Jedi Temple Update chapter 2!

[@KeViNMCMXXCIX]

Solid advice/tip.

[@JoeTheMountainJedi]

Appreciate that man!!... Gonna be "digging deep" into this in the upcoming video!

[@alienworkshop37]

Good job Joe. The ran when parked series is my favorite on KZbin currently.

[@WildRider]

I use the 1/4 stuff for my water line for my fridge.

[@JoeTheMountainJedi]

Haven't used it for my fridge, cause I'm paranoid about coming home to a lake in my kitchen, so 30 bux worth of really sexxy looking braided hose gets to hide in the dark, and never be seen🤦

[@WiSeNhEiMeR-1369]

HOWdy J-T-M-J, ... Thanks COOP the WiSeNhEiMeR from Richmond, INDIANA ...

[@tjjccc]

Cussing and drinking are a few of my favorite things.

[@pitbullaircooled6075]

that push lock hose fittings stuff is pretty cool .. been using it for years in the air tool repair business .👍

[@JoeTheMountainJedi]

Ain't gonna lie.....i was VERY pessimistic about it at first when we installed it at TRF....had to eat a little crow on that one!!!

[@josephdavis1797]

Keep doing what you doing thanks for sharing 👍

[@JoeTheMountainJedi]

Hey brother, I appreciate you taking the time to watch and hang out with us 👍

[@flashgordon2816]

Old DeVilbiss I've had for years needs a shut off switch or diaphragm replaced(need to do an exploratory on it) as it doesn't always cut out when it reaches high pressure limit setting...Still usable but have to manually shut it off after it runs without a large CFM load on it...i.e. keep a close eye on pressure gauge & unplug after use ...Have a smaller Porter Cable pancake & assortment of battery inflators so old Devilbiss(Identical to older Campbell Hausfeld) doesn't get used as much as it once did...Another one of those "Get-round-tuit" projects.(Like your Gates parts washer?..🤣) + so many battery pack tools that have replaced allot of air drive in recent years...>> Looks like a quick & easy way to air "pipe" a shop...I need a larger shop & larger compressor before I worry about running air plumbing...😁 Looking forward to your content on subject for when that knowledge is needed. Previous comment below viewer mentioned "Shark-Bite" connectors for air pipes..It does look similar to Shark Bite + PEX design...>>> 1:14 "IDK if Dr.'s got a pill to stiffen that up or not."...LMAO! 🤣🤣🤣

[@JoeTheMountainJedi]

Sounds like you need to find a new pressure cycling switch.....we "kill one" every few years at TRF because we work our shop compressor like a borrowed mule!!

[@blueridge_ogre1714]

If you had a California quiet compressor, you wouldn't hear that leak at all.

[@JoeTheMountainJedi]

Thankfully, I do NOT own one of those "audible abomination" type air compressors🤣🤣

[@shelby.daytona6890]

Best comment ever...😅

[@sbax9634]

G'day from down under mate! Keep making those vid's Joe, we love ya.

[@JoeTheMountainJedi]

And I appreciate the hell outta you too mate!!!.... Love you guys from that end of the planet, you're my kind of weird 🤩🤘

[@RockAnAhardSpot]

Ha! I am starting to think I have some kind of hidden spy cam in my garage. LOL I wrestle with a chinesium air hose everyday since my old school 100 ft rubber one got a hole in it. Just being lazy I replaced it real fast with one I got for ten bucks. still cleaning stuff up though so gotta get that all done. wow that kit is something I have never seen. I will be looking that up. I was thinking of running pipe so I could distance myself from the monster air compressor. I got spoiled with that set up back in the day when I worked Building Tire molds for kelly springfeild. so Nice to have air and not California Quiet in your ears. LOL

[@JoeTheMountainJedi]

Yeah, my compressor is nearly "that bad", but it does still make some noise.....I'll be doing a "follow up" on this installment later down the road when I get to a point where I can invest the time in moving the racket out of the shop while STILL keeping the compressor inside......got a sneaky trick for that😁

[@tattoowho]

Looking forward to the new video.

[@JoeTheMountainJedi]

Hope I can make it worth the wait for ya man!!

[@RonConsumer]

Looking forward to that install... I've always used Schedule 40 PVC to run all my air lines all over the garage and to the outside. This looks like an easier way to do this.

[@JoeTheMountainJedi]

As did I ....plumbed several buildings with PVC over the years, and honestly, this stuff is both cheaper, and easier to install than the old "cut and glue" method!

[@JasonsMichalainious]

Mad respect to Jedi Joe.,U da man brother

[@JoeTheMountainJedi]

Appreciate you hanging in there with me man!!!🤘

[@upchuckchops]

A shark bite for air hoses?!?way cool.

[@RobertYonng]

Not the same, has been around for decades

[@upchuckchops]

@@RobertYonng new to me

[@JoeTheMountainJedi]

I was very suspicious of it, not gonna lie.....I've plumbed SEVERAL shops with PVC pipe over the years, and after seeing how this held up in a "real world environment" at TRF, I figured I'd take the plunge!!

[@IndigenousSteed]

What are the shops I worked at doing heavy duty mechanics we did the whole place in PEX and surprisingly until -40 it was pretty good and then we learned to drain the tanks daily😂

[@azlua.the.roadglide]

They are called festo fittings

[@joemuellerleile5544]

What kit is that? Where did you get it from. thanks

[@JoeTheMountainJedi]

I'll make SURE I get the links posted in the full vid on this one .... shooting for Thursday night to have it up

[@neilsevery2209]

Hey Joe, Neil here from Maine! Love your videos and thanks for sharing your knowledge on bikes! I’m gonna keep watching and wanna be a patron too! And I asked in a different video About that S&S air cleaner that came off your sons bike! Would love it for my 85 ironhead sporty?? Wanna sell it?

