Great Budget Gas Spring Dual Monitor Arm - NB North Bayou F160 | Setup Video

[@bebo7be4]

I just bought one of these. REVIEW CORRECTION ** you can get full range of motion backwards on the bottom arms by loosing the bolt underneath with Allen key. It will allow you to put them both arms right next to each other giving you more desk space

[@dexterys7305]

Hi there, sorry I can’t find the information elsewhere, may I know if you are able to do a stacking of 24” monitors vertically ?

[@gameotic1]

@@dexterys7305 sure you can. Both vertical & both horizontal. One vertical and one horizontal. It's very flexible.

[@GatherGlam]

With NB 160F you will not be able to do this as mentioned in the video. Thanks

[@Benry1984]

To avoid the wall issue for some screen sizes you can just set the clamp in an offset position and have one monitor arm effectively folded back over itself, and the other fully extended (if that makes sense). Then you just swivel at the vesa mount 90 degrees and all arms should be running the length of the wall.

[@ChefJeremy2001]

I always see people complaining about this as well... I had the same thought, extend one arm completely and fold the other. I have never tried it. Do you have personal experience with that?

[@grovernator_ss9626]

just ordered mine and was a bit worried about losing some desk space but I thought I could do something like that but he didn’t show it in the vid. Thx for clearing that up 👍

[@MikeDaveYapOfficial]

Great thing that I have found your video before I'll do my own review of the new version of the F160. 2 things that I have noticed when I opened the box is the ease of cable management and a simpler quick C-clamp design

[@manitot]

i love your comprehensive reviews. the timecodes are incredibly useful.

[@drylunch8462]

Great video, thanks for posting. I got one of these the other day and they are really good, especially for the price. I screwed a small block of 2x4 wood to the back of my desk then clamped it to that to free up a bit more desk space.

[@HamedEmine]

What this review doesn't tell you, YES, you can put two 27" monitors horizontally and still have a considerable height room/space underneath. You can get them close together by folding the arms a bit, or have the arms completely extended against the wall and have a large gap in between while the monitors are flush against the wall. The maneuverability of the arms is insane! But they don't allow a vertical layout of the monitors (on top of each other) The base houses a room for two USB ports, you can put your USB extenders in there and use it regardless of the ports layout (have the cables come out completely), just make sure the cover of the USB room is completely flush with the base when you screw it back on (underneath the base)

[@zeusexmachina3991]

That's how you make a review. Very detailed and answers all of my questions. Liked.

[@vital123ish]

VERY HELPFUL! ITs the only source online(srs) that has all the angles and cameras showing it all around which helps to figure out if it is good or not for our setup. I almost bought a Gas one but after this video which explained that i cant have it if my table is near my wall so ill get a regular one, thanks!

[@jasbatalla5822]

I bought one of these for my streaming and I dont regret it. your review convinced me to get it and I hope you do more. I subbed and liked.

[@jcunboxing]

Thanks for the encouragement! Glad it helped you and that you're loving the monitor arms :)

[@jomarechua8990]

can i rotate this in portrait sir? thanks in advanced planning this today to buy

[@h.p.734]

Thanks for the very detailed review. I think this is the best one on youtube so far.

[@laidbackgaming8789]

Great video! Warning to Samsung Odyssey G7 users. Like James mentioned, there is no tension adjustment for tilt.. The monitor keeps tilting down and it's very annoying.

[@GoodNightAt6]

ooo just when I thought I found the one.

[@renansk8flip]

I dont know if they released a revision of the support, but mine have the adjustment for it, have no problem using the G7

[@mahidG]

After months of deciding i bought this f160 for my dual monitor, i have alienware monitor and a benq. Alienware stand are pretty wide and takes up the space for my mousepad lol. Thank you for the review, very informative :)

[@mahidG]

@Uzayr Moosa still using them to this day,

[@mahidG]

@Uzayr Moosa i use 140x60

[@babyeater350]

I fell like the only draw back to having desk mounted arms, is the wobble. I have a north bayou wall mounted arm for my 32" monitor and i have to say i love it because of the zero screen wobble if i bump the desk.

