MK8 Fiesta ST - REVO Induction Kit REVIEW & SOUND CHECK! 🔊

[@OliverH97]

The editing at 3:07 is just class

[@JBCTR]

Did you notice it at 0:05? 😉

[@webman2175]

Whoosh as you zoom down the road - cool sound though your impression of the noice cracked me up!!

[@jonnymarsden1935]

Just got to say mate, few mins in watching and you've got some cracking natural lighting there, just makes the vid better. Great choice of timing/positioning!

[@JBCTR]

Yup. Good time of evening to be filming! Doesn’t last long though, so gotta be quick 😂

[@SSykotic]

Mate you need to take the insulation out of the bonnet! I've done it on my Polo GTI and the induction noise is so much louder as well as the turbo spool!

[@stevel3788]

Great video - editing, great presentation and an awesome Induction kit !

[@tomliamkins]

19 Plate onwards has much more induction noise standard, mine sounds pretty much the exact same as yours but I've only got a C:Performance induction kit. Interested to hear one with the Revo or Pro Alloy kit installed

[@JBCTR]

Yup think you are right there. The newer cars without the dump/recirc valve from factory do seem to respond better to induction kits (in terms of sound)

[@louishamilton225]

You always have the coolest lighting in your videos I swear! :D

[@JBCTR]

The lighting on this video was more by luck than judgment 🤣

[@iordanisgeorgiadis2528]

Thanks for the great vid mate, as always... but as a fellow mk8 st owner I must admit I am a bit jealous...your st looks and sounds fantastic! May I suggest a delta styling spoiler riser next... Also any news on revo stg2 software?

[@JBCTR]

No news on Revo stage 2 unfortunately. They’re researching the restrictions of the GPF I believe.

[@ells-aviation]

Love the wheels

[@JBCTR]

Revo RV018’s 👍🏼

[@Langers69er]

I’ve had mine on a week and love it, worth waiting for 👍🏻

[@idek_man007]

Great video!! I was wondering if you think I could fit the same kit to a 1.0 Ecoboost which isn’t an ST? Just a simple Fiesta Titanium!

[@MrSmartstots]

Great video as usual but my 2020.25 with a cotton cone (Think it’s Airtec) makes the same noise with windows up and original ford piping as yours does, third gear 30 mph foot on then foot off

[@mikeekim8768]

100 ron fuel-temperature 33.4 (° c) -power 229.7 hp 5301 rpm - torque 37.9 kgm 2835 rpm

[@andy-yb4ch]

The ram air kit sounds just as good and for way less.

[@PeterParker-fo9wj]

Editing is class, presenting is great 👍 Almost like watching a BBC car program lol

[@JBCTR]

Cheers mate 😎

[@fuzzy5987]

I'm liking this, I might have to get one for mine 👍🏽

[@jakeco5591]

Do you need to run revo software to use that induction kit?

[@mikeekim8768]

I also put the revo intake kit in addition to the revo stage 1, resulting in the bass losing a lot of power

[@JBCTR]

What were your before and after figures?

[@mikeekim8768]

@@JBCTR I have no before and after graphics but I noticed driving that it pushes after 3000 rpm ,,,,, before it pushed from 2000 rpm

[@mikeekim8768]

I only have graph after edit ..... post graph after

[@johnpardo4695]

I'm interested

[@aledbound4426]

I have to ask, do you do your own editing? The edits and transitions on every single video you make are top quality!

[@JBCTR]

Aled Bound Thanks mate. Yeah everything you see on screen is my own from the titles to animations. The only shortcut I’ve taken is a small transitions pack which I use sparingly 😁 the videos take a little while to produce but I think the extra effort is worth it 👍🏼

[@aledbound4426]

@@JBCTR awesome stuff! I've just finished changing all the lights on my MK8 ST using all your tutorials! Used the exact same ones as you from CEUK, hoping to make some more upgrades from them soon as there's too much to choose from😂

[@JBCTR]

Aled Bound Sounds awesome! Good luck with it 😎

[@Chappers.Gaming]

I can't decide yet if I should buy one now or wait until a facelift model, I feel if they do a Facelift, ford will give the ST the new virtual cockpit that the other Fast fords got, I think it was the ford puma not sure but it looked cool

[@JBCTR]

The new virtual cockpit is pretty cool. Not sure if/when it’ll come to the fiesta though!

[@Chappers.Gaming]

@@JBCTR I gotta say if they add that to the STs it would just take the car to another level as of interior design, and I think they should bring that out with a customized option to as that would be an amazing upgrade for the car. it would make you feel as if your really in a higher end car. EDIT: also ambient interior glow would be a pretty cool feature, as long as you can turn it on or off ( some will not like it and some will ) I think it would be good.

