JBL BASSPRO HUB SUBWOOFER INSTALL! | FOCUS RS

I upgrade the subwoofer in my RS!
This is the second half of the sound system / audio upgrades that I have now completed in my Ford Focus RS, with the first being the door speakers and tweeters from Powerbass.
The Powerbass upgrade was done along with Dynamat sound proofing and was a worthy upgrade, replacing the average Sony speakers to give a richer sound with more clarity and frequency coverage.
There was still compromise with this setup - the Ford / Sony subwoofer. This passive subwoofer that splices signal from the rear door speakers is surprisingly an optional upgrade from Ford.
The main issue is that it is passive. It is also very small but size is irrelevant as it would never have enough power to drive a decent amount of bass. So even with the best EQ settings in the Focus RS sync system, it was always lacking. This is especially evident if you ever compare the Ford / Sony sub setup with a different car that has an actually good woofer option.
It was therefore a needed mod to compliment the excellent door speakers - replace the Ford / Sony sub with a powered woofer - enter the JBL BassPro HUB!
This is the perfect replacement for the Ford subwoofer as it active, peaking at 200W RMS from the built in amp, but also fitting into the factory subwoofer location meaning we can go for an OEM plus install!
Of course, being that we are coming from passive, there is the issue of getting a power source. This I resolve elegantly using the fuse panel beside the subwoofer along with a piggyback cable from Autobeam which works great and is much easier and convenient than running cable all the way to the battery!
I also continue the OEM plus and convenience theme by installing a matching Molex connector to the JBL wiring harness that allows plug and play connection the factory Ford signal connector!
This install has a couple of tricky elements but the results are amazing!
JBL description:
JBL’s BassPro Hub Subwoofer Rattles Your Rear View Mirror.
The new JBL BassPro Hub subwoofer delivers show & shine performance without crowding your passengers or sacrificing cargo area. This all-in-one powered subwoofer system fits into the hub of your spare tire for a super easy installation and out of sight sound solution. The built-in Class D amplifier delivers 200W RMS and is designed to work with the BassPro Hub subwoofer and enclosure as a system. The 11" (279mm) feather-light fiberglass woofer cone with rubber surround delivers the signature kick and punch of JBL bass. And with over temperature protection (OTP) and over current protection (OCP) you can count on reliability at peak volume levels. The included remote control enables adjustment of crossover point, gain, phase-and a bass boost of 12dB when you’re in the mood and on the move.
Fiberglass Woofer Cone with Rubber Surround
The 11" (279mm) woofer cone is engineered to deliver fast and tight, deep bass with low distortion and unwanted second and third order anomalies.
Built-in Class D 200W RMS amplifier
The JBL subwoofer system’s built-in amplifier is optimized to work as a system with the woofer. Its Class D design runs cooler and draws less current from your vehicles electrical system making it the perfect concealed subwoofer solution.
Wired Remote with User Interface Controls
Gain control adjusts the volume level right from the drivers seat. Phase switch changes the input phase to inverted or noninverted. (This can sometimes be helpful for troubleshooting.) Crossover frequency control adjusts the crossover frequency to any point between 50Hz and 150Hz. Bass EQ control provides 12dB of boost.
Line-level Inputs and Speaker-level Inputs
The JBL BassPro Hub has line level inputs and speaker inputs that allow you to connect to any car audio system making it a great upgrade to your factory system or the bass foundation of the aftermarket system of your dreams.
Harman Standard Reliability Testing
JBL speakers have to undergo a testing process that would destroy lesser speakers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Molex part numbers:
Pins: 33000-0002
Connector: 33482-4001
Available at www.mouser.com
Autobeam piggyback fuse connector:
autobeam.co.uk/products/mini-...
Powerbass speaker upgrade and Dynamat install:
• POWERBASS SPEAKERS & D...
Check out my BigCartel store:
adamrainey.bigcartel.com/
Check out my Spring store:
teespring.com/stores/adam-rainey
Use code WL3327 to get $20USD/$20AUD/£20GBP off your first purchase when you spend $150USD/$150AUD/£150GBP or more at:
Whiteline North America: whitelineperformance.com
Whiteline UK/Europe: ukwhitelineperformance.com
Whiteline Australia/New Zealand: whiteline.com.au
Get 15% discount with code 'adamrainey15' at ukstore.turtlewax.com !
Subscribe to my channel: bit.ly/29hfAm6
Instagram: bit.ly/2930j8A
Twitter: bit.ly/2930j8A

[@MattBriggs-vu8wi]

Just wanted to say that I followed your procedure in this video and it worked a treat, only took an hour including making the connector up, many thanks!

[@Ahmed_SA82]

Great and clean factory install. Excellent job. The only negative point is that thin positive wire. This is a 200w subwoofer. The wire should at least be 8 gauge, otherwise it can melt and can cause fire. The fuse on the subwoofer it self is 30 amp. I really recommend you get the positive wire from the front battery directly.