[@kreesod]

I have a NB 80 desk mounted with the clamp, and the wobble is none for a 27" display, I'd say NB makes a great job in this regard and had nailed it comparing to their previous models

[@samsantos4509]

Why mine have too much wobble

[@squeekymouse8802]

@@samsantos4509 tighten the tension rod further. That will help take out much of the wobble.

[@Prashanth2011]

You have almost covered every detail, Great job..!

[@kappy9278]

One of the best reviews ive ever seen on KZbin, im shocked.

[@christopherphan2930]

Very helpful. Looking to get these now, look forward to future reviews. Keep it up James !!

[@andrefjoao1]

I prefer two single arms, instead of doble, because I can sit right in front one of the monitors e put the other beside. The dual arm doesn't allows that. Thanks again from Brazil.

[@phucvu9770]

Thank you very much, I found this video while looking for a way to align my 2 monitors close to each other, turns out I placed my desk too close to the wall so I can’t bend the arm to an “M” shape like that ❤

[@jcunboxing]

Glad it helped!

[@fafnir9550]

QUALITY CONTENT

[@aZnGanar]

Nice review! Would have been great if you had the max weight/size monitor to test on it.

[@veeci2468]

Good day.. New subscriber here from the Philippines.. I really appreciate your detailed and honest review Sir.. This kind of your review we're looking for and it really helps.. I'll go watch for your other videos.. Thanks and more power..

[@jcunboxing]

Thanks so much!

[@veeci2468]

@@jcunboxing You're welcome Sir..

[@youNOXz]

This guy deserves a subscribe.

[@zainalrahmani5975]

im not sure if its there on the f160 but on the f180 I thought didnt have tilt adjustment either until I fiddled around with it. Turns out it has two half-circle plastic covers that cover the screw, just squeeze and pull, it should pop right off. Again, im not sure if this is only with the f180, but everything else is exactly the same. hope that helps :)

[@JoeWintergreen]

Hey thanks man! Ya just saved my bacon

[@GehMemories]

Thank you

[@faintsherin4468]

7:03 You pussied out bruh! Bringing them guns lmao

[@Villarruel117]

Thanks for the video. I wanted to see how they’d fit against a wall. Looks like it takes too much room

[@bella-ql6om]

ur camera set up for ur review so good

[@neuk3r]

Damn! This is the neatest review for an item so far. Very neat!

[@fareshalima1265]

you've convinced me to buy this

[@progga7326]

Such a great review. Thanks, that video help a lot in my buying decision!

[@picruise6001]

Thanks for pointing out the space it takes if you have a table that is up against a wall. This kind of arms is for desks with a lot of space. I've got a small desk and good thing I watched this before I could have bought this one.

[@margheritabettin6130]

I have the same problem, so for a small desk what arm did you buy?

[@JoannaBalasbas]

Same issue here with having a small desk up against a wall. Could you guys share any solution you used since?

[@rahulranjansingh1933]

Installation description is excellent but no details were given about the fixing the arm to the desired position. I bought the same model but the arm could not be fixed at desired position and it used to get back to its fully extended position. Its a big setback

[@jcunboxing]

Sounds like you need to adjust the tension on the arms. And doublcheck the Wright and size of the monitor is compatible.

Here in Brazil this brand is not very famous, but it is at a great price. Thanks for Review o/

[@Nexifyy]

Thank you my friend just ordered this today super excited :)

[@DGRWPF]

in case it helps somebody: if you have a very deep desk or you like to sit close to the monitor i would buy 2 single arm stands, rather than the dual arm stand.

[@StripteaserGaming]

Great video dude! Nice and detailed and not too lengthy :) subscribed

[@jcunboxing]

Thanks!

[@benw1046]

Great video! Does this come with monitor screws? Mine don't have them preinstalled into the monitor

[@Sajesembang]

what model dell monitor u use?

