How To Delete Your Resonator // BURBLES FOR UNDER $30 (EASY)

◆ Stainless Steel Exhaust Clamp -- amzn.to/2Fm7F7t
◆ 18" x 3" ID Resonator Pipe -- amzn.to/2FoFQv0
◆ Exhaust Sealant -- amzn.to/31KqieU
Today on JD Cars we’ll be taking the first step in making the F30 louder! This resonator delete procedure is applicable to a number of vehicles, not just my BMW 335i. I’m not kidding when I say you can get this job done in half an hour. Just two cuts, a straight pipe, and some band clamps an you’re all set! I would highly recommend this if you’re looking to slightly enhance your exhaust note for a bit more sport sound. Thanks for watching! Please like and subscribe for more BMW content!
Watch QTP VALVED EXHAUST Video Here: • QTP Electric Exhaust C...
0:00 intro
01:13 exhaust rundown
01:34 parts & materials
02:56 cutting the exhaust
04:24 cutting pipe
05:00 installing pipe
07:23 first startup
07:47 driving test
---------------------------------------------------
🔥 JD Cars Site -- www.jd-cars.com
---------------------------------------------------
Veepeak OBD2 Bluetooth Scanner -- amzn.to/37y1o3K
---------------------------------------------------
Tools:
◆ Jack -- amzn.to/2KiPwbi
◆ Jack Stands -- amzn.to/2A37rzC
◆ Impact Wrench -- amzn.to/2FiQy3j
◆ Ratchet/Socket Set -- amzn.to/2BwHlFT
◆ Rigid Battery Charger -- amzn.to/31sXSWD
◆ Rigid 18V Battery -- amzn.to/2WAiwQF
◆ Rigid Gen5X Reciprocating Saw -- amzn.to/2WBElUZ
---------------------------------------------------
Instagram: @jd.cars
---------------------------------------------------
Facebook: / jdcarsautomotive
---------------------------------------------------
Camera Equipment
◆ Camera: Panasonic G85 Bundle -- amzn.to/2GsQPqa
◆ DJI Mavic Pro - Standard Package -- amzn.to/2RLPGOY
◆ DJI Mavic Pro - Fly More Package -- amzn.to/2D3YMyz
◆ Magnus VT-300 Video Tripod with Fluid Head -- amzn.to/2LiFojF
◆ GVM LED Camera Light -- amzn.to/2Qxzelz
◆ GVM Motorized Camera Slider -- amzn.to/2GgKpZF
-------------------------------------------------
♫ Music:
◆ Joakim Karud - I’ll Be There
◆ Joakim Karud - If I Could I’d
◆ Liam LRY - MMHHMM

[@optiononemarketing]

I dig how u left the 335 badging. Not trying to fool anyone into thinking it’s an M3. Well done, car looks and sounds great. All the best.

[@dritter7051]

but he removed the front bmw badge 😫

[@optiononemarketing]

David Rttr I saw that too. I jus figured he was changing it out with a blacked out one. I’m keeping an eye on that...

[@xtATiiKo]

If it was a 320i I bet he would remove them! Hahaha just kidding. I think is okay to remove badges as long as you dont add fake ones...

[@paradoxmight5512]

Option1 Marketing even if he removed the 335 badging it would be fine as long as he doesn’t add any fake badges my Friend.

[@optiononemarketing]

Paradox Might Absolutely!

[@Bombskwad92]

K I bought a lift, a portable bandsaw, a jigsaw and the resonator pipe and clamps. I'm waaaay past the $30 you promised in the title

[@matthewsummers1697]

Yeah right, me too! Plus my left shoe is missing now, wtf?

[@royramalingam5247]

Well u can rent tools and jack ur car up...

[@richardramos141]

Shoulda borrowed the tools instead..

[@chrisnotochris3325]

Welding it up is the way to go. Just my opinion. I weld all my exhaust on all my cars

[@gstpierre69]

By a hacksaw.

[@mgjamesfin7011]

I love how people are crying about all the tools this guy has. You can easily do this with a jack, and a angle grinder, have done it myself. A bit more annoying yes, but possible

[@justme8410]

MG James FIN fuck off. This dude is a joke.

