JCB tele-truck king pins change on rear!!! Over heating struggle!! right tools for the job🧐

JCB tele-truck king pins and bearings change!, having the right tool for the job struggle! Shovel, lorry, forklift over heating,
Professional Struggler Merch here.
www.profession...
Professional Struggler website here.
www.profession...
Dont forget to follow on FaceBook
/ professionalstruggler
All Music used in videos is copyright free and from Epidemic Sounds
get your free 30 day trial here
www.epidemicso...
LC Wilderness KZbin channel ( Help this Guy!)
www.youtube.co...
Thanks for watching everybody!
Please Like, Subscribe and don’t forget to share!
Strugglers post box
PO Box 11142
Newark
NG249RD

[@graemewhite5029]

Get yourself an air powered die grinder and some carbide burrs for getting those bearings out Chris and an air chisel with a blunted chisel is great for rattling stuff out, works great if you have seized brake nipples too, just tickle around the caliper where the nipple is fitted and if you have a spare nipple, rattle down on the top of the old nipple, you'll soon shift it.

[@dieselhatz4247]

Never met a thing that hasn’t unstuck after the air hammer has had a go, surprised Chris doesn’t have an old school one by CP, Made in England.

[@TheReptigon]

The struggle was real on this one Chris but you got there eventually. Great content matey!!

[@Professional-struggler]

Thanks mate 👍🤠

[@makg4655]

IF SCOTTIES YARD CARRIED OUT PROPPER WEELKY CHECKS & maintenance the plant would be way more efficient . Mind u on the flip side it would do the Struggler out a job 😂😂😂😂@@Professional-struggler

[@markmawson1]

Chris when you bought them parts at JCB and he give you that free tub of grease (should of got a refund and then re-bought them) then you should of bought the parts upto £100 then done that for the rest of the parts and you would have ended up with 5 tubs of boom grease........OWT FOR NOWT lol A 9" disc on a 4½" grinder is dodgy at best because the max RPM on the 9" disc is a lot slower than the 4½" discs max RPM so your lucky it never exploded being over sped. You need a welder generator for site work so you can run a bead of weld around that outer bearing race to shrink it and then it would just fall out.

[@johnwelburn9966]

Great content Chris you really earned every penny

[@user-rw2um8ro2p]

Great video Chris by jaysus that was some struggle 😂

[@chox2001]

If you carry a small mig or stick welder you could get the bearing races out by weld a bolt either side of the race and jack the race out. Chisel gun is a good tool to add to your van also.

[@kevin-the-carrot]

Brilliant video content as always.Blimey the struggle is for ever real.woop woop.

[@jaybe3bailey587]

Having one them days mate 😅

[@sam-bee7]

Hey chris. Ive worked on a lot of volvo loaders so Just want to give you a tip. I saw you were blowing out the AC condenser with it still latched in its resting position. To make cleaning the rad and the condenser much easier, there is a latch on the right side of the machine. If you pull the latch down and pull on the condenser it will slide out into its service position and make it much easier to blow the condenser in reverse flow and give better access to the rad. Hope this helps.

[@terryatkinson899]

Top tip 🤗👍🇮🇪

[@johnboy2984]

Hi Chris. That was a struggle mate. But you got there in the end like you always do. Have a good weekend 👍

[@davidgirvan6007]

There’s an ad on your video for “Thomas House Executive Lounge”. 🤔 Just what a struggler would need. WTF 😹😹

[@makg4655]

IF SCOTTIES YARD CARRIED OUT PROPPER WEELKY CHECKS & maintenance the plant would be way more efficient . Mind u on the flip side it would do the Struggler out a job 😂😂😂😂

[@andyclark1426]

My arse was twitching with thon easy out, waiting on the “ting” when it breaks, also with thon bearing races, can’t be tight when it’s a liquid 😂😂😂

[@Professional-struggler]

😂😂 always easier in liquid form 😂

[@stevenkerry3101]

with bearings like that in a blind hole if you run a bead of weld around the race it shrinks the bearing and makes it easier to remove .

[@Atty1958]

Weld the bearing race that usually works. Then give it a whack.

[@davidgirvan6007]

That looks a fkin helicopter 😹😹

[@billabong9215]

Never put a big disc in a small grinder. Small grinders run like 2 to 30 times faster than big grinders.

[@MrZimmaframe]

I just wish you had an air Chris, takes the work out of swinging a hammer on smaller stuff like this.

