edit: A ton of other comments already pointed this out too

[@pupsaderpupin5627]

I have been pleasantly surprised by these fans, they even match the noctua 6 year warranty.

[@JohnAlzayat]

That's the one I plan to get for my 3070 build, gonna get as many as the O11 Mini can handle and maybe 1 or 2 extra just in case.

[@neondemon5137]

I was gonna say the same thing.

[@wrenchviking8527]

Dammit, I came here and said the same thing without checking other comments first. XD

[@awesomeguy7332]

used arctic ARGB for my friends budget build 36$ 3 pack for now working fine and quiet

[@QuinTheFly]

I bought and used these in my first build. They're still running today. They did pick up some noise but their ability to move air never diminished. Definitely recommend as well, especially if you're staying away from RGB. First time, on a budget build? DEFINITELY recommend these. As a side note, after such an agreeable experience with these fans, I've considered the Antec name in other products.

[@NostradAlex]

I love how so many people just mention the Arctic P12 or P14. Those are really good fans. Especially when considering the price. When the Fractal Design R6 came out I bought it and was really disappointed in the fans it came with. They pushed no air and when maxed out at 1000rpm where really loud and annoying. Then I wanted to replace them with some Noctua's but then I saw the price for the Noctua ones and researched a bit more thus I found the Arctic ones. I love the P14's I bought. The noise dropped, they moved more air even at really low rpm so much so that the temperatures for the GPU, CPU and VRM of the motherboard dropped by 10C compared to the Fractal ones at max rpm. Yes the Arctic ones running at lower rpm beat the Fractal ones at max rpm, and by a lot.

[@le-zakes]

+1 to the recommendations for the Arctic PWM 5-pack. Bought a pack when the fan bearings on my Corsair AIO wore out and to add some extra airflow to my gpu. Pleased with the price, build quality, performance, and noise.

[@beerdedphantom3925]

I did a refresh on my aging system last summer and put 4 of these in my case. I chose them because the price was right, I recognized the name, and they weren't some weird color like brown and beige. Yeah, they felt a little cheap in the hand (as you'd expect) but I was surprised at how well they seemed to move air and how quiet they were. The white blades reflect what little light I do have going on in there, which I think looks pretty classy.

[@Pub4si]

is this a dig at noctua lmao

[@ayyorta]

@@Pub4si to be fair noctua colours are unconventional for modern pc components

[@Galgamoth]

you know you can get black noctua fans right?

[@ayyorta]

@@Galgamoth they're very expensive. also the original comment does not mention noctua directly, just the colour scheme

[@bothellkenmore]

Never a bad idea to have 1 fan in reserve.

[@GFClocked]

I actually love white blade fans. I specifically prefer black frame and white blade, the look of it while spinning somehow looks great in my black case.

[@ordinary_motorist]

Going through the Amazon price history is pretty cool. In 2019 these hit Amazon at $45, spent most of their life at$25, before hitting $20 in June of 2020. Jan 31, 2023 saw them drop to $18 before the Jay bump shot them back up to $25 on Feb 4th at 2 AM

[@seth4321]

More fan videos! (Or just videos like this in general). I learned things I didn’t know about airflow, static pressure, and fan bearings. That’s why I enjoy watching your channel Jay. You explain HOW things work. Thank you!

[@itsdotto]

I also like arctic's basic fans too price wise

[@TA-bs1hr]

Silent, good quality and reliable but still cheap. I like them also :)

[@johnsalamii]

your ifixit ads may be the only sponsor segments from any youtuber that i actually want to watch

[@sierraecho884]

Also in regard to the 15V on the fan. I am a design engineer and work in the automotive industry. Our motors are rated for 12V (car battery) but are tested and will work with 9V-16V so I am sure some fans are capable to work in those kind volt ratings as well.

[@mostpplarezombies]

I have tested that with different chargers. It works.

[@michapoortvliet5259]

This brings me back. I used to love Antec. My early builds where full of Antec fans.

[@ausfoodgarden]

I have a system running Antec fans similar to these with the same bearing type. It runs 24/7. The fans were installed in 2013 and still working fine.