[@ghrenu]

Sounds like a squirrel mating 😂

[@Maxotc]

how do you know that 😅

[@AverageJane222]

😂😂😂

[@adrianconesa2704]

Cool vid, do you plan to do a fake engine sound delete in the cabin? Because many car manufacturers do that, even in the urus 🤔

[@JBCTR]

I’m not sure it’s been done on the MK8 yet as it’s pumped through the speakers. The MK7’s used a resonated box that could be simply disconnected but not as easy here. That said, I can’t say I’ve noticed the fake noise.

[@chriselse515]

Like the kit and the sound but it's bloody expensive 💷💷 any heat soak issues with it being open cone?

[@JBCTR]

Not noticed any, but I’ve been running an open come for over a year. This kit introduces the free flowing pipe work around the rear of the engine, which is the most noticeable change.

[@glx_hexe7131]

Hi , do you need a remap after installing this?

[@JBCTR]

You don’t need one, but it’ll make one hell of a difference if you do!

[@jameshartley95]

gorgeous car man.

[@JBCTR]

Thanks 🙌🏼

[@jameshartley95]

@@JBCTR i always loved the look of the mk8 fiesta st over the mk7 its so much smarter i was just so upset about it been a 3 pot. they just sound like shit to me. im glad this video gives some hope! id love to have a mk8 one day! but until then ill keep blasting in my mk5 and mk6 fezzys :D

[@RobinvdTube]

Pretty awesome stuff man! good choice =) Mini RS ;-)

[@ad_182_uk]

Does the MK8 run a recirc/diverter valve of any type, assume any lift off noise will increase if a non OEM unit is used?

[@JBCTR]

Earlier cars have a recirc valve. The newer ones don’t. If you add an aftermarket valve it’s a very different type of sound to the induction kit.

[@KoriFlare]

@@JBCTRhey man I got an early 2019 st and I noticed that it has a bov valve, can i just unplug that and make the intake louder in terms of flutter sound as newer cars or it’s a problem? Cause I’ve heard that newer cars have a reinforced turbo just to handle the air pressure inside of the circle without the bov. So I’m just a bit scared of breaking my turbo

[@santiagojaramillo2695]

Do you know how lucky you are?? Hahahaha make those modification in Spain mean a expensive fine... I don't know if it is legal in your country... Enjoy that pretty ST ;)! Full gas!!

[@CamCSGO]

Funny that 😂 I lost a rubber grommet when I was taking out my airbox to put in an Airtek Kit, Where can I get another one haha

[@JBCTR]

Ford sell them. SCC Performance sourced mine :)

[@leokaras5353]

Did your change the blow off vale or its the original?

[@JBCTR]

Nope. Standard recirc valve 👍🏼

[@piercedvampireslave]

Pro vid as usual!

[@mikeekim8768]

I can't insert photo graphic rolled test bench

[@mikeekim8768]

stage 1 + Air Intake System

[@beliveu2454]

Does the rain not enter the filter?

[@JBCTR]

No, the filter is quite shielded where it is. It’s also oily to repel water that gets near it 👍🏼

[@Thatsatree]

Let’s goooo

[@TwodaysTuesdays]

will this fit onto the mk8 st line x

[@JBCTR]

Unfortunately not!

[@keithhedley1392]

How much is it, sounds cool

[@benkirkham2017]

£310

[@keithhedley1392]

@@benkirkham2017 sounds like money well spent

[@Geoffbell01]

Pity they couldn’t get the cross over pipe right the first time around - lol

[@Elementpunx]

So this is without blow off?

[@JBCTR]

Yup. Just standard recirc valve.

[@Elementpunx]

@@JBCTR Thanks man! Could you please tell me how much louder is Miltek vs stock (in normal mode)? I am planning some mods for the summer and exhaust is the biggest question mark due to me parking close to others windows :)

[@JBCTR]

@@Elementpunx Milltek is fine for a residential area. It’s still valved, too.

[@SilverTrill]

@@JBCTR how come you changed induction 3 times ? Which one do you think is best

[@ivanaguilar6949]

United States ST drivers punching the air rn.

[@kd2833]

beter get a ramair one 3x less money come with 1/3 alu pipe 480 euro noise maker is nuts

[@stevenjacobs270]

not easy to instal

[@JBCTR]

The crossover is challenging for sure…

[@bagelbytes69420]

I hate ford for not bringing this version over to the US... -_-

[@OG-97]

I don't know what it is. I just can't like any fiestas after the Mk6

[@oootaffooo501]

He thinks he's on top gear 🤣🤣🤣🤣💯👍

[@edwinmahommedbhembe2451]

Sell me ur OEM rims🙈

[@Andy-2022]

Thumbs down, sounds like the dump valves on the chav cars

[@fiestone1]

Poor car... 💩💩💩💩