[@mdanielsolis]

If I used a 14 gauge wire lime this set up will it cause issues.. if I didn't run it correctly to battery

[@mdanielsolis]

Like**

[@Ahmed_SA82]

It depends on your subwoofer power, but if you really run the sub at high volume for a long period of time, you can melt the wire

[@mdanielsolis]

@@Ahmed_SA82 I did the same install and used 14 gauge wire... or 16 can't remember

[@matthewholt6985]

@@Ahmed_SA82 I did the same install and had issues with the bass not working after about 10 mins of driving, as soon as I turn the car off and on the sub starts to work again so I’ve change the cables to 8 gauge power and earth, made sure there no paint around the earth mounting point and still having the same issues need help!!! 🤯🤯🤯

[@mrfizeg8661]

Awesome quality vid as per usual Adam 👍👍👍👍

[@AdamRainey]

Cheers mate :)

[@wolffredd2664]

I’ve been eyeing one of these for my Camry, great timing on your video!😎

[@AdamRainey]

cheers, you will love it!

[@sharanpreet5559]

Did you got it?

[@djsmith5194]

Same here I want to keep it factory but add this in the trunk

[@DerVandriL]

Man that's genius, thank you! I used to draw power through whole car in my old bmw 😅

[@jonathanwalmsley2055]

Great video mate. That's now next on my list 🤪😎 could you provide the links/list of the bit's i need to complete the job 😀

[@indysbike3014]

I bought all the connectors you have and the first thing I noticed is the red power cable on the jbl is big (and splits into 4 smaller cables to the connector) while the fuse splitter cable is much thinner. Since I’m not confident enough to connect a wire to the battery I will just run it this way and see what it does. Thanks for the video.

[@iansmotor-world9174]

Great video what’s the details of the plastic connector & clips please ?

[@defektedtoy2731]

How the hell did you figure out what connector to buy from mouser? I have a 2021 trailblazer and id like to make this install as easy as possible without needing an lc2i pro.

[@wojciechkanclerski]

Does anyone know... Will this RS trunk foam fit in tournier ST?🤔

[@musicx.1684]

Hi. Great install thank you very much. I now did exactly the same with my own RS. The only thing I changed is I used 2 Fuse connectors with 15A each because of the thin cable. Unfortunately I now have a problem with my sub. While driving it just shuts off and I don't know why. Sometimes after 5 min sometimes never. Once I had no sub straight after starting the car. Power connection is good. Even the LED on the sub is still green without any sound. So I'm guessing it has to be de sound signal. Connections there are good even a wiggle does not bring the sound back. Just shutting the car off waiting for 1-2min and starting it again will fix the problem. Any ideas about that? Would really help me.

[@Adolf-w2i]

Own the same sub in my Volkswagen tiguan allspace premium elegance 2022. I love it 😀

[@cjmackay9804]

Good install Adam 👍🏻 what are your long term plans for the focus are you keeping it for years to come or do you have a time in mind when it will go? Is there another performance car you’d like to get your hands on?

[@ralphpeiris5996]

Thank you. I followed your instructions to the tee and it worked. I guess Euro version and American versions of the Ford Focus RS are different. Hey thank you again.

[@mdanielsolis]

Did it work for u.s version

[@ralphpeiris5996]

Yes get everything Adam mentions

[@mdanielsolis]

What size bolt used he said 150 mil.. how many inches also do you have it connected to fuse panel or battery

[@ralphpeiris5996]

@@mdanielsolis i don’t know the answer

[@mdanielsolis]

@@ralphpeiris5996 my question being did you connect the power like he did to fuse box or did you run it to battery for sub

[@phmaris]

Good video! I’m glad someone is still putting on focus RS content.

[@AdamRainey]

Cheers Phil - More to come!

[@phmaris]

Bought the basshub unamplified version. Gonna throw 600 watts at it 😮

[@ytna28]

Man this is nice install. Great job!

[@stephanschmitt9887]

thanks for the instructions! Question: as you're not using the amp remote cable (blue), will the sub run all the time while ignition is on?

[@AdamRainey]

Exactly, yes indeed

[@fallan11]

Did you have to replace the Sony / stock amp for this build / your speaker build ?

[@AdamRainey]

Nope, everything is stock other than what you see me replace

[@dariuszstaciwa1078]

I need help. Can anyone tell me if it works without remote controller, or can i use other JBL controller? I dont't have factory controller and i can't find IT to buy here on Poland. Maby you know where i can buy factory controller?

[@ThomMurphy]

It needs the included wired JBL remote to be plugged in.

[@ralphpeiris5996]

Where did you get the clips that plug into the Ford Focus Rs?

[@AdamRainey]

Imported from an American retailer so postage costs were a little expensive

[@ccvservice11]

Hay bud wots the cost

[@Vash612584]

What did you end up doing to be able to keep the stock floor?

[@AdamRainey]

Hi Aaron, I cover that in the followup video just released a few days ago: kzbin.info/www/bejne/rJWqinx-mLWEoNU

[@hckrmnthr4340]

👌🏼 noice

[@AdamRainey]

very!