[@JoeTheMountainJedi]

I'll ask him .....it's his "junk" so that's between you and him 🤣..... That backplate is patterned for a butterfly keihin carb tho, but I'm pretty sure I have a backplate for a s&s if that's what you have!

[@JoeTheMountainJedi]

@@neilsevery2209talked to the boy on that air cleaner, and if you want it I need to know what carb you have!!... Either way, I can get it up to ya for 50 shekels....just let me know!

[@Murph80ci]

Looks like a Rock Chucker press on the bench there

[@JoeTheMountainJedi]

@@Murph80ci good eyeball!!... It has a load master, a APP, and a old Spartan t6hole turret for neighbors....I used to have a pair of pro 1k progressives as well, but I sold those after I got the load master dialed in, along with the APP press

[@joeystromboli65]

Looking forward to your content brother

[@JoeTheMountainJedi]

Appreciate you sharing your brain space with me brother!!!

[@wesleyfeltner5946]

Well...if u ain't bleedin you ain't doin it right. Lol

[@WordsFromAnOldMan-k7v]

Thank you Joe

[@juliancrooks3031]

I really like the channel, keep it up

[@JoeTheMountainJedi]

Appreciate it man!!!... Mostly, I'm flying by the seat of my pants here, BUT!!!.... If there isn't a "plan", then nothing can disrupt "the plan"!!😂

[@andyreid7274]

Most expensive sound in the shop, aside from a 10000 dollar engine falling off the lift.

[@JoeTheMountainJedi]

No kidding!!!

[@s.gossett5966]

I plumbed mine with gas pipe, kind of wishing i had gone that way instead.

[@JoeTheMountainJedi]

I did a shop with black pipe once!!.... Talk about a ton of work, and "aftercare" with rust buildup!!.... I swore NEVER AGAIN after that little encounter!!!

[@jeremiahnewell]

If airhose inflation lasts longer than 4 hours, just give it a few more ugga duggas

[@JoeTheMountainJedi]

☝️☝️☝️🤣

[@robertbelote5273]

Thats freekin amazing , thanks man!!

[@JoeTheMountainJedi]

Hang in there man ...I'm probably gonna "overdoo it" on the install, but I'm damned sure gonna have air where I want/need it!!!

[@kennethanderson1685]

❤

[@davehowie03]

What’s the name and brand air hose kit? If you said it I missed it.

[@JoeTheMountainJedi]

@@davehowie03 I'll make sure to post up a link in the full vid....there's a lot of options out there, and I'll go over the pros/cons of these kits, and their price points in the video to give folks some options!!👍

[@davehowie03]

@@JoeTheMountainJedi that’s a video I look forward to seeing.

[@blueheelerfriend8450]

Cool!

[@JoeTheMountainJedi]

Thanks brother 🤘

[@dutchyjhome]

Hey Joe, your microphone seems not to be able to handle the volume of your voice very well; the microphone seems to drown out a lot, which does not help the sound quality. There are at least 2 solutions for this: speak softer or reset the microphone sensitivity. Maybe Josh can help you with this... The information on your channel you are sharing with us is of a grand importance, it therefor would be very nice if we actually can hear what you're saying and that we don't need to have to guess what you're saying, since your microphone obviously has trouble coping with the volume of your voice. A small adjustment may do the trick!

[@JoeTheMountainJedi]

@@dutchyjhome to be completely honest, the issue is appearing to be coming from my camera itself ....Ive used multiple different settings on my mics, and it always seems to "wander" with my uploaded videos .....a camera upgrade is definitely on the short list, but for now I have to do the best I can with stabilizing the audio thru editing software 🤷

[@dutchyjhome]

@@JoeTheMountainJedi Yes, well just as you know it's there to improve on day ;-) No worries I still watch your video's anyway 👍😁

[@JoeTheMountainJedi]

​@@dutchyjhomethanks man!!... Someday, I'll get a handle on all the techie -nerd stuff 🤣

[@dutchyjhome]

@@JoeTheMountainJedi Yeah right: Techie-nerd Joe the Mountain Jedi 🤣🤣🤣

[@Phillzillaa]

🤘🤘🤘

[@christopherw4527]

I'm liking your channel until it is after 720 pixels.

[@JoeTheMountainJedi]

@@christopherw4527 no disrespect intended here, but what exactly are do you mean??.... I'm still kludging my way thru learning the A/V side of things and genuinely would like to know if there's a problem here!!

[@christopherw4527]

@@JoeTheMountainJediShoot. There ain't no problem. I just love how the best channels are built slowly without corporate money. I appreciate your knowledge. Guy just can't buy all the fancy camera gear in the world at first. I just meant I don't care about the video being 720 pixels. Really, I just wanted to leave a comment because I heard it helps the channel? Ignore me. I didn't mean anything negative. The opposite really

[@JoeTheMountainJedi]

Absolutely not, and I appreciate the feedback!!!! Interaction in the comments is something that I make a point to allocate time for, wether it helps the channel stats or not!!!.... Camera wise, I've not tried anything past 720 because I was using a different editing software until here recently, but I'm down to give it a shot on the upcoming videos!!(My old software I was using was PAINFULLY slow at anything above 720🤦....live and learn!!)

[@christopherw4527]

@@JoeTheMountainJedi Well, I can't use any software. You are ahead of me on about a thousand different levels.

[@glenmclendon9209]

See you then .

[@JoeTheMountainJedi]

Shooting for Thursday on the full vid on this one man!!