[@richardmottram9838]

What done hand

[@wayneyard4300]

Love watching your videos Chris , thought it was just me God hated and wanted to bust my balls everyday 😊😊😊

[@keithwestwood1718]

fuck me chris that was a propa struggle wor it, great work tho woop woop👍💪

[@GoingOn-dx6fk]

Big shotter 🤣🤣🤣🤣 I know what he means

[@fillyg89]

That bridge not worth it prob don’t earn the person wages I’m Sure it was 20p the other year

[@stepho9999]

🤣🤣🤣talk about making life hard for yourself ,are you sure you are a fitter ? ///Entertaining videos though

[@petewilliams5517]

Rite Chris you should get an air chisel for your compressor mate make life a lot easier or an sds drill with chisel bits great video

[@chrisburr7929]

I’m sat here watching this just crying out for him to suddenly go “ah I know what, I’ll get the air chisel out” 😂

[@keithianspencer2036]

If you need to get an outer bearing race out of its housing, put a bead of weld around the inside of the race and when it cools the race will drop out. Hey presto!

[@richardlaw5737]

I was thinking that lol

[@RDWGstudios]

Saw someone do this for the first time the other day...I was speechless, so much easier than trying to beat it out.

[@dylanwilliams2954]

Going to say get the welder out, 6 days too late though 😟

[@msleuropeanltd4477]

You can’t beat the old Indian tricks!

[@184BHP]

You need to invest in an a under carriage water broom to do all those jobs saves you getting covered in 💩 like mister mingle or Ryobi saves you having to go under

[@peterwebster9381]

Get yourself a sealy LH drill bit set shit at drilling holes but great for removing studs

[@oconnellsfarm811]

What a day lad i weld around bearing shell heat it up then one slap it explode 😂 that was torture to get done the fosters was well earned

[@matthewharmer1656]

I like the bald tyres on the jcb, that disc on the wrong grinder is an accident waiting to happen..stick welder can weld to outer race,then they are easier to crack. Or even carry a miniature oxy bottle set???.

[@jerrypruden887]

That Stuart was a generous man! Like to see him again

[@Giles4me]

It's just a f***ing struggle lots of love from the IoM

[@RalfyCustoms]

The struggle is real Chris, the struggle is real, what you done at your wrist man? And you rang me whilst I was away for the weekend lol, I'll bel you Tuesday cocker

[@stuartpurves9220]

Glad the Jacks are getting some use 😊

[@DaveGreeneramblingcarpenter]

Just what I need, a cheery struggler video 😂 Im on a contract in the most northerly Shetland island, Unst, 10 degrees today and no ferries to the mainland on my day off, ffs, Another week of eating offal, Such is the life of a rambling struggling Irish carpenter 😂 time to be heading south me thinks, Dreaming of mcdonald's double quarter pounder

[@harryharker9564]

I don't know how you manage to do these jobs in the open in all weathers with limited tools but you just get on with it and get it done .Great stuff Chris

[@richardfowler9901]

All fitters works like that years back

[@joepacheco4038]

After awhile you learn to make due, the less equipment you have to work with the more you learn to improvise. Repaired forklifts 40+ years in the field rain,snow and sunny days

[@125sm3]

Struggle is real, currently recovering from heart surgery. Keep up the great work 💪.

[@callumdurham7777]

Balls of steel Chris using that grinder with a 9 inch dish😂😂😂👍

[@johnmchardy4502]

Cant believe you even tried to get the bearing shell out without a welder that's the proven way everyone does it with plenty power through the welder to roast them up

[@matthewsanderson9173]

And there was me thinking at the sight of the king pin only been 2 inch long and attached to the to the caps it was a brilliant design. Then behold a tapered bearing race inside a blind hole. My favoured method of getting a tapered bearing race out is to run a bead of weld inside the race and as it cools it shrinks the race making it not far off fall out. But in your absence of a welder Chris you should have reverted back to the tried and tested method of swearing for hour on end at it and i am afraid Chris i did not hear anywhere near enough swearing in the build up to the bottles

[@ammo4184]

You poor bugger Chris, that was a tough bugger. I'm frustrated for you with that arm trouble, been there, not fun. Glad you got the package 👍🏻

[@ManxAndy]

Afternoon Chris ……as ever, the struggle was real……that Feckin bearing cap on the F**k truck….😂😂😂👍👌😜🇮🇲

[@Professional-struggler]

Load of old sh*t mate 😂😂

[@haydenbretton2990]

Chris, after jet washing the underside of the Forklift Truck you resembled a "Master Piece", a "Picasso painting", "Bloody Good Job".

