If you have an old GO or GO2 speaker with an expired or flaky battery, then watch this video to find out how i fixed my JBL GO2 for cheap.
Пікірлер: 61
@adiavivi13798 ай бұрын
I followed your instructions, I used brand new cheap 18650 cell (with matching case) and it works. I will try to remember to return and update if it also charges the battery completely and how long this 1000mA capacity holds my trance music on. I appreciate this well done video !!! Thank you for this contribution!
@ELChalmers3 жыл бұрын
Thank you. I did it with JBL GO 1 and I put smartphone baterry 2500mah. Fit good in the back of the speaker, then I used silicone and decorate with nails painting colours to customise it. For now it's working fine.
@macforcheese3 жыл бұрын
1. JBL website lets you customise this speaker - happy I can keep it after it's eventually discontinued! 2. I'm usually frustrated with videos but this one was very clear to me. Thank you making this video.
@gsgsvsb37155 жыл бұрын
Uses a battery of smartphone of 3000 mah and you have 2-3 days de autonomy and it is ergomomice on the back. isolated wich silicone hole and cables.and you can put it in the water .Tested from Romania😉
@gabrielldarllo13784 жыл бұрын
buna idee ionele ...eu am facut la fel ...4..5.zile la maxim
@johannesvetter22462 жыл бұрын
@mygiguser good work so far, but wouldn't it be easier to simply connect the battery to an usb cable and power the speaker with this? regardless of the internal battery being damaged or not charging any more - should work as well i think.
@djswergvic3 ай бұрын
Better but you will need a charge controller
@MegaSafetyFirst5 жыл бұрын
Awesome idea! Did you try out yet how long the speaker will play with the bigger battery?
@mygiguser5 жыл бұрын
MegaSafetyFirst i think it is going to play three times longer than the original.
@MegaSafetyFirst5 жыл бұрын
😎 cool, thx@@mygiguser
@sanjay74875 жыл бұрын
mind blowing...........bro. u r super human.....i tried once but got stucked...left thereafter..
@noncesens3179 Жыл бұрын
thanks for the look inside, I wanted to check wether it is possible to use a bigger battery than the one that is included, like 60mm 40mm 6,5mm; do you think it is possible if one removes the middle supports? I wouldn't want to drill the casing in any way though.
@mygiguser Жыл бұрын
No, there is no space in there. You could 3D print a larger casing, but that would be a lot of work.
@noncesens3179 Жыл бұрын
@@mygiguser Yeah afer having a closer look that was my impression too, because it can't be too thick and the indentation for the chassis shows it can't be larger.
@begonewaifu45823 жыл бұрын
why not just use a 20000 mAh Power Bank?
@nates12322 жыл бұрын
To bid
@dyrotheskededet2633 Жыл бұрын
can u name all ur tools bro?
@mygiguser Жыл бұрын
no
@krzysponczek37362 ай бұрын
This is not a battery hack but this in recipe to how destroy your speaker.
@mygiguser2 ай бұрын
well, my speaker still works like this after all those years.
@wrenchaholic2 жыл бұрын
if your gonna go this far they sell actual replacements that fit instead of hanging out the side.
@mygiguser2 жыл бұрын
they have replacement batteries for the Go2 ?
@francisrodriguez98243 жыл бұрын
Probably just gonna buy a new one
@VWLuka2 жыл бұрын
it's possible to jbl go 1 ?
@mygiguser2 жыл бұрын
i guess yes, why not?
@Nathanael.Thomas2 жыл бұрын
I just came across a small pile of faulty JBL Clips. Would I just need to short a couple of pins to bypass the battery and use a power supply? Anyone else has done this?
@Deathknot Жыл бұрын
I'm also looking for this.
@0SinfulAngeL04 жыл бұрын
Is that method also applicable for the JBL GO?
@mygiguser4 жыл бұрын
I don't see why not.
@0SinfulAngeL04 жыл бұрын
@@mygiguser I am going to bypass the battery and work it directly with usb power. Is it posibble sir?
@thegeekclash81794 жыл бұрын
@@0SinfulAngeL0 may not , Usb provide 5V ,where as battery provide 3.7V . So operating directly from USB is not safe
@JohnLempidakis3 жыл бұрын
Question how do you know your speaker has bad battery?
@rokasrackauskas95632 жыл бұрын
it's a really good idea if your power bank has 3.7V batteries and they're connected in parallel.
@IWillBrutalyRemoveYourBalls3 жыл бұрын
Tell me the battery specs
@loebrally5 жыл бұрын
Nice job
@loebrally5 жыл бұрын
Is the device stable ? Problem? Stabil work ? Is it charging ?
@mygiguser5 жыл бұрын
loebrally it still works for me, no problems so far.
@loebrally5 жыл бұрын
mygiguser upload the video, please. Thanks goodjob
@domimarci335 жыл бұрын
remove the 13 g weight to make it float in water (-:
@IWillBrutalyRemoveYourBalls3 жыл бұрын
It's not enough to make it float
@RexFixx2 жыл бұрын
This gonna work 9 days straight
@edgar011119804 жыл бұрын
nice, the charge on mine is getting weak, might try this thanks
@ThugSouL1998YT3 жыл бұрын
Helpful
@mygiguser3 жыл бұрын
Glad it helped
@shahidzohra50983 жыл бұрын
Well done 👏
@lodismotovlog4 жыл бұрын
maybe i can use powerbank
@tadeogordoa4314 жыл бұрын
Justo lo que necesitaba saber, yo estaba pensando en una batería de teléfono móvil
@jomerescobar30584 жыл бұрын
Tadeo me podes explicar de que trata el video por favor
@anthraxzone Жыл бұрын
@@jomerescobar3058 le cambio la batería por una de laptop, pero con ello perdió el ipxx que tenía la jbl go, creo que era ip67 Sinceramente preferiría como dice el 1er comentario poner una batería de teléfono y en su caso agregaría una power Bank para mantenerla de fábrica