[@technogamer18]

I mean.. one side HAS to suck 😅 I’m sorry I had to do it 😖

[@RyTrapp0]

Jay, make sure you check out the Arctic F12 fans too - they have them in a couple different versions(3-pin, 4-pin, standard cable or daisy chainable), $30 for a 5-pack, ~$5 a piece! I tell everyone that builds their own PCs that they've gotta get a pack of them whether they need them or not, they're just too convenient for too good of a price! Nice to see the Antec name, always liked their products too. Right in the same area as Arctic, nice quality products for budget prices.

[@JerziTBoss]

Arctic P12 are also good pick for similar price and if you want 140mm fans you can pick P14... All PC I've built in recent years are using Arctic fans. It's amazing how cheap yet awesome those fans are

[@NightMotorcyclist]

All my budget builds featured Arctic P12 as they were very cheap for 120mm fans but performed well above their price class and they're PWM. Unfortunately more people became more in the know about them and they are now constantly out of stock at my local Micro Center.

[@KingFraggle]

Antec! I actually just moved my computer to an Antec case, the P10 FLUX, because I wanted a modern case that was roomy, quiet, and has a 5.25-inch bay for a Blu-ray drive (yes, I still collect physical discs, I'm old, lol). Very pleased with it so far.

[@master_baiter1873]

Hes done thay

[@RyTrapp0]

@@Ugga-Bugga lol, I think you missed the point. When one of whatever fans you have fails(because everything has a lifespan), one of these are what you pull off the shelf and throw in to get you by until you get a replacement. No shit that fans you're getting for $6 a piece aren't as nice as fans that cost $35 a piece...

[@JeriDro]

I have 5 Antec fans that I installed on the original Antec 300 13 years ago and they all still work! Two of them in the front have blue leds and still light up!

[@gamerswithchildren]

I've had these in my new[ish] build for a few months now. No complaints, and they seem to move enough air to keep it cool.

[@poopy9172]

I will stick with Arctic P12s for a long time tbh. They are bit more expensive (Tip: Arctic constantly makes discounts in eBay through its own shop If you buy at least 4 of them without the packaging and screws). Independent testing showed that P12s are pretty much as good as Noctua NF A12s, while being just a bit louder at high RPMs and having a slight noise from the rotor. On the plus side, they sell them in black and white, each one with either solid or color matched trasparent blades. Also: Gigabyte motherboards are known to be tricky sometimes with DC fans, most of the time the motherboard isn't able to regulate voltage, so they stay either completely off or at 12V.

[@jasonhenninger8220]

Direct buy from Arctic, get 5pk 3pin P12s for $24

[@Knaeckebrotsaege]

@@Ugga-Bugga Love how you spam this same stupid noctua fanboy reply on a ton of comments here. really helps to take what you say seriously... NOT

[@anandgarde13]

I had Antec's Prizm fans in my old case, they were cheap at the time, like 10 bucks a fan I think, came in a 5 pack. Looked awesome with the RGB rings, moved plenty of air. But they were kind of loud compared to what I use now, Thermaltake's Toughfan 12s (clone of Noctua's NF-A12x25). I have been considering going back because I kind of miss the RGB, and the rings on the Prizms looked really good.

[@andrewdicks2301]

I have Prism X's I considered the corsiars, but they are a complete rip-off! All controlled by the modo, they are quiet and look great.

[@wattswheelhouse]

Great content! Quality on a budget is always helpful!

[@fatbeard8072]

Heck yeah! Luv fans like this, always helps when on a budget for when helping out friends and family do upgrades and repairs.

[@PrimalDashes]

The RGB versions are decently priced too. Comes out to $8/fan for 5 pack

[@ClayVella]

How long before they sell out immediately because of this video!? 😂 Great content! Love the channel 😁

[@desupernoodle]

I'll give it 20 minutes

[@JorgeAlarconL]

1 left in stock lol

[@cjlewis4938]

A year later and the link in the description brings me to a 5 Pack of fans for $20, so (unless they did raise it at some point) it's still $4 each now

[@crazylarryjr]

I was already looking at arctic white bladed fans in both pressure and flow depending on where they'd go, these will be added to the option list. Thank you

[@exactom6320]

I did a build for a friend a few weeks back and I had him buy a 5 pack of all black antec fans that were pwm and daisy chainable for $35. They worked flawlessly would 100% use them in my own system.

[@DiddyReviews]

Arctic p12 pst or non pst are also a great budget fan. I've used them lots and they do a great job without breaking the bank.