[@silastetley9643]

Chris quick thought for that bolt, use COLD SHOCK! Get a can of plumbing pipe freezer of the van! Get yourself a set of bearing pullers, painful watching that was lad.

[@PAYNEKILLER..]

You need an air Chisel buddy, save a lot of "faffing about" 😂

[@garysides636]

Hi Chris ..... Wow mate I felt for you with that hammer and chisel.......would a SDS do that easier ? "Kids of today" ....made me laugh ..and you're right re money to burn on stuff... 9" disc on 4.5" boom 💥,.... Wow.....seen far worse Chris just not recorded!! I love your honesty mate 😉 and the struggle is REAL! I've not laughed out loud for ages mate... Whoop whoop 🤯 Laters ! Be safe , be kind G 🦉

[@kristoffscuba5466]

Crazy to think you do this kind of work without a stick welder and an air hammer. Those things are so cheap it must surely make sense to get them? I work on tractors and the stick welder and air hammer are items I reach for before I go for the spanners. 😂😂 That big grinding disc on that 4 1/2 grinder was legit terrifying. 😅.

[@stevencoyne4971]

Bloody Hell Chris ,Look After That Arm Mate ,👍👍👍🫢🫢😬😬😬

[@spudhauler]

I'll bet your suffering repetitive strain on your arm with hammering just ask any old joiner. Sorry to say it takes awhile to calm down.

[@bryansilcox9590]

You need to invest in a few new tools to help the Struggle. If you have the right tools makes the job easier and a pleasure to do & earn £££££££ quicker

[@timleeton7114]

The best way to remove them races is a spot of weld it puts a little bit of heat into it and then use a long pry bar they always come straight out done loads from fastracs to teltruk. Snap on sel a cheisel and you just go for it big time with lump hammer and the trunnions pop straight out. I've worked on JCB agriculture and construction equipment for past 8 years

[@pw6211]

Iv had a little air chisel on the shelf for bloody years not having air .I Gave it away last week . Recon you could have used somthing the same .saves a struggle .with struggling bandaged hand .

[@larkehoe6716]

as said in other comments chris, air hammer, got one for removing bushing bolts, honestly its noisey as heck but saves serious hammering... and swearing...hahahahaha

[@kentdaniel6]

I appreciate you’re a truck mechanic but these lorry drivers letting there lorry over heat as they don’t want to pressure wash it, is ridiculous I’m forever getting under the one the I drive to remove dust and dirt Surly jts basic maintenance But then I guess it ain’t there’s so who cares

[@ianspaintpot]

the reason why it took so long to get through that king pin is the battery grinders are crap no power. if it was me i would have a 240 volt one and a genni on my van the genni would be good if no power avalible

[@richard3004]

Agree there, I carry one for cutting cable tray etc and it’s great but for cutting bolts or heavy lumps need 240.. something with constant grunt not battery that die after a bit. Mate of mine is a steel fabricator says the same, battery for sites where he may need to tweak something then 240 in workshop.

[@jimmyquinn9639]

What a 💩job and another good video Chris 🚛🚚🚌⭐️⭐️⭐️👍👍👍👏👏🍻

[@jamieclarke9831]

Bloody prices these manufacturers charge for genuine parts have a great bank holiday Chris all the best Jamie

[@RichGilbert86]

Hey buddy, hope you're well, are you off to the AEC rally tomorrow? i know you mentioned it in one of your videos, would be cool to say hello if you are.

[@garybrown5500]

Get yourself some oxy propane gear on the van Chris. It's so much more afordable now you can get rent free bottles from most motor factors. You're right theres nothing easy about eazi outs!

[@an04ker]

Watched 5 minutes. Too much swearing. Bye.

[@andychumley3680]

What a struggle, if its broke you can fix it with limited tools, what a struggler you are 😊 wooo wooo😂👍

[@richard3004]

Definitely worth getting small inverter stick welder, can be used to run round bearings then shrink and remove, weld bar or nut on broken bolts etc or repairs, MIG is good but bigger set up and tricky if windy, small inverter stick and pack off 3.2 rods for couple of hundred quid, works in all weather, just keep gloves dry. Regarding knackers boots have a look at army surplus, past few years iv been using army surplus Altberg Defender boots, give them a wax now and again and they have lasted a working environment (industrial electrician) great as long as where you go don’t demand steel toes, however they are still a tough boot, very comfy too, same for overalls etc, iv given up buying new workwear after last time a decent pair of trousers was £100! For work.. knowing they get knackered quick thought not paying that.

