JD 567 Pickup Repair

[@kmilton1593]

I only have 14,000 bales on my 567 JD baler and also have some pick-up teeth break every year, and also get major plug-ups on the same spots (need to use vise-grip pliers to pull out the hay initially because the plug-ups are so dense). In my case i take the baler in to John Deere dealership for their "green-line checkup" and they have milked me about $27,000 so far over the years for maintenance!!

[@dkeota]

JD makes a square tined pickup tooth now that won't break as easily.

[@johnowen6507]

I've found that our 566 eats up teeth too. I have yet to put in a Vermeer tooth. we're in the same boat with our Deere balers, not worth anything for trade in, so as long as they don't need anything major I guess we will just keep them around.

[@Live.Vibe.Lasers]

do you happen to know if the spring tines have the loop for the bolt that holds them down perpendicular or 90 degrees from the length of the tines? thinking of using them for a custom application. thanks!

[@byronusrey6827]

Has anyone tried the poly bands?

[@asmallcustomfarmer150]

The many shaft is come to bake right there, The teeth braking you need to pick your header off the ground. I bale 5000 bales a year I put about 10 teeth in a year you need your teeth just to run your teeth in the grass. I gess I will make video on it .

[@user-om8tg3ju1h]

Who sells spare parts for the John Deere press ? Let me know how to contact them

[@catfischer86]

Hey, I just had the same thing happen on my 567, how did the welded shaft hold up.

[@OldGlory1776]

Put up 2500 Bales with it last summer with the welded shaft, worked great. Although I did flip the shaft over when I went back together so that the power was being transferred to the unwelded side

[@catfischer86]

@@OldGlory1776 Well I welded her together and stabbed it in the opposite way, we will see how it holds up. I was in the same situation, 800$ shaft that was 2 days out with dry hay laying on the ground.

[@user-om8tg3ju1h]

Hello, help me I bought a press John Deere 550, and nimogu find who sells locks on the tape, please help me with whom I contact who sells them.

[@user-om8tg3ju1h]

Hello, write in which company you can buy bearings on the John Deere press ?

[@OldGlory1776]

What's a john Deere press?

[@user-om8tg3ju1h]

@@OldGlory1776 Don't you have the John Deere you were sorting out

[@OldGlory1776]

@@user-om8tg3ju1h the round baler? Yes. I buy parts through my john deere dealer

[@user-om8tg3ju1h]

@@OldGlory1776 Press I have John Deere 550 makes round rolls, you would not be able to contact your dealer can he tell you where to order spare parts for the press, sprocket bearings.

[@OldGlory1776]

@@user-om8tg3ju1h could try an online site like this www.abilenemachine.com/parts/john-deere/balers/