[@ericdeltoro8484]

My goto fans are Arctic P12 fans. They move around 66CFM, good static pressure, and can easily be daisy chained. They cost about $32 for a 5 pack, that's about $6.50 a fan. I can't think of anything else to use than those for very cheap fans.

[@SkateClipsAndTips]

I tried Arctic and couldn't be happier, all their fans are daisychainable and affordable. They are also pretty quiet even with higher rpm's

[@Davethreshold]

Looks like for a budget build they would be FANtastic!

[@shryko]

Love my antec case. Used to use an Antec Sonata quiet case, now have the DP502 FLUX. Lots of antec fans, lots of airflow... I've been satisfied for over a decade since my first Antec, never had a fan die yet (although, have swapped a few fans, as they stayed with the case each time)

[@triksterx]

Haha, these are the same fans I bought to fill out my most recent build. Some day I might build an RGB rig, but I spend approximately 0 minutes a day admiring my case. Plus, the low cost let me get a couple other peripherals my budget originally didn't have room for.

[@craiglortie8483]

they have the rgb ones for @ $8 a piece.

[@Shadowbot074]

I like to think my case looks like a concert. But you don’t need rgb.

[@MrInvisibiility]

I've been wanting some reviews on Antec fans. I picked up some Antec Storm PWM fans that looked really good, haven't put them in yet. Also a good value depending on the price you snag them at. I think I paid $35 for 5. Great work on getting some content out for the budget conscious PC people! ^_^

[@fredocuomo5386]

storm is antecs version of arctic p12

[@willz34_]

Aye, been using these fans for a while now and I'm glad you covered them, they're worked well :D

[@petenielsen6683]

My first case was from Antec in 1998. I might still have it if not for its front ports being USB 1.0 and if I had known what I was doing well enough to not have worn out the screw holes for its side panel. And I only recycled a fan from it last year because it was a slower speed rate fan than ones I have now. Antec makes quality products that can last for years.

[@jimbrookshire8995]

I have been using these cans for YEARS!!! Love them! They come in pwm also! Every pc in my house has the F12s baby! Nice and quick too

[@_Turbocat777]

Been using Arctic p12 and p14 fans for years, they are 4 pin and also daisy chain and don't use molex. they are slightly more expensive but not by much and these are an acceptable option if you can't put more towards your fan budget.

[@antonijodoncevic128]

Also they are very good. I have 3x120 on front and 140 on back and top in my NZXT Noctis 450. There is nothing to beat them in that price point.

[@_Turbocat777]

@@antonijodoncevic128 yeah their price to performance is insane, are the antec cheaper? yes. are they as good as the slightly more expensive 5 pack of pwn p12's? no.

[@nickmhc]

I’m grateful Jay finally decided to make a fan appreciation video

[@aaron96244]

I agree. Another video on airflow sounds good!

[@KingJojoB]

If you didn’t come from tiktok raise your hand 🤚🏽

[@dublkrossr2059]

I've never used that dumpster app. Commie crap lol

[@Zellonous]

@@dublkrossr2059 good.

[@redbloodedamerican2346]

Nope! Will not use that Spyware.

[@mrpurple1901]

Stfu you're not gonna tell me what to do

[@bloodstone30]

And

[@UbergamR447]

Ifixit AD is literally the only AD i meet with which i dont skip because its funny and it has character! great vids guys, love em! :)

[@austincovey8790]

I've run these fans in an antec p101 case (daily driver) for about 3 years now with no issues. I also run them in a rosewill 4u rack box (the one that preceeded the unit jay used for their nas). Those have been running for over a year, basically always on, also with no issue.

[@ogm19881]

These are my go to fans in my builds. Usually 3 up front and one in rear and one up top. I don't liquid cool so I take advantage of those top vents.

[@wile-e-coyote7257]

Thanks Jay and crew!!!

[@ernestg.harveyjr7087]

Very informative thanks jay😊

[@RobertFixit]

Reminds me of guys with a successful car dyno and they go for just for a "leetle" more boost. My first time seeing a 12v fan go 15v. Very fun. For the price, I will pick up a pack of these to just have available. You can't have too many 120mm fans on hand!

[@billchildress9756]

I got a Box of those on sale! And they work very well... Bravo JAY!