[@onlygazza]

That’s the f#cking way with the grinding 😎✊

[@thecountryman7028]

if ye spend over 100 pound ye get some Bellend grease, You spent 500 so you should have got 5 tubs lol.

[@adebat13]

No Struggle bus is complete without a tub of Boom grease😉

[@Professional-struggler]

😂😂👌 still haven’t used it 😂

[@grantsmith6977]

Hey Chris what's the part number for those Jack's?

[@richardlaw5737]

Look out on about Wednesday Chris, something coming your way in the post fella

[@spudhauler]

Didn't know iveco made boots. 🤔

[@spudhauler]

There proper Struggle boots 😂😂

[@lynjames4306]

Why don't you use the Torque amplifier on the wheel nuts 😅 with your arm taped up 😮

[@rodharris2915]

Did you get 5 free boom grease??after spending that much 🤣

[@chmartin444]

Never seen anyone with as much saliva in my life. You want to try swallowing now and then.

[@philglover2973]

Aup Chris that's one big struggle buddy have a great weekend 🍺🍺🤫💪💪

[@garyjordan9679]

You need to get yourself an air chisel Chris From Gary here from Ireland

[@bostedtap8399]

Boom OR Crust, guessing its just a waterproof grease ? Great work and video Chris, thanks for sharing

[@gc19901]

a jcb dealer near me recommended waxoyl for anybody wanting a cheaper boom grease

[@dannycrooks8462]

Feck thought you said bump grease thought you were on the budlight

[@JonNewstead-cy4qw]

Bloody king pins dont matter wot there on all ways a arse or struggle keep up the good work JB the boat struggler 👍👍

[@davidsanders2806]

Full-time job at Scottys yard Chris

[@George-12]

If you put a bead of weld round the race and let it cool it'll come out with a pry bar, do it all the time 🤘

[@Law_Abiding_Citizen_ok]

Seeing you got a compressor….why no air chisel?

[@xfilesinc.1208]

So did u get 6 tubs of"boom grease"?? 🇬🇧🇬🇧

[@givman2004]

You need a heavy air hammer and a smaller air die grinder. 1 inch cutting wheel eats those races

[@nickhill3362]

I arc weld round the race a few times then let them cool down and they come out ok Chris might help if your near a welder on another job mate

[@petertrevena804]

Gday Chris, and that was a struggle. If you want the job done right, you need the tools to do it; a struggle when you do not have what you require😘🤗😊👍

[@tony-yp6qk]

Another great video has always chris and family 👍

[@Matthew2022]

Loved watching this video of you doing a lot of jobs at the yard Chris and how is your little crops doing in your little farm you have and hope your arm is doing okay mate and can’t wait to see the next episode

[@DaveJMcGarry]

Used to weld those external rings in situ. Pop right out after shrinking.

[@teeslunk]

I hope u charge for them little jobs. They get a to do.

[@conorcousins27]

Will somebody please sponsor him an air chisel

[@TMGUKLTD]

Top video bud keep struggling

[@grahamshipley7251]

Have just found your channel and must say you deserve your own tv show have just watched the one with midas the robot in can I ask how much it sold for

[@Professional-struggler]

Cheers Graham 😊 thanks mate, yeah it sold for £1200 but the bloke has never picked it up and he’s paid for it ages ago 😂 god know mate must have to much £

[@notsohairybiker]

Chris, I have a set of left cut twist drills when I'm on stuck bolts. Most of the time the heating of the stuck bolt due to the drilling, will come undone as the drill bites.

[@Professional-struggler]

Yeah I’ve herd about them mate. Never used them but might be a good purchase👍

[@hgvtechnician]

Gwane Pal

[@dantheman7370]

Fair play to you lad, you’re a hardy bugger 👌

[@dean4817]

Geese.must be time for some new tyre's mate

[@malcelwell7209]

Omg Chris you earned your pay there mate it made me sweat 😓 😂💪

[@thomas24469]

dam tyres, there ever only flat at the bottom !

[@rolandnewbold5339]

Great video man. Rat10

[@james1c763]

The big struggle was real on this one Chris but you got there eventually. Great content matey!!

[@derekgavin1050]

Is scottys a recycling centre?