[@AlijahxMedia]

MG James FIN THANK YOU! I Was Thinking/Saying The Same Thing!!

[@danielschroth1120]

yeah just get a buddy and have some fun with it :)!

[@evinowens]

Well said

[@Brownhash]

Downshift to 2nd and at 3k RPMs tap the gas a few times and you’ll hear some loud pops.

[@nash2271]

Brownhash or rev up to 4K then feather push the gas paddle and you will here a machine gun

[@jamesneto7321]

just rev up to 3k in second and feather the gas down to 2k and give it more gas up to 3k-3.5k

[@wrathofdiablo]

Great job man. I really like how you americans do everything by yourself. You've got some KiLLeR tools in your garage mate!

[@MultiDemonblade]

BeemerE90 gay

[@HCD488]

If I would do this in Switzerland and the police would see this It would mean my car isn't legal and they would take it and I would have some big problems

[@maxwell5428]

Saabstyle yeah we got a lot of freedom to work on cars some places in America

[@HCD488]

@@maxwell5428 I really wish It would be diffrent here they plan by 2020 ist a DP rule that say how many decibel are allowed by how many Horsepower for example 300HP will bi 74 dp 400HP 78dp so you won't be able to change anything ....

[@HCD488]

I mean Db decibel 🙄😂

[@G11IFPS]

Left exhaust tip pair is hanging down the left side

[@TheMateusxs]

I miss here a comparison before and after :(

[@JDCarsChannel]

I know! I forgot to record a before shot. Sorry!

[@victorc1611]

@@JDCarsChannel Hey JD, I wonder if this would work on a F10 550i with stock mufflers 🤔. What did you do with the flap actuator and vacuum lines? Did you cut and tucked away? Any CEL codes? Didn't noticed it on the video. Thanks for your response. Keep the content coming, love your videos; very informative.

[@Yosemite3.0cc]

7:23 can you make a video on how to enter the car that fast

[@Shad0wC0mpany2]

Lmfao 😂

[@brittc.6703]

LMFAOOOO

[@walkereurosport944]

Awesome car 👍, awesome vid ... Keep it coming 👌

[@Jaredhughes17]

No way...ham wen...thats wild. I have seen like a handful of your vids and never realized this

[@JDCarsChannel]

Hahaha too funny

[@ilhanhalilseyhan6722]

Parts 30$, having all tools 3.000$:) dude you have lift, air etc etc :)

[@Hunterslides]

not hard to jack a car and rent tools

[@stankovic1009]

@@Hunterslides hes saying this guy has a hoist though..lol

[@optiononemarketing]

That lift is bada$$!

[@christophergarcia9218]

So, ive done this exact thing on my back with a saw i borrowed and a 14mm ratchet😂😂 its all about how bad you wanna do it.

[@lukestevenson9745]

I do it all in drive way with 200 $$ worth of tools and have e91 on air bags

[@losxlakers]

Really good content! You make simple projects simple. Often times many people don't know how to do simple hands on projects. This is very simple to do yet I would've never tried unless I saw a detailed video such as this one. Do you have an engineering background? Seems like people with an engineering degree know how to do cool hands on things (a lost trade in America). I don't know why KZbin recommended this video to me, but I'm glad I found it. You have a new subscriber!

[@MK-xw1rp]

Bro I love it it banana s the sound an everything I love the way u film it step by step no skipping seems let me know when undo the muffler an cold intake an stuff like that

[@HiYebba]

This was hella clean

[@Top_g80comp]

Sound perfect 👌🏻

[@nemolung8281]

Sounds great 😌

[@4x4runr]

Sounds great!!!

[@vntryx]

Beautiful sound

[@schaff70]

thanks for the video and especially the links for the band clamps. This will let me remove the resonator on my GX460 instead of paying a shop $200

[@JDCarsChannel]

Of course! Glad to help

[@ZacBernasconi]

Good informative video

[@That335Guy]

Sounds awesome man I think that's perfect for what I want.

[@stevew145]

Straight through resonators like that usually decrease back pressure in an exhaust and make power. The sound pressure pulses it is deadening is building up in the packing, making a high pressure area inside the packing, the air going through the resonator slides more easily over this high pressure air than it does along the side of a pipe.