[@officedemon]

thanks for the fans! i needed some for my sisters and dads builds also thanks for uploading in 4k

[@bazwynOG]

I bought the 4-pin RGB variant 3 pack of the Antec F12 in june of 2021 for $24.99 and they're still quiet and still working without issue. I was originally just looking to replace one dead lian li fan and ended up installing all 3 - it's surprising how much of a difference even a couple budget fans will bring. Can attest they do look at little wobbly, but especially with the non-RGB ones, you're never gonna notice once it's in.

[@MarkJacksonGaming]

-- They're still around. Thanks for the info. Not big into all sorts of LEDs on my case, but it does take 10, 120mm fans (not that I'm filling them all). Just needed three exhaust on the roof, one for another rig, and one backup. Perfect. Ordering them.

[@asw92104]

Used to use those Antec fans in alot of my systems, especially with the Antec 300 Case. 5 Fans filled up all 5 spots in the case.

[@kristian4243]

love the edits on this channel

[@WyattWingo]

Your probes as your voltage surprise makes me laugh; I like videos like this, lots of test hardware.

[@NightWolfx03]

I remember reviewing a Rosewill RFX-80 fan, they were $4.99 and had dual ball bearings, I had some last over 10 years. They also had the RFX-120 which was $7.99 at the time. It seems they mostly stopped selling them, but I was one of the first to review them and only 10+years later did any of them fail, was a pretty good deal I think.

[@qrsimon]

Perfect opportunity to talk about fan blades:) learned something new!

[@Hoigwai]

My exhaust fan in my case is an Antec it is 7 years old and still runs quietly and exactly as expected. It isn't the new hotness but it gets the job done.

[@hexacarbide268]

thx Jay and team. Love this types of videos. more please

[@bothellkenmore]

I'm still running 2 of the 3 original Fractal fans that came with my Arc Midi from 2011. It can be surprising how much life these basic fans can give.

[@RealRSmokinJoe]

I have some Rosewill white LED fans (7) in my case, they are fairly quiet and work well. Probably will upgrade to better fans soon, but these have been fine so far.

[@ghomerhust]

i just bought several of the older style LED rosewill fans for a couple of vintage case rebuilds, and they're excellent. lots of flow (only 80mm fans) and you can barely hear them over my noctua nfa12s at speed. and they look super 2005ish haha

[@jamesmcgee9279]

I did a budget build using these. Still work like a charm.

[@derduval2]

I have been using Antec spark RGB fan for three years now and it's never failed or had a issue with RGB or PWM . I recommend the brand based on how well these have been working.

[@thegingineer0]

Oh lol bought that exact box a few weeks ago. Great to have around.

[@Chris_In_Texas]

I still have a few Antec cases, that still work just fine, even with modern day hardware and power supplies, and the are 20 year plus old. Great sleeper cases! 👍🤠

[@brentsmithline3423]

Great clip. To help with dust put a filter before the fan air flow.

[@Psyphoid]

I have been extremely happy with my ez diy fab moonlight fans from amazon. I paid about 6/7 bucks a fan with rgb and they have nice to have features like rubber grommets on the corners for vibration dampening.

[@MichealConnacht]

I used these fans when I initially built my current PC. I upgraded to some Antec ARGB fans, but I'm old and remember when Antec cases were some of the best on the market.

[@jesh879]

Same man. I remember when Antec literally invented the bottom power supply location in a separate chamber. I remember when they were made of steel so thick you could stand on your pc case to change a light bulb. Those were the days.

[@corinelson7837]

Been rockin' these for a couple years now, still super quiet and I live in a high dust environment(3 kids, 2 dogs and the odd cat that follows a dog through the dog door).

[@DEJ915]

These sort-of remind me of the Phanteks MP fan design and those happen to always wobble too (at least every one I have does it). Antec also had a 120 fan that looked similar to the Arctic P12 for like 6 dollars and it was pretty nice too.

[@TheFreakazoid67216]

I bought a set of 5 for my daughters PC that I built for her a while back. I got a set of 5 Prism series 120mm fans. These have been great for her computer. Spent about $60 because of the rainbow vomit, so it broke down to about $12 per fan. A little more than the fans you are talking about in this video. But I actually have a similar set on order for my current build to move more air in it as I am running an air cooled 5900x

[@peteranserin3708]

I'm still using my 15 year old Antec fan with the attached slider switch. amazing fans for cfm.