[@jcunboxing]

P2419H

[@i3looi2]

Thanks for the video. V informative. I realized this is not for me, since the wall being too close to desk. I do love the cable management solution though ..

[@jcunboxing]

Glad it was helpful!

[@rozacklol]

really good review. keep it up bro, love the content

[@miloszivkovic6256]

Tension adjustment for the tilt is on the side of the tilt mechanism.

[@JeranL]

Hey James, Nice review! Would like to ask if you could arrange the monitors on top of each other? Is this possible with this mount?

[@jcunboxing]

Hi Jeran, nah it's bit possible with this one. I do have a monitor arm review of the AVLT on my channel that does stacking. Check it out!

[@salutmoicestmathieu4185]

Thank youfor the video !! ,you also convicted me to buy this one

[@roryvanberkel4139]

Hey there, I'm thinking of picking one of these up for myself, great review by the way. About the cableways, for one of my monitors I need to run DP cable, 1 HDMI cable and the power cord. Do you think from your experience that this will fit in the cableway? 3 total cables, since you said 4 was too many.

[@jcunboxing]

Probably not....

[@roryvanberkel4139]

@@jcunboxing thanks for getting back to me :D

[@ambigus7]

I think you are reading my mind! Because yesterday I bought a NB North Bayou F80 for the monitor i will pick :)

[@kreesod]

F80 is a superb model, got mine yesterday. I've noticed though that F80 can come with 2 different clamps, one being screw-less and the other the common one

[@yvesbondoc2894]

Hi James, nice review and very helpful. I'm curious since Obviously if you have a wall behind this arms take so much space, would it be possible if I just like hire a carpenter, or like drill a hole in my table to have a good adjustment? What do you think?

[@jcunboxing]

Yea it's definitely possible to drill a hole in the desk to mount it further into the table. It comes with the necessary mounting options.

[@LoveBladez]

AMAZING REVIEW! i'm wondering if with this one F160 (or the other one H180) can i fit two monitors next to each other? a 34" curve ultrawide being my main monitor (horizontal) and a 24" flat (vertical) without having issues of weight and space? tysm!

[@sebastianflorez8867]

bro i got the same question, did you get the arm? please share your experience. I got the same set of monitors

[@LoveBladez]

@@sebastianflorez8867 hell yeah bro, I did not buy this one but the 180, it have been working amazingly, I haven’t got any issues in weight/space aspects in my desk, but in my case I cannot move the ultrawide too much, just back and front a little bit (bc it’s too big ofc) but I don’t need it tbh lol so your good if u just going to be moving the small one, it gives you a lot of space and safety feeling, for last, mounting it w the 2 monitors it’s a pain in the ass btw 💀 you need 2 ppl at least

[@osheedrink]

@@LoveBladez Do you use 34 and 24 monitors with F180. I think about buying this arm, but i`m not sure completely.

[@LoveBladez]

@@osheedrink yessir, the Gigabyte G34WQC ultrawide and a normal 24" LG

[@zwafiuddin]

Thank you brother./.. so helpful

[@laraapolonio7217]

Hello! Is it possible to remove one segment of an arm? perhaps only the one with the 'pump' can be directly put into the clamp?

[@DreadFool1177]

Just bought one. This may be a 2021 model because the part where you unscrew the grips is not present with mine. It's more like a hook like mechanism and then i tighten the grips to the table.

[@benzoneofficial]

I wished you showed how high you can adjust those monitors. Im planning to get one of this for my 3 monitor setup. 1 bottom, 2 top

[@SuperD00D]

They’re supposed to be able to put a 27” over another one... but it’s just for dual monitors, this particular one, plus many other brands that are exactly the same

[@dominiquecruz7]

I am 8 months too late but if you want that kind of setup it’s better if you buy NB H180😊

[@patikiah]

Great review, just placed an order for these :)

[@nandenana99]

Amazing video! Thank you so much

[@shawnwong388]

Great content! I plan to buy this ...but now have to give up as my table back is the wall...so if I use this mount.....the monitor will be quite inwards of the table (60CM deep only).....Not sure if there is any other option that it wont take to much back space of arm...