[@christopherdaniel2747]

After surching for a way to make my honda sound the best I found that a good resonator is all you need it works better than any muffler you could ever buy and actually if you ditch the muffler that car sounds way better

[@martynm.449]

Sounds nice!

[@JDCarsChannel]

Thanks Martyn!

[@livingwithprynce844]

Your dad riding clean... Damn Pops... Big boi Status!!

[@f3irty278]

This is awesome, think I may try this now was wondering if I could with just clamps. Side note, it’s too late now but I think you should have gone M Sport bumpers, the replica M3 style for whatever reason never look OEM, but if you like em it’s all that matters. Love the channel man.

[@Luuuugn]

indeed, super nice car and sounds good but quad exhausts and m3 replica never works... much cleaner with m sport, nice fitment on wheels wtc... btter with m perfomance kit

[@sirsmack]

Perfect! Thank you

[@JDCarsChannel]

You're welcome! Glad the video helped

[@sAmiZZle82]

Very cool mod, great job! Would've been great to hear the before sound to compare it to!

[@JDCarsChannel]

Thanks! I know! I was too excited and forgot to get before sound clips

[@oaktown7509]

And is the 3in pipe over lapping the stock pipe at all or is it fitted to have a little bit of space between stock pipe and new pipe?

[@jcruise876]

Car is stunning and sounds really good, think im gonna do this to my 535

[@JDCarsChannel]

Thanks Leroy! I hope the resonator worked out well on your 535

[@jcruise876]

@@JDCarsChannel it didn't, car sounds the same 😄 gonna put the res back and do a muffler delete

[@r8228c]

Sounds great, well done on the diy, looks good too. You should tune it if you haven't already.

[@JDCarsChannel]

Thanks! Tune coming soon!

[@StackUpIncorporated]

does it really sound great with just only a resonator delete? cause im thinking of doing a resonator delete and having a muffler put back on.

[@handerson3202]

I think it sounds great.

[@Rgj68123]

Great vid man and also very nice car. I wonder if this would be similar for resonator delete on f10

[@JDCarsChannel]

Thank you! I bet it would be somewhat similar, but I'm not sure

[@cbanks7840]

Nice!!!!

[@yeahyourerightheresmystupi5352]

Any issues in mass when it comes to inspection with no resonator ?

[@langamaphumulo5009]

Sounds beautiful,thanks for this video i learnt something.

[@acosta88ful]

I appreciate the video. I was confused about what to do to my exhaust and now I know that a res delete should be perfect, maybe a downpipe to add even more throatiness! And I got some quad tips with a diffuser conversion too so your quad tips got me even more excited 🏁😁

[@JDCarsChannel]

Awesome! Where did you find the quad tip conversion?

[@oaktown7509]

Does the link you posted for the pipe fit the f10 exhaust? I'm assuming they're all the same diameter

[@fliksmileyface6889]

Where did you get those wheels? and what offset, width etc.

[@jkronick6615]

Hey do you get around the exhaust laws in Mass? I’m trying to mod the exhaust on my car

[@josuecarvalho3248]

Good tip. Nice and cheap

[@JDCarsChannel]

Thanks! Definitely worth the couple bucks.

[@sb8536]

Hello, do you know what the inside diameter is from the small begin and end section it's too weld a straight pipe in the resonator because in my country it's illegal to do any modification to the exhaust

[@plasticgod307496]

So how much did you trim off on both sides? How long was the pipe after?

[@benjibuehler6237]

once you take out the resonator do you have to replace it with a pipe?

[@faroos26]

Your work is very clean and satisfying 👍🏼

[@alexplowski552]

Great video and explanation, I prefer an aftermarket flow through muffler instead of the stock unit. The 335 N54 sounds great without any muffler or resonator but as we all know, it warrants some unnecessary attention. Lol

[@IdkIdk-xp2kf]

What size band clamps were used also awesome video

[@garrettl4777]

Does it have to be 3" straight pipe or can I use a 2.5" straight pipe to replace the resonator?

[@fredrikiien480]

Straight pipe it!! More agressive sound to the car and louder bangs

[@seanpaul3050]

Hey JD. How many cats on this exhaust when this video was shot ? is it 2 or 4 ? Car sounds about right - wouldn't really want it much louder than that, or turn it into a popcorn machine, because it would get really annoying after a while.

