My 1999 Jeep Cherokee Xj has almost 350,000 miles and is just like new..It even has the original cat and oxygen sensors.The 4.0 Jeep Beast is one of the best vehicles ever made.
@johnnyc.85582 жыл бұрын
XJ's are cool too!!! I now have 5 of them!!
@michaelrivera92684 жыл бұрын
I have a ball joint press and I couldn’t use on the passenger side because it’s just two thin separated walls and the one side would collapse.. so I had to chisel it out from the top.. hopefully the new ones go right in with the ball joint press.
@yungcheek33043 жыл бұрын
I put 2 crescent wrenches in there to keep it from collapsing and it worked great 👍🏽
@scooter02413 жыл бұрын
3 link long arm kit eliminates passenger side arm. Now I only have to replace the drive side bushing, ppeeeww.
@nugentcj775 жыл бұрын
Any video in which the mechanic uses the term 'wallered out' gets my vote. I salute you, sir. LOL
@Jeeptalkshow4 жыл бұрын
Another clunking and shifting noise can be the driver's side motor mount.
@sparkie5571 Жыл бұрын
even 5 years later, got confirmation here to make sure i really had to go out and get one of those press tools!
@carlt81882 жыл бұрын
Air chisel gets em out real nice.
@hayzersolar6 ай бұрын
what a track rod? that is a upper control arm.
@austinclare59004 жыл бұрын
I like how you say big tires and lift mean ego and lower control arms = ego 😂 last time I looked at it a lift and bigger tires are for cearlance and articulation lol unless your referring to the customer because he's having a shop do it instead if himself 🤣
@tomthumb2815 Жыл бұрын
Angle grinder and chisel. Ask me how i know . If axle is hanging low its pretty easy to cut with chisel
@svborek5 жыл бұрын
1 week too late on me finding this. Removed mine last weekend. Mine was worn on the topside not axle side.
@bdr51505 жыл бұрын
svborek 1975 how did you get yours out? Im about to do mine before i put the lift on.
@opnavesea5 жыл бұрын
when i try to use the press (driver side bushing) it wants to walk at an angle and push the ratchet end into my oil pan the more i tighten till i cant go any further . i have not found a way to keep the press straight jeeps not lifted and the it's is on jacks not a fancy lift the axle is as low as i can take it without dropping it off completely
@johnnyc.85582 жыл бұрын
I see a young Irish Red and White Setter!!! Rooooooo!
@02jeepwj5 жыл бұрын
xj zj and wjs is where its at
@SarahSmith-hd8kd5 жыл бұрын
You forgot TJs they don't fit your buddy's in as well but they are great.
@fabguy2762 жыл бұрын
Nice Trackrod!
@williamnagel26545 жыл бұрын
Just watched a video to remove bushings without the ball joint tool
@cazaresf0573 жыл бұрын
How?
@mariachiforhire35463 жыл бұрын
@@cazaresf057 I saw one, but they used a pitman removal tool.
@virginmobile58004 жыл бұрын
where would i get the axle support bushing for the passenger side upper control arm
@GuerillaJib5 жыл бұрын
Did it stop the clunking?
@2stroketurbo5 жыл бұрын
Yes . Sure did.
@NJVINNIE1992 жыл бұрын
LOL for those doing this job on their back with few tools Good luck, you're gonna need it, but it can be done. He forgot about the part of lining up the bolts, you'll need a "Come Along"
@ElYorch13 жыл бұрын
Where did you buy your bushing from?
@SamVeneman Жыл бұрын
its just a moog thing. Part No. K3128
@tattedbass823 жыл бұрын
what's the part # on the replacement bushings?
@SamVeneman Жыл бұрын
Part No. K3128
@matthewnegrete62302 жыл бұрын
"Haven't seen any videos on how to replace bushings, so I'll explain it"