[@xhuxhoo90]

Same problen here. What did you do?

[@NguyenDown]

Very detail. Thank you

[@PasserbyP]

Do u have any recommendations for budget stacked arms?

[@MegaJonSA]

Many thanks for the informative video!

[@KrikitKaos]

Also, do not attempt to use nail polish remover to take off the glue left behind if you remove the yellow NB stickers. That stuff straight up melts this plastic. Stick to Goo Gone.

[@x4v]

Thanks for the tip, I want to remove the logo because its quite ugly. Did you find any other way to remove it?

[@KrikitKaos]

@@x4v The logo sticker peeled off pretty easily. The adhesive residue left behind came off with Goo Gone.

[@x4v]

@@KrikitKaos awesome thank you. After having this monitor arm for over a year do you think its good? Or is there anything i should know about it?

[@KrikitKaos]

@@x4v I used it for a good chunk of time and never had any issues. The only thing was that if the desk you attach it to is not completely stable, any movement will transfer to the arm in a slightly exaggerated way. Other than that, it was great. I stopped using it when I replaced my monitors and the new ones had stands that were sufficiently height adjustable for me.

[@x4v]

@@KrikitKaos awesome, thank you! looking forward to it arriving next week

[@ziq1450]

Thanks man this saved me

[@roland3698]

Great content! Thank you for doing this. I share a desk with my cofounder and I want to have a setup like yours, but since we sit opposite to each other, can the arm make the monitor stand with its backs facing each other? I'm planning to setup the arm on the short end of a rectangular desk.

[@jcunboxing]

If I think I understand what you're saying, this isn't the best one to do that since there is a pivot limit as I show in the video.

[@roland3698]

@@jcunboxing Yeah, I opted for two F80s instead. Thank you, James! Love your content!

[@erryzuhairi1129]

Great video! Love it

[@justinz.4069]

What monitor did you use in this video? I like the bezel-less sides of the monitor to be used as a second monitor

[@jcunboxing]

P2419H I'm pretty sure.

[@chamoddilshan_]

Hello, are these 27-inch monitors? And what's the width of your desk?

[@jcunboxing]

24" and width was 150cm

[@cleof1503]

im looking for one for my monitor and my Huion drawing display. Think this may be the one.

[@HaneezHaroon]

Desk clearance is challenging. I need a wider desk for this.

[@vianmaro6732]

Do you recommend this mount if my desk is close to a wall? I cannot afford to make my desk farther the wall as I have limited space in room.

[@bamzoce3485]

Hey a quick question, does the initial package come with screws for the monitor? One of my monitors don't have inbuilt screws for the monitor mount! Thanks~

[@haziqhalim4]

Damn, nice video!

[@bohtezlohtez9474]

Excellent review

[@jorgeaugustovarongaona4668]

Great video, you should make one with the laptop-monitor setup

[@chinaustria]

Can you also do a review of the Huanuo Dual Monitor Stands

[@andriesvanderwalt3514]

Great content! Would you recommend this for someone who has a 29 inch ultra wide, and 24 inch setup?

[@jcunboxing]

Nope, you ultrawide probably won't fit

[@andriesvanderwalt3514]

@@jcunboxing Thanks!

[@razorbacks9034]

12:52, you actually do have a tension adjustment for the tilt.

[@luderpt]

True, I can confirm that.

[@stevensonc.p.4369]

Excelent Review, the best.

[@austinco3718]

Hi!! I'm looking to get these but can you position the monitors on top of each other? I'm planning to mount them on a wall by building a mini shelf that I can clamp onto. This will make them clamp higher than clamping it to the table. Your answer will help me a lot! Thanks!