[@BitZapple]

I like the Arctic P14 Argb, those are insane value.

[@FoxSiR]

Thanks Jay & Team, building my first PC and this will help out alot only need a cpu and M.2 drives

[@anthonyholmes5965]

I have a Antec case and I use the front fans and the header that came with it and they all work fine. Mine are RGB but still 3 pin and fairly quiet in my DF700.

[@rumblepuffgaming9415]

I have a bunch of Antec RGB fans in some of my cases. They are my go-to for people who need a more budget PC. They have 120 and 140mm fans that look the same too, which is rare to find now and days.

[@chemmustang656]

I just ordered a pack those fans on January 31st from Amazon for the front intake of some cases at work that only have a 92mm exhaust fan. Haven't installed them yet.

[@RoshiGaming]

Antec fans are what I got for my parent's computer years ago (probably 5 yrs?) when their fans locked up... they're still holding up to this day!

[@Dingusdoofus]

Ok but what if I want my $4 fans to suck? Like how else am I supposed to get cool air into my system if the fans don’t suck it in.

[@alaricjeard269]

Big up for Derek ! Great car channel by the way!

[@WunjoxFlo]

My custom watercooling PC is equiped with 10 Arctic P12 and for 25€ a pack of 5, it's a steal. Yes it's not as silent or efficient with radiators compared to a Noctua, but it gets the job done perfectly

[@riddlex]

This is why I love J2C, I thought while watching the video, what if I pass more voltage into the fans, and boom, Jays does it.

[@darkfoxx87]

I used aerocool shark 120 and 140mm fans for my last build paired with a couple of pci rheobuses. Lots of cfm even turned way down making no noise.

[@RevFilmore]

I got the ones marketed under the Arctic brand (same frame same color same thing different name I guess) almost 5 years ago and they are still running A-ok in my case which I don't dust off as often as I should. Good stuff.

[@Wymberto]

you can control 3-pin fans with a fan curve, however on all the mobo's i've had you can't set them lower as 60% fan speed. which can be pretty loud depending on the fan

[@HeavyIronsProduction]

This came at the best time, i was looking to update my fans and was dreading it. I dont need the latest and greatest so these will last while i save for a new system.

[@GuyManley]

Woo cheap amazon fans. I still uses 3 or the 5 pack up here and integated control kit in my mini atx build.

[@munchkinmatt1670]

Oh yeah! I've purchased these for a friend's build. They're great budget fans if you need any airflow at all. They're great.

[@joshuaklaassen5966]

These videos are actually really helpful. Most people won't pay the 20+ usd per fan. Great for upgrading my father's pc.

[@Artista_Frustrado]

glad to know cheap good fans are still a thing i can keep an eye on, also that logo is nothing a Sharpie can't fix

[@guliver21]

MAN, i never get tired of your ifixit ads, juts AMAZING!! KKKKKK

[@hammersti3n540]

Antec Lanboy cases where the must have case back in the 00's still have a super lanboy and boy it looks good have the rgb version of these in it

[@haroldmiranda9906]

Good company. I had these fans on my old build. They still run great. Their customer service is great too. One time, I had an 80 plus bronze PSU from them that died within warranty and they replaced it with an 80 plus platinum lol

[@makun16]

What would you recommend for 140mm fans? I don't do rgb.

[@ethum2]

Does Airfloow and Static pressure really matters these days? Got a cheap CoolerMaster NR400 and I'm looking to optimize the airflow inside. Any tips?

[@mfelipetc]

This iFixit ad doesn't get old, I'm never tired of watching it!

[@mersinaryboy]

I'm actually upgrading my case right now. Due to it being ancient and poorly optimized for thermals and this is literally perfect as I only have 3 working very LOUD fans. If these are as quiet as they seem, I'll be a very happy camper for the price.

[@jthiel0711]

Antec used to be the goat. First pc build in 2007 was all antec stuff. Build is in my garage but still works to this day.

[@BenFilley]

Can confirm I’ve been running 3 pin on everything (for years) except the pump and have no problem setting curves.

[@geekdoh]

That is still my favorite ad intro ever.... I laugh every single time.....

[@JamieKitchens6]

My daily PC is a pre-built machine from CyberPower PC from 5+ years ago. Would I be able to install these fans anywhere in the case? I don't see any designated cut-outs or other places for them to be anchored.