[@rhajaro4909]

Thanks for the Video!

[@AdamRainey]

Thanks for watching!

[@sharanpreet5559]

CAn someone explain me what will be the best remote knob settings. Cheers

[@djsmith5194]

I usually go for gain down bass boost up. But go for what sounds best to you just have to mess with the knobs for a minute

[@rpeg18]

Hey mate, great install! Did you notice any dimming of your headlights when playing? If not, what's the specs on your battery? How's it working with your stock radio, any problems so far?

[@janjohnny4945]

Hey what wiil play better alpine swe-815 100 or this jbl?

[@ThomMurphy]

This.

[@salvadortorres9908]

Do you not need the blue remote wire? I thought without it the amplifier would not turn on

[@AdamRainey]

No, it is not needed with how I did the set up. It's that not clear if you watched the whole video?

[@indysbike3014]

If you use high level input you don’t need to connect the blue wire.

[@stephanschmitt9887]

I use the low level input and I have to use the blue remote wire. Without the blue wire my sub won't power up

[@neilchirico]

Rotate the BassHub with the wires at the 2 o'clock position instead if 3 o'clock and the wires will lay down nicer.

[@AdamRainey]

they won't because of the way they come out of the side of the jbl

[@garys9718]

But is that fuse wire enough to supply power for the sub🤔

[@AdamRainey]

You could always watch to the end of the video where the sub is in full swing

[@ThomMurphy]

No, absolutely not enough to be safe.

[@marionavarrete2809]

Details of they plastic conector please bro

[@AdamRainey]

Details are in the description

[@mdanielsolis]

Have you had any issues with the setup, or have to run a different power cable?? To front instead of rear fuse panel

[@matthewholt6985]

I’m having issues with the sub going off while driving for about 10 mins then if I turn the car off and back on sub starts to work again I’ve done the same setup with all the same parts but not sure what the issue is

[@itsmedeka]

@@matthewholt6985 the amp in the sub is shutting itself off due to heat.

[@matthewholt6985]

What the best way to go with it I have ordered bigger earth and power cables

[@mdanielsolis]

I ended up routing it the way your supposed to directly to battery..

[@matthewholt6985]

@@mdanielsolis did that work alright or you still having issues

[@christopgun09]

won't overheat because the factory wiring is 16-gauge wire as long as u use 16awg or bigger it will be fine. because the factory wire will overheat first

[@mdanielsolis]

I'm confused can you elaborate what your saying here.. is this even ok to install this way without going directly to battery.. the way he did it at panel is ok?

[@ThomMurphy]

The panel is not OK for this sub. The panel is fed by a long small wire and feed several other loads. This should have a deticated wire of at least 8 AWG, preferably at least 4 AWG directly from the battery and be fused as close to the battery as possible, but no more than 18 inches (~450mm).

[@x58evo2puma7]

Yes these Rs subwoofer sounds not very good u need to upgrade your sub to get the best sound out I have upgraded mine and door speakers and the sound of the different sound much better well done

[@louiselewis853]

I did exactly what you did today but for some reason it only worked for a few seconds. It then cut out and now no sound is coming from it. Still got power but nothing else 🤦🏼‍♀️.

[@AdamRainey]

That's odd, not an issue I've come across. Anyone else here experienced such a problem?

[@ceebzzyba8708]

check the fuse on the sub see if its ok.

[@musicx.1684]

Did you ever fix your problem?

[@louiselewis853]

@@musicx.1684 no. It works for a while (sometimes it'll stay working) but most of the time it'll stop in between songs. Used to it now lol

[@jimkryzak811]

Great professional install. I like that you found the part number for the molex connector, and connected into the rear panel fuse panel. Your video was very helpful inspired me to put a better subwoofer in my Focus RS. I used the Cerwin Vega VS12SH 12” spare tire subwoofer and a separate AudioControl ACM-1.300 300w rms amplifier. I also bought the optional bass control knob and mounted it in the dash pocket next to the USB. I ended up trimming the foam out where the subwoofer resides and fabricated a flat center mount. This allowed the subwoofer to sit flush with the top of the foam(the VS12SH is only 4.7” tall). Thanks again for the excellent video!

[@jaimerivera7872]

how is it holding up?

[@AdamRainey]

It holds up perfectly to heavy use over time

[@emmanueldpv7683]

does it need an amplifier?

[@AdamRainey]

It has an integrated amplifier. I'm pretty sure that is mentioned in the vid...

[@emmanueldpv7683]

@@AdamRainey My bad, I didnt run into the details, english is not my main language and since i finish college time ago im geeting really stunt some times. I was confussed becouse some other guy, in another video, installed an amplifier. Thank u sir

[@djsmith5194]

@@emmanueldpv7683yeah I believe you can get these subs without an integrated amp so you can connect to a separate aftermarket amp… but don’t quote me on that lol

[@chomp098]

AWG stands for American Wire Gauge,