[@jcunboxing]

You can easily just buy a wall mountable monitor arm bracket. Would probably suite your needs a lot better. I would be very cautious/advice against clamping this on a shelf as it's not stable/might rip off the wall. Always better to mount the arm directly onto the wall itself. These ones also won't allow you to stack. There are monitor arms dedicated for stacking.

[@DECM.]

was looking to buy a dual monitor mount and im choosing between the f160 and h160. theyre the same price, which one do you think is better?

[@solaryard5351]

I have an LG ultrawide and a 27'' monitor. The LG is a LG 25UM58-P. will both screens fit on this stand ?

[@mahirislam9980]

Was this on a particle board? If so, is the mount bending the table right now?

[@mynameizvin]

good review thank you

[@xvnbm]

14:02 what happened there? The robot ran out of batteries?

[@ChessBoxin]

Is it better to get 1 dual monitor arm or 2 single monitor arms? I have a 240hz Benq and a 144hz Asus both preferred to be horizontal and one is straight on mean while the other is at an angle on my right (I can make it left if needed).

[@limerunner]

Can it be arranged in vertical manner not like the horizontal that you usually do?

[@OchitosBuritos]

Just people know, latest updated version, cable management no longer involves anything to screw, much easier, and the added monitor pivot adjustment. it's a great deal

[@djkid4lyfe]

whats the name?

[@tyroneounce3713]

How far is it from the back plate to the end of those clamps just so i know how much space you need to clamp it on the underside of the desk. I read that the diameter of the clamps is 45mm and the gap between the clamp and back plate is 10mm making that total distance from the back plate to the end of the clap 55mm. Meaning i would need 55mm of space on the underside of the desk to make sure that the clamp and back plate are secured properly. Could you measure it for me just to make sure the 45mm and 55mm is right? thanks.

[@jcunboxing]

According to my rough measurements, it's about 6-7cm into the desk from the edge.

[@3p1ks]

8:10 The desk tilting was kinda scary there.

[@iitzluiiz]

very helpful!

[@KrystianMichel]

Was that 2x24" or 2x27" setup? Im looking for monitor arm.

[@bfjrd]

nice review/ thanks!

[@Miguel-iu5lp]

Hi! how are the arms holdin up after a few months of use? are any of the monitors tilting or are they still as sturdy like when you first set it up? thanks!!

[@jcunboxing]

This setup went to my dad and he doesn't really move them much at all, but they have been rock solid and haven't sagged in any way. I sometimes adjust it when I use his computer and it's easy to do.

[@Miguel-iu5lp]

@@jcunboxing thanks so much for the info! I'm getting myself a pair 'cause of this video. :)

[@abdulla9790]

thanks man.. keep it up and here’s a sub

[@Max-dn1kz]

really helpful, Thanks alot

[@BenL1242]

What about the h160 as compared to this? Which would u prefer?

[@kIMOU07]

BRO THIS STAND SUPPORT THIS? Ecran Gamer - AOC 24G2SE 23.8" AdaptiveSync 1MS / 165Hz

[@jcunboxing]

Should be okay, just make sure you check the weight limits on the montiro and the stand.

[@edwinchandilao4926]

Does it support most latest type of monitors? New to PCs setups

[@Vein]

great video

[@skyds_]

I have a four-inches thick table, will the clamp still work on that or do the grommet installation instead?

[@m4rcohh]

is this the ikea linnmon desk? if so do you have a piece of wood in between the desk and the clamp?

[@moenryan4782]

9:34 that monitor smash though h

[@KingsmanKnight]

This one takes too much space of your desk. I bought these thinking they would solve my problem of desk space but instead it got worse. But, i was able to sell them and i instead got 2 NB H100, they are the same brand just seperate, and instead of installing them in the middle of the desk, you install them both at the end of the desk then turn the screens inside together and you practically make them flush to the wall.

[@yveskoubi8723]

bonjour James très bien votre vidéo top juste un petite réflexion ,comme je suis nul en anglais je vais essayer de voir avec les sous titre en français pour le montage du produit à bientot