Thank you for taking the time to share your invaluable experience ❤
@torqingheads2 жыл бұрын
Ubermensch, the master race.
@Jay-sz5dt4 жыл бұрын
Glad ur safe! Awsome job on DIY
@luckgrip2522 жыл бұрын
Even if this video was not that much in-depth. It gave me an idea as to what to check and try out on friend's BMW whose passenger side mirror got destroyed and has hanging mirror on wires (did a tempo fix with zip ties without drilling any holes). Will take a look on how that one is built. As per insides, i believe that the inside components were made out of plastic, but i'll look that up when imma work on it. Wishin that all the necessary stuff is made out of metal and i could refurbish it to at least almost new. It's a base model F30 320d xDrive with M-packet interior.
@tropicalsurfmaster2 ай бұрын
Hey mate, Im having trouble reassebling the two halves of the mirror unit. Do you just push the fingers into the slot and rotate? If so, does it need a lot of downward pressure and does it click when its in place? Im really struggling amd dont want to apply more forae than i need in case i break it even more!
@thierryhimself27962 жыл бұрын
Thanks, it really helps figuring out how things are setup in there, as I'm planning on doing the Surround View retrofit
@JDCarsChannel2 жыл бұрын
Glad it helped! Good luck with the retrofit
@frankmontes9563 Жыл бұрын
I known been awhile, but when you fix bent part , did you Had to twist the part together to knock in place
@L-Noble.YT_Hi.Res-Soundminds4 жыл бұрын
I miss the e90!! Honestly I miss the e90 JD..👉E9😫
@JDCarsChannel4 жыл бұрын
Me too, me too :(
@Jdoug30518 күн бұрын
how df do you pop the circle out at bottom of mirror
@alvarocaravantes40452 жыл бұрын
Thanks for the tip!
@JDCarsChannel2 жыл бұрын
Hope it helps!
@aravmukherjee15704 жыл бұрын
What happened to the m sport steering wheel?
@samjwhang Жыл бұрын
Did you have a “driving assistance support reduced” message come out? And if so, did it go away afterwards?
@willwilliam4647 Жыл бұрын
I'm in the same boat
@bdawg23203 жыл бұрын
do you have a video of taking that whole assembly off?
@fhashemi9403 Жыл бұрын
What else did you used with the vice to bend back the metal bits? It's a very small area. Mine is bent similarly and the folding doesn't stop where it's supposed to. Thanks
@JDCarsChannel Жыл бұрын
I used a vice and vice grip pliers. A hammer (used carefully) can help too. It takes quite a few attempts to get it fully bent back into place. Best of luck to you!
@iixgamingpimpxii73102 жыл бұрын
How do you take out the circle bit underneath the mirror? And can you not take apart the mirror without disturbing the wiring?
@Jdoug30518 күн бұрын
did you figure it out
@Ju1cy_di4rrhea2 жыл бұрын
We got our right mirror damaged, and the BMW dealership told us that it costs $2300 to replace the unit
@JDCarsChannel2 жыл бұрын
Jeez! Very expensive estimate! Were you able to repair using the steps in this video?