[@tylertyler965]

these burble sounds good! just curious did you do some ECU tuning or just stock with resonator delete only

[@JDCarsChannel]

Thanks! Nope- just the resonator delete 🤙🏻

[@tristansully4648]

MASSACHUSETTS ‼️‼️Lets gooo

[@JDCarsChannel]

You know it guy!

[@JamalKhaffaf]

Cool vid, helpful. Do have a question about the body kit. Can i install M3 oem body kit on a 3 series? Also does the same apply for 4 series? Thx!

[@JDCarsChannel]

I’m not entirely sure. There may be some modifications necessary to do so

[@fontane5892]

the fact that you have a lift in your garage lol, i dont even have enough space to put all my shoes in my closet.

[@Tricky_86]

A man sounds good and looks good, I have a 335i 2008 and I was wondering what should I do a muffler delete or resonator delete or both ?

[@JDCarsChannel]

Start with one or the other and if it's not loud enough do both! Personally, I think a muffler delete would be nice on that car.

[@krystianreyes6469]

Hey cool vid. I wouldn't mind a little more of an aggressive sound, but with out redoing the while exhaust, so this may be an option I'm looking at. Just wondering if it drones in the cabin doing just the resonator delete?

[@jamesmantovani8620]

I'd like to know too

[@JDCarsChannel]

No, the resonator delete does not cause drone

[@jlott9491]

How much did you cut off from each end on the new pipe??

[@rayban8680]

Awesome job! I wonder if that’ll work on a 2016 AMG E63s.

[@riyankhawaja7517]

Did u expand the pipe at all or did u jsut line them up?

[@amjathkhan2004]

That resonator is shallow. What's it eexactly doing to a car, and removing it helps with what? Thanks!

[@PenserSpeterson]

Dope car my guy! It sounds & looks sick! I have a muffler delete + 3.5 inch tips and that alone made a huge difference for me, but I’ve always wanted more of those nasty pops and burbles that your car is making. Definitely going to grab some clamps and cut that resonator out soon. Great video, Cheers m8

[@JDCarsChannel]

Awesome man! Deleting the resonator will definitely help you achieve what you’re looking for!

[@PacsunGuy15]

where did u apply the sealant ? inside the clamps where the two pipes meet ?? cool video. i really enjoyed it btw . i wanna take off one resonator off my bmw 330i e46

[@teezy_s]

de cat if u havent already ...

[@xhallucinat3x_876]

Definitely do it. I have a E46 325i, and I started cutting off mufflers and resonators from the back forward until I was happy. Now it has only cats.... The sound is worth it!!

[@JDCarsChannel]

Yes, inside the clamps where the two pipes meet. I'm glad you enjoyed the video!

[@petryyyyy]

How you done your angel eyes so brighter when low beam it’s on !?

[@hussainahaa7298]

I have a 420d 2015 model, do u think it will work?

[@Kipitrl]

Sounds good! Did a muffler delete for awhile then after market exhaust..

[@JDCarsChannel]

Sweet!

[@BB0777]

Nice job. Bro , have the same car with same color and same bodykit. Do you have an idea to make front fenders look wide? (I don't wanna buy f80 oem fenders , headlights etc , simply don't wanna ruin my current kit).

[@hectorespinoza7641]

Would this be the same for a 2007 328i coupe

[@lovepeacepositivityllc]

Difference between exhuasts like axle and cat and resonator deletes, what’s the pros

[@TreySoSuave]

Is the e92 335i exhaust size the same compared to yours?

[@rickhoffman7656]

when will you get the M performances Carbon fiber Trunk spoiler. It will make the rear end alot more aggressive!

[@torodatruth]

Rick Hoffman eew

[@Alex10daysago]

‘I have a 3 inch pipe’

[@michaelwise6970]

I deleted the resonator today, the same thing you did here myself, off of my 2018 F30 330i M Sport, I really wasn't hoping or even thinking it would make a difference in the sound but it actually did. I'm just waiting on my M performance muffler from a 340i to come in, I hope everything goes nice and smooth on the install but I'm not sure exactly what diffuser to get and from where, I mean I'll find it eventually.. But yeah anyways thanks for the video If I didn't see this I probably would have ended up paying over $100 for that. Thx👍

[@JDCarsChannel]

Glad to hear it worked out for you! Hope you enjoy your new M performance muffler!

