Affordable LED Headlight Upgrade for Jeeps! // Budget Build PT. 5

[@douglasposton3652]

Great video; two additional tips, and this is for a '23 Gladiator Mojave: when pulling out the plastic pins & grommets that hold the grill in place, pull only the pin shaped piece up first, then remove the entire thing from the vehicle. I made the mistake of pulling the first one out from the grommet without raising the pin up, and it ruined that one. Second, after lifting the white safety switch/clip from the bulb plug, squeeze/push down the tab on the grey piece and that allows it to free from the headlight assembly. Noting that it is possible to install the new LEDs upside down, I tested it by attaching the headlights with two bulbs before I put the cap back on and re-assembled everything.

[@alfreddoumtaz215]

90 % of the lasfit or else complain on line for faillure day 3 or after 3 months is because people touched it. A simple finger print left grease that grease encrease the heat like a fier and burn the led cells. good video .. I did it yesterday its amazing since the gladiator stuck sucks badly lol

[@kevinvoyer5053]

Not only are they indexed, but some brands have the feature that allows you to twist the blade area, separately from the main body. The idea is to be sure the two sides of the blades have the illuminated sides to be facing side to side, that will allow the multiple aiming surfaces to send the illumination on the road where it’s needed and not blinding oncoming drivers.

[@riddle58]

The white glove is so you don’t touch the LED lights and get hand oil. Great video, very informative!

[@JDCarsChannel]

Good tip! Thanks!

[@reyesgarcia6563]

can u send numbers on lights , so i dont order the wrong ones please , headlamps and running lights

[@jettangeles2707]

make sure the led chips are clocked at 9 oclock and 3 oclock. i can tell from the first test that it isnt

[@apexbmx5852]

any complaints with these bulbs? Also, did the PC need to be flashed for any of your bulbs? I’ve heard there is LED light flash, but it could just be for the halo ring.

[@JDCarsChannel]

No complaints from us or the computer! Very happy overall.

[@jonathanacosta2207]

Are these numbers on the light bulb compatible with the gladiator 2020

[@katiecollins3974]

Have you done a video for the fog light LED swap out? I can't to find it.

[@JDCarsChannel]

I do not for the Gladiator :(

[@rickgonzales1219]

Hi Have you done a led swap on your fog lights and if so what led did you use. Thank you.