[@vdia247]

Thanks for the video, awesome. Can you pass the safety car inspection if you do resonator delete?

[@JDCarsChannel]

Where I am from, yes.

[@hugo4470]

What are the gloves you were working with?

[@MK-xw1rp]

Bro ur video was very help an I love the sound to me it sounds awesome man it’s perfect to me can’t wait to cut my shit off lol let me know when u do the muffler whop whop

[@Hoogleyboogleynetwork]

Hey, Im thinking about doing this on my BMW, but I was just wondering what the drone is like.

[@alexandrebalon370]

I did resonator delete and muffler delete on my 330xi e90 and dont have any pops... can anyone tell me why?

[@ArnaldoSantiniChristStrong]

Love it! Did you get any check engine light on?

[@JDCarsChannel]

Thanks! No check engine lights

[@crislopez9460]

What’s the sizing on the pipe you installed?

[@G80_Cory]

Where did you buy your quad exhaust ?

[@DDT0C]

Great video, sounds better than an M3 in my opinion, which I’ve always found too raspy in every exhaust configuration. May have to do this to my 335.

[@tellmeiamwrong]

Lmfao

[@JDCarsChannel]

Thanks man!

[@aidanglass7256]

Am I the only one that started laughing every time he would say 3 inch pipe.

[@Trethongz]

Whatd it sound like before? (Mind you I didn’t look at your previous videos yet

[@JodBronson]

I did that on my Dad's CRX recently, the only thing I notice is the Engine run quieter + smoother. Reason for that is, his Resonator broke inside and it was blocking the Exhaust Flow.

[@JodBronson]

Here is the Video and cost me $5.00, LOL - kzbin.info/www/bejne/jKmUqKSXnKekrbM

[@phizzledUP]

is the pipe you ordered stainless steel or is that not very important?

[@BLLaKaT]

Would this cause a check engine light? Trying to keep my f30 mod free in fear of a check engine light, but I think this would sound good with my M sport exhaust

[@JDCarsChannel]

No check engine light

[@pb65tohyyz64]

Nailed it! When is the spoiler comin ? Haha i got a 535 going to start soon where did you get those bumpers i live in canada

[@JDCarsChannel]

Thanks! The spoiler is on 💪 The bumpers are from Kiesmotorsports. You can use code "JD5" for 5% off!

[@raulvelascos2826]

the pipe is the same measurement for a 328 ?

[@redhorizonentertainment6560]

I just did this today with my 2013 BMW 328i and theres no sound difference. It has stock muffler like in the video. Any help?

[@f30pano]

1 month review? how is it

[@aucool7869]

How well do the band clamps actually stay over time?

[@jdiflams]

I use them on mack trucks (without the muffler sealant he is using) and I've never had any issues

[@machko1]

Try aligning the left tips and nice mod!

[@bela4800]

What is pro and con after cutting the resonator

[@chen3494]

Sound awesome! do you have have cat delete?

[@FalseShxpherd]

This car is coming along really well

[@JDCarsChannel]

Thanks!!

[@rixpix3505]

If you cut the resonator at 18” you don’t have to cut the new pipe... and you leave enough meat on each end of the resonator to reinstall with the clamps...

[@badass1g]

Hahah hell yea good idea

[@MarkEardley1968]

That’s exactly what I was thinking! 👍🏻

[@rohitsproduction8556]

How you paint matched the numbers??

[@dr.haroldweinstein5157]

How tall is your garage ceiling and what lift is that?

[@BatStong]

anyone know if i can do this on a 328i 2016 ? thanks

[@bakihanma335]

what size are the band clamps?

[@rainmouse2]

I have a 2013 BMW X1 with the N20 motor. I have an Afe Power schorcher and an AFE intake. Would my X1 sound ok with this? I noticed the X1 exhaust sound doesnt seem as sporty to begin with as the 328i.. it's still the N20 engine

[@JDCarsChannel]

I can’t say for sure.. try googling some sound clips